arXiv subjects

Antonio Brogi

Publications and source records attributed to Antonio Brogi.

At least 19 recordsLinked to original sources

arXiv2026

StableShots: Online Shot Stopping for Quantum Circuit Execution

Quantum circuit execution estimates output distributions by repeated measurements, yet developers commonly choose a fixed shot budget before execution. This static choice is brittle: low budgets can under-sample the distribution, while high budgets waste measurements. In this paper, we present StableShots, a black-box online stopping rule for static quantum circuits. The method executes a fixed circuit in small batches, monitors the total-variation distance between cumulative empirical distributions, and stops after repeated evidence of local stability. We evaluate StableShots on 180 QSimBench traces spanning six circuit families, six sizes from 4 to 14 qubits, and five noisy IBM simulated backends. With validation-only calibration and 100 repeated backend-holdout splits, the selected configuration reaches TVD <= 0.05 on all held-out test evaluations with median 7,650 shots, whereas fixed-shot baselines either fail more often or spend substantially more shots.

quant-ph↗

arXiv2026

How Many Shots Are Enough for a Quantum Circuit?

Quantum algorithms require repeated circuit executions, known as shots, to estimate output distributions accurately. Determining the minimal number of shots needed to meet a target accuracy is crucial to reduce costs and resource usage, especially on today's noisy and expensive quantum hardware. In this paper, we address the shot optimisation problem in a black-box setting, where no assumptions are made about the structure of the quantum circuit or the noise model of the backend. We introduce IncrementalExecution, a novel online framework that dynamically determines when to stop executing shots based on the principle of point of diminishing returns: the point at which additional shots no longer significantly alter the empirical distribution of a fixed circuit. The framework supports customisable policies for shot management, enabling flexible trade-offs between execution cost and result fidelity within static execution scenarios. We assess our proposal through an extensive experimental evaluation spanning 33,750 framework configurations across 180 unique static quantum circuit-backend combinations, for a total of 7.3M independent experiments. Unlike prior work that relies on problem-specific knowledge or algorithm-dependent assumptions (e.g., variational or adaptive workflows), our approach is applicable to a large set of static circuits and immediately deployable on current quantum cloud platforms.

quant-ph↗

arXiv2026

A Neurosymbolic Prolog Skill for LLM-Driven Service Placement

Service placement in the cloud-edge continuum requires assigning application components to heterogeneous resources under multiple constraints, including latency, locality, and policy requirements. Existing approaches rely on optimisation models or heuristics that require explicit modelling, while neural methods lack transparency and formal guarantees. This work proposes a neuro-symbolic alternative based on a Prolog skill, a reusable interface for schema-constrained fact generation and querying, for constraint-aware placement. The skill enables a language model to structure placement intent into symbolic facts, rules, and queries, while delegating validation and reasoning to Prolog. This design bridges high-level intent and formal constraint evaluation, enabling inspectable and policy-aware placement decisions in cloud-edge environments.

cs.DC↗

arXiv2026

The Need for a Green ICT Reference Framework

The sustainability impacts of ICT systems are difficult to assess and govern due to structural complexity, fragmented measurement practices, and unclear responsibilities across system layers. We argue that these challenges cannot be addressed solely by metrics and motivate the need for a shared Green ICT reference framework that integrates sustainability across multiple perspectives and domains, lifecycle phases, and governance contexts. We present an initial framework developed within the Informatics Europe Green ICT Working Group as a first step towards a comprehensive reference framework.

cs.SE↗

arXiv2026

Failure-Resilient and Carbon-Efficient Deployment of Microservices over the Cloud-Edge Continuum

Deploying microservice-based applications (MSAs) on heterogeneous and dynamic Cloud-Edge infrastructures requires balancing conflicting objectives, such as failure resilience, performance, and environmental sustainability. In this article, we introduce the FREEDA toolchain, designed to automate the failure-resilient and carbon-efficient deployment of MSAs over the Cloud-Edge Continuum. The FREEDA toolchain continuously adapts deployment configurations to changing operational conditions, resource availability, and sustainability constraints, aiming to maintain the MSA quality and service continuity while reducing carbon emissions. We also introduce an experimental suite using diverse simulated and emulated scenarios to validate the effectiveness of the toolchain against real-world challenges, including resource exhaustion, node failures, and carbon intensity fluctuations. The results demonstrate FREEDA's capability to autonomously reconfigure deployments by migrating services, adjusting flavour selections, or rebalancing workloads, successfully achieving an optimal balance among resilience, efficiency, and environmental impact.

