arXiv ScienceSearch

arXiv subjects

Axel Neumann

Publications and source records attributed to Axel Neumann.

5 recordsLinked to original sources

Stable Multi-Step Rollouts via Uncertainty-Guided Hybrid Dynamics

Multi-step rollouts are essential for model-based reinforcement learning (RL) and predictive control, yet learned dynamics models often become unstable when recursively applied, leading to divergence and unreliable policy updates. This paper proposes a model-agnostic hybrid dynamics framework that blends a provably contracting nominal model with a flexible excursion model through an uncertainty-guided switching law. The switching signal is derived from calibrated epistemic uncertainty and activates only when the system leaves the nominal region, ensuring that each model operates within its reliability regime. Under clearly stated smoothness and boundedness assumptions, we show that the resulting hybrid predictor yields globally bounded recursive multi-step rollouts: trajectories remain Lyapunov-stable in the nominal region and exhibit at most affine growth during excursions. To illustrate the theory in practice, we instantiate the hybrid dynamics framework within a model-based RL scheme that uses real one-step transitions for value learning and hybrid rollouts for policy improvement. Experiments on a nonlinear Duffing oscillator demonstrate stable long-horizon prediction and improved cost-effort trade-offs relative to a stabilizing baseline.

eess.SY

KIND: A Kalman-Inspired Adaptive Estimator for SRF Cavity Detuning

Superconducting radio frequency cavities with a high quality factor enable energy-efficient accelerator operation but are very sensitive to mechanical disturbances that detune their resonance. Accurate detuning estimation is therefore essential for efficient resonance control and stable beam conditions. This paper introduces Kalman-Inspired Neural Decomposition (KIND), a data-driven estimator that fuses a Dynamic Mode Decomposition model for stationary modal behavior with a Transformer-based predictor for transient dynamics. KIND further outputs learned uncertainty signals that indicate regime changes, enabling anomaly detection. Using operational cavity data, we compare KIND with a classical Kalman filtering baseline and discuss its potential as a foundation for future uncertainty-aware, forecast-based control.

eess.SY

Improved RF Performance of Niobium Cavities via In-situ Vacuum Heat Treatment Technique

Vacuum thermal treatments (baking) are known to improve the superconducting properties of the RF surface layer of niobium cavities, and are employed as a last processing step to increase their efficiency determined by intrinsic quality factor Q0. A new method to perform the baking has been demonstrated. It consists in annealing of an evacuated cavity with the local heaters installed on its outer surface in a cryostat which ensures an exterior vacuum and protects the outer cavity surface from oxidation. Such a set-up has a number of advantages as it does not require to cool the cavity flanges during baking, and allows to perform the "cold" RF characterization of the cavity in situ, immediately after the thermal treatment without disassembly of heating elements. Moreover, the air exposure that causes partial degradation of Q0 by surface reoxidation is avoided. The heat treatment of a single-cell 1.3 GHz niobium cavity at 230 {\deg}C for 24 h demonstrated the doubling of Q0 at Eacc=10 MV/m (from 1.20e10 to 2.4e10) and retained the maximal accelerating field of 35 MV/m without quenching. The selection of treatment parameters is based on our previous XPS studies. This treatment ensures incomplete dissolution of the native oxide by oxygen diffusion, thereby preventing interaction of niobium surface with external contaminants. We propose to bake the cavities directly in a cryomodule, which would allow to use the treatment to improve their performance. The potential impact of material parameters on the components of surface resistance has been briefly examined.

physics.acc-ph

The Development of Energy-Recovery Linacs

Energy-recovery linacs (ERLs) have been emphasised by the recent (2020) update of the European Strategy for Particle Physics as one of the most promising technologies for the accelerator base of future high-energy physics. The current paper has been written as a base document to support and specify details of the recently published European roadmap for the development of energy-recovery linacs. The paper summarises the previous achievements on ERLs and the status of the field and its basic technology items. The main possible future contributions and applications of ERLs to particle and nuclear physics as well as industrial developments are presented. The paper includes a vision for the further future, beyond 2030, as well as a comparative data base for the main existing and forthcoming ERL facilities. A series of continuous innovations, such as on intense electron sources or high-quality superconducting cavity technology, will massively contribute to the development of accelerator physics at large. Industrial applications are potentially revolutionary and may carry the development of ERLs much further, establishing another shining example of the impact of particle physics on society and its technical foundation with a special view on sustaining nature.

physics.acc-ph

Scientific opportunies for bERLinPro 2020+, report with ideas and conclusions from bERLinProCamp 2019

The Energy Recovery Linac (ERL) paradigm offers the promise to generate intense electron beams of superior quality with extremely small six-dimensional phase space for many applications in the physical sciences, materials science, chemistry, health, information technology and security. Helmholtz-Zentrum Berlin started in 2010 an intensive R\&D programme to address the challenges related to the ERL as driver for future light sources by setting up the bERLinPro (Berlin ERL Project) ERL with 50 MeV beam energy and high average current. The project is close to reach its major milestone in 2020, acceleration and recovery of a high brightness electron beam. The goal of bERLinProCamp 2019 was to discuss scientific opportunities for bERLinPro 2020+. bERLinProCamp 2019 was held on Tue, 17.09.2019 at Helmholtz-Zentrum Berlin, Berlin, Germany. This paper summarizes the main themes and output of the workshop.

physics.acc-ph