arXiv subjects

Atanu Paul

Publications and source records attributed to Atanu Paul.

9 recordsLinked to original sources

arXiv2026

Bond Disproportionation, Ligand Holes, and Persistent Spin Textures in Ag$_2$BiO$_3$

The origin of the proposed bond disproportionated insulating state of the non-centrosymmetric ($Pnn2$) phase of Ag$_{2}$BiO$_{3}$ is explored using first principles electronic structure calculations. The novel insulating state is elucidated by first considering the initially proposed centosymmetric metallic ($Pnna$) phase of Ag$_{2}$BiO$_{3}$. Our calculations reveal that the valence skipping Bi$^{4+}$ ions in this phase are better described as Bi$^{3+}\underline{L}$ with completely filled Bi-(6$s$) states and a ligand hole. However, phonon calculations indicate that the metallic ($Pnna$) state is dynamically unstable. Structural stability is achieved through breathing distortions of the oxygen octahedra, resulting in two inequivalent Bi sites and a reduction of symmetry to the $Pnn2$ phase. Electronic structure calculations further reveal that the $Pnn2$ phase is a bond disproportionated insulator where the nominal charge state of Bi is described by : 2[Bi$^{3+}\underline{L}$ (Bi$^{4+}$)] $\rightarrow$ Bi$^{3+}\underline{L}^{2-\delta}$ (Bi1$^{5+}$) + Bi$^{3+}\underline{L}^{\delta}$ (Bi2$^{3+}$), highlighting the crucial role of ligand holes in driving the insulating state. Next we have investigated the electronic structure of Ag$_{2}$BiO$_{3}$ in the insulating ($Pnn2$) phase including spin-orbit coupling. Our density functional theory (DFT ) calculations complemented by ${\bf k.p}$ model Hamiltonian analysis reveal persistent spin-textures around the $X$ and $Y$ high symmetry points of the orthorhombic Brillouin zone imposed by non-symmorphic symmetry, positioning Ag$_{2}$BiO$_{3}$ as a promising candidate for spintronic applications.

cond-mat.mtrl-sci↗

arXiv2026

Uncovering Antipolar Ordering and Pressure-Tunable Phases in Hexagonal LaN

We predict an antipolar instability in hexagonal LaN using first-principles density functional theory. Starting from a nonpolar hexagonal phase, we identify competing polar and antipolar zone-center phonon instabilities. Condensation of the polar and antipolar modes stabilizes, respectively, dynamically stable wurtzite (WZ) phase and an hexagonal antipolar (AP) phase which is characterized by alternating local polarization and zero net macroscopic polarization within the unit cell. At ambient conditions, the AP phase is metastable with respect to the WZ phase, and a finite energy barrier exists between these phases, suggesting a possible polarization-switching pathway via the AP intermediate state. The energy barrier between the WZ and AP phases decreases with increasing pressure, indicating enhanced tunability between polar and antipolar states. The sublattice polarization increases with pressure in the AP phase, while it decreases in the WZ phase. We further find that, with increasing pressure, the rock-salt and tetragonal phases of LaN become more stable than the hexagonal phases (AP and WZ). Consequently, the realization of the AP phase is more favorable in the low-pressure regime, where hexagonal phases remain energetically competitive. These results demonstrate pressure-driven competition between polar and antipolar phases in LaN and point toward antiferroelectric-like behavior in this binary nitride system.

cond-mat.mtrl-sci↗

arXiv2025

An atomistic approach for modeling of polarizability and Raman scattering of water clusters and liquid water

In this work, we develop a framework for atomistic modeling of electronic polarizability to predict the Raman spectra of hydrogen-bonded clusters and liquids from molecular dynamics (MD) simulations. The total polarizability of the system is assumed to arise from contributions of both the monomer unit and intermolecular interactions. The generalized bond-polarizability model (GBPM), inspired by the classic bond-polarizability model, effectively describes the electronic polarizability of a monomer. To account for the electronic polarizability arising from intermolecular interactions, we use a basis set of rapidly decaying functions of interatomic distances. We apply this model to calculate the electronic polarizability and Raman spectra of water clusters ((H2O)r, r = 2, 3, 4, 5, 6) and liquid water. The computational results are compared with the results of quantum-mechanical calculations for clusters and to experimental data for the liquid. It is demonstrated that this simple and physically motivated model, which relies on a small number of parameters, performs well for clusters at both low and high temperatures, capturing strong anharmonic effects. Moreover, its high transferability suggests its applicability to other water clusters. These results suggest that a hierarchical approach based on the Jacob's ladder of increasingly sophisticated and accurate atomistic polarizability models incorporating additional effects can be used for efficient modeling of Raman spectra from MD simulations of clusters, liquids and solids.

