arXiv subjects

Andrea Morello

Publications and source records attributed to Andrea Morello.

At least 19 recordsLinked to original sources

arXiv2026

Dispersive Readout of a SiMOS Quantum Dot Using a Flip-Chip Integrated Microwave Resonator

Heterogeneous integration provides a promising route to combine semiconductor quantum dot devices and superconducting microwave circuits, while allowing each component to be fabricated using an optimized process flow. Here, we demonstrate a flip-chip integrated platform for dispersive readout of silicon metal-oxide semiconductor (SiMOS) quantum dot devices. A SiMOS double quantum dot chip is bonded to a superconducting aluminum resonator chip using indium bump interconnects to enable microwave coupling to the quantum dot gate. We show that the developed flip-chip process is compatible with cryogenic operation of both the SiMOS device and the superconducting resonator, and demonstrate resonator-based detection of charge transitions in the quantum dot system. The readout signal-to-noise ratio follows a dependence of $\sqrt{t}$ with the integration time, reaching SNR = 1 at an integration time of approximately 0.3 ms. These results establish flip-chip bonding as a viable integration approach for SiMOS quantum dot devices operating at both dc and microwave frequencies, with potential applications for resonator-based techniques such as spin-photon coupling.

cond-mat.mes-hall↗

arXiv2026

Gate Stack Engineering for High-Mobility and Low-Noise SiMOS Quantum Devices

We systematically investigate the interplay between materials engineering, quantum transport, and low-frequency charge noise in silicon metal--oxide--semiconductor (SiMOS) quantum devices. By combining Hall-bar transport measurements with charge-noise spectroscopy of gate-defined quantum dots, we identify correlations between gate-stack design, carrier mobility, and electrostatic noise, providing an experimental case study of material and process dependencies relevant to low-noise, high-mobility operation. Hall-bar studies reveal that increasing the atomic-layer-deposition temperature of Al$_2$O$_3$ markedly enhances mobility, whereas the choice of oxidant has little impact. Devices incorporating HfO$_2$ exhibit improved carrier mobility, an interesting observation that can plausibly be attributed to defect passivation associated with aluminum diffusion from the gate metal into the HfO$_2$ layer. Charge-noise measurements show a strong correlation between higher mobility and reduced noise, with TiPd-gated devices displaying both degraded transport and elevated charge noise. In contrast, the poly-Si-gated CMOS-foundry device achieves the lowest noise levels. Finally, dual-feedback dot--sensor stability mapping demonstrates enhanced charge stability in devices with the gate stacks studied here, underscoring their promise for scalable, high-fidelity silicon spin-qubit platforms.

cond-mat.mes-hall↗

arXiv2026

Qudit Designs and Where to Find Them

Unitary t-designs are some of the most versatile tools in quantum information theory. Their applications range from randomized benchmarking and shadow tomography, to more fundamental ones such as emulating quantum chaos and establishing exponential separations between classical and quantum query complexity. While unitary designs originating from a group structure, such as the Clifford group, have proven to be incredibly useful for qubit systems, unfortunately, this is no longer true for qudits. In fact, the classification of finite-group representations rules out the existence of unitary 2-designs for arbitrary qudit dimensions. This severely limits the applicability of standard quantum information primitives when it comes to qudit systems. We overcome these limitations with a three-fold contribution. First, we introduce a general technique to construct families of weighted state t-designs in arbitrary qudit dimensions. These weighted state-designs generalize classical shadow tomography protocol from qubits to qudits. Second, we introduce a Clifford character RB that allows us to benchmark the qudit Clifford group in any dimension, including non-prime-power dimensions. And third, we establish bounds on the quantum circuit complexity of generating approximate unitary-designs from native gates in existing quantum hardware such as high-spin and cavity-QED qudits. Our work further highlights the analogy between spin and optical coherent states by proving that spin-GKP codewords form a state 2-design while spin coherent states do not; in direct analogy with the optical case. This work is structured as a pedagogical and self-contained introduction to unitary designs and their applications to qudit systems.

