arXiv subjects

Ankit Goyal

Publications and source records attributed to Ankit Goyal.

At least 19 recordsLinked to original sources

arXiv2026

Does Your Agent's Memory Survive a Model Upgrade? A Controlled Study of Memory Portability

Model upgrades are routine; memory migrations are not. An agent can keep the same memory store and still forget: a new model may interpret old notes differently, mixed embedding versions may break retrieval, and repair may fail without the original evidence. We compare memory as the same history is preserved verbatim for long-context reading (LC-RAW), divided into chunks for retrieval-augmented generation (RAG), compressed by a model into natural-language notes (NOTES), or normalized into a fixed-schema knowledge graph (KG-fixed). The study uses 48 synthetic histories with randomized answer codes, exact scoring, and two open-weight models with sub 10 billion parameters. Our measurements show that fixed-schema structures transfer reliably, with KG-fixed accuracy changing by only $+0.0004 \pm 0.0020$ following a writer swap. Conversely, compressed NOTES exhibit high model coupling, with accuracy shifting asymmetrically by $+9.91$ or $-13.28$ percentage points depending on the specific migration direction. In RAG systems, partial embedding migrations using a 50/50 mixed index capture only a 4.96-point accuracy improvement, forfeiting the majority of the 11.90-point gain achieved through full re-embedding. Diagnostic decomposition attributes 80% ($0.467 \pm 0.014$) of the NOTES accuracy deficit to information lost during initial construction, whereas retrieval failures drive 81% ($0.364 \pm 0.012$) of the RAG deficit. Finally, store-only repair of NOTES fails to reach a 90% performance recovery target in all 48 test cases, whereas retaining the raw source history enables successful recovery in 34 of 48 cases for one tested direction. These findings highlight the necessity of direction-specific migration testing, strict embedding space isolation, and the retention of source histories for memory repair.

cs.AI↗

arXiv2026

Mind the Cap: Output-Budget Regimes Change the Measured Multilingual Reasoning Gap

Multilingual evaluations report accuracy at a single output-token cap, but languages need different numbers of tokens to express the same content, so the cap is a hidden experimental variable. We test whether the native-vs-translate gap on MGSM (German, Thai, Swahili) is a token-budget artifact for Qwen3-8B and Llama-3.1-8B-Instruct under four prompting strategies. The measured gap swings by up to 57 points across budgets, length normalization moves it by up to 38.9 points where the cap binds, and at tight caps normalization can reverse which strategy scores higher. We prospectively froze the sweep's three Qwen peaks and its near-zero value at 1024 and evaluated them on 540,000 independently hard-capped decodes: a second frozen family of six Holm-corrected tests rejects every null. The frozen test at $B^*=1024$ still fails to reject because native accuracy has already saturated there; above saturation, the residual difference is a strategy-performance gap, not an identified reasoning deficit. The same truncation channel prices a cost-ordered adaptation ladder: a cross-fitted Thai vocabulary extension closes 0.0 points of the gap at the frozen budget and 4.9 points where 19% of traces still truncate. A third frozen family varies only the announced budget at a fixed enforced cap; announcing 128 rather than 2048 tokens moves Thai native accuracy by 5.1 points, so accuracy is not a function of the enforced cap alone. A correct-emission timing identity computed from one long-cap run matches the three pre-specified MGSM peaks to 0.65 points and, in an exploratory Qwen-only analysis of three further benchmarks, tracks held-out items to 0.92 points, locating the peak exactly in five of seven cells. Treat the output cap as an independent variable and report accuracy across the budget regime, not at a single budget.

cs.CL↗

arXiv2026

From Agent Failures to Text Policies: What Works and What Breaks

TextGrad improves language-model systems by revising text from feedback. Its core thesis is that natural-language feedback can act as a gradient for optimizing text components without changing model weights. Applying it to agents is harder because feedback arrives only after a sequence of actions, making it difficult to identify which decision caused failure. We study this problem by separating the ability to follow a useful policy from the ability to learn that policy from experience. Our main finding is a clear gap between these two abilities. Human-written policies improve two frozen 7B agents on TextWorldExpress by 5.0 success points, showing that useful policy text exists. However, policies generated from agent trajectories do not reliably outperform fixed prompting, even with richer traces, counterfactual evidence, or iterative GEPA search. The main challenge for agent-level TextGrad is therefore not executing textual policy updates, but reliably generating and selecting them from experience.

