arXiv subjects

Avi Deb Raha

Publications and source records attributed to Avi Deb Raha.

17 recordsLinked to original sources

arXiv2026

Energy-Aware Compression-Computation Co-Adaptation for Latency Minimization in Multi-User Semantic Communication

Deep joint source-channel coding-enabled (DeepJSCC) semantic communication (SemCom) has excelled at delivering high perceptual quality at low channel-bandwidth ratios, which positions it as a pillar for next-generation wireless networks. However, the existing works have difficulty accommodating user heterogeneity in terms of communication channel quality, expected quality-of-service (QoS) targets, and the available local energy. Therefore, in this paper, we explicitly reflect the heterogeneity of user devices in terms of the differences in expected QoS, channel condition, and local energy, and then mathematically formulate the problem. Next, we propose an energy-aware compression-computation co-adaptation (CoCo) framework, in which the base station can meet the expected user QoS by transmitting a longer signal or offloading the task to a local device. The user has to dedicate energy to denoising the signal to recover higher-fidelity latent features before feeding it to the semantic decoder. To solve the formulated problem, we first decompose it into two sub-problems: parameter optimization and resource allocation problems. Specifically, we propose a robust codec that effectively works under a diversity of compression rates and channel noise without re-training, while the greedy sub-carrier allocation lowers the communication time. Finally, we present simulation results on standard image datasets over additive white Gaussian noise to demonstrate the effectiveness of CoCo, which reduces total latency relative to rate-only adaptive DeepJSCC or denoising-only, thereby ensuring the demands of each individual user are met.

cs.IT↗

arXiv2026

A Comprehensive Survey on Semantic Communication in Non-Terrestrial Networks: Architectures, Methodologies, and Challenges

Sixth-generation networks are expected to extend connectivity beyond terrestrial infrastructure through non-terrestrial networks (NTNs) comprising satellites, high-altitude platform stations, and unmanned aerial vehicles. However, these platforms operate in a regime that bit-fidelity-centric design handles poorly: high free-space path loss, massive round-trip delays, Doppler shifts of hundreds of kilohertz, limited visibility windows, and limited on-board computing capability compared with ground hardware. Semantic communication (SemCom), which transmits task-relevant meaning rather than exact bits, provides a promising way to address these constraints. This survey examines SemCom for NTNs from the perspective of how semantic mechanisms support different parts of the communication system. We first map five structural NTN constraints onto the semantic mechanisms that can address them, and we show that each platform imposes a distinct constraint vector that selects among those mechanisms. We then propose a five-plane taxonomy covering semantic representation and on-board encoding, channel-adaptive transmission, semantic networking, resource management, and distributed learning with knowledge-base maintenance, together with a cross-cutting trust plane, and we review the literature within it. Finally, we summarize current standardization efforts and available research resources, and identify open problems and future research directions for SemCom in NTNs.

cs.IT↗

arXiv2026

Anchor-Aided Multi-User Semantic Communication with Adaptive Decoders

Semantic communication (SemCom) is accelerating its momentum to catch up with the massive increase in users' demands in both quantity and quality, with the assistance of advanced deep learning (DL) techniques. Specifically, SemCom can actively embed the semantic meaning of the data into the transmission process, while eliminating statistical redundancy to preserve bandwidth resources for other users. Therefore, the transmitter encodes the message in the most concise way, while the receiver tries to interpret the message with the DL model and its knowledge of the transmitter's intended meaning. Most existing works only consider one transmitter and one receiver, which limits their ability to address the diversity in users' models and capabilities. Therefore, in this paper, we propose a multi-user semantic communication system where each user is equipped with a distinct DL-based joint source-channel decoder architecture, reflecting the diversity in computing capacity. The challenging issue with the proposed system is the catastrophic forgetting property of neural networks, where the DL-based encoder fails to encode the data for the previous user when being trained with a new user. To address this, we propose an anchor decoder with an architecture that is symmetric to the encoder. The symmetric decoder has the same computational capacity as the encoder, providing feedback that aligns with the encoder's extraction capabilities and enhances optimization efficiency. The parameters of the optimized encoder are then frozen and used to train decoders for various users, aligning them with the encoder outputs. Finally, we conduct a series of simulation experiments to validate the proposed framework against other benchmarks.

