arXiv Science⌕ Search

arXiv subjects

Ataberk Olgun

Publications and source records attributed to Ataberk Olgun.

At least 19 recordsLinked to original sources

A Unified Device-Level Physical Framework for DRAM Read Disturbance

Read disturbance in dynamic random-access memory (DRAM) depends on both local device interactions and the electrical conditions imposed by shared array circuitry. Here, we combine DIMM-level characterization results, device measurements, and TCAD simulations to interpret RowHammer, RowPress, and ColumnDisturb within a unified device-level physical framework. We relate charge evolution at the floating storage node to three key mechanisms: trap-assisted electron migration (EM), capacitive coupling (CC), and sense-amplifier-mediated disturb (SAMD). EM is local and trap-sensitive, while CC weakens with wordline separation. SAMD extends disturbance through shared column circuitry by modifying unselected-cell leakage under rail-level bitline biases, a contribution supported by the approximately ninefold higher OFF-state leakage measured relative to retention-like conditions for a high-voltage storage state. These distinct spatial ranges account for localized RowHammer and RowPress failures and remote ColumnDisturb populations with abrupt changes at subarray boundaries. We further interpret prolonged RowPress activation as a transition from an initial RowHammer-like transient to sustained leakage driven mainly by SAMD under held wordline and bitline biases. Within this device-level framework, trap effectiveness and storage-state-dependent leakage provide an interpretation of previously puzzling failure signatures, including the earlier onset of 0-to-1 RowHammer failures despite the predominance of 1-to-0 failures at high hammer counts. The same framework explains the observed RowPress and ColumnDisturb polarities and the duration-dependent reversal of neighboring- and passing-wordline effectiveness. These results provide a physical basis for developing compact DRAM reliability models across access patterns and array configurations.

cond-mat.mes-hall↗

HARE: Fast Read Disturbance Threshold Profiling in Modern DRAM Chips via Reduced Timing Constraints

Modern DRAM chips are vulnerable to read disturbance, which manifests as bitflips in a victim row physically near an aggressor row that is repeatedly activated. State-of-the-art mitigations rely on accurate and exhaustive profiling of the read disturbance threshold (RDT), i.e., the minimum number of aggressor row activations needed to induce the first bitflip. However, RDT changes significantly and unpredictably over time, motivating online profilers that dynamically adjust a mitigation's RDT configuration. RDT profiling is costly for online profilers (e.g., hundreds of seconds for a 16-bank DDR4 module) because 1) measuring a single DRAM row's RDT requires many activations and 2) each DRAM row can have a different RDT, requiring many rows to be profiled. We introduce HARE, an online RDT profiling technique that intentionally exacerbates read disturbance to quickly profile a DRAM module. HARE's key idea is to reduce the timing constraints between consecutive DRAM commands during profiling. Doing so significantly reduces profiling time by 1) directly reducing the execution time of the profiling command sequence and 2) exacerbating read disturbance such that the first bitflip occurs at a smaller activation count than with the conventional RowHammer sequence. From our characterization of 180 real DDR4 DRAM chips from four major DRAM manufacturers, we make three observations. First, HARE measures a DRAM row's RDT 31.2% faster than the RowHammer profiler and a DRAM module's minimum RDT with an average reduction of 21.7%. Second, HARE flips more than 95% of the cells that the RowHammer pattern flips. Third, HARE preserves the RDT ranking of rows well enough such that it can exhaustively reprofile a small set of rows to improve its minimum RDT estimation. Our end-to-end evaluations show that HARE enables significant system performance improvements and outperforms the RowHammer profiler.

cs.AR↗

DaPPA: A Unified Data-Parallel Programming Framework for Efficient Processing-in-Memory Execution

