arXiv subjects

Angelo Cacciuto

Publications and source records attributed to Angelo Cacciuto.

At least 19 recordsLinked to original sources

arXiv2026

How Phase Coexistence affects the mechanical properties of heterogeneous 2D suspensions

Although numerical simulations of rheological measurements typically focus on homogeneous systems, heterogeneity can profoundly impact material properties. We report on the rheological properties of a suspension of two-dimensional Lennard-Jones particles across the gas/liquid and the gas/solid coexistence lines of the system. We show how the presence of multiple coexisting states has a significant impact on the mechanical properties of these systems when compared with their homogeneous reference counterparts. Our results establish an extended map to navigate a landscape where not only density and temperature, but also phase coexistence, dictate the transition from viscous to elastic-dominated behavior under shear. These results provides a benchmark for future research into heterogeneous fluids where the coexistence of complex dynamic states is frequently observed.

cond-mat.soft↗

arXiv2025

MIPS is a Maxwell fluid with an extended and non-monotonic crossover

Understanding the mechanical properties of active suspensions is crucial for their potential applications in materials engineering. Among the various phenomena in active matter that have no analogue in equilibrium systems, motility-induced phase separation (MIPS) in active colloidal suspensions is one of the most extensively studied. However, the mechanical properties of this fundamental active state of matter remain poorly understood. This study investigates the rheology of a suspension of active colloidal particles under constant and oscillatory shear. Systems consisting of pseudo-hard active Brownian particles exhibiting co-existence of dense and dilute phases behave as a viscoelastic Maxwell fluid at low and high frequencies, displaying exclusively shear thinning across a wide range of densities and activities. Remarkably, the cross-over point between the storage and loss moduli is non-monotonic, rising with activity before the MIPS transition but falling with activity after the transition, revealing the subtleties of how active forces and intrinsically out-of-equilibrium phases affect the mechanical properties of these systems.

cond-mat.soft↗

arXiv2022

Designing active colloidal folders

Can active forces be exploited to drive the consistent collapse of an active polymer into a folded structure? In this paper we introduce and perform numerical simulations of a simple model of active colloidal folders, and show that a judicious inclusion of active forces into a stiff colloidal chain can generate designable and reconfigurable two dimensional folded structures. The key feature is to organize the forces perpendicular to the chain backbone according to specific patterns (sequences). We characterize the physical properties of this model and perform, using a number of numerical techniques, an in-depth statistical analysis of structure and dynamics of the emerging conformations. We discovered a number of interesting features, including the existence of a direct correspondence between the sequence of the active forces and the structure of folded conformations, and we discover the existence of an ensemble of highly mobile compact structures capable of moving from conformation to conformation. Finally, akin to protein design problems, we discuss a method that is capable of designing specific target folds by sampling over sequences of active forces.

cond-mat.soft↗

arXiv2019

Activity-Enhanced Self-Assembly of a Colloidal Kagome Lattice

Here, we describe a method for the enhanced self-assembly of triblock Janus colloids targeted to form a kagome lattice. Using computer simulations, we demonstrate that the formation of this elusive structure can be significantly improved by self-propelling or activating the colloids along the axis connecting their hydrophobic hemispheres. The process by which metastable aggregates are destabilized and transformed into the favored kagome lattice is quite general, and we argue this active approach provides a systematic pathway to improving the self-assembly of a large number of colloidal structures.

cond-mat.soft↗

arXiv2015

Microphase separation in two dimensional suspensions of self-propelled spheres and dumbbells

We use numerical simulations to study the phase behavior of self-propelled spherical and dumbbellar particles interacting via micro-phase separation inducing potentials. Our results indicate that under the appropriate conditions, it is possible to drive the formation of two new active states; a spinning cluster crystal, i.e. an ordered mesoscopic phase having finite size spinning crystallites as lattice sites, and a fluid of living clusters, i.e. a two dimensional fluid where each "particle" is a finite size living cluster. We discuss the dynamics of these phases and suggest ways of extending their stability under a wide range of active forces.

cond-mat.soft↗

arXiv2014

Activity induced collapse and re-expansion of rigid polymers

We study the elastic properties of a rigid filament in a bath of self-propelled particles. We find that while fully flexible filaments swell monotonically upon increasing the strength of the propelling force, rigid filaments soften for moderate activities, collapse into metastable hairpins for intermediate strengths, and eventually re-expand when the strength of the activity of the surrounding fluid is large. This collapse and re-expansion of the filament with the bath activity is reminiscent of the behavior observed in polyelectrolytes in the presence of different concentrations of multivalent salt.