cs.IT↗

arXiv2026

Agentic AI as a Network Control-Plane Intelligence Layer for Federated Learning over 6G

The shift toward user-customized on-device learning places new demands on wireless systems: models must be trained on diverse, distributed data while meeting strict latency, bandwidth, and reliability constraints. To address this, we propose an Agentic AI as the control layer for managing federated learning (FL) over 6G networks, which translates high-level task goals into actions that are aware of network conditions. Rather than simply viewing FL as a learning challenge, our system sees it as a combined task of learning and network management. A set of specialized agents focused on retrieval, planning, coding, and evaluation utilizes monitoring tools and optimization methods to handle client selection, incentive structuring, scheduling, resource allocation, adaptive local training, and code generation. The use of closed-loop evaluation and memory allows the system to consistently refine its decisions, taking into account varying signal-to-noise ratios, bandwidth conditions, and device capabilities. Finally, our case study has demonstrated the effectiveness of the Agentic AI system's use of tools for achieving high performance.

cs.CV↗

arXiv2025

Cross-Domain Federated Semantic Communication with Global Representation Alignment and Domain-Aware Aggregation

Semantic communication can significantly improve bandwidth utilization in wireless systems by exploiting the meaning behind raw data. However, the advancements achieved through semantic communication are closely dependent on the development of deep learning (DL) models for joint source-channel coding (JSCC) encoder/decoder techniques, which require a large amount of data for training. To address this data-intensive nature of DL models, federated learning (FL) has been proposed to train a model in a distributed manner, where the server broadcasts the DL model to clients in the network for training with their local data. However, the conventional FL approaches suffer from catastrophic degradation when client data are from different domains. In contrast, in this paper, a novel FL framework is proposed to address this domain shift by constructing the global representation, which aligns with the local features of the clients to preserve the semantics of different data domains. In addition, the dominance problem of client domains with a large number of samples is identified and, then, addressed with a domain-aware aggregation approach. This work is the first to consider the domain shift in training the semantic communication system for the image reconstruction task. Finally, simulation results demonstrate that the proposed approach outperforms the model-contrastive FL (MOON) framework by 0.5 for PSNR values under three domains at an SNR of 1 dB, and this gap continues to widen as the channel quality improves.

cs.IT↗

arXiv2025

DD-JSCC: Dynamic Deep Joint Source-Channel Coding for Semantic Communications

Deep Joint Source-Channel Coding (Deep-JSCC) has emerged as a promising semantic communication approach for wireless image transmission by jointly optimizing source and channel coding using deep learning techniques. However, traditional Deep-JSCC architectures employ fixed encoder-decoder structures, limiting their adaptability to varying device capabilities, real-time performance optimization, power constraints and channel conditions. To address these limitations, we propose DD-JSCC: Dynamic Deep Joint Source-Channel Coding for Semantic Communications, a novel encoder-decoder architecture designed for semantic communication systems. Unlike traditional Deep-JSCC models, DD-JSCC is flexible for dynamically adjusting its layer structures in real-time based on transmitter and receiver capabilities, power constraints, compression ratios, and current channel conditions. This adaptability is achieved through a hierarchical layer activation mechanism combined with implicit regularization via sequential randomized training, effectively reducing combinatorial complexity, preventing overfitting, and ensuring consistent feature representations across varying configurations. Simulation results demonstrate that DD-JSCC enhances the performance of image reconstruction in semantic communications, achieving up to 2 dB improvement in Peak Signal-to-Noise Ratio (PSNR) over fixed Deep-JSCC architectures, while reducing training costs by over 40%. The proposed unified framework eliminates the need for multiple specialized models, significantly reducing training complexity and deployment overhead.

