arXiv subjects

Axel Lindner

Publications and source records attributed to Axel Lindner.

At least 19 recordsLinked to original sources

arXiv2026

Overview and design optimization of a custom hybrid X-ray telescope for the International Axion Observatory (IAXO)

We present the design optimization for maximizing the effective area of a custom X-ray optic for the International Axion Observatory (IAXO) and BabyIAXO, including its novel hybrid configuration that enables full coverage of the 700-mm-diameter magnetic bore with minimal stress imposed on the mirrors; shell layout optimized for axion spectra and spatial distribution; and the coating recipes that enhance reflectivity in the energy range of interest. We evaluate how these design choices improve the observation signal-to-noise ratio (SNR) of BabyIAXO and IAXO by calculating the broad-band effective area and simulating the point spread function (PSF) and focal spot at the detector plane. The cost-effective and scalable optic offers an energy response from 0.03--15 keV, achieving an effective area that exceeds 2400 cm$^2$ near 1 keV - the peak of the ABC axion spectrum - and remains above 1700 cm$^2$ around 3 keV - the peak of the Primakoff axion spectrum. It yields a half-power diameter (HPD) of $\sim 46^{\prime\prime}$ for an on-axis point source at infinity, and a focal-spot HPD of $\sim 120^{\prime\prime}$ for the radial distribution expected for axion signals within the approximately $3^{\prime}$-radius solar core. A relatively generous fabrication-error budget is also summarized. The custom optic, accounting for fabrication errors, is anticipated to deliver a more than $55$-fold enhancement in the SNR.

physics.ins-det↗

arXiv2026

Characterization of a Two-Channel Optical and Near-infrared Transition Edge Sensor System for Rare-Event Searches

Transition edge sensors (TESs) are superconducting energy-resolving microcalorimeters that have demonstrated low background rates as well as quantum efficiencies close to unity for photons at optical and near-infrared wavelengths. This makes these detectors well suited for rare-event searches. We report on the comprehensive characterization of a two-channel detector module consisting of two tungsten TESs optimized for the detection of photons with a wavelength of 1064nm. The devices achieve a system detection efficiency of $(86\pm1)$%, an energy resolution better than 7%, and a background dark-count rate of photon-like events below 6mHz when coupled to an optical fiber. Using an unbinned likelihood framework, we find the dark count rate to be compatible with blackbody radiation from the room-temperature laboratory environment. Thanks to the energy resolution of the TESs, we show that it is possible to detect monochromatic signals at 1064nm with photon rates $\geqslant 2.7_{-0.6}^{+0.8} \times10^{-5}$Hz, which corresponds to a power of $\geqslant(5.0_{-1.1}^{+1.4})\times10^{-24}$W, within 20 days of measurement time at the 5$\sigma$ confidence level. This makes our detectors well suited for searches for hypothetical axions and axion-like particles with experiments such as the Any Light Particle Search II (ALPS II) or axion interferometers. The developed methodologies are not only applicable to axion searches, but are also relevant for rare-event searches with TESs in general.

physics.ins-det↗

arXiv2026

The COSMIC WISPers White Paper: The physics case for Weakly Interacting Slim Particles

Axions and other very weakly interacting slim particles (WISPs), with masses below 1 GeV, arise naturally in many extensions of the Standard Model of particle physics. In particular, they could offer a new framework to explain the nature of dark matter and may help address a range of puzzling observations in astrophysics and particle physics. This review provides an overview of ongoing WISP searches and outlines the prospects for the next decade, spanning their theoretical motivation, indirect signatures in astrophysical observations, and dedicated laboratory experiments. It is based on the work carried on by the EU-funded COST Action ``Cosmic WISPers in the Dark Universe: Theory, astrophysics, and experiments'' (CA21106, https://www.cost.eu/actions/CA21106). This network plays a key role in coordinating and supporting WISP searches across Europe, while also contributing to the development of a roadmap aimed at securing European leadership in this research area. It is emphasized that Europe is currently pursuing a rich, diverse, and cost-effective experimental program, with the potential to deliver one or more transformative discoveries.

hep-ph↗

arXiv2026

A centimeter-sized gas pressure sensor for high-vacuum measurements at cryogenic temperatures