quant-ph↗

arXiv2026

Electron readout contrast enhancement in the parallel nuclear regime of an exchange-coupled donor spin qubit system

Recent experiments on donor-based spin qubits in silicon have leveraged the exchange interaction between electrons bound to separate donor nuclei to perform two-qubit operations. A consistently observed yet unexplained phenomenon in such systems is the significant increase in electron readout contrast, measured via Elzerman-style readout to a single-electron transistor (SET) island, when the donor nuclei are initialized in a parallel spin orientation compared to an anti-parallel orientation. In this work, we present a detailed analysis of the exchange-coupled donor system in the parallel nuclear regime and propose a physical mechanism for this effect. We attribute the enhanced readout contrast to an additional electron tunneling event to the SET during a single read period, when the donor nuclei are aligned in a parallel spin configuration. These insights inform strategies for improving electron readout fidelity in these systems and contribute to a more complete understanding of spin-dependent tunnelling processes in donor-based qubit architectures.

quant-ph↗

arXiv2026

Single-Step Parity Check Gate Set for Quantum Error Correction

A key requirement for an effective Quantum Error Correction (QEC) scheme is that the physical qubits have error rates below a certain threshold. The value of this threshold depends on the details of the specific QEC scheme, and its hardware-level implementation. This is especially important with parity-check circuits, which are the fundamental building blocks of QEC codes. The standard way of constructing the parity check circuit is using a universal set of gates, namely sequential CNOT gates, single-qubit rotations and measurements. We exploit the insight that a QEC code does not require universal logic gates, but can be simplified to perform the sole task of error detection and correction. By building gates that are fundamental to QEC, we can boost the threshold and ease the experimental demands on the physical hardware. We present a rigorous formalism for constructing and verifying the error behavior of these gates, linking the physical measurement of a process matrix to the abstract error models commonly used in QEC analysis. This allows experimentalists to directly map the gates used in their systems to thresholds derived for a broad-class of QEC codes. We give an example of these new constructions using the model system of two nuclear spins, coupled to an electron spin, showing the potential benefits of redesigning fundamental gate sets using QEC primitives, rather than traditional gate sets reliant on simple single and two-qubit gates.

quant-ph↗

arXiv2025

Near-deterministic photon entanglement from a spin qudit in silicon using third quantisation

Unlike other quantum hardware, photonic quantum architectures can produce millions of qubits from a single device. However, controlling photonic qubits remains challenging, even at small scales, due to their weak interactions, making non-deterministic gates in linear optics unavoidable. Nevertheless, a single photon can readily spread over multiple modes and create entanglement within the multiple modes deterministically. Rudolph's concept of third quantization leverages this feature by evolving multiple single-photons into multiple modes, distributing them uniformly and randomly to different parties, and creating multipartite entanglement without interactions between photons or non-deterministic gates. This method requires only classical communication and deterministic entanglement within multi-mode single-photon states and enables universal quantum computing. The multipartite entanglement generated within the third quantization framework is nearly deterministic, where ``deterministic'' is achieved in the asymptotic limit of a large system size. In this work, we propose a near-term experiment using antimony donor in a silicon chip to realize third quantization. Utilizing the eight energy levels of antimony, one can generate two eight-mode single-photon states independently and distribute them to parties. This enables a random multipartite Bell-state experiment, achieving a Bell state with an upper-bound efficiency of 87.5% among 56 random pairs without non-deterministic entangling gates. This approach opens alternative pathways for silicon-based photonic quantum computing.

quant-ph↗

arXiv2025

Maximizing the nondemolition nature of a quantum measurement via an adaptive readout protocol

