arXiv Science⌕ Search

arXiv subjects

Andrea Lani

Publications and source records attributed to Andrea Lani.

At least 19 recordsLinked to original sources

An implicit high-order flux reconstruction method with logarithmic variables for hypersonic flows in thermochemical nonequilibrium

Simulating hypersonic flows in thermochemical nonequilibrium requires solving the Navier-Stokes equations for reacting, possibly ionised mixtures. Compact high-order computations of viscous two-temperature air flows on unstructured grids have not gone beyond P = 2. We present an implicit Flux Reconstruction (FR) method for such flows, built on three ingredients. First, the solver stores and updates the logarithms of the partial densities and temperatures, making every state admissible without a positivity limiter and, for ionised mixtures, imposing charge neutrality consistently with the implicit update. Second, shocks are captured by subcell order blending, extended to steady implicit computations on curved Gauss-Legendre meshes, with second-order subcell blending in subsonic regions and an automatic freeze of the blending near convergence. Third, a pseudo-transient Newton method with a physicality-limited update and automatic CFL control reaches steady state from the free stream with the same settings at every order. The design order is verified up to sixth order on a manufactured solution for five-species air with finite-rate chemistry and vibrational relaxation. Steady viscous solutions up to sixth order are obtained for five- and eleven-species air on the High Enthalpy shock tunnel Göttingen (HEG) cylinder and for eleven-species air on the RAM-C II vehicle. To our knowledge, this work gives the first design-order verification of a high-order method with finite-rate air chemistry and vibrational relaxation, and the first high-order finite-element-type computations of viscous eleven-species, two-temperature air. On the HEG cylinder, the stagnation-point heat flux is within 2% of finite-volume references and within 6% of the measurements, with a comparable number of degrees of freedom to second-order finite-volume computations but on meshes with 20 to 40 times fewer elements.

physics.comp-ph↗

HelioFill: History-Conditioned Diffusion Estimation of Solar Far-Side EUV Emission

The loss of STEREO-B in 2014 created a persistent blind spot in Extreme UltraViolet imaging of the solar far-side. We present textbf{HelioFill}, to the authors' knowledge, the first denoising-diffusion inpainting model that estimates the unobserved sector of full-Sun 304 A maps from the current Earth-side (SDO) and STEREO-A views. Because these views cannot constrain structures fully enclosed in the unobserved sector, HelioFill's diffusion stage is also conditioned on the sector's own rotation history, supplied as causal persistence and information-age maps; a rectified-flow refinement then adds realistic small-scale texture. Test rotations are separated from the diffusion stage's training timestamps by full-rotation guard bands. Over the unobserved sector, HelioFill's estimate correlates with the three-view truth at rho=0.520, above persistence and the input-independent climatological mean on 97.9% of the test maps, which conditioning on the current views alone does not achieve; in peak signal-to-noise ratio it exceeds them by 2.27 and 0.66 dB and matches a direct observation of the sector made approx 29h before or after it. The refinement lowers learned perceptual image patch similarity by 11% at a cost of 0.50 dB and 0.055 in correlation. HelioFill localizes active regions better than persistence (Dice score 0.449 vs. 0.384) and detects fully enclosed ones, although persistence detects more individual regions and coronal holes remain poorly reproduced. Against near-simultaneous far-side Solar Orbiter/EUI observations from 2022-2025, HelioFill correlates with the truth at rho=0.375, above climatology and level with persistence, which it exceeds in PSNR and structural similarity index; its diffusion stage alone reaches 0.460, above both, and the refinement stage costs the difference. HelioFill thus provides observationally plausible global EUV context within quantified limits.

astro-ph.SR↗

Adding slow magnetoacoustic mode to the HLL-type multi-state approximate Riemann solution

Multi-state HLL-type approximate Riemann solutions of ideal magnetohydrodynamics (MHD) typically assume that the medium within the Riemann fan is incompressible, and thus the slow magnetoacoustic mode cannot be included in their space-time wave configurations for the intermediate states. We propose a new strategy to design multi-state HLL-type solutions, allowing for the medium within the Riemann fan to be compressible. In particular, for the complete seven-wave configuration of the MHD Riemann problem, we estimate the slow magnetoacoustic speeds and a longitudinal flow speed between the slow modes, whose compressibility is estimated based on the relations between fast, Alfvén, and slow speeds. Then, following the conservation laws and Rankine-Hugoniot jump relations across the fast, Alfvén, and slow waves, we calculate all the intermediate states within the Riemann fan. Moreover, we discuss the solutions when certain wave modes degenerate, ensuring well-posedness and smooth transitions between complete and degenerate wave configurations. Numerical simulations using a Finite Volume solver show that the proposed approximate Riemann solution is less diffusive than the classic HLLD scheme, particularly for slow mode waves. For example, in a 1D test case with a strong longitudinal magnetic field, the new scheme needs one order of magnitude fewer grid cells compared to the classic HLLD scheme to resolve all wave modes.

