arXiv ScienceSearch

arXiv subjects

Andrei Slavin

Publications and source records attributed to Andrei Slavin.

At least 19 recordsLinked to original sources

A CMOS+X Spiking Neuron With On-Chip Machine Learning

We present the design and numerical simulation of a spiking neuron in a proof-of-concept model of on-chip machine learning. Built within the CMOS+X framework, the spiking neuron consists of an NMOS transistor combined with a magnetic tunnel junction (MTJ). This NMOS+MTJ unit, when simulated in the industry-standard circuit simulation software ``LTspice'', reproduces multiple functions of a biological neuron, including threshold spiking, latency, refractory periods, synaptic integration, and inhibition. These behaviors arise from the intrinsic magnetization dynamics of the MTJ and do not require any additional control circuitry. By interconnecting the NMOS+MTJ neurons, we construct a model of an analog multilayer network that learns through spike-timing-dependent weight updates derived from a gradient-descent rule, with both training and inference modeled in the analog domain. The simulated network demonstrates spike propagation and successful training on the XOR task under the modeled conditions.

physics.app-ph

Generation of Ultra-Broadband Frequency Comb in Strongly Bistable Nonlinear Magnonic Resonator

Magnonic frequency combs (MFCs) offer a promising route to compact, energy-efficient platforms for on-chip coherent microwave signal generation and processing. Conventional on-chip comb generation typically relies on nonlinear resonators supporting a series of equidistant, low-loss resonances driven by a strong monochromatic signal, resulting in fixed comb spacing defined by the resonator's free spectral range (FSR). Here we introduce and experimentally demonstrate a fundamentally different mechanism for ultrabroadband MFC generation using a highly nonlinear miniaturized magnonic resonator. The small resonator volume, combined with a slow-wave transducer, yields high intra-resonator power density, driving the system deep into the bistable regime where parametric excitation of propagating spin waves facilitates comb formation. Our approach yields more than 350 comb lines spanning a 450 MHz bandwidth, with spacing continuously tunable via a two-tone external drive, representing an order-of-magnitude enhancement over prior reports while operating at relatively low power. The platform is ultra-compact (4-6 orders of magnitude smaller in size than conventional YIG sphere resonators), fully scalable, and highly tunable, enabling precise control of comb properties through magnetic bias and pump manipulation. These results establish a new paradigm for frequency comb technology, unlocking transformative opportunities in microwave signal processing, neuromorphic computing, and precision sensing.

cond-mat.mes-hall

Adaptive Ising machine based on phase-locking of an auto-oscillator to a bi-harmonic external driving with noise

We introduce a universal theory of phase auto-oscillators driven by a bi harmonic signal (having frequency components close to single and double of the free-running oscillator frequency) with noise. With it, we show how deterministic phase locking and stochastic phase slips can be continuously tuned by varying the relative amplitudes and frequencies of the driving components. Using, as an example, a spin-torque nano-oscillator, we numerically validate this theory by implementing a deterministic Ising machine paradigm, a probabilistic one, and dual-mode operation of the two. This demonstration introduces the concept of adaptive Ising machines (AIM), a unified oscillator-based architecture that dynamically combines both regimes within the same hardware platform by properly tuning the amplitudes of the bi-harmonic driving relative to the noise strength. Benchmarking on different classes of combinatorial optimization problems, the AIM exhibits complementary performance compared to oscillator based Ising machines and probabilistic Ising machines, with adaptability to the specific problem class. This work introduces the first OIM capable of transitioning between deterministic and probabilistic computation taking advantage of a proper design of the trade-off between the strength of phase-locking of an auto-oscillator to a bi harmonic external driving and noise, opening a path toward scalable, CMOS compatible hardware for hybrid optimization and inference.

cond-mat.mes-hall

Spintronic Neuron Using a Magnetic Tunnel Junction for Low-Power Neuromorphic Computing

