arXiv ScienceSearch

arXiv subjects

Axel Hoffmann

Publications and source records attributed to Axel Hoffmann.

At least 19 recordsLinked to original sources

Strong coupling between propagating spin wave and microwave photons in a superconducting resonator

We demonstrate strong coupling between propagating spin wave modes and microwave photons in superconducting resonator-magnetic thin film hybrid circuits. By fabricating the resonator directly on yttrium iron garnet thin films grown on rare-earth-free Y$_3$Sc$_2$Ga$_3$O$_{12}$ substrates, we achieve strong coupling of both Damon-Eshbach and backward-volume spin wave modes to the resonator, with coupling strengths exceeding both the magnon and photon damping rates. Furthermore, we observe nonreciprocal spin wave radiation of the hybrid magnonic mode in the Damon-Eshbach configuration, highlighting the potential for incorporating intrinsic spin-wave nonreciprocity into hybrid magnonic systems. These results open new avenues for integrating spin-wave magnonics with cavity magnonics, and for harnessing spin waves for potential applications in quantum information science.

cond-mat.mes-hall

Magnonic spontaneous oscillation induced by parametric pumping

Spontaneous dynamic systems have attracted significant attention for their rich underlying physics such as phase-locking and synchronization. In this work, we report a new mechanism of generating magnetic spontaneous oscillation via parametric pumping. By applying a pump tone to excite propagating spin waves in a yttrium iron garnet delay line, four-wave mixing converts the pump mode into two phase-autonomous propagating magnon modes, i.e. a spontaneous mode with nearly twice the wavenumber of the pump mode and an idler mode with nearly zero wavenumber. This allows us to reliably generate ultrasharp spin wave dynamics with broad frequency tunability from the pump and magnetic field. We show that the spontaneous mode can be phase-locked to a probe tone, similar to an auto-oscillator. Furthermore, the spontaneous dynamics can be used to implement a high-gain magnonic parametric amplifier with a gain up to 40 dB. Our results open a new avenue for studying nonlinear magnonics and synchronization physics in propagating magnon geometry and for developing new magnonic devices.

cond-mat.mes-hall

The 2026 Skyrmionics Roadmap

Magnetic skyrmions and related topological spin textures have emerged as a central topic in condensed-matter physics, combining fundamental significance with potential for transformative applications in spintronics, magnonics, and beyond. Over the past decade, advances in material platforms, imaging techniques, theoretical modeling, and device concepts have established skyrmionics as a rapidly expanding field. At the same time, challenges remain in stabilizing, controlling, and integrating such textures into functional architectures, while novel phenomena such as antiskyrmions, higher-order skyrmions, hopfions, and antiferromagnetic textures arise. The 2026 Skyrmionics Roadmap represents a collective effort of many authors, providing a comprehensive perspective on the current state-of-the-art and the outlook for the coming years. In 33 focused sections, each co-authored by two researchers, we chart progress in theory and modeling, material systems, skyrmion dynamics, and skyrmion technologies. By offering a consolidated vision, this Roadmap aims to guide both fundamental research and application-driven efforts, accelerating the transition of skyrmionics from conceptual breakthroughs toward practical technologies.

cond-mat.mes-hall

Emulating 2D Materials with Magnons

Spin waves (magnons) in 2D materials have received increasing interest due to their unique states and potential for tunability. However, many interesting features of these systems, including Dirac points and topological states, occur at high frequencies, where experimental probes are limited. Here, we study a crystal formed by patterning a hexagonal array of holes in a perpendicularly magnetized thin film. Through simulation, we find that the magnonic band structure imitates that of graphene, but additionally has some kagome-like character and includes a few flat bands. Surprisingly, its nature can be understood using a 9-band tight-binding Hamiltonian. This clear analogy to 2D materials enables band-gap engineering in 2D, topological magnons along 1D phase boundaries, and spectrally isolated modes at 0D point defects. Interestingly, the 1D phase boundaries allow access to the valley degree of freedom through a magnonic analog of the quantum valley-Hall insulator. These approaches can be extended to other magnonic systems, but are potentially more general due to the simplicity of the model, which resembles existing results from electron, phonon, photon, and cold atom systems. This finding brings the physics of spin waves in 2D materials to more experimentally accessible scales, augments it, and outlines a few principles for controlling magnonic states.

