arXiv Science⌕ Search

arXiv subjects

Andreas Fichtner

Publications and source records attributed to Andreas Fichtner.

At least 19 recordsLinked to original sources
arXiv2026

Reconstructing effective ultrasound transducer models via distributed source inversion

Accurate modeling of ultrasound wave propagation is essential for high-fidelity simulation and imaging in ultrasonic testing. A primary challenge lies in characterizing the excitation source, particularly for transducers with large apertures relative to the acoustic wavelengths. In such cases, non-uniform excitation and spatial interference significantly affect the resulting radiation patterns. This paper proposes a distributed source inversion strategy to reconstruct an effective spatio-temporal transducer model that reproduces experimentally measured wavefields. The reconstructed source model captures aperture-dependent phase and amplitude variations without the need for detailed knowledge of the transducer structure. The approach is validated using directivity measurements on an aluminum half-cylinder, where simulations incorporating the reconstructed source model show close agreement with experimental directivity patterns and waveform shapes. Finally, synthetic studies on reverse time migration and full-waveform inversion demonstrate that accurate transducer modeling is critical for the success of simulation-based imaging and inversion workflows and significantly improves reconstruction quality.

physics.med-ph↗
arXiv2025

DASPack: Controlled Data Compression for Distributed Acoustic Sensing

We present DASPack, a high-performance, open-source compression tool specifically designed for distributed acoustic sensing (DAS) data. As DAS becomes a key technology for real-time, high-density, and long-range monitoring in fields such as geophysics, infrastructure surveillance, and environmental sensing, the volume of collected data is rapidly increasing. Large-scale DAS deployments already generate hundreds of terabytes and are expected to increase in the coming years, making long-term storage a major challenge. Despite this urgent need, few compression methods have proven to be both practical and scalable in real-world scenarios. DASPack is a fully operational solution that consistently outperforms existing techniques for DAS data. It enables both controlled lossy and lossless compression by allowing users to choose the maximum absolute difference per datum between the original and compressed data. The compression pipeline combines wavelet transforms, linear predictive coding, and entropy coding to optimise efficiency. Our method achieves up to 3x file size reductions for strain and strain rate data in lossless mode across diverse datasets. In lossy mode, compression improves to 6x with near-perfect signal fidelity, and up to 10x is reached with acceptable signal degradation. It delivers fast throughput (100-200 MB/s using a single-thread and up to 750 MB/s using 8-threads), enabling real-time deployment even under high data rates. We validated its performance on 15 datasets from a variety of acquisition environments, demonstrating its speed, robustness, and broad applicability. DASPack provides a practical foundation for long-term, sustainable DAS data management in large-scale monitoring networks.

physics.geo-ph↗
arXiv2025

Accelerating wave simulations with neural dispersion correctors

We present a Fourier neural operator network, designed to correct dispersion errors in numerical wave simulations. The neural dispersion corrector enables the replacement of a computationally expensive high-accuracy simulation by a less expensive low-accuracy simulation. In contrast to neural network surrogates that fully replace a wave equation, the neural dispersion corrector has only a weak dependence on the distribution of model parameters, such as wave speeds. Consequently, the network can be trained with a significantly smaller dataset, while still generalising to unseen input parameters. Following a description of the network architecture and training, we provide examples for the 3-D elastic wave equation. After training with merely 1$\,$000 examples on one GPU, the neural corrector achieves a speed-up of 16$\times$ compared to a reference spectral-element simulation and a generalisation to a broad range of strongly heterogeneous wave speed distributions.

physics.geo-ph↗
arXiv2025

Quantum Wave Simulation with Sources and Loss Functions

We present a quantum algorithmic framework for simulating linear, anti-Hermitian (lossless) wave equations in heterogeneous, anisotropic, and time-independent media. This framework encompasses a broad class of wave equations, including the acoustic wave equation, Maxwell$'$s equations and the elastic wave equation. Our formulation is compatible with standard numerical discretization schemes and allows for the efficient implementation of multiple practically relevant time- and space-dependent sources. Furthermore, we demonstrate that subspace energies can be extracted and wave fields compared through an $l_2$ loss function, achieving optimal precision scaling with the number of samples taken. Additionally, we introduce techniques for incorporating boundary conditions and linear constraints that preserve the anti-Hermitian nature of the equations. Leveraging the Hamiltonian simulation algorithm, our framework achieves a quartic speed-up over classical solvers in 3D simulations, under conditions of sufficiently global measurements and compactly supported sources and initial conditions. This quartic speed-up is optimal for time-domain solutions, as the Hamiltonian of the discretized wave equations has local couplings. In summary, our framework provides a versatile approach for simulating wave equations on quantum computers, offering substantial speed-ups over state-of-the-art classical methods.