This paper proposes a novel spiking artificial neuron design based on a combined spin valve/magnetic tunnel junction (SV/MTJ). Traditional hardware used in artificial intelligence and machine learning faces significant challenges related to high power consumption and scalability. To address these challenges, spintronic neurons, which can mimic biologically inspired neural behaviors, offer a promising solution. We present a model of an SV/MTJ-based neuron which uses technologies that have been successfully integrated with CMOS in commercially available applications. The operational dynamics of the neuron are derived analytically through the Landau-Lifshitz-Gilbert-Slonczewski (LLGS) equation, demonstrating its ability to replicate key spiking characteristics of biological neurons, such as response latency and refractive behavior. Simulation results indicate that the proposed neuron design can operate on a timescale of about 1 ns, without any bias current, and with power consumption as low as 50 uW.

physics.app-ph

Pattern recognition using spiking antiferromagnetic neurons

Spintronic devices offer a promising avenue for the development of nanoscale, energy-efficient artificial neurons for neuromorphic computing. It has previously been shown that with antiferromagnetic (AFM) oscillators, ultra-fast spiking artificial neurons can be made that mimic many unique features of biological neurons. In this work, we train an artificial neural network of AFM neurons to perform pattern recognition. A simple machine learning algorithm called spike pattern association neuron (SPAN), which relies on the temporal position of neuron spikes, is used during training. In under a microsecond of physical time, the AFM neural network is trained to recognize symbols composed from a grid by producing a spike within a specified time window. We further achieve multi-symbol recognition with the addition of an output layer to suppress undesirable spikes. Through the utilization of AFM neurons and the SPAN algorithm, we create a neural network capable of high-accuracy recognition with overall power consumption on the order of picojoules.

cs.NE

A spinwave Ising machine

We demonstrate a spin-wave-based time-multiplexed Ising Machine (SWIM), implemented using a 5 $\mu$m thick Yttrium Iron Garnet (YIG) film and off-the-shelf microwave components. The artificial Ising spins consist of 34--68 ns long 3.125 GHz spinwave RF pulses with their phase binarized using a phase-sensitive microwave amplifier. Thanks to the very low spinwave group velocity, the 7 mm long YIG waveguide can host an 8-spin MAX-CUT problem and solve it in less than 4 $\mu$s while consuming only 7 $\mu$J. Using a real-time oscilloscope, we follow the temporal evolution of each spin as the SWIM minimizes its energy and find both uniform and domain-propagation-like switching of the spin state. The SWIM has the potential for substantial further miniaturization, scalability, speed, and reduced power consumption, and may become a versatile platform for commercially feasible optimization problem solvers with high performance.

cond-mat.mes-hall

Artificial neurons based on antiferromagnetic auto-oscillators as a platform for neuromorphic computing

Spiking artificial neurons emulate the voltage spikes of biological neurons, and constitute the building blocks of a new class of energy efficient, neuromorphic computing systems. Antiferromagnetic materials can, in theory, be used to construct spiking artificial neurons. When configured as a neuron, the magnetizations in antiferromagnetic materials have an effective inertia that gives them intrinsic characteristics that closely resemble biological neurons, in contrast with conventional artificial spiking neurons. It is shown here that antiferromagnetic neurons have a spike duration on the order of a picosecond, a power consumption of about 10^-3 pJ per synaptic operation, and built-in features that directly resemble biological neurons, including response latency, refraction, and inhibition. It is also demonstrated that antiferromagnetic neurons interconnected into physical neural networks can perform unidirectional data processing even for passive symmetrical interconnects. Flexibility of antiferromagnetic neurons is illustrated by simulations of simple neuromorphic circuits realizing Boolean logic gates and controllable memory loops.

cond-mat.mes-hall

Ultra-fast GHz-range swept-tuned spectrum analyzer with 20 ns temporal resolution based on a spin-torque nano-oscillator with a uniformly magnetized 'free' layer