Processing-in-memory (PIM) alleviates data-movement bottlenecks by placing computation near or inside memory. Two general-purpose PIM paradigms are now practical: processing-near-memory (PNM) and processing-using-memory (PUM). Although both target regular, data-intensive, data-parallel workloads, they remain difficult to program because data organization is tightly coupled to computation and differs across substrates. Thus, programmers must manually manage substrate-specific data partitioning, movement, layout, and tiling, preventing program portability across PIM systems. We propose DaPPA (data-parallel processing-in-memory architecture), a programming framework that exposes a single high-level data-parallel pattern interface and retargets it to multiple PIM substrates. The key idea of DaPPA is to decouple the expression of data parallelism from substrate-specific data organization: programmers express computation once using data-parallel patterns and a dataflow interface, while specialized backends automatically generate data orchestration for PNM and multi-level tiling for PUM. We evaluate DaPPA on representative substrates from both PIM paradigms. On the UPMEM PNM system, DaPPA outperforms hand-tuned implementations by 1.6x on average with 95% fewer lines-of-code, and outperforms the state-of-the-art SimplePIM framework by 1.4x on average with 62% fewer lines-of-code. On a SIMDRAM-like PUM substrate, DaPPA outperforms the state-of-the-art MIMDRAM compiler by 2.0x on average (up to 6.4x) across 12 workloads. DaPPA can deploy all ten of our PNM workloads, whereas CINM, the closest framework targeting both paradigms, can deploy only three, on which DaPPA is 2.7--6.8x faster. We open-source DaPPA at https://github.com/CMU-SAFARI/DaPPA.

cs.AR↗

HULK: An Efficient Algorithm for Enabling Fast Bulk Bitwise Operations on Homomorphically Encrypted Data

A wide range of important cloud applications, e.g., database analytics, graph analytics, and genome analysis, spend a considerable amount of time performing bulk bitwise operations (e.g., AND, OR, XOR). These applications often operate on highly sensitive data, making data privacy a critical concern. Homomorphic encryption (HE) enables secure computation on encrypted data without requiring decryption, ensuring privacy in untrusted and shared environments. We analyze 13 end-to-end applications across three domains (healthcare, graph, and database analytics) and observe that bulk bitwise operations take 62-100% of the execution time of the healthcare and graph workloads. The key problem is that existing HE approaches perform them with high-latency homomorphic operations (e.g., multiplication or lookup tables) and significantly increase the data size. Our goal is to enable fast bulk bitwise operations on homomorphically encrypted data by designing an efficient HE algorithm that reduces the use of these costly operations. To this end, we propose HULK, which performs two key steps: (1) it constructs bulk bitwise operations using low-cost homomorphic additions, which compute the Hamming weight of the encrypted operand bits in every slot of a packed ciphertext without any homomorphic multiplication, and (2) it decodes the result of an AND, OR, or XOR from the Hamming weight with a single indicator polynomial, keeping the result in the standard encoding. Across 13 end-to-end applications in healthcare, graph, and database analytics, HULK improves performance over the arithmetic approach used by prior works by up to 7.26x (CPU) and 6.65x (GPU), and on average by 2.32x/1.78x/1.45x (CPU) and 2.08x/1.70x/1.51x (GPU) for healthcare/graph/database analytics. When we increase the reduction depth in a representative application, HULK's speedup grows to 10.10x over the state-of-the-art GPU baseline.

cs.CR↗

MORDOR: Mitigating Overheads of Read Disturbance Preventive Operations via Elastic Refresh Scheduling

Modern DRAM chips are susceptible to read disturbance phenomena such as RowHammer, where repeatedly accessing (hammering) a row of DRAM cells (i.e., a DRAM row) induces bitflips in other physically nearby (victim) DRAM rows. A common practice to avoid such bitflips is to preventively refresh victim rows that might otherwise experience bitflips. Unfortunately, preventive refreshes cause long latencies and need to be performed urgently before the aggressor row is activated again to ensure data integrity. This is done by prioritizing them over demand memory requests, thereby potentially imposing significant delays on those requests and causing performance and energy overheads. Our goal in this work is to alleviate these overheads by scheduling preventive refreshes off the critical path of demand memory requests. We propose MORDOR, a new preventive refresh scheduling policy that significantly reduces system performance degradation and energy consumption caused by preventive refresh operations. MORDOR is integrated into the memory controller and operates alongside memory-controller-based read disturbance mitigation techniques to intelligently delay preventive refresh operations, while maintaining their data integrity guarantees. MORDOR leverages the key observation that a preventive refresh operation targeting an aggressor row can be delayed to serve any other demand memory request, as long as that memory request does not access the aggressor row. By doing so, MORDOR executes latency-critical memory requests before long-latency preventive refresh operations, while mitigating read disturbance bitflips. We evaluate MORDOR by integrating it into six state-of-the-art read disturbance mitigation techniques. Our comprehensive evaluation shows that MORDOR significantly improves system performance and energy efficiency at low area cost.