quant-ph↗
arXiv2025

A high-resolution discourse on seismic tomography

Advances in data acquisition and numerical wave simulation have improved tomographic imaging techniques and results, but non-experts may find it difficult to understand which model is best for their needs. This paper is intended for these users. We argue that our notion of best is influenced by the extent to which models satisfy our biases. We explain how the basic types of seismic waves see Earth structure, illustrate the essential strategy of seismic tomography, discuss advanced adaptations such as full-waveform inversion, and emphasize the artistic components of tomography. The compounding effect of a plethora of reasonable, yet subjective choices is a range of models that differ more than their individual uncertainty analyses may suggest. Perhaps counter-intuitively, we argue producing similar tomographic models should not be the goal of seismic tomography. Instead, we promote a Community Monte Carlo effort to assemble a range of dissimilar models based on different modeling approaches and subjective choices, but which explain the seismic data. This effort could serve as input for geodynamic inferences with meaningful seismic uncertainties.

physics.geo-ph↗
arXiv2025

A discrete adjoint method for deterministic and probabilistic eikonal-equation-based inversion of traveltime for velocity and source location

Seismic traveltime tomography represents a popular and useful tool for unravelling the structure of the subsurface across the scales. In this work we address the case where the forward model is represented by the eikonal equation and derive a formalism to solve the inverse problem where gradients are calculated efficiently using the discrete adjoint state method. Our approach provides gradients with respect to both velocity structure and source locations, allowing us to perform a consistent joint inversion. The forward problem is solved using a second-order fast-marching method, which provides a strategy to efficiently solve the adjoint problem. Our approach allows for arbitrary positions of both sources and receivers and for a refined grid around the source region to reduce errors in computed traveltimes. We show how gradients computed using the discrete adjoint method can be employed to perform either deterministic inversion, i.e., solving an optimization problem, or for a probabilistic (Bayesian) approach, i.e., obtaining a posterior probability density function. We show applications of our methodology on a set of synthetic examples both in 2D and 3D using the L-BFGS algorithm for the deterministic case and the Hamiltonian Monte Carlo algorithm for the probabilistic case.

physics.geo-ph↗
arXiv2024

Seismic noise interferometry for phase transmission fibre optics

Similar to Distributed Acoustic Sensing (DAS), phase transmission fibre optics allows for large bandwidth seismic data measurements using fibre-optic cables. However, while the application range of DAS is limited to tens of kilometres, phase transmission fibre optics has an application range that can go up to thousands of kilometres. This new method has been shown as an effective method to record earthquakes, but its ability to record ambient seismic noise that can be used for seismic imaging and tomography is still up for question, and will be analysed in this work. We provide the theoretical foundation for the interpretation of seismic noise autocorrelations and interferometry from phase transmission fibre optics. Further, we test the model on actual phase transmission data sourced from a phase-stabilised optical frequency network in Switzerland. There, the phase stabilisation scheme measures and compensates noise on the optical phase caused by distortions of the fibre. We analyse the autocorrelation of the measured phase noise correction and explore potential interpretations by comparing it with the autocorrelation of a synthetically computed phase noise correction. This comparison is challenging due to two factors: the intricate cable geometry increases the computational cost of generating synthetic data, and the precise location and geometry of the cable are uncertain. Despite these difficulties, we believe that when applied to a different dataset, this approach could enable seismic tomography with ambient noise interferometry using a long-range fibre-optic sensing device.

physics.geo-ph↗
arXiv2024

Adjoint computation of Berry phase gradients

Berry phases offer a geometric perspective on wave propagation and are key to designing materials with topological wave transport. However, controlling Berry phases is challenging due to their dependence on global integrals over the Brillouin zone, making differentiation difficult. We present an adjoint-based method for efficiently computing the gradient of the Berry phase with respect to system parameters, involving only one forward and one adjoint calculation. This approach enables the use of advanced optimization techniques, such as topology optimization, to design new materials with tailored topological wave properties.

cond-mat.mes-hall↗
arXiv2024

Differences between quantum and classical adiabatic evolution

Adiabatic evolution is an emergent design principle for time modulated metamaterials, often inspired by insights from topological quantum computing such as braiding operations. However, the pursuit of classical adiabatic metamaterials is rooted in the assumption that classical and quantum adiabatic evolution are equivalent. We show that this is only true in the limit where the frequencies of all the bands are at infinite distance from $0$; and some instances of quantum adiabatic evolution, such as those containing zero modes, cannot be reproduced in classical systems. This is because mode coupling is fundamentally different in classical mechanics. We derive classical conditions to ensure adiabaticity and demonstrate that only under these conditions - which are different from quantum adiabatic conditions -, the single band Berry phase and Wilczek-Zee matrix for everywhere degenerate bands emerge as meaningful quantities encoding the geometry of classical adiabatic evolution. Finally, for general multiband systems we uncover a correction term in the non-Abelian gauge potential for classical systems.