The advantage of an ultra-fast frequency-tunability of spin-torque nano-oscillators (STNOs) that have large (> 100MHz) relaxation frequency of amplitude fluctuations is exploited to realize ultra-fast wide-band time-resolved spectral analysis at nanosecond time scale with the frequency resolution limited only by the 'bandwidth' theorem. The demonstration is performed with an STNO generating in the 9 GHz frequency range, and comprised of a perpendicular polarizer and a perpendicularly and uniformly magnetized 'free' layer. It is shown that such a uniform-state STNO-based spectrum analyzer can efficiently perform spectral analysis of frequency-agile signals with rapidly varying frequency components.

physics.app-ph

Vector Hamiltonian Formalism for Nonlinear Magnetization Dynamics

Vector Hamiltonian formalism (VHF) for the description of a weakly nonlinear magnetization dynamics has been developed. Transformation from the traditional Landau-Lifshitz equation, describing dynamics of a magnetization vector $\vec{m}(\vec{r}, t)$ on a sphere, to a vector Hamiltonian equation, describing dynamics of a \emph{spin excitation vector} $\vec{s}(\vec{r}, t)$ on a plane, is done using the azimuthal Lambert transformation that preserves both the phase-space area and vector structure of dynamical equations, and guarantees that the plane containing vector $\vec{s}(\vec{r}, t)$ is at each value of the coordinate $\vec{r}$ perpendicular to the a stationary vector $\vec{m}_0(\vec{r})$ describing the magnetization ground state of the system. By expanding vector $\vec{s}(\vec{r}, t)$ in a complete set of linear magnetic vector eigemodes $\vec{s}_\nu(\vec{r})$ of the studied system, and using a weakly nonlinear approximation $|\vec{s}(\vec{r}, t)| \ll 1$, it is possible to express the Hamiltonian function of the system in the form of integrals over the vector eigenmode profiles $\vec{s}_\nu(\vec{r})$, and calculate all the coefficients of this Hamiltonian. The developed approach allows one to describe weakly nonlinear dynamics in micro- and nano-scale magnetic systems with complicated geometries and spatially non-uniform ground states by numerically calculating linear spectrum and eigenmode profiles, and semi-analytically evaluating amplitudes of multi-mode nonlinear interactions. Examples of applications of the developed formalism to the magnetic systems having spatially nonuniform ground state of magnetization are presented.

cond-mat.mtrl-sci

Theory of three-magnon interaction in a vortex-state magnetic nanodot

We use vector Hamiltonian formalism (VHF) to study theoretically three-magnon parametric interaction (or three-wave splitting) in a magnetic disk existing in a magnetic vortex ground state. The three-wave splitting in a disk is found to obey two selection rules: (i) conservation of the total azimuthal number of the resultant spin-wave modes, and (ii) inequality for the radial numbers of interacting modes, if the mode directly excited by the driving field is radially symmetric (i.e. if the azimuthal number of the directly excited mode is $m = 0$). The selection rule (ii), however, is relaxed in the "small" magnetic disks, due to the influence of the vortex core. We also found, that the efficiency of the three-wave interaction of the directly excited mode strongly depends on the azimuthal and radial mode numbers of the resultant modes, that becomes determinative in the case when several splitting channels (several pairs of resultant modes) simultaneously approximately satisfy the resonance condition for the splitting. The good agreement of the VHF analytic calculations with the experiment and micromagnetic simulations proves the capability of the VHF formalism to predict the actual splitting channels and the magnitudes of the driving field thresholds for the three-wave splitting.

cond-mat.mes-hall

Micromagnetic modeling of Terahertz oscillations in an antiferromagnetic material driven by spin-Hall effect

