arXiv subjects

Avishka Herath

Publications and source records attributed to Avishka Herath.

4 recordsLinked to original sources

arXiv2026

A Dry-Contact Ear-EEG System With Continuous Electrode-Skin Impedance Mismatch Monitoring for Motion Artifact Cancellation Using DRL Stimulus

Dry-contact ear-electroencephalography (Ear-EEG) enables wearable neural monitoring. However, motion induced electrode-skin impedance (ESI) mismatches between electrodes can severely degrade signal quality. To the best of our knowledge, this paper presents the first proof-of-concept dry-contact EarEEG system that uses a driven-right-leg (DRL) stimulus for continuous ESI mismatch monitoring, enabling online adaptive motion artifact cancellation. A 1 kHz sinusoidal stimulus is injected through the DRL electrode. The resulting response to the injected carrier is separated from the EEG using bandpass filtering and demodulation, and then used to extract the ESI mismatch information as the reference input for a normalized least-mean-square adaptive filter followed by a Hampel filtering stage. To evaluate artifact suppression and preservation of neural activity, alpha-band EEG activity was analyzed involving four healthy participants performing head nodding, electrode tapping, and jaw clenching. The system achieved artifact power reductions of 6.5, 12.6, and 9.0 dB (77.6%, 92.8%, and 86.4%, respectively) while alpha-band modulation remained clearly observable after processing. This demonstrates the feasibility of DRL-stimulusbased ESI mismatch monitoring for motion artifact cancellation in wearable dry-contact Ear-EEG.

eess.SP↗

arXiv2026

A Simultaneous ECG-PCG Acquisition System with Real-Time Burst-Adaptive Noise Cancellation

Cardiac auscultation is an essential clinical skill, requiring excellent hearing to distinguish subtle differences in timing and pitch of heart sounds. However, diagnosing solely from these sounds is often challenging due to interference from surrounding noise, and the information may be limited. Most of the existing solutions that adaptively cancel external noise are either non-real-time or computationally intensive, making them unsuitable for implementation in a portable system. This work proposes an end-to-end system with a real-time adaptive noise cancellation pipeline integrated into a device that simultaneously acquires electrocardiogram (ECG) and phonocardiogram (PCG) signals. We employ a burst-adaptive normalized least mean square algorithm that adjusts its adaptation in response to high-energy, non-stationary hospital noise. The algorithm's performance was initially assessed using datasets with artificially induced noise. Subsequently, the complete end-to-end system was validated using real-world hospital recordings captured with the dual-modality device. For ECG and PCG signals recorded from the device in noisy hospital settings, the proposed system achieved signal-to-noise ratio improvements of 30.32 dB and 37.01 dB, respectively. Furthermore, complexity analysis confirms the pipeline's suitability for embedded implementation. These results demonstrate the system's effectiveness in enabling reliable and accessible cardiac screening in noisy hospital environments typical of resource-constrained settings.

eess.SY↗

arXiv2026

A 2.4 GHz LC-VCO Fractional-N Phase Locked Loop Open-Source Design in 130-nm BiCMOS

Radio frequency (RF) integrated circuit design using the open-source complementary Metal-Oxide semiconductor (CMOS) ecosystem, such as for phase-locked loops (PLLs), is limited by the absence of reliable passive device models, particularly on-chip spiral inductors. Consequently, prior work relies on ring-oscillator-based voltage-controlled oscillators (VCOs) with degraded phase noise performance. This work presents a 2.4 GHz type-II fractional-N PLL implemented in the IHP SG13G2 130 nm BiCMOS open-source technology. The proposed design employs a cross-coupled differential LC-VCO integrated with a custom-designed spiral inductor, developed using an open-source electromagnetic modelling workflow in OpenEMS. The optimized inductor achieves 4 nH inductance with a quality factor of 16.8 at 2.45 GHz. The LC-VCO sensitivity is approximately 120 MHz/V, while the PLL phase noise is -100.8 dBc/Hz at 1 MHz offset. The complete PLL is realized using a fully open-source electronic design automation (EDA) flow, occupying a total area of 930 um x 666 um (~0.619 mm2) and consuming 12.73 mW, demonstrating the feasibility of RF integrated circuit design in an open-source CMOS IC design ecosystem.

eess.SP↗

arXiv2026

Area Optimization of Open-Source Low-Power INA in 130nm CMOS using Hybrid Mixed-Variable PSO

As open-source silicon initiatives democratize access to integrated circuit development using multi-project environments, silicon area has become a premium resource. However, minimizing this layout area traditionally forces designers to compromise on core performance specifications. To address this challenge, this paper presents an open-source framework based on a hybrid mixed-variable particle swarm optimization algorithm and the gm/ID methodology to minimize the layout area of complex analog circuits while meeting design requirements. The framework's efficacy is demonstrated by designing a low-power instrumentation amplifier that achieves a 90.33% reduction in gate area over existing implementations.

eess.SY↗