cond-mat.mes-hall↗
arXiv2024

Locating clustered seismicity using Distance Geometry Solvers: applications for sparse and single-borehole DAS networks

The determination of seismic event locations with sparse networks or single-borehole systems remains a significant challenge in observational seismology. Leveraging the advantages of the location approach HADES, which was initially developed for locating clustered seismicity recorded at two stations, we present here an improved version of the methodology: HADES-R. Where HADES previously needed a minimum of 4 absolutely located master events, HADES-R solves a least-squares problem to find the relative inter-event distances in the cluster, and uses only a single master event to find the locations of all events, and subsequently applies rotational optimiser to find the cluster orientation. It can leverage iterative station combinations if multiple receivers are available, to describe the cluster shape and orientation uncertainty with a bootstrap approach. The improved method requires P- and S-phase arrival picks, a homogeneous velocity model, a single master event with a known location, and an estimate of the cluster width. The approach is benchmarked on the 2019 Ridgecrest sequence recorded at two stations, and applied to two seismic clusters at the FORGE geothermal test site, including a microseismic monitoring scenario with a DAS in a vertical borehole. Traditional procedures struggle in these settings due to the ill-posed network configuration. The azimuthal ambiguity in this scenario is partially overcome by assuming that all events belong to the same cluster around the master event and a cluster width estimate. We find the cluster shape in both cases, although the orientation remains uncertain. The method's ability to constrain the cluster shape and location with only one well-located event offers promising implications, especially for environments where limited or specialised instrumentation is in use.

physics.geo-ph↗
arXiv2024

A quantum computing concept for 1-D elastic wave simulation with exponential speedup

Quantum computing has attracted considerable attention in recent years because it promises speed-ups that conventional supercomputers cannot offer, at least for some applications. Though existing quantum computers are, in most cases, still too small to solve significant problems, their future impact on domain sciences is already being explored now. Within this context, we present a quantum computing concept for 1-D elastic wave propagation in heterogeneous media with two components: a theoretical formulation and an implementation on a real quantum computer. The method rests on a finite-difference approximation, followed by a sparsity-preserving transformation of the discrete elastic wave equation to a Schrödinger equation, which can be simulated directly on a gate-based quantum computer. An implementation on an error-free quantum simulator verifies our approach and forms the basis of numerical experiments with small problems on the real quantum computer IBM Brisbane. The latter produce simulation results that qualitatively agree with the error-free version but are contaminated by quantum decoherence and noise effects. Complementing the discrete transformation to the Schrödinger equation by a continuous version allows the replacement of finite differences by other spatial discretisation schemes, such as the spectral-element method. Anticipating the emergence of error-corrected quantum chips, an analogy between our method and analyses of coupled mass-spring systems suggests that our quantum computing approach may lead to wave field simulations that run exponentially faster than simulations on classical computers.

physics.geo-ph↗
arXiv2023

Nondestructive detection and quantification of localized corrosion rates by electrochemical tomography

Localized corrosion is one of the most common causes of early degradation of engineering structures. To non-destructively determine the location, size and rate of localized corrosion in porous media, a new technique, electrochemical tomography (ECT), has been theoretically and numerically formulated. The current work shows the application of ECT to measure corrosion rates in a controlled laboratory setup, with a stable electrolyte and well-defined macro-cell. The results show that ECT is able to replicate the corrosion size and location and can give a good estimation of the corrosion rate. Moreover, the validation of ECT on a well defined localized corrosion system, brings the technique closer to future field applications.

physics.app-ph↗
arXiv2023

Borehole fibre-optic seismology inside the Northeast Greenland Ice Stream

Ice streams are major contributors to ice sheet mass loss and sea level rise. Effects of their dynamic behaviour are imprinted into seismic properties, such as wave speeds and anisotropy. Here we present results from the first Distributed Acoustic Sensing (DAS) experiment in a deep ice-core borehole in the onset region of the Northeast Greenland Ice Stream. A series of active surface sources produced clear recordings of the P and S wavefield, including internal reflections, along a 1500 m long fibre-optic cable that was lowered into the borehole. The combination of nonlinear traveltime tomography with a firn model constrained by multi-mode surface wave data, allows us to invert for P and S wave speeds with depth-dependent uncertainties on the order of only 10 m$/$s, and vertical resolution of 20--70 m. The wave speed model in conjunction with the regularly spaced DAS data enable a straightforward separation of internal upward reflections followed by a reverse-time migration that provides a detailed reflectivity image of the ice. While the differences between P and S wave speeds hint at anisotropy related to crystal orientation fabric, the reflectivity image seems to carry a pronounced climatic imprint caused by rapid variations in grain size. Currently, resolution is not limited by the DAS channel spacing. Instead, the maximum frequency of body waves below $\sim$200 Hz, low signal-to-noise ratio caused by poor coupling, and systematic errors produced by the ray approximation, appear to be the leading-order issues. Among these, only the latter has a simple existing solution in the form of full-waveform inversion. Improving signal bandwidth and quality, however, will likely require a significantly larger effort in terms of both sensing equipment and logistics.

