arXiv ScienceSearch

arXiv subjects

Anthony Tang

Publications and source records attributed to Anthony Tang.

At least 19 recordsLinked to original sources

UncertaintyVis: Preserving Linguistic Uncertainty in Automated Text-to-Chart Generation

Data-rich documents pair narrative text with quantitative claims, and authors routinely qualify those claims with linguistic uncertainty markers such as "nearly," "approximately," or "at least." Automated text-to-chart systems discard these markers, producing visualizations that appear definitive even when the source text expresses hedged or incomplete knowledge. Readers may then over-interpret precision and misjudge author intent. We present UncertaintyVis, a system that preserves linguistic uncertainty during automated chart generation. A formative corpus analysis of 211 uncertainty expressions across 12 documents and 8 domains yielded a four-category taxonomy: Surface Form Normalization, Precision Boundaries, Inferential Derivation, and Non-Inferable Gaps. We mapped each category to chart-specific visual encodings that signal uncertainty without disturbing the spatial integrity readers rely on, and implemented an end-to-end pipeline pairing large language model text analysis with uncertainty-aware rendering. In a two-part study with 12 participants, readers matched charts to source text with 85% accuracy and text to charts with 76%. Uncertainty-aware visualizations trended toward lower cognitive demand (effect sizes 0.460 and 0.769 for mental demand and effort), and 75% of participants preferred them to plain text, describing explicit uncertainty encodings as a basis for verifying data claims. Encoding effectiveness varied by chart type: bar and pie encodings performed consistently, while line chart encodings require redesign.

cs.HC

Reshaping Undergraduate Computer Science Education in the Generative AI Era

Generative AI represents a turning point for Computer Science (CS) education. In recent decades, post-secondary CS education has largely focused on what has been seen as practical software engineering skills: implementation-level programming, debugging, testing, and software design, analysis, and documentation. However, this framing is becoming less tenable as generative AI automates many of these tasks, challenging their centrality in CS education. To keep pace with advances in AI technology, CS curricula should consider a shift toward understanding and verifying AI-generated artifacts. This white paper outlines the findings of two international NUS-Google Workshops in Singapore, where we convened faculty members, industry practitioners, and students, and proposes a strategic response to reshape how CS should be taught at the undergraduate level. Based on the findings, we identify critical skills that must be preserved and those that are becoming less important. By incorporating these skills as "breadcrumbs," we can provide helpful nudges and engaging exercises within the current curriculum, enhancing learning experiences for everyone. We believe that to effectively prepare future computer science graduates, capable of creating, solving problems, and managing, as well as co-creating, artifacts with AI. It is important to consider a shift in curricula. Emphasizing system design, abstraction, and critical evaluation could greatly enhance their education and readiness for the challenges ahead. We propose prerequisites for solutions to reform CS education by fostering AI-native competencies, re-centering fundamental education, enhancing advanced pathways, embracing new pedagogies, and shifting institutional support.

cs.CY

FaceValue: Exploring Real-Time Self-View Overlays to Prompt Meaning-Oriented Self-Awareness in Remote Meetings

In remote video meetings, visual non-verbal cues, such as facial expressions or head movements, are seen continuously but often only partially. This increases ambiguity compared to in-person settings and can cause misinterpretation or misalignment between intended and perceived meaning. Motivated by communication theories, we designed FaceValue, a technology probe that augments the self-view with private, real-time overlays. These overlays are subtle, suggestive prompts intended to help attendees reflect on how their cues might be interpreted by others. To invite personal interpretation, FaceValue avoids behavioral labeling and instead aims to support meaning-oriented self-awareness: recognizing when visible cues may unintentionally (mis)communicate intent. We deployed FaceValue in the wild with thirteen knowledge workers over multiple weeks, capturing perceived changes in self-awareness and behavior, and impressions on the design concepts, as self-reported by participants through diary entries and exit interviews. Participants felt FaceValue increased their awareness of potentially misaligned cues and motivated in-meeting adjustments, which they believe resulted in improved communication with other attendees. We contribute a conceptual framing that positions visual non-verbal cues as a manipulable communication resource, a technology probe that aims to foster meaning-oriented self-awareness, and empirically-grounded design insights for future meeting systems.