cs.DC↗

arXiv2025

Rethinking Services in the Quantum Age: The SOQ Paradigm

Quantum computing is rapidly progressing from theoretical promise to practical implementation, offering significant computational advantages for tasks in optimization, simulation, cryptography, and machine learning. However, its integration into real-world software systems remains constrained by hardware fragility, platform heterogeneity, and the absence of robust software engineering practices. This paper introduces Service-Oriented Quantum (SOQ), a novel paradigm that reimagines quantum software systems through the lens of classical service-oriented computing. Unlike prior approaches such as Quantum Service-Oriented Computing (QSOC), which treat quantum capabilities as auxiliary components within classical systems, SOQ positions quantum services as autonomous, composable, and interoperable entities. We define the foundational principles of SOQ, propose a layered technology stack to support its realization, and identify the key research and engineering challenges that must be addressed, including interoperability, hybridity, pricing models, service abstractions, and workforce development. This approach is of vital importance for the advancement of quantum technology because it enables the scalable, modular, and interoperable integration of quantum computing into real-world software systems independently and without relying on a dedicated classical environment to manage quantum processing.

cs.SE↗

arXiv2025

Evaluating Security Properties in the Execution of Quantum Circuits

Quantum computing is a disruptive technology that is expected to offer significant advantages in many critical fields (e.g. drug discovery and cryptography). The security of information processed by such machines is therefore paramount. Currently, modest Noisy Intermediate-Scale Quantum (NISQ) devices are available. The goal of this work is to identify a practical, heuristic methodology to evaluate security properties, such as secrecy and integrity, while using quantum processors owned by potentially untrustworthy providers.

quant-ph↗

arXiv2025

Quantum Executor: A Unified Interface for Quantum Computing

As quantum computing evolves from theoretical promise to practical deployment, the demand for robust, portable, and scalable tools for quantum software experimentation is growing. This paper introduces Quantum Executor, a backend-agnostic execution engine designed to orchestrate quantum experiments across heterogeneous platforms. Quantum Executor provides a declarative and modular interface that decouples experiment design from backend execution, enabling seamless interoperability and code reuse across diverse quantum and classical resources. Key features include support for asynchronous and distributed execution, customizable execution strategies and a unified API for managing quantum experiments. We illustrate its applicability through two life-like usage scenarios such as automated benchmarking and hybrid validation, discussing its capacity to streamline quantum development. We conclude by discussing current limitations and outlining a roadmap for future enhancements.

quant-ph↗

arXiv2025

Combining Declarative and Linear Programming for Application Management in the Cloud-Edge Continuum

This work investigates the data-aware multi-service application placement problem in Cloud-Edge settings. We previously introduced EdgeWise, a hybrid approach that combines declarative programming with Mixed-Integer Linear Programming (MILP) to determine optimal placements that minimise operational costs and unnecessary data transfers. The declarative stage pre-processes infrastructure constraints to improve the efficiency of the MILP solver, achieving optimal placements in terms of operational costs, with significantly reduced execution times. In this extended version, we improve the declarative stage with continuous reasoning, presenting EdgeWiseCR, which enables the system to reuse existing placements and reduce unnecessary recomputation and service migrations. In addition, we conducted an expanded experimental evaluation considering multiple applications, diverse network topologies, and large-scale infrastructures with dynamic failures. The results show that EdgeWiseCR achieves up to 65% faster execution compared to EdgeWise, while preserving placement stability under dynamic conditions.

