arXiv subjects

Arif Hussain

Publications and source records attributed to Arif Hussain.

2 recordsLinked to original sources

arXiv2026

DC-CLM: Extending the WECC Composite Load Model for AI Data Center Dynamics

The rapid growth of AI-driven data centers is introducing load behaviors that are not explicitly represented in conventional composite load models. This paper presents DC-CLM, a workload-aware extension of the WECC composite load model that incorporates UPS-supported IT demand, mixed motor/VFD cooling loads, auxiliary demand, and training, inference, and idle workload profiles. A rule-based supervisory state machine represents grid, battery, and diesel operating states and captures temporary IT-load isolation and workload-dependent restoration following voltage recovery. The model is implemented in MATLAB/Simulink using positive-sequence phasor-domain simulation and evaluated under fault-induced delayed voltage recovery (FIDVR) conditions. For a study system with a 100~MW conventional composite load and a 200~MW data-center load, the long-duration voltage recovery is governed mainly by conventional stalled-motor thermal dynamics, while the first 100~ms after fault clearance is strongly workload-dependent. Training and inference produce approximately 50--52~mpu voltage variation and 751--755~MW active-power variation, compared with approximately 36~mpu and 654~MW for idle operation. The results demonstrate the value of incorporating data-center-specific load dynamics into transmission-level stability studies while highlighting the need for future measurement-based validation and more detailed converter-level modeling.

eess.SP↗

arXiv2025

Thermal quench modeling of REBCO racetrack coils under conduction cooling at 30 K for aircraft electric propulsion motors

High-temperature superconducting (HTS) racetrack coils are promising components for lightweight, high-power electric machines due to their exceptional current-carrying capacity. However, self-heating due to AC loss or DC short circuits can cause electro-thermal quench, which poses a significant challenge for the design and reliability of superconducting motors. Here, we apply an electro-magneto-thermal computational approach that integrates the Minimum Electro-Magnetic Entropy Production (MEMEP) method for electromagnetic modelling with the Finite Difference Method (FDM) for electrothermal analyses. The investigation focuses on the response of an HTS racetrack coil subjected to DC voltages ranging from low (1 V) to high values (1000 V) at operating temperature of 30 K. Computations were conducted under two thermal boundary conditions: complete adiabatic conditions and cooling applied to one side of the coil with the top surface at 30 K. We found that at higher voltages, the current exceeds the critical value, causing rapid thermal runaway that damages the superconducting material. In contrast, at lower voltages, the coil presents periodic oscillations in current and temperature, demonstrating a complex interplay of thermal diffusion and electromagnetic stability. This study provides critical insights into the thermal management and fault response of HTS coils for aviation applications, particularly in the design of superconducting motors for electric aircraft.

physics.app-ph↗