cond-mat.soft↗

arXiv2012

Mechanism of membrane tube formation induced by adhesive nanocomponents

We report numerical simulations of membrane tubulation driven by large colloidal particles. Using Monte Carlo simulations we study how the process depends on particle size, concentration and binding strength, and present accurate free energy calculations to sort out how tube formation compares with the competing budding process. We find that tube formation is a result of the collective behavior of the particles adhering on the surface, and it occurs for binding strengths that are smaller than those required for budding. We also find that long linear aggregates of particles forming on the membrane surface act as nucleation seeds for tubulation by lowering the free energy barrier associated to the process.

cond-mat.soft↗

arXiv2011

Fluid membranes can drive linear aggregation of adsorbed spherical nanoparticles

Using computer simulations we show that lipid membranes can mediate linear aggregation of spherical nanoparticles binding to it for a wide range of biologically relevant bending rigidities. This result is in net contrast with the isotropic aggregation of nanoparticles on fluid interfaces or the expected clustering of isotropic insertions in biological membranes. We present a phase diagram indicating where linear aggregation is expected, and compute explicitly the free energy barriers associated with linear and isotropic aggregation. Finally, we provide simple scaling arguments to explain this phenomenology.

cond-mat.soft↗

arXiv2011

Free energy of alternating two-component polymer brushes on cylindrical templates

We use computer simulations to investigate the stability of a two-component polymer brush de-mixing on a curved template into phases of different morphological properties. It has been previously shown via molecular dynamics simulations that immiscible chains having different length and anchored to a cylindrical template will phase separate into striped phases of different widths oriented perpendicularly to the cylindrical axis. We calculate free energy differences for a variety of stripe widths, and extract simple relationships between the sizes of the two polymers, N_1 and N_2, and the free energy dependence on the stripe width. We explain these relationships using simple physical arguments based upon previous theoretical work on the free energy of polymer brushes.

cond-mat.soft↗

arXiv2011

Free Energy of Multiple Overlapping Chains

How accurate is pair additivity in describing interactions between soft polymer-based nanoparticles? Using numerical simulations we compute the free energy cost required to overlap multiple chains in the same region of space, and provide a quantitative measure of the effectiveness of pair additivity as a function of chain number and length. Our data suggest that pair additivity can indeed become quite inadequate as the chain density in the overlapping region increases. We also show that even a scaling theory based on polymer confinement can only partially account for the complexity of the problem. In fact, we unveil and characterize an isotropic to star-polymer cross-over taking place for large number of chains, and propose a revised scaling theory that better captures the physics of the problem.

cond-mat.soft↗

arXiv2011

Soft elastic surfaces as a platform for particle self-assembly

We perform numerical simulations to study self-assembly of nanoparticles mediated by an elastic planar surface. We show how the nontrivial elastic response to deformations of these surfaces leads to anisotropic interactions between the particles resulting in aggregates having different geometrical features. The morphology of the patterns can be controlled by the mechanical properties of the surface and the strength of the particle adhesion. We use simple scaling arguments to understand the formation of the different structures, and we show how the adhering particles can cause the underlying elastic substrate to wrinkle if two of its opposite edges are clamped. Finally, we discuss the implications of our results and suggest how elastic surfaces could be used in nanofabrication.

cond-mat.soft↗

arXiv2011

Two-Dimensional Packing of Soft Particles and the Soft Generalized Thomson Problem

We perform numerical simulations of purely repulsive soft colloidal particles interacting via a generalized elastic potential and constrained to a two-dimensional plane and to the surface of a spherical shell. For the planar case, we compute the phase diagram in terms of the system's rescaled density and temperature. We find that a large number of ordered phases becomes accessible at low temperatures as the density of the system increases, and we study systematically how structural variety depends on the functional shape of the pair potential. For the spherical case, we revisit the generalized Thomson problem for small numbers of particles N <= 12 and identify, enumerate and compare the minimal energy polyhedra established by the location of the particles to those of the corresponding electrostatic system.