Gas pressure sensors based on nanomechanical membranes have recently demonstrated an ultra-wide ten-decade measurement range, a gas-type-independent response, and a self-calibrating operation with uncertainties of approximately $1\,\%$. The readout relied on tabletop free-space laser interferometers. Here we present a centimeter-sized, portable implementation in which a square Si$_3$N$_4$ membrane is read out via a fiber-based laser interferometer. We perform pressure measurements between $5\times10^{-5}$ and $10^{-1}$~mbar in a confined $0.7$~L volume cooled to $78$~K. Because no suitable commercial pressure sensor exists for direct cryogenic comparison, we benchmark our device against room-temperature commercial gauges connected to the cold volume through a pipe of limited conductance. The measured relationship between the two sensors is compared with models accounting for temperature- and pumping-induced pressure gradients within the measurement chamber. These models agree with the measurements to within $<10\,\%$ for helium and $<13\,\%$ for nitrogen. The achieved readout sensitivity of $S_x = 8\times10^{-14}\,\mathrm{m}/\sqrt{\mathrm{Hz}}$ theoretically enables resolving the thermal displacement noise spectrum of a trampoline membrane at atmospheric pressure, with a peak response of $48\,S_x$ $\left(25\,S_x\right)$ at $295\,\mathrm{K}$ $\left(78\,\mathrm{K}\right)$. Our results suggest that the previously achieved pressure measurement range of ten decades with trampoline membranes is compatible with fiber-based optical readout. This paves the way for widely applicable pressure sensors in the centimeter size range in cryogenic environments.

physics.app-ph↗

arXiv2026

Any Light Particle Searches with ALPS II: Description of the first science campaign

From February to May of 2024 the Any Light Particle Search II (ALPS II) conducted its first science campaign using the `light-shining-through-a-wall' technique to search for pseudo-Goldstone bosons that lie beyond the Standard Model of particle physics and which are inaccessible by accelerator-based experiments. The experimental setup consists of two strings of superconducting dipole magnets, each more than 100 m long, that are separated by a wall. Laser light is directed through the first magnet string and a heterodyne detection system is used to measure the electromagnetic power that traverses a wall via the conversion to and then from a bosonic field. After the wall, a high-finesse optical cavity resonantly enhances the signal power. Two searches were carried out, one with the laser polarized perpendicular to the magnetic field direction and another with its polarization state aligned parallel to the magnetic field. No evidence for the existence of new bosons was found. In its first science campaign, ALPS II reached photon-boson conversion probability sensitivities of a few $10^{-13}$. The ongoing upgrade of the optical system aims to increase this sensitivity by about four orders of magnitude.

hep-ex↗

arXiv2026

Design and construction of a cryogenic subcooler-box for supplying single phase supercritical helium to dark matter and gravitational wave experiments

We report on the design, development, and installation of the ALPS Cryo-Platform Subcooler Box (ACPS), which is part of the cryogenic platform being established in the HERA North Hall at DESY to supply helium for cooling large-scale dark-matter and gravitational-wave experiments with very high heat loads. The ACPS is capable of subcooling supercritical helium supplied via the 1.6-km-long HERA transfer line by means of a pipe heat exchanger immersed in a subcooler bath filled with liquid helium produced through Joule-Thomson valves. It is also equipped with numerous cryogenic components, including control valves, flow meters, and safety valves, enabling experimental operation to be carried out directly by the ACPS itself and thereby reducing the cryogenic requirements imposed on the experiments. To support a wide range of experiments, the ACPS provides three transfer lines that deliver different levels of cooling power.

physics.ins-det↗

arXiv2025

Any Light Particle Searches with ALPS II: first science results

The light-shining-through-a-wall experiment ALPS II at DESY in Hamburg searched for axions and similar lightweight particles in its first science campaign from February to May 2024. No evidence for the existence of such particles was found. For pseudoscalar bosons like the axion, with masses below about 0.1 meV, we achieved a limit for the di-photon coupling strength of 1.5e-9 1/GeV at a 95% confidence level. This is more than a factor of 20 improvement compared to all previous similar experiments. We also provide limits on photon interactions for scalar, vector and tensor bosons. An achievement of this first science campaign is the demonstration of stable operation and robust calibration of the complex experiment. Currently, the optical system of ALPS II is being upgraded aiming for another two orders of magnitude sensitivity increase.

hep-ex↗

arXiv2025

Binary Classification of Light and Dark Time Traces of a Transition Edge Sensor Using Convolutional Neural Networks

The Any Light Particle Search II (ALPS II) is a light shining through a wall experiment probing the existence of axions and axion-like particles using a 1064 nm laser source. While ALPS II is already taking data using a heterodyne based detection scheme, cryogenic transition edge sensor (TES) based single-photon detectors are planned to expand the detection system for cross-checking the potential signals, for which a sensitivity on the order of $10^{-24}$ W is required. In order to reach this goal, we have investigated the use of convolutional neural networks (CNN) as binary classifiers to distinguish the experimentally measured 1064 nm photon triggered (light) pulses from background (dark) pulses. Despite extensive hyperparameter optimization, the CNN based binary classifier did not outperform our previously optimized cut-based analysis in terms of detection significance. This suggests that the used approach is not generally suitable for background suppression and improving the energy resolution of the TES. We partly attribute this to the training confusion induced by near-1064 nm black-body photon triggers in the background, which we identified as the limiting background source as concluded in our previous works. However, we argue that the problem ultimately lies in the binary classification based approach and believe that regression models would be better suitable for addressing the energy resolution. Unsupervised machine learning models, in particular neural network based autoencoders, should also be considered potential candidates for the suppression of noise in time traces. While the presented results and associated conclusions are obtained for TES designed to be used in the ALPS II experiment, they should hold equivalently well for any device whose output signal can be considered as a univariate time trace.