physics.chem-ph↗

arXiv2025

Generalized Bond Polarizability model for more accurate atomistic modeling of Raman spectra

Raman spectroscopy is an important tool for studies of molecules, liquids and solids. While Raman spectra can be obtained theoretically from molecular dynamics (MD) simulations, this requires the calculation of the electronic polarizability along the simulation trajectory. First-principles calculations of electronic polarizability are computationally expensive, motivating the development of atomistic models for the evaluation of the changes in the electronic polarizability with the changes in the atomic coordinates of the system. The bond polarizability model (BPM) is one of the oldest and simplest such atomistic models, but cannot reproduce the effects of angular vibrations, leading to inaccurate modeling of Raman spectra. Here, we demonstrate that the generalization of BPM through inclusion of terms for atom pairs that are traditionally considered to be not involved in bonding dramatically improves the accuracy of polarizability modeling and Raman spectra calculations. The generalized BPM (GBPM) reproduces the ab initio polarizability and Raman spectra for a range of tested molecules (SO2, H2S, H2O, NH3, CH4, CH3OH and CH3CH2OH) with high accuracy and also shows significantly improved agreement with ab initio results for the more complex ferroelectric BaTiO3 systems. For liquid water, the anisotropic Raman spectrum derived from atomistic MD simulations using GBPM evaluation of polarizability shows significantly improved agreement with the experimental spectrum compared to the spectrum derived using BPM. Thus, GBPM can be used for the modeling of Raman spectra using large-scale molecular dynamics and provides a good basis for the further development of atomistic polarizability models.

cond-mat.mtrl-sci↗

arXiv2024

Accuracy and limitations of the bond polarizability model in modeling of Raman scattering from molecular dynamics simulations

Calculation of Raman scattering from molecular dynamics (MD) simulations requires accurate modeling of the evolution of the electronic polarizability of the system along its MD trajectory. For large systems, this necessitates the use of atomistic models to represent the dependence of electronic polarizability on atomic coordinates. The bond polarizability model (BPM) is the simplest such model and has been used for modeling the Raman spectra of molecular systems but has not been applied to solid-state systems. Here, we systematically investigate the accuracy and limitations of the BPM parameterized from density functional theory (DFT) results for a series of simple molecules such as CO2, SO2, H2S, H2O, NH3, and CH4, the more complex CH2O, CH3OH and CH3CH2OH and thiophene molecules and the BaTiO3 and CsPbBr3 perovskite solids. We find that BPM can reliably reproduce the overall features of the Raman spectra such as shifts of peak positions. However, with the exception of highly symmetric systems, the assumption of non-interacting bonds limits the quantitative accuracy of the BPM; this assumption also leads to qualitatively inaccurate polarizability evolution and Raman spectra for systems where large deviations from the ground state structure are present.

cond-mat.mtrl-sci↗

arXiv2023

Stereochemically Active Lone-pair Leads to Strong Birefringence in the Vacancy Ordered Cs3Sb2Cl9 Perovskite Single Crystals

Stereochemically active lone-pair (SCALP) cations are attractive units for realizing optical anisotropy. Antimony (III) chloride perovskites with SCALP have remained largely unknown till date. We synthesized vacancy ordered Cs3Sb2Cl9 perovskite single crystals with SbCl6 octahedral linkage containing SCALP. Remarkably, Cs3Sb2Cl9 single crystals exhibit an exceptional birefringence of 0.12 +(-) 0.01 at 550 nm, which is the largest among pristine all-inorganic halide perovskites. The SCALP brings a large local structural distortion of the SbCl6 octahedra promoting birefringence optical responses in Cs3Sb2Cl9 single crystals. Theoretical calculations reveal that the considerable hybridization of Sb 5s with Sb 5p and Cl 3p states largely contribute to the SCALP. Furthermore, the change in the Sb-Cl-Sb bond angle creates distortion in the SbCl6 octahedral arrangement in the apical and equatorial directions within the crystal structure incorporating the required anisotropy for the birefringence. This work explores pristine inorganic halide perovskite single crystals as a potential birefringent material with prospects in integrated optical devices.