cs.DC↗

arXiv2025

Declarative Traffic Engineering for Low-Latency and Reliable Networking

Cloud-Edge applications like industrial control systems and connected vehicles demand stringent end-to-end latency guarantees. Among existing data plane candidate solutions for bounded latency networking, the guaranteed Latency-Based Forwarding (gLBF) approach ensures punctual delivery of traffic flows by managing per-hop delays to meet specific latency targets, while not requiring that per-flow states are maintained at each hop. However, as a forwarding plane mechanism, gLBF does not define the control mechanisms for determining feasible forwarding paths and per-hop latency budgets for packets to fulfil end-to-end latency objectives. In this work, we propose such a control mechanism implemented in Prolog that complies with gLBF specifications, called declarative gLBF (dgLBF). The declarative nature of Prolog allows our prototype to be concise (~120 lines of code) and easy to extend. We show how the core dgLBF implementation is extended to add reliability mechanisms, path protection, and fate-sharing avoidance to enhance fault tolerance and robustness. Finally, we evaluate the system's performance through simulative experiments under different network topologies and with increasing traffic load to simulate saturated network conditions, scaling up to 6000 flows. Our results show a quasi-linear degradation in placement times and system resilience under heavy traffic.

cs.NI↗

arXiv2025

ECLYPSE: a Python Framework for Simulation and Emulation of the Cloud-Edge Continuum

The Cloud-Edge continuum enhances application performance by bringing computation closer to data sources. However, it presents considerable challenges in managing resources and determining service placement, as these tasks require navigating diverse, dynamic environments characterised by fluctuating network conditions. Addressing these challenges calls for tools combining simulation and emulation of Cloud-Edge systems to rigorously assess novel application and resource management strategies. In this paper, we introduce ECLYPSE, a Python-based framework that enables the simulation and emulation of the Cloud-Edge continuum via adaptable resource allocation and service placement models. ECLYPSE features an event-driven architecture for dynamically adapting network configurations and resources. It also supports seamless transitions between simulated and emulated setups. In this work, ECLYPSE capabilities are illustrated over three use cases, showing how the framework supports rapid prototyping across diverse experimental settings.

cs.NI↗

arXiv2025

Declarative Application Management in the Fog. A bacteria-inspired decentralised approach

Orchestrating next gen applications over hterogeneous resources along the Cloud-IoT continuum calls for new strategies and tools to enable scalable and application-specific managements. Inspired by the self-organisation capabilities of bacteria colonies, we propose a declarative, fully decentralised application management solution, targeting pervasive opportunistic Cloud-IoT infrastructures. We present acustomisable declarative implementation of the approach and validate its scalability through simulation over motivating scenarios, also considering end-user's mobility and the possibility to enforce application-specific management policies for different classes of applications.

cs.DC↗

arXiv2024

Comparison of Static Analysis Architecture Recovery Tools for Microservice Applications

Architecture recovery tools help software engineers obtain an overview of the structure of their software systems during all phases of the software development life cycle. This is especially important for microservice applications because they consist of multiple interacting microservices, which makes it more challenging to oversee the architecture. Various tools and techniques for architecture recovery (also called architecture reconstruction) have been presented in academic and gray literature sources, but no overview and comparison of their accuracy exists. This paper presents the results of a multivocal literature review with the goal of identifying architecture recovery tools for microservice applications and a comparison of the identified tools' architectural recovery accuracy. We focused on static tools since they can be integrated into fast-paced CI/CD pipelines. 13 such tools were identified from the literature and nine of them could be executed and compared on their capability of detecting different system characteristics. The best-performing tool exhibited an overall F1-score of 0.86. Additionally, the possibility of combining multiple tools to increase the recovery correctness was investigated, yielding a combination of four individual tools that achieves an F1-score of 0.91. Registered report: The methodology of this study has been peer-reviewed and accepted as a registered report at MSR'24: arXiv:2403.06941

cs.SE↗

arXiv2024

Distributing Quantum Computations, Shot-wise

NISQ (Noisy Intermediate-Scale Quantum) era constraints, high sensitivity to noise and limited qubit count, impose significant barriers on the usability of QPUs (Quantum Process Units) capabilities. To overcome these challenges, researchers are exploring methods to maximize the utility of existing QPUs despite their limitations. Building upon the idea that the execution of a quantum circuit's shots needs not to be treated as a singular monolithic unit, we propose a methodological framework, termed shot-wise, which enables the distribution of shots for a single circuit across multiple QPUs. Our framework features customizable policies to adapt to various scenarios. Additionally, it introduces a calibration method to pre-evaluate the accuracy and reliability of each QPU's output before the actual distribution process and an incremental execution mechanism for dynamically managing the shot allocation and policy updates. Such an approach enables flexible and fine-grained management of the distribution process, taking into account various user-defined constraints and (contrasting) objectives. Experimental findings show that while these strategies generally do not exceed the best individual QPU results, they maintain robustness and align closely with average outcomes. Overall, the shot-wise methodology improves result stability and often outperforms single QPU runs, offering a flexible approach to managing variability in quantum computing.