cs.HC

Challenges in Synchronous & Remote Collaboration Around Visualization

We characterize 16 challenges faced by those investigating and developing remote and synchronous collaborative experiences around visualization. Our work reflects the perspectives and prior research efforts of an international group of 29 experts from across human-computer interaction and visualization sub-communities. The challenges are anchored around five collaborative activities that exhibit a centrality of visualization and multimodal communication. These activities include exploratory data analysis, creative ideation, visualization-rich presentations, joint decision making grounded in data, and real-time data monitoring. The challenges also reflect the changing dynamics of these activities in the face of recent advances in extended reality (XR) and artificial intelligence (AI). As an organizing scheme for future research at the intersection of visualization and computer-supported cooperative work, we align the challenges with a sequence of four sets of research and development activities: technological choices, social factors, AI assistance, and evaluation.

cs.HC

Who You Explain To Matters: Learning by Explaining to Conversational Agents with Different Pedagogical Roles

Conversational agents are increasingly used in education for learning support. An application is "learning by explaining", where learners explain their understanding to an agent. However, existing research focuses on single roles, leaving it unclear how different pedagogical roles influence learners' interaction patterns, learning outcomes and experiences. We conducted a between-subjects study (N=96) comparing agents with three pedagogical roles (Tutee, Peer, Challenger) and a control condition while learning an economics concept. We found that different pedagogical roles shaped learning dynamics, including interaction patterns and experiences. Specifically, the Tutee agent elicited the most cognitive investment but led to high pressure. The Peer agent fostered high absorption and interest through collaborative dialogue. The Challenger agent promoted cognitive and metacognitive acts, enhancing critical thinking with moderate pressure. The findings highlight how agent roles shape different learning dynamics, guiding the design of educational agents tailored to specific pedagogical goals and learning phases.

cs.HC

Chameleon: Automated Color Palette Adaptation for Dark Mode Data Visualizations

Dark mode has gained widespread adoption across mobile platforms due to its benefits in reducing eye strain and conserving battery life. However, while the mobile system switches to dark mode, most visualizations remain designed for light mode, causing visual disruptions. Existing methods, such as manual adjustment or color inversion, are either time-consuming or fail to preserve the semantic meaning of colors in visualizations, making them less effective in dark mode. To address this challenge, we propose Chameleon, an algorithm that automatically transforms light mode visualizations into dark mode while maintaining visual clarity and color semantics. By optimizing for luminance contrast, color consistency, and adjacent color differences, Chameleon ensures that the transformed visualizations are legible and visually coherent. Our evaluation includes case study, expert interview, system evaluation, and a user study, and these demonstrate that Chameleon is effective at translating visualizations for dark mode.

cs.HC

Enhancing Deliberativeness: Evaluating the Impact of Multimodal Reflection Nudges

Nudging participants with text-based reflective nudges enhances deliberation quality on online deliberation platforms. The effectiveness of multimodal reflective nudges, however, remains largely unexplored. Given the multi-sensory nature of human perception, incorporating diverse modalities into self-reflection mechanisms has the potential to better support various reflective styles. This paper explores how presenting reflective nudges of different types (direct: persona and indirect: storytelling) in different modalities (text, image, video and audio) affects deliberation quality. We conducted two user studies with 20 and 200 participants respectively. The first study identifies the preferred modality for each type of reflective nudges, revealing that text is most preferred for persona and video is most preferred for storytelling. The second study assesses the impact of these modalities on deliberation quality. Our findings reveal distinct effects associated with each modality, providing valuable insights for developing more inclusive and effective online deliberation platforms.