cs.NI↗

arXiv2025

A Survey on Foundation Models for Personalized Federated Intelligence

The rise of large language models (LLMs), such as ChatGPT, Gemini, and Grok, has reshaped the AI landscape. As prominent instances of foundational models (FMs), they exhibit remarkable capabilities in generating human-like content, pushing the boundaries towards artificial general intelligence (AGI). However, their large-scale nature, privacy sensitivity, and substantial computational demands pose significant challenges for personalized customization for end users. To bridge this gap, we present the vision of artificial personalized intelligence (API), which focuses on adapting FMs to individual users while ensuring privacy. As a central enabler of API, we propose personalized federated intelligence (PFI), a new paradigm that not only integrates the privacy benefits of federated learning (FL) with the generalization capabilities of FMs but also places personalization at its core. To this end, we first survey recent advances in FL and FMs that lay the foundation for PFI. We then explore core stages of the PFI pipeline: efficient personalization at the edge, trustworthy adaptation, and adaptive refinement via retrieval-augmented generation. Finally, we highlight future directions for enabling PFI. Overall, this survey aims to lay a foundation for the development of API as a complementary direction to AGI, with PFI as a key enabling paradigm.

cs.AI↗

arXiv2025

FedFeat+: A Robust Federated Learning Framework Through Federated Aggregation and Differentially Private Feature-Based Classifier Retraining

In this paper, we propose the FedFeat+ framework, which distinctively separates feature extraction from classification. We develop a two-tiered model training process: following local training, clients transmit their weights and some features extracted from the feature extractor from the final local epochs to the server. The server aggregates these models using the FedAvg method and subsequently retrains the global classifier utilizing the shared features. The classifier retraining process enhances the model's understanding of the holistic view of the data distribution, ensuring better generalization across diverse datasets. This improved generalization enables the classifier to adaptively influence the feature extractor during subsequent local training epochs. We establish a balance between enhancing model accuracy and safeguarding individual privacy through the implementation of differential privacy mechanisms. By incorporating noise into the feature vectors shared with the server, we ensure that sensitive data remains confidential. We present a comprehensive convergence analysis, along with theoretical reasoning regarding performance enhancement and privacy preservation. We validate our approach through empirical evaluations conducted on benchmark datasets, including CIFAR-10, CIFAR-100, MNIST, and FMNIST, achieving high accuracy while adhering to stringent privacy guarantees. The experimental results demonstrate that the FedFeat+ framework, despite using only a lightweight two-layer CNN classifier, outperforms the FedAvg method in both IID and non-IID scenarios, achieving accuracy improvements ranging from 3.92 % to 12.34 % across CIFAR-10, CIFAR-100, and Fashion-MNIST datasets.

cs.CV↗

arXiv2025

Security Risks in Vision-Based Beam Prediction: From Spatial Proxy Attacks to Feature Refinement

The rapid evolution towards the sixth-generation (6G) networks demands advanced beamforming techniques to address challenges in dynamic, high-mobility scenarios, such as vehicular communications. Vision-based beam prediction utilizing RGB camera images emerges as a promising solution for accurate and responsive beam selection. However, reliance on visual data introduces unique vulnerabilities, particularly susceptibility to adversarial attacks, thus potentially compromising beam accuracy and overall network reliability. In this paper, we conduct the first systematic exploration of adversarial threats specifically targeting vision-based mmWave beam selection systems. Traditional white-box attacks are impractical in this context because ground-truth beam indices are inaccessible and spatial dynamics are complex. To address this, we propose a novel black-box adversarial attack strategy, termed Spatial Proxy Attack (SPA), which leverages spatial correlations between user positions and beam indices to craft effective perturbations without requiring access to model parameters or labels. To counteract these adversarial vulnerabilities, we formulate an optimization framework aimed at simultaneously enhancing beam selection accuracy under clean conditions and robustness against adversarial perturbations. We introduce a hybrid deep learning architecture integrated with a dedicated Feature Refinement Module (FRM), designed to systematically filter irrelevant, noisy and adversarially perturbed visual features. Evaluations using standard backbone models such as ResNet-50 and MobileNetV2 demonstrate that our proposed method significantly improves performance, achieving up to an +21.07\% gain in Top-K accuracy under clean conditions and a 41.31\% increase in Top-1 adversarial robustness compared to different baseline models.