cond-mat.mtrl-sci↗

arXiv2023

An atomistic model of electronic polarizability for calculation of Raman scattering from large-scale MD simulations

The application of molecular dynamics (MD) simulations to the interpretation of Raman scattering spectra is hindered by inability of atomistic simulations to account for the dynamic evolution of electronic polarizability, requiring the use of either ab initio method or parameterization of machine learning models. More broadly, the dynamic evolution of electronic-structure-derived properties cannot be treated by the current atomistic models. Here, we report a simple, physically-based atomistic model with few (maximum 10 parameters for the systems considered here) adjustable parameters that can accurately represent the changes in the electronic polarizability tensor for molecules and solid-state systems. Due to its compactness, the model can be applied for simulations of Raman spectra of large (~ 1,000,000-atom) systems with modest computational cost. To demonstrate its accuracy, the model is applied to the CO2 molecule, water clusters, and BaTiO3 and CsPbBr3 perovskites and shows good agreement with ab-initio-derived and experimental polarizability tensor and Raman data. The atomistic nature of the model enables local analysis of the contributions to Raman spectra, paving the way for the application of MD simulations for the interpretation of Raman spectroscopy results. Furthermore, our successful atomistic representation of the evolution of electronic polarizability suggests that the evolution of electronic structure and its derivative properties can be represented by atomistic models, opening up the possibility of studies of electronic-structure-dependent properties using large-scale atomistic simulations.

cond-mat.mtrl-sci↗

arXiv2018

Hybridization-switching induced Mott transition in ABO$_3$ perovskites

We propose the concept of "hybridization-switching induced Mott transition" which is relevant to a broad class of ABO$_3$ perovskite materials including BiNiO$_3$ and PbCrO$_3$ which feature extended $6s$ orbitals on the A-site cation (Bi or Pb), and A-O covalency induced ligand holes. Using {\it ab initio} electronic structure and slave rotor theory calculations, we show that such systems exhibit a breathing phonon driven A-site to oxygen hybridization-wave instability which conspires with strong correlations on the B-site transition metal ion (Ni or Cr) to induce a Mott insulator. These Mott insulators with active A-site orbitals are shown to undergo a pressure induced insulator to metal transition accompanied by a colossal volume collapse due to ligand hybridization switching.

cond-mat.str-el↗

arXiv2018

Development of half metallicity within mixed magnetic phase of Cu$_{1-x}$Co$_x$MnSb alloy

Cubic Half-Heusler Cu$_{1-x}$Co$_x$MnSb (0 $\leq$ $x$ $\leq$ 0.1) compounds have been investigated both experimentally and theoretically for their magnetic, transport and electronic properties in search of possible half metallic antiferromagnetism. The systems (Cu,Co)MnSb are of particular interest as the end member alloys CuMnSb and CoMnSb are semi metallic (SM) antiferromagnetic (AFM) and half metallic (HM) ferromagnetic (FM), respectively. Clearly, Co-doping at the Cu-site of CuMnSb introduces changes in the carrier concentration at the Fermi level that may lead to half-metallic ground state but there remains a persistent controversy whether the AFM to FM transition occurs simultaneously. Our experimental results reveal that the AFM to FM magnetic transition occurs through a percolation mechanism where Co-substitution gradually suppresses the AFM phase and forces FM polarization around every dopant cobalt. As a result a mixed magnetic phase is realized within this composition range while a nearly HM band structure is developed already at the 10% Co-doping. Absence of T$^2$ dependence in the resistivity variation at low T-region serves as an indirect proof of opening up an energy gap at the Fermi surface in one of the spin channels. This is further corroborated by the ab-initio electronic structure calculations that suggests a nearly ferromagnetic half-metallic ground state is stabilized by Sb-p holes produced upon Co doping.

cond-mat.str-el↗