cs.HC

ImageInThat: Manipulating Images to Convey User Instructions to Robots

Foundation models are rapidly improving the capability of robots in performing everyday tasks autonomously such as meal preparation, yet robots will still need to be instructed by humans due to model performance, the difficulty of capturing user preferences, and the need for user agency. Robots can be instructed using various methods-natural language conveys immediate instructions but can be abstract or ambiguous, whereas end-user programming supports longer horizon tasks but interfaces face difficulties in capturing user intent. In this work, we propose using direct manipulation of images as an alternative paradigm to instruct robots, and introduce a specific instantiation called ImageInThat which allows users to perform direct manipulation on images in a timeline-style interface to generate robot instructions. Through a user study, we demonstrate the efficacy of ImageInThat to instruct robots in kitchen manipulation tasks, comparing it to a text-based natural language instruction method. The results show that participants were faster with ImageInThat and preferred to use it over the text-based method. Supplementary material including code can be found at: https://image-in-that.github.io/.

cs.HC

Multi-Electrode Dielectric Barrier Discharge Actuators: Geometrical Optimization of High Power Density Array

Dielectric barrier discharge (DBD) plasma actuator arrays have been suggested as active flow control devices due to the robust electrohydrodynamic (EHD) force generation in variable atmospheric conditions. DBD plasma augmentation schemes allow for significant performance improvements. However, the transitions to sliding discharge or counter-flow discharge limit their use in high-power arrays. Here, we experimentally demonstrate the performance of a scalable DBD array for two alternating phases of air-exposed electrode configuration. Plasma emissions, direct thrust, velocity profiles, and power consumption measurements of the DBD array reveal that cross-talk between DBD stages can be eliminated to create high-power density actuators. AC augmentation of plasma provides additional gains in thrust; however, the transition to sliding and filamentary discharge reveals geometric limits when increasing the array power density. Introducing a segmented electrode with a resistor delays the onset of adverse sliding and filamentary discharge, allowing it to operate at higher voltage inputs. An optimized four-stage DBD array generated thrust > 250 mN/m with a wall jet thickness > 15 mm, enabling a broader range of flow control applications.

physics.plasm-ph

AC-Augmented Dielectric Barrier Discharge

Dielectric barrier discharge (DBD) plasma actuators generate an electrohydrodynamic (EHD) force through the ionization and acceleration of charged species. Most active flow control DBD applications are only practical at lower Reynolds numbers, and increasing the momentum injection can extend the practical uses of the technology. Here, we experimentally demonstrate improvement in the performance of a planar DBD actuator by utilizing an AC-augmented electrical field in a three-electrode geometry. Time-resolved electrical and optical measurements, velocity profiles, and direct thrust measurements were used to characterize the EHD augmentation. Varying phase shift and E-field strength between the two air-exposed DBD electrodes can accelerate EHD flow and increase EHD forcing by up to ~ 40%. At the most favorable conditions, the maximum thrust was 54 mN/m when the air-exposed electrodes were out of phase. In-phase operation of the exposed electrodes at high E-field conditions can induce adverse effects and sliding discharge. Mechanistically, the performance improvements in the AC-augmented DBD actuator primarily come from the additional charge pull action by the third electrode. The insight into the AC-augmented DBD mechanism allows for developing multi-stage arrays capable of further increasing EHD forces.

physics.plasm-ph

DC-Augmented Dielectric Barrier Discharge (DCA-DBD)

Time-dependent multiphysics interactions that drive the energy transfer in electromechanical systems are poorly understood. We probe dielectric barrier discharge (DBD) with an external DC-augmented (DCA) field to reveal new mechanistic insights. The biased HV DC electrode influences the interaction between the charged ions and the E-field, surface and space charge, and neutral molecules. Direct force measurement, velocity profiles, and time-resolved electrical and optical measurements of discharge characteristics provide evidence of complex plasma/flow interactions. Negative DCA leads to modest improvements in momentum transfer due to the field-augmented ion acceleration before the system transitions to sliding discharge and a counter jet at the DCA electrode, canceling the gains from positive ion acceleration. Positive DCA monotonically increases the wall-parallel force. A new oscillating residual charge interaction mechanism is identified to explain a greater than 2-fold increase in horizontal thrust, in which the acceleration of positive ions is augmented by the attraction from the residual (negative) charge.