physics.comp-ph↗

Magnetohydrodynamic coronal modelling with high-fidelity magnetograms

To resolve coronal structures in detail, it is essential to constrain the coronal model using high-fidelity magnetograms with minimal smoothing. In this paper, we improve the numerical stability of COCONUT to enable efficient coronal MHD simulations driven directly by photospheric magnetograms, including magnetic field strengths exceeding 1000 Gauss (G), and then use it to investigate the impact of small-scale magnetic field structures that are typically filtered out of photospheric magnetograms on the coronal simulation results. We constrain this model with two types of magnetograms: the high-fidelity HMI photospheric magnetogram with only minor preprocessing through Gaussian smoothing, which preserves magnetic field strengths reaching 1500 G, and one processed using 50th-order filtered spherical harmonics, where the magnetic field strength is limited to below 100 G. The results demonstrate that the COCONUT can reproduce the large-scale coronal structures revealed by pB and EUV observations. Compared with the coronal MHD simulation constrained by a conventionally filtered magnetogram, the simulation constrained by the high-fidelity magnetogram yields approximately $50\%$ more OMF and produces EUV images that are more consistent with the observations. Moreover, the results show that when viewed from low latitudes in certain EUV passbands, such as the 193~Å channel, open-field regions near the solar poles may appear as bright structures that are typically associated with closed-field regions. This finding highlights the need for solar polar-orbiting missions to overcome the limitations and ambiguities arising from the restricted view of the polar regions from the ecliptic plane and to provide more complete full-Sun observations.

astro-ph.SR↗

MHD modeling of magnetic flux evolution around solar maximum by the coronal model COCONUT

In this paper, we simulate the magnetic flux evolution at different heliocentric distances during two solar-maximum Carrington rotations (CRs) using the time-evolving coronal magnetohydrodynamic (MHD) model COCONUT to investigate the ``open flux problem". The simulated open magnetic flux (OMF) near the solar surface is comparable to that derived from \textit{in situ} observations by PSP and WIND satellites, and is about 5 times larger than that derived from SDO coronal hole (CH) observations, and the variation in the simulated radial solar wind speed is consistent with the evolution of the OMF evaluated around the corresponding solar disk center. We find that the OMF is reduced by up to $45\%$ from 1.01~$R_s$ to 0.1~AU and increases with a higher-resolution mesh. The OMF decreases mainly within 3~$R_s$, where the closed magnetic flux drops more rapidly, from about $60\%$ of the total magnetic flux at 1.01~$R_s$ to about $4\%$ at 3~$R_s$. Moderate adjustment of the heating source term can effectively regulate the simulated OMF. Preprocessing the photospheric magnetograms with a potential field solver that removes many high-order spherical harmonic components reduces the OMF in the low corona, while having little impact beyond 3~$R_s$. Additionally, the ratio of the maximum to the minimum OMF can reach 1.4 during a single solar maximum CR. These findings highlight the necessity of considering higher grid resolution, more realistic heating mechanisms, and the time-evolving regime of coronal MHD modeling when further addressing the ``open flux problem".

astro-ph.SR↗

COCONUT: Toward practical time-evolving Sun-to-Earth magnetohydrodynamic modeling