cs.CR↗

Understanding the Power Consumption of Modern High Bandwidth Memory: Experimental Analysis and Modeling Using Real HBM2 DRAM Chips

We perform the first comprehensive experimental characterization of power consumed by real HBM2 DRAM chips. Our extensive characterization yields 1) the empirical basis for developing new, accurate HBM power models or validating existing power models and 2) key insights into structural and data-pattern-dependent variation of power in HBM2 chips. Out of our 13 new findings and 6 key takeaway messages, we highlight: 1) a read operation consumes significantly higher current than any other operation and 2) the toggled data bus signals in a data transfer burst significantly affect current draw where toggling all HBM2-internal bank group bus signals causes 29.4% higher power consumption than keeping them constant. Leveraging our empirical insights into HBM2 power consumption, we engineer an access pattern that yields 23.6% higher power consumption on average across 36 tested HBM2 chips than the highest-power-consuming JEDEC-specified current measurement loop. Our results have important implications for HBM-based system design and validation. Relying solely on JEDEC- or vendor-specified test loops to bound HBM power could cause system failures and/or thermal throttling in real-world high-power AI/ML workloads. To improve 3D-stacked DRAM power modeling in open source architectural simulation infrastructures, we develop a new HBM power model. Our model predicts the power of 36 real HBM2 chips across diverse workloads (including a real LLM decode workload) with 7.6 -- 8.1% mean absolute percentage error, substantially more accurately than state-of-the-art HBM power models. The power consumption predicted by our model for a power-intensive microbenchmark closely matches (with 2.4% to 5.3% error across HBM3E's specified supply voltage range) the average HBM3E memory power consumed by three tested NVIDIA H200 GPUs. We publicly release our power model at https://github.com/CMU-SAFARI/HBM-Power.

cs.AR↗

Terracotta: Enabling the Adoption of New DRAM Techniques via a Flexible DRAM Interface and Memory Controller

DRAM continues to limit the performance, energy efficiency, and robustness of modern systems. Many prior works propose DRAM techniques that support in-DRAM computation, improve memory access latency and parallelism, and enhance DRAM maintenance and reliability. However, adopting each new technique requires repeated modifications to the rigid DRAM interface and memory controller, hindering its deployment. Our goal is to reduce these repeated modifications. We observe that the DRAM commands and memory controller structures of many DRAM techniques are similar. Our key idea is to use these similarities to compose a set of primitives for implementing diverse DRAM techniques. We propose Terracotta, a new framework with two flexible components: (i) custom command extensions that let DRAM vendors define new commands within a single, standardized interface, and (ii) a programmable memory controller that system designers can program to support new DRAM techniques post-silicon. Together, these enable deployment by configuring the memory controller instead of modifying the interface and controller. We design Terracotta for a DDR5-based system and evaluate its performance, energy, and hardware complexity. For four DRAM techniques from four distinct domains (processing-using-DRAM, low-cost DRAM maintenance, subarray-level parallelism, and latency reduction), Terracotta retains almost all of the performance benefits (>96%) of custom implementations. A Terracotta-based composition of two techniques outperforms the Terracotta-based implementation of each technique alone, demonstrating the benefits of adding techniques without repeated interface and controller modifications. Terracotta incurs low DRAM energy (0.6-3.2%), area (0.03%), and power (0.56%) overheads in a high-end server-grade processor. Terracotta's source code is freely available at https://github.com/CMU-SAFARI/Terracotta.

cs.AR↗

PipeDRAM: A Data-Transposition-Free Processing-Using-DRAM Architecture with Hardware/Software Pipelining