cs.NI↗

arXiv2025

A Deep Incremental Framework for Multi-Service Multi-Modal Devices in NextG AI-RAN Systems

In this paper, we propose a deep incremental framework for efficient RAN management, introducing the Multi-Service-Modal UE (MSMU) system, which enables a single UE to handle eMBB and uRLLC services simultaneously. We formulate an optimization problem integrating traffic demand prediction, route optimization, RAN slicing, service identification, and radio resource management under uncertainty. We decompose it into long-term (L-SP) and short-term (S-SP) subproblems then propose a Transformer model for L-SP optimization, predicting eMBB and uRLLC traffic demands and optimizing routes for RAN slicing. To address non-stationary network traffic with evolving trends and scale variations, we integrate reversible instance normalization (ReVIN) into the forecasting pipeline. For the S-SP, we propose an LSTM model enabling real-time service type identification and resource management, utilizing L-SP predictions. We incorporate continual learning into the S-SP framework to adapt to new service types while preserving prior knowledge. Experimental results demonstrate that our proposed framework achieves up to 46.86% reduction in traffic demand prediction error, 26.70% and 18.79% improvement in PRBs and power estimation, 7.23% higher route selection accuracy, and 7.29% improvement in service identification over the baselines with 95% average accuracy in continual service identification across seven sequential tasks.

cs.NI↗

arXiv2025

A Contemporary Survey on Semantic Communications:Theory of Mind, Generative AI, and Deep Joint Source-Channel Coding

Semantic communication is emerging as the next pillar in wireless communication technology due to its transformative capabilities in reducing communication overhead, enhancing robustness, and enabling intelligent information exchange. The most significant obstacle lies in the lack of standardization across various research directions, leading to inconsistencies in interpretation, objectives, and evaluation. In this survey, we provide an in-depth overview of three leading directions in semantic communication, namely Theory of Mind-based semantic communication, Generative AI-driven semantic communication, and Deep Joint Source-Channel Coding (DJSCC)-based semantic communication. These directions have been extensively studied and developed by research institutes worldwide, and their effectiveness continues to improve alongside advances in communication and computing technologies. The ToM-based semantic communication enables communication agents to interact intelligently, infer each other's intentions, and gradually form a shared understanding. The GAI-based semantic communication leverages generative models to create and interpret content beyond traditional compression, allowing flexible semantic encoding and decoding tailored to specific tasks. The DJSCC-based semantic communication direction integrates DL models to jointly optimize the source and channel coding processes for efficient semantic information transfer. Next, we present a detailed survey of existing works under each direction and open research problems in semantic communication. Furthermore, we identify and analyze critical challenges, such as scalability and adaptability, that currently hinder the deployment of semantic communication systems. Finally, we discuss potential research opportunities and future directions such as quantum computing to further enhance the capabilities of semantic communication.

cs.IT↗

arXiv2024

Boosting Federated Domain Generalization: Understanding the Role of Advanced Pre-Trained Architectures

In this study, we explore the efficacy of advanced pre-trained architectures, such as Vision Transformers (ViT), ConvNeXt, and Swin Transformers in enhancing Federated Domain Generalization. These architectures capture global contextual features and model long-range dependencies, making them promising candidates for improving cross-domain generalization. We conduct a broad study with in-depth analysis and systematically evaluate different variants of these architectures, using extensive pre-training datasets such as ImageNet-1K, ImageNet-21K, JFT-300M, and ImageNet-22K. Additionally, we compare self-supervised and supervised pre-training strategies to assess their impact on FDG performance. Our findings suggest that self-supervised techniques, which focus on reconstructing masked image patches, can better capture the intrinsic structure of images, thereby outperforming their supervised counterparts. Comprehensive evaluations on the Office-Home and PACS datasets demonstrate that adopting advanced architectures pre-trained on larger datasets establishes new benchmarks, achieving average accuracies of 84.46\% and 92.55\%, respectively. Additionally, we observe that certain variants of these advanced models, despite having fewer parameters, outperform larger ResNet models. This highlights the critical role of utilizing sophisticated architectures and diverse pre-training strategies to enhance FDG performance, especially in scenarios with limited computational resources where model efficiency is crucial. Our results indicate that federated learning systems can become more adaptable and efficient by leveraging these advanced methods, offering valuable insights for future research in FDG.

