arXiv subjects

Asser Elsayed

Publications and source records attributed to Asser Elsayed.

6 recordsLinked to original sources

arXiv2026

Confinement drives valley splitting above 4K in buried silicon quantum wells

Controlling the energy scales of a quantum system is essential for defining robust qubits. In silicon spin qubits, the nearly degenerate conduction-band valleys create a leakage channel from the single-spin computational basis, posing a challenge to scaling and to shuttling-based architectures. Here, we measure the relevant energy scales of single-electron spin qubits in buried silicon quantum wells co-designed for low disorder and high valley splitting. Across a linear array of four quantum dots with an average orbital energy of 2.4(2) meV, we report an average single-electron valley splitting of 0.40(6) meV and an average two-electron singlet-triplet splitting of 0.24(7) meV. In three dots, we observe a strong correlation between valley splitting and orbital energy, with an average linear coefficient of $\approx 0.22$ (meV/meV), demonstrating that electrostatic confinement can increase the valley splitting by several hundred microelectronvolts. In contrast, the remaining dot exhibits the highest valley splitting of 0.76(2) meV and low correlation, suggesting excellent characteristics for spin-qubit operation. Our findings demonstrate that strong confinement can be exploited in buried quantum wells to effectively enhance the valley splitting, thereby establishing a viable path toward the realization of shuttling and sparse-occupation-based architectures in low-disorder heterostructures.

cond-mat.mes-hall↗

arXiv2025

Using Landau quantization to probe disorder in semiconductor heterostructures

Understanding scattering mechanisms in semiconductor heterostructures is crucial to reducing sources of disorder and ensuring high yield and uniformity in large spin qubit arrays. Disorder of the parent two-dimensional electron or hole gas is commonly estimated by the critical, percolation-driven density associated with the metal-insulator transition. However, a reliable estimation of the critical density within percolation theory is hindered by the need to measure conductivity with high precision at low carrier densities, where experiments are most difficult. Here, we connect experimentally percolation density and quantum Hall plateau width, in line with an earlier heuristic intuition, and offer an alternative method for characterizing semiconductor heterostructure disorder.

cond-mat.mes-hall↗

arXiv2025

QARPET: A Crossbar Chip for Benchmarking Semiconductor Spin Qubits

Large-scale integration of semiconductor spin qubits into quantum processors hinges on the ability to characterize quantum components at scale, a task challenged by their operation at sub-kelvin temperatures, in the presence of magnetic fields, and by the use of radio-frequency signals. Here, we present QARPET (Qubit-Array Research Platform for Engineering and Testing), a scalable architecture for characterizing spin qubits using a quantum dot crossbar array. The crossbar features tightly-pitched spin qubit tiles and is implemented in planar germanium, by fabricating a large device with the potential to host 1058 hole spin qubits. Measurements on a patch of 40 tiles demonstrate key device functionality at millikelvin temperatures, including tile addressability, threshold voltage and charge noise statistics, and the characterisation of hole spin qubits and their coherence times in a single tile. These demonstrations pave the way for a new generation of quantum devices designed for the statistical characterisation of spin qubits.

cond-mat.mes-hall↗

arXiv2024

Exploiting epitaxial strained germanium for scaling low noise spin qubits at the micron-scale

Disorder in the heterogeneous material stack of semiconductor spin qubit systems introduces noise that compromises quantum information processing, posing a challenge to coherently control large-scale quantum devices. Here, we exploit low-disorder epitaxial strained quantum wells in Ge/SiGe heterostructures grown on Ge wafers to comprehensively probe the noise properties of complex micron-scale devices comprising of up to ten quantum dots and four rf-charge sensors arranged in a two-dimensional array. We demonstrate an average charge noise of $\sqrt{S_{0}}=0.3(1)$ $\mu\mathrm{eV}/\sqrt{\mathrm{Hz}}$ at 1 Hz across different locations on the wafer, providing a benchmark for quantum confined holes. We then establish hole-spin qubit control in these heterostructures and extend our investigation from electrical to magnetic noise through spin echo measurements. Exploiting dynamical decoupling sequences, we quantify the power spectral density components arising from the hyperfine interaction with $^{73}$Ge spinful isotopes and identify coherence modulations associated with the interaction with the $^{29}$Si nuclear spin bath near the Ge quantum well. We estimate an integrated hyperfine noise amplitude $\sigma_f$ of 180(8) kHz from $^{73}$Ge and of 47(5) kHz from $^{29}$Si, underscoring the need for full isotopic purification of the qubit host environment.

cond-mat.mes-hall↗

arXiv2022

Low charge noise quantum dots with industrial CMOS manufacturing

Silicon spin qubits are among the most promising candidates for large scale quantum computers, due to their excellent coherence and compatibility with CMOS technology for upscaling. Advanced industrial CMOS process flows allow wafer-scale uniformity and high device yield, but off the shelf transistor processes cannot be directly transferred to qubit structures due to the different designs and operation conditions. To therefore leverage the know-how of the micro-electronics industry, we customize a 300mm wafer fabrication line for silicon MOS qubit integration. With careful optimization and engineering of the MOS gate stack, we report stable and uniform quantum dot operation at the Si/SiOx interface at milli-Kelvin temperature. We extract the charge noise in different devices and under various operation conditions, demonstrating a record-low average noise level of 0.61 ${\mu}$eV/${\sqrt{Hz}}$ at 1 Hz and even below 0.1 ${\mu}$eV/${\sqrt{Hz}}$ for some devices and operating conditions. By statistical analysis of the charge noise with different operation and device parameters, we show that the noise source can indeed be well described by a two-level fluctuator model. This reproducible low noise level, in combination with uniform operation of our quantum dots, marks CMOS manufactured MOS spin qubits as a mature and highly scalable platform for high fidelity qubits.

cond-mat.mes-hall↗

arXiv2021

High mobility SiMOSFETs fabricated in a full 300mm CMOS process

The quality of the semiconductor-barrier interface plays a pivotal role in the demonstration of high quality reproducible quantum dots for quantum information processing. In this work, we have measured SiMOSFET Hall bars on undoped Si substrates in order to investigate the quality of the devices fabricated in a full CMOS process. We report a record mobility of 17'500 cm2/Vs with a sub-10 nm oxide thickness indicating a high quality interface, suitable for future qubit applications. We also study the influence of gate materials on the mobilities and discuss the underlying mechanisms, giving insight into further material optimization for large scale quantum processors.

cond-mat.mes-hall↗