Processing-using-DRAM (PUD) architectures exploit the analog operational properties of DRAM to perform bulk bitwise Boolean and arithmetic operations inside memory arrays by organizing data in a vertical layout, where operand bits are stacked along DRAM columns. However, modern computing systems natively employ a horizontal data layout that preserves the cache line abstraction, leverages spatial locality in row buffers, and enables high memory throughput. This fundamental mismatch forces existing PUD architectures to frequently perform data layout transformations between horizontal and vertical formats, incurring significant performance, energy, and system integration overheads. Our goal is to eliminate data transposition overheads in PUD systems at low cost. To this end, we propose PipeDRAM, a PUD architecture that eliminates the need for runtime data layout transformation, enabling PUD operations directly over horizontally laid-out data. PipeDRAM's key ideas are to (i) deterministically reorganize bits inside each memory request to enable a PUD-friendly data placement within a DRAM array in a horizontal data layout, and (ii) employ a pipeline-based execution model that overlaps bit-dependent and bit-independent in-DRAM operations to exploit bit-level parallelism across the memory array. We compare PipeDRAM to different computing platforms. PipeDRAM provides (i) 11.8x, 11.8x, and 80.4x higher performance and (ii) 25.4x, 3.0x, and 38.0x lower energy consumption than three state-of-the-art PUD systems. PipeDRAM incurs low area cost on top of a DRAM chip (1.86%) and CPU die (0.05%). To enable further research on PUD systems, we open-source PipeDRAM at https://github.com/CMU-SAFARI/PipeDRAM.

cs.AR↗

CertiFlash: A Formal Verification Framework for Flash Translation Layers in Computational Solid State Drives

Data-intensive applications move large amounts of data from storage to the compute unit, incurring significant data movement overhead. Storage-centric computing reduces this overhead by moving computation near or inside solid-state drives (SSDs). Enabling it requires modifying SSD policies, e.g., address translation and garbage collection, which are part of the Flash Translation Layer (FTL), the SSD's firmware. Modifying the FTL is error-prone. Because FTL logic has direct access to security-critical device components, even a functionally correct FTL can leak data between tenants, drop integrity tags, or assign a flash block to the wrong tenant. We show that a faulty FTL can corrupt the device state at five surfaces inside the SSD, and demonstrate them on a DaisyPlus OpenSSD. Prior work verifies individual FTL designs, but has two limitations. (1) It establishes only functional correctness, so a modified FTL can violate isolation, integrity, and ownership and still pass verification. (2) It is tied to a single FTL design, so every modification requires redoing every proof. We propose CertiFlash, a formal verification framework for FTLs, mechanized in the Rocq proof assistant, that gives designers a machine-checked proof of security and correctness. CertiFlash models an FTL as a deterministic state machine with a single global invariant over mapping, isolation, integrity, ownership, and allocation. We prove once, over a general FTL model, that (i) every FTL operation preserves the invariant and (ii) the model refines an idealized block device. For a new design, a designer discharges five hypotheses about its own operations instead of redoing either proof. Across four case studies, a designer adds 27 to 3,231 lines against a 16,489-line framework, significantly reducing the verification effort. CertiFlash is open source.

cs.AR↗

Demystifying DRAM Read Disturbance: Bridging the Gap Between Experimental Characterization and Device-Level Modeling of RowHammer and RowPress Phenomena

DRAM read disturbance, like RowHammer and RowPress, is a critical robustness issue where accessing DRAM can cause unintended bitflips in other unaccessed DRAM locations. DRAM read disturbance bitflips significantly impact the safe, secure, and reliable operation of DRAM-based computing systems. Many prior works experimentally characterize these bitflips and propose mitigations based on empirical results. Other device-level works study their underlying physical mechanisms, but these mechanisms do not fully explain all major empirical observations. Our goal is to bridge the gap between experimental characterization and device-level modeling and understanding of RowHammer and RowPress, providing a principled foundation for future work on understanding, characterizing, and mitigating DRAM read disturbance. We first identify and demonstrate gaps and inconsistencies between the physical mechanisms of RowHammer and RowPress described by existing device-level models and experimental characterization of their bitflips. We focus on three fundamental metrics that should map to first-order physical mechanisms: 1) bitflip directions, 2) bitflip counts, and 3) the minimum number of aggressor row activations that trigger the first bitflips (i.e., ACmin). Second, we present a comprehensive and rigorous set of TCAD simulations that match phenomena observed in experimental characterizations of RowHammer and RowPress bitflips. From our results, we 1) summarize updated device-level error mechanisms for understanding RowHammer and RowPress bitflips, and 2) identify key modeling and simulation parameters that significantly affect whether simulation results match real-chip characterization. We discuss implications for 1) rigorous, comprehensive, and efficient experimental characterization methodologies of DRAM read disturbance bitflips, and 2) the design of DRAM read disturbance mitigation techniques.

cs.AR↗

ColumnKeeper: Efficient Solutions to the ColumnDisturb Vulnerability in DRAM-based Systems