Quantum error correction (QEC) requires non-invasive measurements for fault tolerant quantum computing. Deviations from ideal quantum non-demolition (QND) measurements can disturb the encoded information. To address this challenge, we develop a readout protocol for a $D-$dimensional system that, after a single positive outcome, switches to probing only the $D{-}1$ remaining subspace. This adaptive switching strategy minimizes measurement-induced errors by relying on negative-result measurement results that do not perturb the Hamiltonian. We apply the protocol on an 8-dimensional $^{123}{\rm Sb}$ nuclear qudit in silicon, and achieve an increase in the readout fidelity from $(98.93\pm0.07)\%$ to $(99.61\pm0.04)\%$, while reducing threefold the overall readout time. To highlight the broader relevance of measurement-induced errors, we study a 10-dimensional $^{73}{\rm Ge}$ nuclear spin read out through Pauli spin blockade, revealing nuclear spin flips arising from hyperfine and quadrupole interactions. These results unveil the effect of non-ideal QND readout across diverse platforms, and introduce an efficient readout protocol that can be implemented with minimal FPGA logic on existing hardware.

quant-ph↗

arXiv2025

Automatic tuning of a donor in a silicon quantum device using machine learning

Donor spin qubits in silicon offer one- and two-qubit gates with fidelities beyond 99%, coherence times exceeding 30 seconds, and compatibility with industrial manufacturing methods. This motivates the development of large-scale quantum processors using this platform, and the ability to automatically tune and operate such complex devices. In this work, we present the first machine learning algorithm with the ability to automatically locate the charge transitions of an ion-implanted donor in a silicon device, tune single-shot charge readout, and identify the gate voltage parameters where tunnelling rates in and out the donor site are the same. The entire tuning pipeline is completed on the order of minutes. Our results enable both automatic characterisation and tuning of a donor in silicon devices faster than human experts.

cond-mat.mes-hall↗

arXiv2025

Coupling a $^{73}$Ge nuclear spin to an electrostatically defined quantum dot

Single nuclear spins in silicon are a promising resource for quantum technologies due to their long coherence times and excellent control fidelities. Qubits and qudits have been encoded on donor nuclei, with successful demonstrations of Bell states and quantum memories on the spin-1/2 $^{31}$P and cat-qubits on the spin-7/2 $^{123}$Sb nuclei. Isoelectronic nuclear spins coupled to gate-defined quantum dots, such as the naturally occurring $^{29}$Si isotope, possess no additional charge and allow for the coupled electron to be shuttled without destroying the nuclear spin coherence. Here, we demonstrate the coupling and readout of a spin-9/2 $^{73}$Ge nuclear spin to a gate-defined quantum dot in SiMOS. The $^{73}$Ge nucleus was implanted by isotope-selective ion-implantation. We observe the hyperfine interaction (HFI) to the coupled quantum dot electron and are able to tune it from 180 kHz to 350 kHz, through the voltages applied to the lateral gate electrodes. This work lays the foundation for future spin control experiments on the spin-9/2 qudit as well as more advanced experiments such as entanglement distribution between distant nuclear spins or repeated weak measurements.

cond-mat.mes-hall↗

arXiv2025

Tomography of entangling two-qubit logic operations in exchange-coupled donor electron spin qubits

Scalable quantum processors require high-fidelity universal quantum logic operations in a manufacturable physical platform. Donors in silicon provide atomic size, excellent quantum coherence and compatibility with standard semiconductor processing, but no entanglement between donor-bound electron spins has been demonstrated to date. Here we present the experimental demonstration and tomography of universal 1- and 2-qubit gates in a system of two weakly exchange-coupled electrons, bound to single phosphorus donors introduced in silicon by ion implantation. We surprisingly observe that the exchange interaction has no effect on the qubit coherence. We quantify the fidelity of the quantum operations using gate set tomography (GST), and we use the universal gate set to create entangled Bell states of the electrons spins, with fidelity ~ 93%, and concurrence 0.91 +/- 0.08. These results form the necessary basis for scaling up donor-based quantum computers.