cs.CL↗

arXiv2026

Structured Feedback Improves Repair in an LLM Agent Loop

LLM agents often retry after external validation rejects a candidate, but the interface between validation and the next model call remains underspecified. We introduce VeriHarness, a code-controlled agent loop in which models generate candidates while external validators control acceptance, budgets, and traces. We use it to compare raw diagnostics with feedback that identifies the failure location, observed value, and admissible alternatives. Across 50 paired TextWorld games under a four-call cap, feedback containing all three fields raises terminal success from 14/50 to 36/50 for Qwen2.5-Coder-14B (+44 percentage points) and from 8/50 to 29/50 for Llama-3.1-8B (+42 points). Ablations locate most of the gain in the admissible alternatives: feedback containing only the location and observed value remains near the raw diagnostic baseline. Presenting the complete repair information in prose instead of a keyed JSON record yields nearly the same success, providing no evidence that JSON syntax itself improves repair. The ordering persists across the tested call budgets and one sampled-decoding setting.

cs.SE↗

arXiv2026

RoboLab: A High-Fidelity Simulation Benchmark for Analysis of Task Generalist Policies

The pursuit of general-purpose robotics has yielded impressive foundation models, yet simulation-based benchmarking remains a bottleneck due to rapid performance saturation and a lack of true generalization testing. Existing benchmarks often exhibit significant domain overlap between training and evaluation, trivializing success rates and obscuring insights into robustness. We introduce RoboLab, a simulation benchmarking framework designed to address these challenges. Concretely, our framework is designed to answer two questions: (1) to what extent can we understand the performance of a real-world policy by analyzing its behavior in simulation, and (2) which factor most strongly affect policy behavior. First, RoboLab enables human-authored and LLM-enabled generation of scenes and tasks in a robot- and policy-agnostic manner within a high-fidelity simulation environment. We introduce an accompanying RoboLab-120 benchmark, consisting of 120 tasks categorized into three competency axes: visual, procedural, relational, across three difficulty levels. Second, we introduce a systematic analysis of real-world policies that quantify both their performance and the sensitivity of their behavior to controlled perturbations, exposing significant performance gap in current state-of-the-art models. By providing granular metrics and a scalable toolset, RoboLab offers a scalable framework for evaluating the true generalization capabilities of task-generalist robotic policies. Project website: https://research.nvidia.com/labs/srl/projects/robolab/.

cs.RO↗

arXiv2025

VLA-0: Building State-of-the-Art VLAs with Zero Modification

Vision-Language-Action models (VLAs) hold immense promise for enabling generalist robot manipulation. However, the best way to build them remains an open question. Current approaches often add complexity, such as modifying the existing vocabulary of a Vision-Language Model (VLM) with action tokens or introducing special action heads. Curiously, the simplest strategy of representing actions directly as text has remained largely unexplored. This work introduces VLA-0 to investigate this idea. We find that VLA-0 is not only effective; it is surprisingly powerful. With the right design, VLA-0 outperforms more involved models. On LIBERO, a popular benchmark for evaluating VLAs, VLA-0 outperforms all existing methods trained on the same robotic data, including $\pi_0.5$-KI, OpenVLA-OFT and SmolVLA. Furthermore, without large-scale robotics-specific training, it outperforms methods trained on large-scale robotic data, like $\pi_0.5$-KI, $\pi_0$, GR00T-N1 and MolmoAct. These findings also translate to the real world, where VLA-0 outperforms SmolVLA, a VLA model pre-trained on large-scale real data. This paper summarizes our unexpected findings and spells out the specific techniques required to unlock the high performance of this simple yet potent VLA design. Visual results, code, and trained models are provided here: https://vla0.github.io/.