Modern DRAM chips are vulnerable to read disturbance phenomena such as RowHammer and RowPress, which induce bitflips after accessing nearby rows a certain number of times (the read disturbance threshold). ColumnDisturb is a new, fundamentally different DRAM read disturbance phenomenon. Specifically, ColumnDisturb (i) disturbs DRAM columns instead of rows, and (ii) increases the number of affected DRAM cells from those in only a few neighboring rows to all cells across three consecutive DRAM subarrays. We propose ColumnKeeper, the first set of ColumnDisturb mitigations, in two variants: ColumnKeeper-D (CK-D), a deterministic mechanism, and ColumnKeeper-P (CK-P), a probabilistic one. CK-D exploits DRAM's open-bitline architecture to provide deterministic security guarantees at low performance and energy overheads: it uses two counters per subarray to track activations affecting the odd and even columns, and refreshes one row in a subarray when either counter reaches a predetermined threshold. CK-P instead refreshes one row in three consecutive subarrays upon a row activation in the middle subarray, with a predetermined probability, providing configurable security guarantees at low area overhead. Both mechanisms prevent ColumnDisturb bitflips at low performance, energy, and area overheads. At the current experimentally-demonstrated ColumnDisturb threshold (1M), CK-D and CK-P incur very low average single-core performance overheads of 0.15% and 0.36%, respectively. For near-future thresholds (128K), these rise to a still low average of 1.70% and 2.73%. Mitigating ColumnDisturb at low thresholds (e.g., 16K) remains possible by adopting smaller subarray sizes or enabling subarray-level parallelism. CK-D and CK-P require low area overheads of 0.1 mm^2 and 0.03 mm^2, respectively. ColumnKeeper is freely available at https://github.com/CMU-SAFARI/ColumnKeeper .

cs.CR↗

Clutch: High Performance Vector-Scalar Comparison using DRAM via Chunked Temporal Coding

Vector-scalar comparison is a fundamental computation primitive that compares each element in a vector against a single scalar value. It is widely used in various data-intensive workloads from databases to machine learning. Due to its low computational intensity, its execution tends to be memory-bound, limiting the utilization of compute resources. Processing-using-DRAM (PuD) is an emerging computing paradigm that performs massively parallel bitwise operations directly inside DRAM arrays, alleviating off-chip data movement. Existing PuD-based approaches require many DRAM commands because the comparison's algorithmic complexity grows with operand bit-width in the bit-serial execution model. This command overhead becomes the dominant bottleneck, limiting application-level speedup. We propose Clutch, a data representation and comparison algorithm that accelerates vector-scalar comparisons in PuD systems with high efficiency and scalability. Clutch first uses temporal coding, encoding each vector value as a sequence of leading ones, which enables lookup-based comparison against a scalar by accessing the corresponding DRAM row. To avoid the prohibitive memory footprint of lookup tables at high precision, Clutch partitions operands into multiple multi-bit chunks, compares chunks independently using compact lookup tables, and merges the per-chunk results with a PuD-efficient procedure. By adjusting the number of chunks, Clutch provides a flexible tradeoff between throughput and memory usage. Across predicate evaluation and decision tree inference, Clutch improves end-to-end application throughput and energy efficiency by an average of 12x and 69x over highly optimized CPU and GPU execution, and by 2.9x and 3.0x over the state-of-the-art bit-serial PuD implementation. We also present the first mapping of decision tree inference to PuD execution, extending PuD to a new application domain.

cs.AR↗

DejaVu: Why You Should Write to Your DRAM Rows Twice, Carefully

We provide the first experimental demonstration of DejaVu, a phenomenon where the data previously written to DRAM cells affects DRAM's vulnerability to read disturbance. Our experimental characterization using 112 COTS DDR4 DRAM chips from all three major manufacturers shows that, compared to the baseline where we initialize the victim row by writing to it only once, 1) overwriting it with the opposite data reduces ACmin, the minimum aggressor row activation count to induce a bitflip, and 2) writing the same data twice increases ACmin. We provide two hypotheses to explain DejaVu. First, we hypothesize that overwriting the victim row with opposite data values causes under-restoration of charge in DRAM cells. Second, we hypothesize that overwriting the victim row changes charge trap states in the active region, affecting read-disturbance-induced cell leakage current. We conduct controlled characterization to provide insight into these hypotheses. We further characterize the reliability of Processing-Using-DRAM (PUD) operations with DRAM rows initialized with DejaVu patterns. Our characterization of 32-row MAJ-3 operation shows that overwriting the DRAM rows used in the operation reduces the number of bitlines that fail to reliably perform MAJ-3 by 32.7% on average compared to the baseline where rows are written only once. Based on our observations, we describe two major implications of DejaVu. We show how DRAM testing and characterization methodologies should account for DejaVu to accurately characterize read disturbance vulnerability under fixed data patterns and rigorously study data-pattern effects without unintended interference from DejaVu. We also evaluate the performance overhead of read disturbance mitigation techniques when thresholds need to be lowered to be secure against DejaVu, showing a 6.3% overhead when reducing the threshold by 20%.