quant-ph↗

arXiv2025

Scalable entanglement of nuclear spins mediated by electron exchange

The use of nuclear spins for quantum computation is limited by the difficulty in creating genuine quantum entanglement between distant nuclei. Current demonstrations of nuclear entanglement in semiconductors rely upon coupling the nuclei to a common electron, which is not a scalable strategy. Here we demonstrate a two-qubit Control-Z logic operation between the nuclei of two phosphorus atoms in a silicon device, separated by up to 20 nanometers. Each atoms binds separate electrons, whose exchange interaction mediates the nuclear two-qubit gate. We prepare and measure a nuclear Bell state with a fidelity of 76 +/- 5 $\%$ and a concurrence of 0.67 +/- 0.05. With this method, future progress in scaling up semiconductor spin qubits can be extended to the development of nuclear-spin based quantum computers.

quant-ph↗

arXiv2025

Scalable quantum current source on commercial CMOS process technology

Many quantum technologies require a precise electrical current standard that can only be achieved with expensive cryogenics, or through the secondary standards, such as resistance or voltage. Silicon-based charge pumps could provide such a standard in an inherently scalable way, through their compatibility with complementary metal-oxide-semiconductor (CMOS) fabrication methods. However, coherent quantized charge transfer has so far been demonstrated only in nanoscale devices that are custom-fabricated in academic cleanrooms or research technology foundries. Here, we show that a CMOS device manufactured with commercial 22-nm process node can be used to define a quantum current standard in the International System of Units (SI). We measure an accuracy of (1.2 +/- 0.1)E-3 A/A at 50 MHz with reference to SI voltage and resistance standards in a pumped helium system. We then propose a practical monolithic CMOS chip that incorporates one million parallel connected charge pumps along with on-chip control electronics. This chip could be operated as a table-top primary standard that can be easily integrated with CMOS electronics, generating quantum currents of up to microampere levels.

physics.app-ph↗

arXiv2025

Roadmap on Atomic-scale Semiconductor Devices

Spin states in semiconductors provide exceptionally stable and noise-resistant environments for qubits, positioning them as optimal candidates for reliable quantum computing technologies. The proposal to use nuclear and electronic spins of donor atoms in silicon, introduced by Kane in 1998, sparked a new research field focused on the precise positioning of individual impurity atoms for quantum devices, utilising scanning tunnelling microscopy and ion implantation. This roadmap article reviews the advancements in the 25 years since Kane's proposal, the current challenges, and the future directions in atomic-scale semiconductor device fabrication and measurement. It covers the quest to create a silicon-based quantum computer and expands to include diverse material systems and fabrication techniques, highlighting the potential for a broad range of semiconductor quantum technological applications. Key developments include phosphorus in silicon devices such as single-atom transistors, arrayed few-donor devices, one- and two-qubit gates, three-dimensional architectures, and the development of a toolbox for future quantum integrated circuits. The roadmap also explores new impurity species like arsenic and antimony for enhanced scalability and higher-dimensional spin systems, new chemistry for dopant precursors and lithographic resists, and the potential for germanium-based devices. Emerging methods, such as photon-based lithography and electron beam manipulation, are discussed for their disruptive potential. This roadmap charts the path toward scalable quantum computing and advanced semiconductor quantum technologies, emphasising the critical intersections of experiment, technological development, and theory.

quant-ph↗

arXiv2025

Schrödinger cat states of a nuclear spin qudit in silicon

High-dimensional quantum systems are a valuable resource for quantum information processing. They can be used to encode error-correctable logical qubits, which has been demonstrated using continuous-variable states in microwave cavities or the motional modes of trapped ions. For example, high-dimensional systems can be used to realise `Schrödinger cat' states, superpositions of widely displaced coherent states that can also be used to illustrate quantum effects at large scales. Recent proposals have suggested encoding qubits in high-spin atomic nuclei, finite-dimensional systems that can host hardware-efficient versions of continuous-variable codes. Here we demonstrate the creation and manipulation of Schrodinger cat states using the spin-7/2 nucleus of an antimony atom embedded in a silicon nanoelectronic device. We use a multi-frequency control scheme to produce spin rotations that preserve the symmetry of the qudit, and constitute logical Pauli operations for qubits encoded in the Schrodinger cat states. Our work demonstrates the ability to prepare and control nonclassical resource states, a prerequisite for applications in quantum information processing and quantum error correction using our scalable, manufacturable semiconductor platform.