cs.RO↗

arXiv2025

ManiFlow: A General Robot Manipulation Policy via Consistency Flow Training

This paper introduces ManiFlow, a visuomotor imitation learning policy for general robot manipulation that generates precise, high-dimensional actions conditioned on diverse visual, language and proprioceptive inputs. We leverage flow matching with consistency training to enable high-quality dexterous action generation in just 1-2 inference steps. To handle diverse input modalities efficiently, we propose DiT-X, a diffusion transformer architecture with adaptive cross-attention and AdaLN-Zero conditioning that enables fine-grained feature interactions between action tokens and multi-modal observations. ManiFlow demonstrates consistent improvements across diverse simulation benchmarks and nearly doubles success rates on real-world tasks across single-arm, bimanual, and humanoid robot setups with increasing dexterity. The extensive evaluation further demonstrates the strong robustness and generalizability of ManiFlow to novel objects and background changes, and highlights its strong scaling capability with larger-scale datasets. Our website: maniflow-policy.github.io.

cs.RO↗

arXiv2025

OG-VLA: Orthographic Image Generation for 3D-Aware Vision-Language Action Model

We introduce OG-VLA, a novel architecture and learning framework that combines the generalization strengths of Vision Language Action models (VLAs) with the robustness of 3D-aware policies. We address the challenge of mapping natural language instructions and one or more RGBD observations to quasi-static robot actions. 3D-aware robot policies achieve state-of-the-art performance on precise robot manipulation tasks, but struggle with generalization to unseen instructions, scenes, and objects. On the other hand, VLAs excel at generalizing across instructions and scenes, but can be sensitive to camera and robot pose variations. We leverage prior knowledge embedded in language and vision foundation models to improve generalization of 3D-aware keyframe policies. OG-VLA unprojects input observations from diverse views into a point cloud which is then rendered from canonical orthographic views, ensuring input view invariance and consistency between input and output spaces. These canonical views are processed with a vision backbone, a Large Language Model (LLM), and an image diffusion model to generate images that encode the next position and orientation of the end-effector on the input scene. Evaluations on the Arnold and Colosseum benchmarks demonstrate state-of-the-art generalization to unseen environments, with over 40% relative improvements while maintaining robust performance in seen settings. We also show real-world adaption in 3 to 5 demonstrations along with strong generalization. Videos and resources at https://og-vla.github.io/

cs.RO↗

arXiv2025

HAMSTER: Hierarchical Action Models For Open-World Robot Manipulation

Large foundation models have shown strong open-world generalization to complex problems in vision and language, but similar levels of generalization have yet to be achieved in robotics. One fundamental challenge is the lack of robotic data, which are typically obtained through expensive on-robot operation. A promising remedy is to leverage cheaper, off-domain data such as action-free videos, hand-drawn sketches or simulation data. In this work, we posit that hierarchical vision-language-action (VLA) models can be more effective in utilizing off-domain data than standard monolithic VLA models that directly finetune vision-language models (VLMs) to predict actions. In particular, we study a class of hierarchical VLA models, where the high-level VLM is finetuned to produce a coarse 2D path indicating the desired robot end-effector trajectory given an RGB image and a task description. The intermediate 2D path prediction is then served as guidance to the low-level, 3D-aware control policy capable of precise manipulation. Doing so alleviates the high-level VLM from fine-grained action prediction, while reducing the low-level policy's burden on complex task-level reasoning. We show that, with the hierarchical design, the high-level VLM can transfer across significant domain gaps between the off-domain finetuning data and real-robot testing scenarios, including differences on embodiments, dynamics, visual appearances and task semantics, etc. In the real-robot experiments, we observe an average of 20% improvement in success rate across seven different axes of generalization over OpenVLA, representing a 50% relative gain. Visual results, code, and dataset are provided at: https://hamster-robot.github.io/