cs.AR↗

Ramulator 2.1: A Composable Memory System Simulator for Modern DRAM Systems

Ramulator 2.1 is a major overhaul of Ramulator 2.0 that substantially improves the simulator in three directions: 1) support of modern and emerging DRAM and memory-controller features, 2) better usability and extensibility of the simulator, and 3) more comprehensive tests and validation workflows. Ramulator 2.1 adds support for advanced features in recent and emerging DRAM standards and memory controllers, including HBM3/4, LPDDR5/6, and GDDR7. To improve usability and extensibility, Ramulator 2.1 introduces a Python-based modeling and configuration interface backed by a two-way code-generation framework that 1) hides low-level C++ code behind high-level DRAM specifications written in Python, and 2) automatically creates Python proxies for all components of the simulator. Doing so enables users to rapidly create variants of DRAM standards and automate design-space-exploration workflows. To improve trustworthiness in simulation results, Ramulator 2.1 provides a comprehensive testing and validation infrastructure that covers both 1) fine-grained validation of specific DRAM timing constraints and memory-controller scheduling behavior, and 2) system-level performance evaluation using latency-throughput curves. To aid performance analysis and debugging, Ramulator 2.1 also includes an easy-to-use and high-performance DRAM command trace visualizer. Ramulator 2.1 is open-source on GitHub and under active development.

cs.AR↗

Memory-Centric Computing: Security Benefits and Challenges of Processing-in-DRAM

Today's computing systems are processor-centric: they require frequent data movement between processing elements (e.g., CPU) and main memory (DRAM), leading to significant inefficiencies in performance and energy consumption. Memory-centric computing instead moves computation to the data, enabling computation capability in and near all places where data is generated and stored, and greatly reducing the performance and energy overheads of data access and data movement. This shift from a processor-centric to a memory-centric paradigm has important and underexplored consequences for system security. Turning memory from a dumb, inactive store into an active computing substrate introduces benefits as well as challenges for system security: it can provide new in-memory security primitives and also reduce data exposure, but it can also expose new attack surfaces. This work discusses the security benefits and challenges of memory-centric computing, specifically Processing-in-DRAM (PiD), a paradigm where the operational characteristics of a DRAM chip are exploited and enhanced to perform computation on data stored in DRAM. Specifically, we describe 1) new state-of-the-art DRAM-based true random number generators that provide up to 16.05 Gb/s throughput and physical unclonable functions with 5.75% lower evaluation latency than the prior state-of-the-art, both on real DRAM chips and 2) two key security challenges of PiD: amplified DRAM read disturbance (e.g., 158x reduction in the minimum number of DRAM accesses required to induce the first bitflip) and high throughput memory timing channels (e.g., a communication throughput of 14.8Mb/s). We believe it is time to design, use, and program DRAM, and in general memory, not as an inactive storage substrate, but as a combined computation, storage, and security substrate, where computational capability, storage density, and security are all key goals.

cs.CR↗

PuDGhost: Experimental Analysis of Computation Result Corruption in Processing-using-DRAM Operations on Real DRAM Chips and Implications for Future Systems