cond-mat.mes-hall

Non-reciprocal Magnetoresistances in Chiral Tellurium

Materials with broken fundamental symmetries, such as chiral crystals, provide a rich playground for exploring unconventional spin-dependent transport phenomena. The interplay between a material's chirality, strong spin-orbit coupling, and charge currents can lead to complex non-reciprocal effects, where electrical resistance depends on the direction of current and magnetic fields. In this study, we systematically investigate the angular dependencies of magnetoresistance in single-crystalline chiral Tellurium (Te). We observe distinct non-reciprocal magnetoresistances for magnetic fields applied along three orthogonal directions: parallel to the current along the chiral axis (z), in the sample plane but perpendicular to the current (y), and out of the sample plane (x). Through detailed analysis of the chirality- and thickness-dependence of the signals, we successfully disentangle multiple coexisting mechanisms. We conclude that the Edelstein effect, arising from the chiral structure's radial spin texture, is responsible for the non-reciprocity along the z-axis. In contrast, the chirality-independent signal along the y-axis is attributed to the Nernst effect, and the non-reciprocity along the x-axis may originate from intrinsic orbital magnetizations. These findings elucidate the complex interplay of spin, orbital, and thermal effects in Te, providing a complete picture of its non-reciprocal transport properties.

cond-mat.mtrl-sci

Magnetostriction and Temperature Dependent Gilbert Damping in Boron Doped Fe$_{80}$Ga$_{20}$ Thin Films

Magnetic thin films with strong magnetoelastic coupling and low Gilbert damping are key materials for many magnetoelectric devices. Here, we investigated the effects of boron doping concentration on magnetostriction and temperature dependent Gilbert damping in magnetron sputtered (Fe$_{80}$Ga$_{20}$)$_{1-x}$B$_{x}$ films. A crystalline to amorphous structural transition was observed for a boron content near 8% and coincided with a decrease in coercivity from 76 Oe to 3 Oe. A 10% doping concentration is optimal for achieving both large magnetostriction of 48.8 ppm and low Gilbert damping of $6 \times 10^{-3}$. The temperature dependence of the damping shows an increase at low temperatures with a peak around 40 K and we associate the relative increase $\Delta\alpha/\alpha_{RT}$ with magnetoelastic contributions to the damping, which has a maximum of 55.7% at 8% boron. An increase in the inhomogeneous linewidth broadening was observed in the structural transition regime at about 8% boron concentration. This study suggests that incorporation of glass forming elements, in this case boron, into Fe$_{80}$Ga$_{20}$ is a practical pathway for simultaneously achieving enhanced magnetoelastic coupling and reduced Gilbert damping.

cond-mat.mtrl-sci

Spin-Torque-Driven Non-uniform Dynamics of an Antivortex Core in Truncated Astroid Shaped Nanomagnets

Spin textures that are not readily available in the domain structures of continuous magnetic thin films can be stabilized when patterned to micro/nano scales due to the dominant effect of dipolar magnetic interactions. Fabrication of such devices enables a thorough study of their RF dynamics excited by highly concentrated spin-polarized/pure-spin currents. For this purpose, in this study, we have employed a truncated astroid geometry to achieve stable magnetic antivortex core nucleation/annihilation which was detectable using the anisotropic magnetoresistance (AMR) at various temperatures. Furthermore, by depositing a soft magnetic thin film (20 nm thick permalloy) capped with a heavy-metal 2nm Pt layer, we were able to probe the spin orbit torque induced excitations accompanied by self-torque due to half-antivortex cores reminiscent of an isolated-antivortex, yielding GHz frequency oscillations with high quality factors (~50000). The observed RF oscillations can be attributed to a non-uniform domain wall oscillation mode close to the stable-antivortex core nucleation site as seen in micromagnetic simulations. This fundamental study of antivortex core response to spin currents is crucial for the assessment of their potential applications in high frequency spintronic devices such as reservoir computers.