cs.RO↗

arXiv2024

Differentiable GPU-Parallelized Task and Motion Planning

Planning long-horizon robot manipulation requires making discrete decisions about which objects to interact with and continuous decisions about how to interact with them. A robot planner must select grasps, placements, and motions that are feasible and safe. This class of problems falls under Task and Motion Planning (TAMP) and poses significant computational challenges in terms of algorithm runtime and solution quality, particularly when the solution space is highly constrained. To address these challenges, we propose a new bilevel TAMP algorithm that leverages GPU parallelism to efficiently explore thousands of candidate continuous solutions simultaneously. Our approach uses GPU parallelism to sample an initial batch of solution seeds for a plan skeleton and to apply differentiable optimization on this batch to satisfy plan constraints and minimize solution cost with respect to soft objectives. We demonstrate that our algorithm can effectively solve highly constrained problems with non-convex constraints in just seconds, substantially outperforming serial TAMP approaches, and validate our approach on multiple real-world robots. Project website and code: https://cutamp.github.io

cs.RO↗

arXiv2024

Discovering Robotic Interaction Modes with Discrete Representation Learning

Human actions manipulating articulated objects, such as opening and closing a drawer, can be categorized into multiple modalities we define as interaction modes. Traditional robot learning approaches lack discrete representations of these modes, which are crucial for empirical sampling and grounding. In this paper, we present ActAIM2, which learns a discrete representation of robot manipulation interaction modes in a purely unsupervised fashion, without the use of expert labels or simulator-based privileged information. Utilizing novel data collection methods involving simulator rollouts, ActAIM2 consists of an interaction mode selector and a low-level action predictor. The selector generates discrete representations of potential interaction modes with self-supervision, while the predictor outputs corresponding action trajectories. Our method is validated through its success rate in manipulating articulated objects and its robustness in sampling meaningful actions from the discrete representation. Extensive experiments demonstrate ActAIM2's effectiveness in enhancing manipulability and generalizability over baselines and ablation studies. For videos and additional results, see our website: https://actaim2.github.io/.

cs.RO↗

arXiv2024

3D-MVP: 3D Multiview Pretraining for Robotic Manipulation

Recent works have shown that visual pretraining on egocentric datasets using masked autoencoders (MAE) can improve generalization for downstream robotics tasks. However, these approaches pretrain only on 2D images, while many robotics applications require 3D scene understanding. In this work, we propose 3D-MVP, a novel approach for 3D Multi-View Pretraining using masked autoencoders. We leverage Robotic View Transformer (RVT), which uses a multi-view transformer to understand the 3D scene and predict gripper pose actions. We split RVT's multi-view transformer into visual encoder and action decoder, and pretrain its visual encoder using masked autoencoding on large-scale 3D datasets such as Objaverse. We evaluate 3D-MVP on a suite of virtual robot manipulation tasks and demonstrate improved performance over baselines. Our results suggest that 3D-aware pretraining is a promising approach to improve generalization of vision-based robotic manipulation policies. Project site: https://jasonqsy.github.io/3DMVP

cs.RO↗

arXiv2024

RVT-2: Learning Precise Manipulation from Few Demonstrations

In this work, we study how to build a robotic system that can solve multiple 3D manipulation tasks given language instructions. To be useful in industrial and household domains, such a system should be capable of learning new tasks with few demonstrations and solving them precisely. Prior works, like PerAct and RVT, have studied this problem, however, they often struggle with tasks requiring high precision. We study how to make them more effective, precise, and fast. Using a combination of architectural and system-level improvements, we propose RVT-2, a multitask 3D manipulation model that is 6X faster in training and 2X faster in inference than its predecessor RVT. RVT-2 achieves a new state-of-the-art on RLBench, improving the success rate from 65% to 82%. RVT-2 is also effective in the real world, where it can learn tasks requiring high precision, like picking up and inserting plugs, with just 10 demonstrations. Visual results, code, and trained model are provided at: https://robotic-view-transformer-2.github.io/.

cs.RO↗

arXiv2024

AdaDemo: Data-Efficient Demonstration Expansion for Generalist Robotic Agent

Encouraged by the remarkable achievements of language and vision foundation models, developing generalist robotic agents through imitation learning, using large demonstration datasets, has become a prominent area of interest in robot learning. The efficacy of imitation learning is heavily reliant on the quantity and quality of the demonstration datasets. In this study, we aim to scale up demonstrations in a data-efficient way to facilitate the learning of generalist robotic agents. We introduce AdaDemo (Adaptive Online Demonstration Expansion), a general framework designed to improve multi-task policy learning by actively and continually expanding the demonstration dataset. AdaDemo strategically collects new demonstrations to address the identified weakness in the existing policy, ensuring data efficiency is maximized. Through a comprehensive evaluation on a total of 22 tasks across two robotic manipulation benchmarks (RLBench and Adroit), we demonstrate AdaDemo's capability to progressively improve policy performance by guiding the generation of high-quality demonstration datasets in a data-efficient manner.