The realization of THz sources is a fundamental aspect for a wide range of applications. Over different approaches, compact THz oscillators can be realized taking advantage of dynamics in antiferromagnetic (AFMs) thin films driven by spin-Hall effect. Here we perform a systematic study of these THz oscillators within a full micromagnetic solver based on the numerical solution of two coupled Landau-Lifshitz-Gilbert-Slonczewski equations, for the case of ultra-thin films, i.e. when the N\'eel temperature of an AFM is substantially reduced. We have found two different dynamical modes depending on the strength of the Dzyaloshinskii-Moriya interaction (DMI). At low DMI, a large amplitude precession is excited where both the magnetizations of the sublattices are in a uniform state and rotate in the same direction. At large enough DMI, the ground state of the AFM becomes non-uniform and the antiferromagnetic dynamics is characterized by ultrafast domain wall motion.

cond-mat.mes-hall

Ultra-fast wide band spectrum analyzer based on a rapidly tuned spin-torque nano-oscillator

A spintronic method of ultra-fast broadband microwave spectrum analysis is proposed. It uses a rapidly tuned spin torque nano-oscillator (STNO), and does not require injection locking. This method treats an STNO generating a microwave signal as an element with an oscillating resistance. When an external signal is applied to this "resistor" for analysis, it is mixed with the signal generated by the STNO. The resulting mixed voltage contains the "sum" and "difference" frequencies, and the latter produces a DC component when the external frequency matches the frequency generated by the STNO. The mixed voltage is processed using a low pass filter to exclude the "sum" frequency components, and a matched filter to exclude the dependence of the resultant DC voltage on the phase difference between the two signals. It is found analytically and by numerical simulation, that the proposed spectrum analyzer has a frequency resolution at a theoretical limit in a real-time scanning bandwidth of 10~GHz, and a frequency scanning rate above 1~GHz/ns, while remaining sensitive to signal power as low as the Johnson-Nyquist thermal noise floor.

cond-mat.mes-hall

Ultra-fast artificial neuron: generation of picosecond-duration spikes in a current-driven antiferromagnetic auto-oscillator

We demonstrate analytically and numerically, that a thin film of an antiferromagnetic (AFM) material, having biaxial magnetic anisotropy and being driven by an external spin-transfer torque signal, can be used for the generation of ultra-short "Dirac-delta-like" spikes. The duration of the generated spikes is several picoseconds for typical AFM materials and is determined by the in-plane magnetic anisotropy and the effective damping of the AFM material. The generated output signal can consist of a single spike or a discrete group of spikes ("bursting"), which depends on the repetition (clock) rate, amplitude, and shape of the external control signal. The spike generation occurs only when the amplitude of the control signal exceeds a certain threshold, similar to the action of a biological neuron in response to an external stimulus. The "threshold" behavior of the proposed AFM spike generator makes possible its application not only in the traditional microwave signal processing but also in the future neuromorphic signal processing circuits working at clock frequencies of tens of gigahertz.

cond-mat.mes-hall

Spintronic nano-scale harvester of broadband microwave energy

The harvesting of ambient radio-frequency (RF) energy is an attractive and clean way to realize the idea of self-powered electronics. Here we present a design for a microwave energy harvester based on a nanoscale spintronic diode (NSD). This diode contains a magnetic tunnel junction with a canted magnetization of the free layer, and can convert RF energy over the frequency range from 100 MHz to 1.2 GHz into DC electric voltage. An attractive property of the developed NSD is the generation of an almost constant DC voltage in a wide range of frequencies of the external RF signals. We further show that the developed NSD provides sufficient DC voltage to power a low-power nanodevice - a black phosphorus photo-sensor. Our results demonstrate that the developed NSD could pave the way for using spintronic detectors as building blocks for self-powered nano-systems, such as implantable biomedical devices, wireless sensors, and portable electronics.

physics.app-ph

Low Power Microwave Signal Detection With a Spin-Torque Nano-Oscillator in the Active Self-Oscillating Regime