physics.ins-det↗

arXiv2025

First direct search for light dark matter interactions in a transition-edge sensor

We propose the use of transition-edge sensor (TES) single-photon detectors as a simultaneous target and sensor for direct dark matter searches, and report results from the first search of this kind. We perform a 489 h science run with a TES device optimized for the detection of 1064 nm photons, with a mass of ~0.2 ng and an energy threshold of ~0.3 eV, and set new limits on dark matter interactions with both electrons and nucleons for dark matter with mass below the MeV scale. With their excellent energy resolution, TESs enable search strategies that are complementary to recent results from superconducting nanowire single-photon detectors and kinetic inductance detectors. We show that next-generation TES arrays hold promise to probe new regions of light dark matter parameter space.

physics.ins-det↗

arXiv2025

Simulation and measurement of Black Body Radiation background in a Transition Edge Sensor

The Any Light Particle Search II (ALPS II) experiment at DESY, Hamburg, is a Light-Shining-through-a-Wall (LSW) experiment aiming to probe the existence of axions and axion-like particles (ALPs), which are candidates for dark matter. Data collection in ALPS II is underway utilizing a heterodyne-based detection scheme. A complementary run for confirmation or as an alternative method is planned using single photon detection, requiring a sensor capable of measuring low-energy photons ($1064\,\mathrm{nm}$, $1.165\,\mathrm{eV}$) with high efficiency (higher than $50\,\%$) and a low background rate (below $7.7\cdot10^{-6}\,\mathrm{cps}$). To meet these requirements, we are investigating a tungsten Transition Edge Sensor (TES) provided by NIST, which operates in its superconducting transition region at millikelvin temperatures. This sensor exploits the drastic change in resistance caused by the absorption of a single photon. We find that the background observed in the setup with a fiber-coupled TES is consistent with Black Body Radiation (BBR) as the primary background contributor. A framework was developed to simulate BBR propagation to the TES under realistic conditions. The framework not only allows the exploration of background reduction strategies, such as improving the TES energy resolution, but also reproduces, within uncertainties, the spectral distribution of the observed background. These simulations have been validated with experimental data, in agreement with the modeled background distribution, and show that the improved energy resolution reduces the background rate in the $1064\,\mathrm{nm}$ signal region by one order of magnitude, to approximately $10^{-4}\,\mathrm{cps}$. However, this rate must be reduced further to meet the ALPS II requirements.

hep-ex↗

arXiv2025

Enhancing European Cooperation in the Search for Dark Matter

The search for dark matter is an exciting topic that is pursued in different communities over a wide range of masses and using a variety of experimental approaches. The result is a strongly correlated matrix of activities across Europe and beyond, both on the experimental and the theoretical side. We suggest to encourage and foster the collaboration of the involved institutions on technical, scientific and organisational level, in order to realise the synergies that are required to increase the impact of dark matter research and to cope with the increasing experiment sizes. The suggested network -- loosely titled "DMInfraNet" -- could be realised as a new initiative of the European strategy or be based on existing structures like iDMEu or DRD. The network can also serve as a nucleus for future joint funding proposals.

hep-ex↗

arXiv2024

Design and Performance of the ALPS II Regeneration Cavity

The Regeneration Cavity (RC) is a critical component of the Any Light Particle Search II (ALPS II) experiment. It increases the signal from possible axions and axion-like particles in the experiment by nearly four orders of magnitude. The total round-trip optical losses of the power circulating in the cavity must be minimized in order to maximize the resonant enhancement of the cavity, which is an important figure of merit for ALPS II. Lower optical losses also increase the cavity storage time and with the 123 meter long ALPS II RC we have demonstrated the longest storage time of a two-mirror optical cavity. We measured a storage time of $7.17 \pm 0.01$ ms, equivalent to a linewidth of 44.4 Hz and a finesse of 27,500 at a wavelength of 1064 nm.