quant-ph↗

arXiv2024

Carbon-aware Software Services

The significant carbon footprint of the ICT sector calls for methodologies to contain carbon emissions of running software. This article proposes a novel framework for implementing, configuring and assessing carbon-aware interactive software services. First, we propose a methodology to implement carbon-aware services leveraging the Strategy design pattern to feature alternative service versions with different energy consumption. Then, we devise a bilevel optimisation scheme to configure which version to use at different times of the day, based on forecasts of carbon intensity and service requests, pursuing the two-fold goal of minimising carbon emissions and maintaining average output quality above a desired set-point. Last, an open-source prototype of such optimisation scheme is used to configure a software service implemented as per our methodology and assessed against traditional non-adaptive implementations of the same service. Results show the capability of our framework to control the average quality of output results of carbon-aware services and to reduce carbon emissions from 8% to 50%.

cs.SE↗

arXiv2024

From Quantum Mechanics to Quantum Software Engineering: A Historical Review

Victor Hugo's timeless observation, "Nothing is more powerful than an idea whose time has come", resonates today as Quantum Computing, once only a dream of a physicist, stands at the threshold of reality with the potential to revolutionise the world. To comprehend the surge of attention it commands today, one must delve into the motivations that birthed and nurtured Quantum Computing. While the past of Quantum Computing provides insights into the present, the future could unfold through the lens of Quantum Software Engineering. Quantum Software Engineering, guided by its principles and methodologies investigates the most effective ways to interact with Quantum Computers to unlock their true potential and usher in a new era of possibilities. To gain insight into the present landscape and anticipate the trajectory of Quantum Computing and Quantum Software Engineering, this paper embarks on a journey through their evolution and outlines potential directions for future research. By doing so, we aim to equip readers (ideally software engineers and computer scientists not necessarily with quantum expertise) with the insights necessary to navigate the ever-evolving landscape of Quantum Computing and anticipate the trajectories that lie ahead.

quant-ph↗

arXiv2024

Quantum Software Engineering: Roadmap and Challenges Ahead

As quantum computers advance, the complexity of the software they can execute increases as well. To ensure this software is efficient, maintainable, reusable, and cost-effective -key qualities of any industry-grade software-mature software engineering practices must be applied throughout its design, development, and operation. However, the significant differences between classical and quantum software make it challenging to directly apply classical software engineering methods to quantum systems. This challenge has led to the emergence of Quantum Software Engineering as a distinct field within the broader software engineering landscape. In this work, a group of active researchers analyse in depth the current state of quantum software engineering research. From this analysis, the key areas of quantum software engineering are identified and explored in order to determine the most relevant open challenges that should be addressed in the next years. These challenges help identify necessary breakthroughs and future research directions for advancing Quantum Software Engineering.

cs.SE↗

arXiv2024

Comparison of Static Analysis Architecture Recovery Tools for Microservice Applications

Architecture recovery tools help software engineers obtain an overview of their software systems during all phases of the software development lifecycle. This is especially important for microservice applications because their distributed nature makes it more challenging to oversee the architecture. Various tools and techniques for this task are presented in academic and grey literature sources. Practitioners and researchers can benefit from a comprehensive overview of these tools and their abilities. However, no such overview exists that is based on executing the identified tools and assessing their outputs regarding effectiveness. With the study described in this paper, we plan to first identify static analysis architecture recovery tools for microservice applications via a multi-vocal literature review, and then execute them on a common dataset and compare the measured effectiveness in architecture recovery. We will focus on static approaches because they are also suitable for integration into fast-paced CI/CD pipelines.

cs.SE↗