physics.geo-ph↗
arXiv2023

Test experiments with distributed acoustic sensing and hydrophone arrays for locating underwater sound sources

Whales and dolphins rely on sound for navigation and communication, making them an intriguing subject for studying language evolution. Traditional hydrophone arrays have been used to record their acoustic behavior, but optical fibers have emerged as a promising alternative. This study explores the use of distributed acoustic sensing (DAS), a technique that detects local stress in optical fibers, for underwater sound recording. An experiment was conducted in Lake Zurich, where a fiber-optic cable and a self-made hydrophone array were deployed. A test signal was broadcasted at various locations, and the resulting data was synchronized and consolidated into files. Analysis revealed distinct frequency responses in the DAS channels and provided insights into sound propagation in the lake. Challenges related to cable sensitivity, sample rate, and broadcast fidelity were identified. This dataset serves as a valuable resource for advancing acoustic sensing techniques in underwater environments, especially for studying marine mammal vocal behavior.

physics.ao-ph↗
arXiv2023

Long-range fiber-optic earthquake sensing by active phase noise cancellation

We present a long-range fiber-optic environmental deformation sensor based on active phase noise cancellation (PNC) in metrological frequency dissemination. PNC sensing exploits recordings of a compensation frequency that is commonly discarded. Without the need for dedicated measurement devices, it operates synchronously with metrological services, suggesting that existing phase-stabilized metrological networks can be co-used effortlessly as environmental sensors. The compatibility of PNC sensing with inline amplification enables the interrogation of cables with lengths beyond 1000 km, making it a potential contributor to earthquake detection and early warning in the oceans. Using spectral-element wavefield simulations that accurately account for complex cable geometry, we compare observed and computed recordings of the compensation frequency for a magnitude 3.9 earthquake in south-eastern France and a 123 km fiber link between Bern and Basel, Switzerland. The match in both phase and amplitude indicates that PNC sensing can be used quantitatively, for example, in earthquake detection and characterization.

physics.geo-ph↗
arXiv2023

HMCLab: a framework for solving diverse geophysical inverse problems using the Hamiltonian Monte Carlo method

The use of the probabilistic approach to solve inverse problems is becoming more popular in the geophysical community, thanks to its ability to address nonlinear forward problems and to provide uncertainty quantification. However, such strategy is often tailored to specific applications and therefore there is a lack of a common platform for solving a range of different geophysical inverse problems and showing potential and pitfalls. We demonstrate a common framework to solve such inverse problems ranging from, e.g, earthquake source location to potential field data inversion and seismic tomography. Within this approach, we can provide probabilities related to certain properties or structures of the subsurface. Thanks to its ability to address high-dimensional problems, the Hamiltonian Monte Carlo (HMC) algorithm has emerged as the state-of-the-art tool for solving geophysical inverse problems within the probabilistic framework. HMC requires the computation of gradients, which can be obtained by adjoint methods, making the solution of tomographic problems ultimately feasible. These results can be obtained with "HMCLab", a tool for solving a range of different geophysical inverse problems using sampling methods, focusing in particular on the HMC algorithm. HMCLab consists of a set of samplers and a set of geophysical forward problems. For each problem its misfit function and gradient computation are provided and, in addition, a set of prior models can be combined to inject additional information into the inverse problem. This allows users to experiment with probabilistic inverse problems and also address real-world studies. We show how to solve a selected set of problems within this framework using variants of the HMC algorithm and analyze the results. HMCLab is provided as an open source package written both in Python and Julia, welcoming contributions from the community.

physics.geo-ph↗
arXiv2023

Fiber-optic detection of snow avalanches using telecommunication infrastructure

We demonstrate the detectability of snow avalanches using Distributed Acoustic Sensing (DAS) with existing fiber-optic telecommunication cables. For this, during winter 2021/2022, we interrogated a 10 km long cable closely following the avalanche prone Fluelapass road in the Swiss Alps. In addition to other signals like traffic and earthquakes, the DAS data contain clear recordings of numerous snow avalanches, even though most of them do not reach the cable. Here we present two examples of snow avalanche recordings that could be verified photographically. Our results open new perspectives for cost-effective, near-real-time avalanche monitoring over long distances using pre-installed fiber-optic infrastructure.

physics.geo-ph↗