cond-mat.mes-hall

Micromagnetic simulations for magnetic multipoles

Cluster magnetic multipoles are order parameters that characterize the symmetry of spin arrangements in magnetic materials. In particular, high-order multipoles play a pivotal role in altermagnets and non-collinear antiferromagnets where they govern electrical and optical phenomena. While spatially non-uniform multipole textures have been observed on the micrometer scale, their behavior at mesoscopic lengths remains largely unexplored. Here, we introduce a comprehensive micromagnetic framework for vector-like cluster magnetic multipoles, enabling quantitative, spatially resolved analysis of non-uniform multipole systems. As a demonstration, we apply the framework to magnetic-octupole domain-wall motion in the non-collinear antiferromagnet $\text{Mn}_3\text{Sn}$. Our simulations capture key features of domain-wall dynamics, including profile deformation and the emergence of an effective inertial mass. This work provides a unified approach for investigating the mesoscopic dynamics of high-order cluster multipoles, and opens new avenues for understanding and engineering the physical properties of functional magnetic materials, such as altermagnets and non-collinear antiferromagnets, for advanced spintronic technologies.

cond-mat.mes-hall

High dynamic-range quantum sensing of magnons and their dynamics using a superconducting qubit

Magnons can endow quantum devices with new functionalities. Assessing their potential requires precise characterization of magnon properties. Here, we use a superconducting qubit to probe magnons in a ferrimagnet over a range of about 2000 excitations. Using qubit control and parametrically induced qubit-magnon interactions we demonstrate few-excitation sensitive detection of magnons and are able to accurately resolve their decay. These results introduce quantum circuits as high-dynamic range probes for magnons and provide an avenue toward sensitive detection of nontrivial magnon dynamics.

quant-ph

Spin-polarized antiferromagnetic metals

Spin-polarized antiferromagnets have recently gained significant interest because they combine the advantages of both ferromagnets (spin polarization) and antiferromagnets (absence of net magnetization) for spintronics applications. In particular, spin-polarized antiferromagnetic metals can be useful as active spintronics materials because of their high electrical and thermal conductivities and their ability to host strong interactions between charge transport and magnetic spin textures. We review spin and charge transport phenomena in spin-polarized antiferromagnetic metals, in which the interplay of metallic conductivity and spin-split bands offers novel practical applications and new fundamental insights into antiferromagnetism. We focus on three types of antiferromagnets: canted antiferromagnets, noncollinear antiferromagnets, and collinear altermagnets. We also discuss how the investigation of spin-polarized antiferromagnetic metals can open doors to future research directions.

cond-mat.mtrl-sci

Unconventional Spin-Orbit Torques from Sputtered MoTe2 Films

Materials with strong spin-orbit coupling and low crystalline symmetry are promising for generating large unconventional spin-orbit torques (SOTs), such as in-plane field-like (FL) torques and out-of-plane damping-like (DL) torques, which can effectively manipulate and deterministically switch an out-of-plane magnetization without the need for additional external in-plane magnetic fields. Here, we report SOTs generated by magnetron-sputtered 1T' MoTe2/Permalloy (Py; Ni80Fe20)/MgO heterostructures using both spin-torque ferromagnetic resonance (ST-FMR) and second harmonic Hall measurements. We observed unconventional FL and DL torques in our samples due to spins polarized normal to the interface of MoTe2 and Py layers, and studied the influence of crystallographic order and MoTe2 layer thickness on the SOTs. By comparing the Raman spectra of 1T' MoTe2 samples prepared in different ways, we found a tensile strain in sputtered MoTe2 films, which might further enhance the generation of unconventional torques by reducing the symmetry of 1T' MoTe2.