cond-mat.soft↗

arXiv2011

Reshaping elastic nanotubes via self-assembly of surface-adhesive nanoparticles

Elastic sheets with macroscopic dimensions are easy to deform by bending and stretching. Yet shaping nanometric sheets by mechanical manipulation is hard. Here we show that nanoparticle self-assembly could be used to this end. We demonstrate by Monte Carlo simulation that spherical nanoparticles adhering to the outer surface of an elastic nanotube can self-assemble into linear structures as a result of curvature-mediated interactions. We find that nanoparticles arrange into rings or helices on stretchable nanotubes, and as axial strings on nanotubes with high rigidity to stretching. These self-assembled structures are inextricably linked to a variety of deformed nanotube profiles, which can be controlled by tuning the concentration of nanoparticles, the nanoparticle-nanotube diameter ratio and the elastic properties of the nanotube. Our results open the possibility of designing nanoparticle-laden tubular nanostructures with tailored shapes, for potential applications in materials science and nanomedicine.

cond-mat.soft↗

arXiv2010

Exploiting classical nucleation theory for reverse self-assembly

In this paper we introduce a new method to design interparticle interactions to target arbitrary crystal structures via the process of self-assembly. We show that it is possible to exploit the curvature of the crystal nucleation free-energy barrier to sample and select optimal interparticle interactions for self-assembly into a desired structure. We apply this method to find interactions to target two simple crystal structures: a crystal with simple cubic symmetry and a two-dimensional plane with square symmetry embedded in a three-dimensional space. Finally, we discuss the potential and limits of our method and propose a general model by which a functionally infinite number of different interaction geometries may be constructed and to which our reverse self-assembly method could in principle be applied.

cond-mat.soft↗

arXiv2010

Packing of soft asymmetric dumbbells

We use numerical simulations to study the phase behavior of a system of purely repulsive soft dumbbells as a function of size ratio of the two components and their relative degree of deformability. We find a plethora of different phases which includes most of the mesophases observed in self-assembly of block copolymers, but also crystalline structures formed by asymmetric, hard binary mixtures. Our results detail the phenomenological behavior of these systems when softness is introduced in terms of two different classes of inter-particle interactions: (a) the elastic Hertz potential, that has a finite energy cost for complete overlap of any two components, and (b) a generic power-law repulsion with tunable exponent. We discuss how simple geometric arguments can be used to account for the large structural variety observed in these systems, and detail the similarities and differences in the phase behavior for the two classes of potentials under consideration.

cond-mat.soft↗

arXiv2010

Particle self-assembly on soft elastic shells

We use numerical simulations to show how noninteracting hard particles binding to a deformable elastic shell may self-assemble into a variety of linear patterns. This is a result of the nontrivial elastic response to deformations of shells. The morphology of the patterns can be controlled by the mechanical properties of the surface, and can be fine-tuned by varying the binding energy of the particles. We also repeat our calculations for a fully flexible chain and find that the chain conformations follow patterns similar to those formed by the nanoparticles under analogous conditions. We propose a simple way of understanding and sorting the different structures and relate it to the underlying shape transition of the shell. Finally, we discuss the implications of our results.

cond-mat.soft↗

arXiv2010

On the phase behavior of hard aspherical particles

We use numerical simulations to understand how random deviations from the ideal spherical shape affect the ability of hard particles to form fcc crystalline structures. Using a system of hard spheres as a reference, we determine the fluid-solid coexistence pressures of both shape-polydisperse and monodisperse systems of aspherical hard particles. We find that when particles are sufficiently isotropic, the coexistence pressure can be predicted from a linear relation involving the product of two simple geometric parameters characterizing the asphericity of the particles. Finally, our results allow us to gain direct insight into the crystallizability limits of these systems by rationalizing empirical data obtained for analogous monodisperse systems.

cond-mat.soft↗

arXiv2010

Effective elasticity of a flexible filament bound to a deformable cylindrical surface

We use numerical simulations to show how a fully flexible filament binding to a deformable cylindrical surface may acquire a macroscopic persistence length and a helical conformation. This is a result of the nontrivial elastic response to deformations of elastic sheets. We find that the filament's helical pitch is completely determined by the mechanical properties of the surface, and can be tuned by varying the filament binding energy. We propose simple scaling arguments to understand the physical mechanism behind this phenomenon and present a phase diagram indicating under what conditions one should expect a fully flexible chain to behave as a helical semi-flexible filament. Finally, we discuss the implications of our results.

cond-mat.soft↗