Processing-using-DRAM (PuD) is a promising computation paradigm that alleviates frequent data movement between main memory and processing units by using each DRAM column as a computation engine via simultaneous multiple-row activation (SiMRA). Unfortunately, DRAM density scaling may hinder PuD's benefits: denser cell arrays bring rows and columns closer, making regular DRAM operations susceptible to noise and interference from neighboring cells. Yet no prior work investigates whether interference from rows or columns not intended to participate in computation can compromise PuD robustness. In this work, we reveal PuDGhost, an interference phenomenon where a PuD operation in a given column produces erroneous results due to interference from 1) data in non-activated DRAM rows and 2) data in other columns that compute concurrently under the same SiMRA operation. PuDGhost violates the ideal picture that each column's computation depends solely on its own operand data, threatening future PuD systems. We present the first extensive characterization of PuDGhost using 96 real DDR4 DRAM chips from 12 modules, quantifying these two interference sources under various conditions. Among our 15 new empirical observations, we highlight two major results: 1) data in adjacent non-activated rows affects SiMRA outputs by up to 10% for random inputs, and 2) data in concurrently computing columns affects SiMRA outputs by up to 48% for random inputs. Guided by these findings, we propose countermeasures across multiple layers of the PuD computing stack. Specifically, we evaluate on real DDR4 DRAM chips: 1) robust column screening that reduces the risk of using unreliable columns in the presence of PuDGhost, and 2) a compute row layout that mitigates PuDGhost via dedicated rows between compute rows. Our solutions greatly improve PuD computation accuracy and provide a foundation for robust future PuD systems.

cs.AR↗

In-DRAM Signature Generation Using Simultaneous Multiple-Row Activation: An Experimental Study of Off-The-Shelf DRAM Chips

We experimentally demonstrate that it is possible to generate unique, repeatable, and device-specific signatures suitable for use as Physical Unclonable Function (PUF) responses in commercial off-the-shelf (COTS) DRAM chips by leveraging simultaneous multiple-row activation (SiMRA). Based on a rigorous experimental characterization of 112 modern DDR4 DRAM chips (from 10 modules), we introduce SiMRA-PUF, the first DRAM-based PUF that uses SiMRA-generated signatures as PUF responses. We analyze SiMRA-PUF in terms of reliability, uniqueness, and evaluation latency for varying numbers of simultaneously activated DRAM rows (i.e., 2, 4, 8, 16, and 32), DRAM chip density & die revision, and evaluate how temperature affects the similarity of SiMRA-generated responses. Among our 8 key experimental observations, we highlight two major results. First, SiMRA-PUF provides average intra-Jaccard indices of 89.02%, 89.81%, 93.03%, 94.06%, and 94.86%, and average inter-Jaccard indices of 3.98%, 2.37%, 3.44%, 2.92%, and 3.24% for 2-, 4-, 8-, 16-, and 32-row activations, respectively, showing that SiMRA-generated signatures are both repeatable within a device and unique across devices. Second, 2-row activation-based SiMRA-PUF provides 5.75% lower evaluation latency than the state-of-the-art DRAM-based PUF. We open-source our infrastructure and datasets at https://github.com/CMU-SAFARI/SiMRA-PUF.

cs.AR↗

Extended Abstract: Re-Evaluating the Real-System Modeling Accuracy of Ramulator 2.0

Cycle-level DRAM simulators provide accurate and flexible models for DRAM and memory controller operations and enable research on current and future memory systems. Therefore, they are critical for improving the performance, efficiency, and robustness of DRAM-based memory systems. Ramulator 2.0 (successor of Ramulator) is a highly modular and extensible cycle-accurate DRAM simulator that enables rapid exploration of new ideas in DRAM-based memory systems. A MICRO 2024 best paper runner-up publication, A Mess of Memory System Benchmarking, Simulation and Application Profiling, which we refer to as "the Mess paper," with all three artifact badges awarded (including "Reproducible"), proposes a new benchmark to evaluate real and simulated memory system performance. While doing so, it makes strong negative claims about Ramulator 2.0 and shows unexpected results. In this talk and the associated extended abstract, we demonstrate that these results and claims in the Mess paper are incorrect and are due to configuration and simulator usage errors made in the Mess paper. We describe four best practices to aid users and developers of simulation tools to avoid such issues in the future. We emphasize the importance of contacting simulator authors and developers when unexpected results are observed (especially and importantly before publishing such results), to ensure these simulators are used with correct configurations and as intended. Our investigation also aims to stimulate discussion on artifact evaluation practices and on mechanisms for correcting results and artifacts after publication. To aid future works and reproduction of all our results, we open source all our code and scripts at https://github.com/CMU-SAFARI/Cleaning-up-the-Mess. We refer the reader to our full ISPASS 2026 paper and its artifact for the complete analysis, detailed methodology, and extended results.

cs.AR↗