cond-mat.mtrl-sci

Unconventional Field-Like Spin-Torques in CrPt$_3$

The topological semimetal CrPt$_3$ has potential for generating unconventional spin torques due to its ferrimagnetic ordering, topological band structure, and high anomalous Hall effect. CrPt$_3$ exhibits ferrimagnetic behavior only in its chemically ordered phase and is paramagnetic in its chemically disordered phase. By controlling the growth and annealing temperatures, epitaxial films of both chemically ordered and disordered phases of CrPt$_3$ are prepared allowing us to investigate the role of magnetic ordering on unconventional torque generation. We use angle dependent spin-torque ferromagnetic resonance and second harmonic Hall measurements to probe the spin torques generated from epitaxial CrPt$_3$ in CrPt$_3$/Cu/Ni$_{81}$Fe$_{19}$ heterostructures. With current applied along specific directions with respect to the crystal order we reveal unconventional spin torques in both ordered and disordered films. When current flows parallel to the $[1\overline{1}1]$ and $[\overline{1}11]$ directions we observe an unconventional field-like torque that is opposite in sign for the two directions. Our calculations reveal that this unconventional torque originates from an indirect nonlocal spin-orbit torque due to spin scattering at the CrPt$_3$/Cu interface, in addition to symmetry breaking at this interface.

cond-mat.mtrl-sci

Thermal contribution to current-driven antiferromagnetic-order switching

In information technology devices, current-driven state switching is crucial in various disciplines including spintronics, where the contribution of heating to the switching mechanism plays an inevitable role. Recently, current-driven antiferromagnetic order switching has attracted considerable attention due to its implications for next-generation spintronic devices. Although the switching mechanisms can be explained by spin dynamics induced by spin torques, some reports have claimed that demagnetization above the Neel temperature due to Joule heating is critical for switching. Here we present a systematic method and an analytical model to quantify the thermal contribution due to Joule heating in micro-electronic devices, focusing on current-driven octupole switching in the non-collinear antiferromagnet, Mn3Sn. The results consistently show that the critical temperature for switching remains relatively constant above the Neel temperature, while the threshold current density depends on the choice of substrate and the base temperature. In addition, we provide an analytical model to calculate the Joule-heating temperature which quantitatively explains our experimental results. From numerical calculations, we illustrate the reconfiguration of magnetic orders during cooling from a demagnetized state of polycrystalline Mn3Sn. This work not only provides deeper insights into magnetization switching in antiferromagnets, but also a general guideline for evaluating the Joule-heating temperature excursions in micro-electronic devices.

cond-mat.mtrl-sci

Strong Damping-Like Torques in Wafer-Scale MoTe${}_2$ Grown by MOCVD

The scalable synthesis of strong spin orbit coupling (SOC) materials such as 1T${}^\prime$ phase MoTe${}_2$ is crucial for spintronics development. Here, we demonstrate wafer-scale growth of 1T${}^\prime$ MoTe${}_2$ using metal-organic chemical vapor deposition (MOCVD) with sputtered Mo and (C${}_4$H${}_9$)${}_2$Te. The synthesized films show uniform coverage across the entire sample surface. By adjusting the growth parameters, a synthesis process capable of producing 1T${}^\prime$ and 2H MoTe${}_2$ mixed phase films was achieved. Notably, the developed process is compatible with back-end-of-line (BEOL) applications. The strong spin-orbit coupling of the grown 1T${}^\prime$ MoTe${}_2$ films was demonstrated through spin torque ferromagnetic resonance (ST-FMR) measurements conducted on a 1T${}^\prime$ MoTe${}_2$/permalloy bilayer RF waveguide. These measurements revealed a significant damping-like torque in the wafer-scale 1T${}^\prime$ MoTe${}_2$ film and indicated high spin-charge conversion efficiency. The BEOL compatible process and potent spin orbit torque demonstrate promise in advanced device applications.

cond-mat.mtrl-sci

Unraveling the origin of antiferromagnetic coupling at YIG/permalloy interface

We investigate the structural and electronic origin of antiferromagnetic (AFM) coupling in the Yttrium iron garnet (YIG) and permalloy (Py) bilayer system at the atomic level. Ferromagnetic Resonance (FMR) reveal unique hybrid modes in samples prepared with surface ion milling, indicative of antiferromagnetic exchange coupling at the YIG/Py interface. Using atomic resolution scanning transmission electron microscopy (STEM), we found that AFM coupling appears at the YIG/Py interface of the tetrahedral YIG surface formed with ion milling. The STEM measurements suggest that the interfacial AFM coupling is predominantly driven by an oxygen-mediated super-exchange coupling mechanism, which is confirmed by the density functional theory (DFT) calculations to be energetically favorable. Thus, the combined experimental and theoretical results reveal the critical role of interfacial atomic structure in determining the type magnetic coupling in a YIG/ferromagnet heterostructure, and prove that the interfacial structure can be experimentally tuned by surface ion-milling.