cs.CV↗

arXiv2024

Advancing Ultra-Reliable 6G: Transformer and Semantic Localization Empowered Robust Beamforming in Millimeter-Wave Communications

Advancements in 6G wireless technology have elevated the importance of beamforming, especially for attaining ultra-high data rates via millimeter-wave (mmWave) frequency deployment. Although promising, mmWave bands require substantial beam training to achieve precise beamforming. While initial deep learning models that use RGB camera images demonstrated promise in reducing beam training overhead, their performance suffers due to sensitivity to lighting and environmental variations. Due to this sensitivity, Quality of Service (QoS) fluctuates, eventually affecting the stability and dependability of networks in dynamic environments. This emphasizes a critical need for robust solutions. This paper proposes a robust beamforming technique to ensure consistent QoS under varying environmental conditions. An optimization problem has been formulated to maximize users' data rates. To solve the formulated NP-hard optimization problem, we decompose it into two subproblems: the semantic localization problem and the optimal beam selection problem. To solve the semantic localization problem, we propose a novel method that leverages the K-means clustering and YOLOv8 model. To solve the beam selection problem, we propose a novel lightweight hybrid architecture that combines a lightweight transformer with a CNN architecture through a weighted entropy mechanism. This hybrid architecture utilizes multimodal data sources to dynamically predict the optimal beams. A novel metric, Accuracy-Complexity Efficiency (ACE), has been proposed to quantify this. Six testing scenarios have been developed to evaluate the robustness of the proposed model. Finally, the simulation result demonstrates that the proposed model outperforms several state-of-the-art baselines regarding beam prediction accuracy, received power, and ACE in the developed test scenarios.

cs.NI↗

arXiv2024

CCC++: Optimized Color Classified Colorization with Segment Anything Model (SAM) Empowered Object Selective Color Harmonization

In this paper, we formulate the colorization problem into a multinomial classification problem and then apply a weighted function to classes. We propose a set of formulas to transform color values into color classes and vice versa. To optimize the classes, we experiment with different bin sizes for color class transformation. Observing class appearance, standard deviation, and model parameters on various extremely large-scale real-time images in practice we propose 532 color classes for our classification task. During training, we propose a class-weighted function based on true class appearance in each batch to ensure proper saturation of individual objects. We adjust the weights of the major classes, which are more frequently observed, by lowering them, while escalating the weights of the minor classes, which are less commonly observed. In our class re-weight formula, we propose a hyper-parameter for finding the optimal trade-off between the major and minor appeared classes. As we apply regularization to enhance the stability of the minor class, occasional minor noise may appear at the object's edges. We propose a novel object-selective color harmonization method empowered by the Segment Anything Model (SAM) to refine and enhance these edges. We propose two new color image evaluation metrics, the Color Class Activation Ratio (CCAR), and the True Activation Ratio (TAR), to quantify the richness of color components. We compare our proposed model with state-of-the-art models using six different dataset: Place, ADE, Celeba, COCO, Oxford 102 Flower, and ImageNet, in qualitative and quantitative approaches. The experimental results show that our proposed model outstrips other models in visualization, CNR and in our proposed CCAR and TAR measurement criteria while maintaining satisfactory performance in regression (MSE, PSNR), similarity (SSIM, LPIPS, UIUI), and generative criteria (FID).