physics.optics↗

arXiv2024

Simulations for direct dark matter searches using ALPS II's TES detection system

Transition Edge Sensors (TES) are superconducting microcalorimeters that can be used for single-photon detection with extremely low backgrounds. When they are within their superconducting transition region, small temperature fluctuations - like the energy deposited by single photons - lead to large resistance variations. These variations can be measured using Superconducting Quantum Interference Devices (SQUIDs). This technology is planned to be used as a single-photon detector for later runs of the ALPS II experiment, a light-shining-through-walls experiment at DESY Hamburg, searching for Axion-Like Particles (ALPs), which are possible Dark Matter (DM) candidates. Due to the very low dark count rates in our setup, our TES system might be viable for direct DM searches at sub-MeV masses through electron-scattering of DM in the superconducting chip, as well. Simulations concerning background rejection and calibration methods demonstrate the needed sub-eV sensitivity already.

hep-ex↗

arXiv2024

Measurement of the thermal accommodation coefficient of helium on a crystalline silicon surface at low-temperatures

Next-generation gravitational wave observatories are expected to use cryogenically cooled, pendulum-suspended 200 kg test mass mirrors from a crystalline material such as crystalline silicon. During operation of the observatories, these mirrors undergo heating due to the absorption of laser radiation of up to a watt. Low noise cooling techniques need to be developed. Low-pressure helium exchange gas at 5 K might contribute to the challenging task. Here, we report the measurement of the helium accommodation coefficient $\alpha(11\,\mathrm{K} 0.7$ for temperatures < 20 K, which increases the cooling power compared to recently used assumptions. The idea of free molecular flow helium gas cooling is thus supported and might find application in some observatory concepts.

physics.ins-det↗

arXiv2023

Self-calibrating gas pressure sensor with a 10-decade measurement range

Recent years have seen a rapid reduction in the intrinsic loss of nanomechanical resonators (i.e., chip-scale mechanical oscillators). As a result, these devices become increasingly sensitive to the friction exerted by smallest amounts of gas. Here, we present the pressure-dependency of a nanomechanical trampoline resonator's quality factor $Q$ over ten decades, from $10^{-7}$ to $10^{3}\,\mathrm{mbar}$. We find that the measured behavior is well-described by a model combining analytical and numerical components for molecular and viscous flow, respectively. This model relies exclusively on design and typical material parameters, together with measured values of intrinsic resonance frequency $f_\mathrm{in}$ and quality factor $Q_\mathrm{in}$. Measuring $f_\mathrm{in}$ and $Q_\mathrm{in}$ at a pressure $<\!10^{-7}\,\mathrm{mbar}$ self-calibrates our sensor over its entire measurement range. For a trampoline's fundamental out-of-plane vibrational mode, the resulting deviation between measured and simulated pressure dependencies of the quality factor and resonance frequency is within $15\,\%$ and $4\,\%$, respectively. The resulting error for pressure values inferred from quality factor and frequency measurements is $<10\,\%$, for pressures between $\sim 10^{-6}$ and $\sim 10^{-1}\,\mathrm{mbar}$, and $<25\,\%$ for the complete 10-decade measurement range. Exceptions are two outliers with increased measurement errors, which might be related to the limited accuracy of our commercial pressure gauge. Based on investigations with helium, we demonstrate the potential for extending this sensing capability to other gases, thereby highlighting the practical use of our sensor.

physics.app-ph↗

arXiv2023

A first application of machine and deep learning for background rejection in the ALPS II TES detector

Axions and axion-like particles are hypothetical particles predicted in extensions of the standard model and are promising cold dark matter candidates. The Any Light Particle Search (ALPS II) experiment is a light-shining-through-the-wall experiment that aims to produce these particles from a strong light source and magnetic field and subsequently detect them through a reconversion into photons. With an expected rate $\sim$ 1 photon per day, a sensitive detection scheme needs to be employed and characterized. One foreseen detector is based on a transition edge sensor (TES). Here, we investigate machine and deep learning algorithms for the rejection of background events recorded with the TES. We also present a first application of convolutional neural networks to classify time series data measured with the TES.

hep-ex↗

arXiv2023

The DESY axion search program

Feebly Interacting Particles (FIPs) might offer the solution to (some of) the open questions beyond the Standard Models of particle physics and cosmology. At DESY in Hamburg, three non-accelerator-based experiments will search for FIPs as dark matter candidates (ALPS II, BabyIAXO) or constituting the dark matter in our home galaxy (MADMAX).

hep-ex↗

arXiv2021

Probing the axion-nucleon coupling with the next generation of axion helioscopes

A finite axion-nucleon coupling, nearly unavoidable for QCD axions, leads to the production of axions via the thermal excitation and subsequent de-excitation of Fe-57 isotopes in the sun. We revise the solar bound on this flux adopting the up to date emission rate, and investigate the sensitivity of the proposed International Axion Observatory IAXO and its intermediate stage BabyIAXO to detect these axions. We compare different realistic experimental options and discuss the model dependence of the signal. Already BabyIAXO has sensitivity far beyond previous solar axion searches via the nucleon coupling and IAXO can improve on this by more than an order of magnitude.

hep-ph↗