quant-ph↗

arXiv2024

Certifying the quantumness of a nuclear spin qudit through its uniform precession

Spin precession is a textbook example of dynamics of a quantum system that exactly mimics its classical counterpart. Here we challenge this view by certifying the quantumness of exotic states of a nuclear spin through its uniform precession. The key to this result is measuring the positivity, instead of the expectation value, of the $x$-projection of the precessing spin, and using a spin > 1/2 qudit, that is not restricted to semi-classical spin coherent states. The experiment is performed on a single spin-7/2 $^{123}$Sb nucleus, implanted in a silicon nanoelectronic device, amenable to high-fidelity preparation, control, and projective single-shot readout. Using Schrödinger cat states and other bespoke states of the nucleus, we violate the classical bound by 19 standard deviations, proving that no classical probability distribution can explain the statistic of this spin precession, and highlighting our ability to prepare quantum resource states with high fidelity in a single atomic-scale qudit.

quant-ph↗

arXiv2024

Universal transversal gates

A long-standing challenge in quantum error correction is the infeasibility of universal transversal gates, as shown by the Eastin-Knill theorem. We obtain a necessary and sufficient condition for a quantum code to have universal transversal gates and show that the Eastin-Knill no-go result is a special case that does not hold for a general error model. We present a code construction using $n$ $d$-dimensional systems that changes the logical error probability from a lower bound $Ω(1/n\log d)$ to an upper bound $\mathcal O (1/n d)$ and allows exact correction of both local and correlated errors. Our universality condition determines the existence of a universal gate set for any quantum error-correcting code.

quant-ph↗

arXiv2024

Violating Bell's inequality in gate-defined quantum dots

Superior computational power promised by quantum computers utilises the fundamental quantum mechanical principle of entanglement. However, achieving entanglement and verifying that the generated state does not follow the principle of local causality has proven difficult for spin qubits in gate-defined quantum dots, as it requires simultaneously high concurrence values and readout fidelities to break the classical bound imposed by Bell's inequality. Here we employ heralded initialization and calibration via gate set tomography (GST), to reduce all relevant errors and push the fidelities of the full 2-qubit gate set above 99 %, including state preparation and measurement (SPAM). We demonstrate a 97.17 % Bell state fidelity without correcting for readout errors and violate Bell's inequality with a Bell signal of S = 2.731 close to the theoretical maximum of $2\sqrt{2}$. Our measurements exceed the classical limit even at elevated temperatures of 1.1 K or entanglement lifetimes of 100 $μs$.

cond-mat.mes-hall↗

arXiv2024

Assessment of error variation in high-fidelity two-qubit gates in silicon

Achieving high-fidelity entangling operations between qubits consistently is essential for the performance of multi-qubit systems and is a crucial factor in achieving fault-tolerant quantum processors. Solid-state platforms are particularly exposed to errors due to materials-induced variability between qubits, which leads to performance inconsistencies. Here we study the errors in a spin qubit processor, tying them to their physical origins. We leverage this knowledge to demonstrate consistent and repeatable operation with above 99% fidelity of two-qubit gates in the technologically important silicon metal-oxide-semiconductor (SiMOS) quantum dot platform. We undertake a detailed study of these operations by analysing the physical errors and fidelities in multiple devices through numerous trials and extended periods to ensure that we capture the variation and the most common error types. Physical error sources include the slow nuclear and electrical noise on single qubits and contextual noise. The identification of the noise sources can be used to maintain performance within tolerance as well as inform future device fabrication. Furthermore, we investigate the impact of qubit design, feedback systems, and robust gates on implementing scalable, high-fidelity control strategies. These results are achieved by using three different characterization methods, we measure entangling gate fidelities ranging from 96.8% to 99.8%. Our analysis tools identify the causes of qubit degradation and offer ways understand their physical mechanisms. These results highlight both the capabilities and challenges for the scaling up of silicon spin-based qubits into full-scale quantum processors.

quant-ph↗