cs.CV↗

arXiv2024

CCC: Color Classified Colorization

Automatic colorization of gray images with objects of different colors and sizes is challenging due to inter- and intra-object color variation and the small area of the main objects due to extensive backgrounds. The learning process often favors dominant features, resulting in a biased model. In this paper, we formulate the colorization problem into a multinomial classification problem and then apply a weighted function to classes. We propose a set of formulas to transform color values into color classes and vice versa. Class optimization and balancing feature distribution are the keys for good performance. Observing class appearance on various extremely large-scale real-time images in practice, we propose 215 color classes for our colorization task. During training, we propose a class-weighted function based on true class appearance in each batch to ensure proper color saturation of individual objects. We establish a trade-off between major and minor classes to provide orthodox class prediction by eliminating major classes' dominance over minor classes. As we apply regularization to enhance the stability of the minor class, occasional minor noise may appear at the object's edges. We propose a novel object-selective color harmonization method empowered by the SAM to refine and enhance these edges. We propose a new color image evaluation metric, the Chromatic Number Ratio (CNR), to quantify the richness of color components. We compare our proposed model with state-of-the-art models using five different datasets: ADE, Celeba, COCO, Oxford 102 Flower, and ImageNet, in both qualitative and quantitative approaches. The experimental results show that our proposed model outstrips other models in visualization and CNR measurement criteria while maintaining satisfactory performance in regression (MSE, PSNR), similarity (SSIM, LPIPS, UIQI), and generative criteria (FID).

cs.CV↗

arXiv2023

Generative AI-driven Semantic Communication Framework for NextG Wireless Network

This work designs a novel semantic communication (SemCom) framework for the next-generation wireless network to tackle the challenges of unnecessary transmission of vast amounts that cause high bandwidth consumption, more latency, and experience with bad quality of services (QoS). In particular, these challenges hinder applications like intelligent transportation systems (ITS), metaverse, mixed reality, and the Internet of Everything, where real-time and efficient data transmission is paramount. Therefore, to reduce communication overhead and maintain the QoS of emerging applications such as metaverse, ITS, and digital twin creation, this work proposes a novel semantic communication framework. First, an intelligent semantic transmitter is designed to capture the meaningful information (e.g., the rode-side image in ITS) by designing a domain-specific Mobile Segment Anything Model (MSAM)-based mechanism to reduce the potential communication traffic while QoS remains intact. Second, the concept of generative AI is introduced for building the SemCom to reconstruct and denoise the received semantic data frame at the receiver end. In particular, the Generative Adversarial Network (GAN) mechanism is designed to maintain a superior quality reconstruction under different signal-to-noise (SNR) channel conditions. Finally, we have tested and evaluated the proposed semantic communication (SemCom) framework with the real-world 6G scenario of ITS; in particular, the base station equipped with an RGB camera and a mmWave phased array. Experimental results demonstrate the efficacy of the proposed SemCom framework by achieving high-quality reconstruction across various SNR channel conditions, resulting in 93.45% data reduction in communication.

cs.NI↗

arXiv2023

MP-FedCL: Multiprototype Federated Contrastive Learning for Edge Intelligence

Federated learning-assisted edge intelligence enables privacy protection in modern intelligent services. However, not independent and identically distributed (non-IID) distribution among edge clients can impair the local model performance. The existing single prototype-based strategy represents a class by using the mean of the feature space. However, feature spaces are usually not clustered, and a single prototype may not represent a class well. Motivated by this, this paper proposes a multi-prototype federated contrastive learning approach (MP-FedCL) which demonstrates the effectiveness of using a multi-prototype strategy over a single-prototype under non-IID settings, including both label and feature skewness. Specifically, a multi-prototype computation strategy based on \textit{k-means} is first proposed to capture different embedding representations for each class space, using multiple prototypes ($k$ centroids) to represent a class in the embedding space. In each global round, the computed multiple prototypes and their respective model parameters are sent to the edge server for aggregation into a global prototype pool, which is then sent back to all clients to guide their local training. Finally, local training for each client minimizes their own supervised learning tasks and learns from shared prototypes in the global prototype pool through supervised contrastive learning, which encourages them to learn knowledge related to their own class from others and reduces the absorption of unrelated knowledge in each global iteration. Experimental results on MNIST, Digit-5, Office-10, and DomainNet show that our method outperforms multiple baselines, with an average test accuracy improvement of about 4.6\% and 10.4\% under feature and label non-IID distributions, respectively.

cs.LG↗