cond-mat.mtrl-sci

Magnon mediated spin pumping by coupled ferrimagnetic garnets heterostructure

Spin pumping has significant implications for spintronics, providing a mechanism to manipulate and transport spins for information processing. Understanding and harnessing spin currents through spin pumping is critical for the development of efficient spintronic devices. The use of a magnetic insulator with low damping, enhances the signal-to-noise ratio in crucial experiments such as spin-torque ferromagnetic resonance (FMR) and spin pumping. A magnetic insulator coupled with a heavy metal or quantum material offers a more straight forward model system, especially when investigating spin-charge interconversion processes to greater accuracy. This simplicity arises from the absence of unwanted effects caused by conduction electrons unlike in ferromagnetic metals. Here, we investigate the spin pumping in coupled ferrimagnetic (FiM) Y3Fe5O12 (YIG)/Tm3Fe5O12 (TmIG) bilayers combined with heavy-metal (Pt) using the inverse spin Hall effect (ISHE). It is observed that magnon transmission occurs at both of the FiMs FMR positions. The enhancement of spin pumping voltage (Vsp) in the FiM garnet heterostructures is attributed to the strong interfacial exchange coupling between FiMs. The modulation of Vsp is achieved by tuning the bilayer structure. Further, the spin mixing conductance for these coupled systems is found to be 10^18 m^-2. Our findings describe a novel coupled FiM system for the investigation of magnon coupling providing new prospects for magnonic devices.

cond-mat.mtrl-sci

Epitaxial growth and magnetic properties of kagome metal FeSn/elemental ferromagnet heterostructures

Binary kagome compounds TmXn (T = Mn, Fe, Co; X = Sn, Ge; m:n = 3:1, 3:2, 1:1) have garnered recent interest owing to the presence of both topological band crossings and flat bands arising from the geometry of the metal-site kagome lattice. To exploit these electronic features for potential applications in spintronics, the growth of high quality heterostructures is required. Here we report the synthesis of Fe/FeSn and Co/FeSn bilayers on Al2O3 substrates using molecular beam epitaxy to realize heterointerfaces between elemental ferromagnetic metals and antiferromagnetic kagome metals. Structural characterization using high-resolution X-ray diffraction, reflection high-energy electron diffraction, and electron microscopy reveals the FeSn films are flat and epitaxial. Rutherford backscattering spectroscopy was used to confirm the stoichiometric window where the FeSn phase is stabilized, while transport and magnetometry measurements were conducted to verify metallicity and magnetic ordering in the films. Exchange bias was observed, confirming the presence of antiferromagnetic order in the FeSn layers, paving the way for future studies of magnetism in kagome heterostructures and potential integration of these materials into devices.

cond-mat.mtrl-sci

Influence of temperature, doping, and amorphization on the electronic structure and magnetic damping of iron

Hybrid magnonic quantum systems have drawn increased attention in recent years for coherent quantum information processing, but too large magnetic damping is a persistent concern when metallic magnets are used. Their intrinsic damping is largely determined by electron-magnon scattering induced by spin-orbit interactions. In the low scattering limit, damping is dominated by intra-band electronic transitions, which has been theoretically shown to be proportional to the electronic density of states at the Fermi level. In this work, we focus on body-centered-cubic iron as a paradigmatic ferromagnetic material. We comprehensively study its electronic structure using first-principles density functional theory simulations and account for finite lattice temperature, boron (B) doping, and structure amorphization. Our results indicate that temperature induced atomic disorder and amorphous atomic geometries only have a minor influence. Instead, boron doping noticeably decreases the density of states near the Fermi level with an optimal doping level of 6.25%. In addition, we show that this reduction varies significantly for different atomic geometries and report that the highest reduction correlates with a large magnetization of the material. This may suggest materials growth under external magnetic fields as a route to explore in experiment.

cond-mat.mtrl-sci