cs.RO↗

arXiv2023

Shelving, Stacking, Hanging: Relational Pose Diffusion for Multi-modal Rearrangement

We propose a system for rearranging objects in a scene to achieve a desired object-scene placing relationship, such as a book inserted in an open slot of a bookshelf. The pipeline generalizes to novel geometries, poses, and layouts of both scenes and objects, and is trained from demonstrations to operate directly on 3D point clouds. Our system overcomes challenges associated with the existence of many geometrically-similar rearrangement solutions for a given scene. By leveraging an iterative pose de-noising training procedure, we can fit multi-modal demonstration data and produce multi-modal outputs while remaining precise and accurate. We also show the advantages of conditioning on relevant local geometric features while ignoring irrelevant global structure that harms both generalization and precision. We demonstrate our approach on three distinct rearrangement tasks that require handling multi-modality and generalization over object shape and pose in both simulation and the real world. Project website, code, and videos: https://anthonysimeonov.github.io/rpdiff-multi-modal/

cs.RO↗

arXiv2023

RVT: Robotic View Transformer for 3D Object Manipulation

For 3D object manipulation, methods that build an explicit 3D representation perform better than those relying only on camera images. But using explicit 3D representations like voxels comes at large computing cost, adversely affecting scalability. In this work, we propose RVT, a multi-view transformer for 3D manipulation that is both scalable and accurate. Some key features of RVT are an attention mechanism to aggregate information across views and re-rendering of the camera input from virtual views around the robot workspace. In simulations, we find that a single RVT model works well across 18 RLBench tasks with 249 task variations, achieving 26% higher relative success than the existing state-of-the-art method (PerAct). It also trains 36X faster than PerAct for achieving the same performance and achieves 2.3X the inference speed of PerAct. Further, RVT can perform a variety of manipulation tasks in the real world with just a few ($\sim$10) demonstrations per task. Visual results, code, and trained model are provided at https://robotic-view-transformer.github.io/.

cs.RO↗

arXiv2023

Infinite Photorealistic Worlds using Procedural Generation

We introduce Infinigen, a procedural generator of photorealistic 3D scenes of the natural world. Infinigen is entirely procedural: every asset, from shape to texture, is generated from scratch via randomized mathematical rules, using no external source and allowing infinite variation and composition. Infinigen offers broad coverage of objects and scenes in the natural world including plants, animals, terrains, and natural phenomena such as fire, cloud, rain, and snow. Infinigen can be used to generate unlimited, diverse training data for a wide range of computer vision tasks including object detection, semantic segmentation, optical flow, and 3D reconstruction. We expect Infinigen to be a useful resource for computer vision research and beyond. Please visit https://infinigen.org for videos, code and pre-generated data.

cs.CV↗

arXiv2022

ProgPrompt: Generating Situated Robot Task Plans using Large Language Models

Task planning can require defining myriad domain knowledge about the world in which a robot needs to act. To ameliorate that effort, large language models (LLMs) can be used to score potential next actions during task planning, and even generate action sequences directly, given an instruction in natural language with no additional domain information. However, such methods either require enumerating all possible next steps for scoring, or generate free-form text that may contain actions not possible on a given robot in its current context. We present a programmatic LLM prompt structure that enables plan generation functional across situated environments, robot capabilities, and tasks. Our key insight is to prompt the LLM with program-like specifications of the available actions and objects in an environment, as well as with example programs that can be executed. We make concrete recommendations about prompt structure and generation constraints through ablation experiments, demonstrate state of the art success rates in VirtualHome household tasks, and deploy our method on a physical robot arm for tabletop tasks. Website at progprompt.github.io

cs.RO↗