A spin-torque nano-oscillator (STNO) driven by a ramped bias current can perform spectrum analysis quickly over a wide frequency bandwidth. The STNO spectrum analyzer operates by injection locking to external microwave signals and produces an output DC voltage $V_{\rm dc}$ that temporally encodes the input spectrum. We found, via numerical analysis with a macrospin approximation, that an STNO is able to scan a $10~\rm GHz$ bandwidth in less than $100~\rm ns$ (scanning rate $R$ exceeds $100~\rm MHz/ns$). In contrast to conventional quadratic microwave detectors, the output voltage of the STNO analyzer is proportional to the amplitude of the input microwave signal $I_{\rm rf}$ with sensitivity $S = dV_{\rm dc}/dI_{\rm rf} \approx 750~\rm mV/mA$. The minimum detectable signal of the analyzer depends on the scanning rate $R$ and, at low $R \approx 1~\rm MHz/ns$, is about $1~\rm pW$.

cond-mat.mes-hall

Reconfigurable nano-scale spin-wave directional coupler

A spin-wave (SW) directional coupler comprised of two laterally parallel nano-scale dipolarly-coupled SW waveguides is proposed and studied using micromagnetic simulations and analytical theory. The energy of a SW excited in one of the waveguides in the course of propagation is periodically transferred to the other waveguide and back, and the spatial half-period of this transfer is defined as the coupling length. The coupling length is determined by the dipolar coupling between the waveguides, and the fraction of the SW energy transferred to the other waveguide at the device output can be varied with the SW frequency, bias magnetic field, and relative orientation of the waveguide's static magnetizations. The proposed design of a directional coupler can be used in digital computing-oriented magnonics as a connector (multiplexer) of magnonic conduits without a direct contact, or in the analog microwave signal processing as a reconfigurable nano-scale power divider and/or frequency separator.

cond-mat.mes-hall

Antiferromagnetic THz-frequency Josephson-like Oscillator Driven by Spin Current

The development of compact and tunable room temperature sources of coherent THz-frequency signals would open a way for numerous new applications. The existing approaches to THz-frequency generation based on superconductor Josephson junctions (JJ), free electron lasers, and quantum cascades require cryogenic temperatures or/and complex setups, preventing the miniaturization and wide use of these devices. We demonstrate theoretically that a bi-layer of a heavy metal (Pt) and a bi-axial antiferromagnetic (AFM) dielectric (NiO) can be a source of a coherent THz signal. A spin-current flowing from a DC-current-driven Pt layer and polarized along the hard AFM anisotropy axis excites a non-uniform in time precession of magnetizations sublattices in the AFM, due to the presence of a weak easy-plane AFM anisotropy. The frequency of the AFM oscillations varies in the range of 0.1-2.0 THz with the driving current in the Pt layer from $10^8\text{A}/\text{cm}^2$ to $10^9\text{A}/\text{cm}^2$. The THz-frequency signal from the AFM with the amplitude exceeding 1 V/cm is picked up by the inverse spin-Hall effect in Pt. The operation of a room-temperature AFM THz-frequency oscillator is similar to that of a cryogenic JJ oscillator, with the energy of the easy-plane magnetic anisotropy playing the role of the Josephson energy.

cond-mat.mes-hall

Interface-Induced Phenomena in Magnetism

This article reviews static and dynamic interfacial effects in magnetism, focusing on interfacially-driven magnetic effects and phenomena associated with spin-orbit coupling and intrinsic symmetry breaking at interfaces. It provides a historical background and literature survey, but focuses on recent progress, identifying the most exciting new scientific results and pointing to promising future research directions. It starts with an introduction and overview of how basic magnetic properties are affected by interfaces, then turns to a discussion of charge and spin transport through and near interfaces and how these can be used to control the properties of the magnetic layer. Important concepts include spin accumulation, spin currents, spin transfer torque, and spin pumping. An overview is provided to the current state of knowledge and existing review literature on interfacial effects such as exchange bias, exchange spring magnets, spin Hall effect, oxide heterostructures, and topological insulators. The article highlights recent discoveries of interface-induced magnetism and non-collinear spin textures, non-linear dynamics including spin torque transfer and magnetization reversal induced by interfaces, and interfacial effects in ultrafast magnetization processes.

cond-mat.mtrl-sci