physics.plasm-ph

How People Prompt to Create Interactive VR Scenes

Generative AI tools can provide people with the ability to create virtual environments and scenes with natural language prompts. Yet, how people will formulate such prompts is unclear -- particularly when they inhabit the environment that they are designing. For instance, it is likely that a person might say, "Put a chair here", while pointing at a location. If such linguistic features are common to people's prompts, we need to tune models to accommodate them. In this work, we present a wizard-of-oz elicitation study with 22 participants, where we studied people's implicit expectations when verbally prompting such programming agents to create interactive VR scenes. Our findings show that people prompt with several implicit expectations: (1) that agents have an embodied knowledge of the environment; (2) that agents understand embodied prompts by users; (3) that the agents can recall previous states of the scene and the conversation, and that (4) agents have a commonsense understanding of objects in the scene. Further, we found that participants prompt differently when they are prompting in situ (i.e. within the VR environment) versus ex situ (i.e. viewing the VR environment from the outside). To explore how our could be applied, we designed and built Oastaad, a conversational programming agent that allows non-programmers to design interactive VR experiences that they inhabit. Based on these explorations, we outline new opportunities and challenges for conversational programming agents that create VR environments.

cs.HC

Dielectric Barrier Discharge Actuators: Experimental and Numerical Study of Momentum Injection into Co-flow and Counter-flow Freestream

Dielectric barrier discharge (DBD) plasma actuators can generate a wall jet without moving parts by interacting with ionized and neutral molecules in an electric field. The coupling between electrohydrodynamic (EHD), turbulence, inertial and viscous effects in the flow boundary layer remains poorly understood and requires investigation. We present an experimental investigation of momentum injection by DBD actuators into the free stream flow with Re = 35,000 and 75,000 in co-flow and counter-flow scenarios over a range of VAC = 12 kV - 19.5 kV peak-to-peak at a frequency of 2 kHz. In the co-flow configuration, the DBD actuator injects momentum into the boundary layer. In co-flow, the momentum injection results in the thinning boundary layer, while in the counter-flow configuration, flow separation can occur. For the tested condition, a separation bubble is observed at Re = 35,000. The momentum displacement in the counter-flow configuration is six times greater than the EHD jet momentum in a quiescent environment. Both co-flow and counter-flow momentum injections show diminishing effects with increasing external velocities. This work highlights that the resulting flow pattern is not a simple superposition of the EHD jet and the free stream but is determined by the coupling of inertial, viscous, and Coulombic effects in the EHD-driven wall jet and the external flow. The velocity profiles and momentum measurements presented here can be used to validate numerical models and inform the design of DBD actuators for active flow control.

physics.plasm-ph

Stargazer: An Interactive Camera Robot for Capturing How-To Videos Based on Subtle Instructor Cues

Live and pre-recorded video tutorials are an effective means for teaching physical skills such as cooking or prototyping electronics. A dedicated cameraperson following an instructor's activities can improve production quality. However, instructors who do not have access to a cameraperson's help often have to work within the constraints of static cameras. We present Stargazer, a novel approach for assisting with tutorial content creation with a camera robot that autonomously tracks regions of interest based on instructor actions to capture dynamic shots. Instructors can adjust the camera behaviors of Stargazer with subtle cues, including gestures and speech, allowing them to fluidly integrate camera control commands into instructional activities. Our user study with six instructors, each teaching a distinct skill, showed that participants could create dynamic tutorial videos with a diverse range of subjects, camera framing, and camera angle combinations using Stargazer.

cs.HC

Momentum Injection via Dielectric Barrier Discharge Actuators in Low-Speed External Flow

Dielectric barrier discharge (DBD) plasma actuators can generate a wall jet without moving parts through interaction between ionized and neutral molecules in an electric field. The coupling between electro-hydrodynamic, turbulence, and viscous effects in the flow boundary layer remains unclear and deserves careful investigation. We present an experimental investigation of momentum injection by DBD actuators in a U_external = 5 m/s and U_external = 11 m/s co-flow and counter-flow configuration over a range of VAC = 12 kV - 19.5 kV peak-to-peak at a frequency of 2 kHz. In the co-flow configuration, the DBD actuator adds momentum to the boundary layer, similar to an electrohydrodynamic (EHD) jet in quiescent conditions. In the counter-flow configuration, flow separation is observed at free stream velocity U_external = 5 m/s. The momentum displacement in the counter-flow configuration is ~ 6x greater than EHD jet momentum in a quiescent environment. Both co-flow and counter-flow momentum injections show diminishing effects with increased external flow speed. This work highlights that the resulting flow pattern is not a simple superposition of the EHD jet and the free stream but is determined by a balance between the inertial, viscous and Coulombic forces of the EHD and the external flow. The velocity profiles and momentum characteristics can be used to validate numerical models and inform the design of DBD actuators for active flow control.

physics.plasm-ph

"Grip-that-there": An Investigation of Explicit and Implicit Task Allocation Techniques for Human-Robot Collaboration

In ad-hoc human-robot collaboration (HRC), humans and robots work on a task without pre-planning the robot's actions prior to execution; instead, task allocation occurs in real-time. However, prior research has largely focused on task allocations that are pre-planned - there has not been a comprehensive exploration or evaluation of techniques where task allocation is adjusted in real-time. Inspired by HCI research on territoriality and proxemics, we propose a design space of novel task allocation techniques including both explicit techniques, where the user maintains agency, and implicit techniques, where the efficiency of automation can be leveraged. The techniques were implemented and evaluated using a tabletop HRC simulation in VR. A 16-participant study, which presented variations of a collaborative block stacking task, showed that implicit techniques enable efficient task completion and task parallelization, and should be augmented with explicit mechanisms to provide users with fine-grained control.

cs.RO

Empirical Model for Discharge Current and Momentum Injection in Dielectric Barrier Discharge

Dielectric Barrier Discharge (DBD) plasma actuators with an asymmetric, straight edge electrode configuration generate a wall-bounded jet without moving parts. Mechanistic description of the interaction between the Coulombic forces and fluid motion as a function of DBD parameters remains unclear. This paper presents an experimental investigation of DBD actuator, including electrical current associated with microdischarges, plasma volume, and the wall jet momentum over a range of AC frequencies (0.5 - 2 kHz) and peak-to-peak voltages up to 19.5 kV. Discharge current is measured with a high temporal resolution, and plasma volume is characterized optically, and the momentum induced by the DBD wall jet is computed based on the axial velocities measured downstream of the actuator using a custom-built pitot tube. Discharge current analysis demonstrated asymmetry between the positive and negative semi-cycle; both currents yielded a power-law relationship with empirical fitting coefficients. Plasma length varies linearly and volume quadratically with voltage. Although plasma length reached an asymptotic value at a higher frequency, the plasma volume grows due to the increasing height of the ionization region. In a simple 2D configuration, the DBD wall jet momentum shows near-linear dependency with discharge current in the range of voltages and frequencies considered in this work. The presented empirical model characterizes the DBD wall jet momentum and the discharge current based only on the AC inputs. With the estimation of plasma volume, the model can be applied for determining more realistic boundary conditions in numerical simulations.

physics.plasm-ph

Activity River: Visualizing Planned and Logged Personal Activities for Reflection

We present Activity River, a personal visualization tool which enables individuals to plan, log, and reflect on their self-defined activities. We are interested in supporting this type of reflective practice as prior work has shown that reflection can help people plan and manage their time effectively. Hence, we designed Activity River based on five design goals (visualize historical and contextual data, facilitate comparison of goals and achievements, engage viewers with delightful visuals, support authorship, and enable flexible planning and logging) which we distilled from the Information Visualization and Human-Computer Interaction literature. To explore our approach's strengths and limitations, we conducted a qualitative study of Activity River using a role-playing method. Through this qualitative exploration, we illustrate how our participants envisioned using our visualization to perform dynamic and continuous reflection on their activities. We observed that they were able to assess their progress towards their plans and adapt to unforeseen circumstances using our tool.

cs.HC