Due to computational efficiency and numerical stability limitations, coronal simulations constrained by static magnetograms are typically performed first and then used to drive inner-heliosphere (IH) models. In this paper, we calculate the Sun-to-Earth coronal and wind evolutions using a single time-evolving MHD model, showing that implicit MHD models have the potential to meaningfully simplify and improve the overall Sun-to-Earth modelling pipeline. We extend the implicit time-evolving coronal MHD model COCONUT out to 1 AU, and utilise it to investigate solar coronal and wind evolutions around a solar maximum Carrington rotation (CR). We compare quasi-steady-state and time-evolving Sun-to-Earth simulations to evaluate the impact of the inner-boundary magnetic field evolution, which is neglected in steady-state simulations, on background plasma parameters. Comparisons with commonly used coupled Sun-to-Earth simulations are also conducted to further validate and assess the Sun-to-Earth model COCONUT. The results show that the time-evolving implicit MHD modelling approach yields noticeable differences compared to oversimplified steady-state simulations, and is efficient enough for practical applications. Modelling the solar corona and wind using a single MHD model simplifies the modelling pipeline and avoids uncertainties associated with coupling different coronal and IH models. The noticeable differences in the temporal evolution of plasma parameters at the L1 and L5 points highlight the need to use continuously evolving, synchronised magnetic field observations to improve global coronal and solar wind simulations, whereas the overall consistent evolutionary trend reveals the reliability of using L5 observations to forecast solar wind conditions near Earth about four days in advance.

astro-ph.SR↗

COCONUT: A coronal model with an energy decomposition strategy

In this paper, we propose an energy decomposition method combined with an HLL Riemann solver that includes an additional dissipation term in the energy equation to improve the numerical stability of the fully implicit, time-evolving coronal model COCONUT and extend its applicability to solar-maximum phases. In MHD simulations that evolve conservative variables in time, the thermal pressure is typically computed by subtracting the magnetic and kinetic energies from the total energy. In low-beta (the ratio of thermal to magnetic pressure; $< 10^{-3}$) regions, discretization errors of magnetic energy can be comparable to the thermal pressure, potentially leading to negative thermal pressure and causing the simulation to crash. Therefore, we update the decomposed energy, excluding the magnetic energy, at each time step. It avoids subtracting a large magnetic energy from the total energy to obtain a very small thermal pressure in low-$β$ regions, thereby improving the numerical stability of MHD models. We validate the algorithm using a time-evolving solar-maximum Carrington rotation simulation in 2025, which the previous code failed to run to completion. We also perform quasi-steady-state coronal simulations and 2D benchmark tests to further assess the algorithm's performance. The simulation results show that the algorithm produces results nearly identical to those obtained using the traditional full energy equation during solar minimum, while significantly improving COCONUT's ability to simulate coronal evolution under strong magnetic fields, even including fields exceeding 100 Gauss with $β<10^{-3}$. This method provides a promising approach for performing quasi-realistic coronal simulations during solar maxima.

astro-ph.SR↗

Time-evolving coronal modelling of the solar maximum around the solar storms in May 2024 by COCONUT

Time-evolving MHD coronal models deliver more realistic results than traditional quasi-steady-state models. The fully implicit time-evolving coronal model COCONUT performs efficiently enough for real-time coronal simulations during solar minimum. However, during solar maxima, the coronal magnetic field is more complex and stronger, and coronal structures evolve more rapidly than during solar minima. Time-evolving MHD coronal modelling of solar maxima often struggles with poor numerical stability and low computational efficiency. We enhanced the numerical stability of the time-evolving coronal model COCONUT to mitigate these issues with the aim to evaluate the differences between the time-evolving and quasi-steady-state coronal simulation results, and to assess the impact of the spatial resolution on global MHD coronal modelling of solar maxima. After enhancing the positivity-preserving property of COCONUT, we employed it to simulate the evolution of coronal structures within 0.1 AU in an inertial coordinate system over two CRs around the solar storms in May 2024. These simulations were performed on unstructured geodesic meshes containing 6.06, 1.52, and 0.38 M cells. We also conducted a quasi-steady-state coronal simulation that treated the solar surface as a rigidly rotating spherical shell. A comparison with observations further validated the reliability of the time-evolving coronal modelling technique. It shows that incorporating the evolution of the magnetic field on the solar surface can significantly improve the fidelity of global MHD coronal simulations around a solar maximum. A simulated magnetic field strength using a mesh with 6.06 M cells can be stronger by more than 40% than that in a mesh with 0.38 M cells. The fully implicit time-evolving model COCONUT shows promise for accurately conducting real-time global coronal simulations of solar maxima.

astro-ph.SR↗

On energy consistency of intermediate states in HLL-type MHD Riemann solvers

Approximate Riemann solvers are widely used for solving hyperbolic conservation laws, including those of magnetohydrodynamics (MHD). However, due to the nonlinearity and complexity of MHD, obtaining accurate and robust numerical solutions to MHD equations is non-trivial, and it may be challenging for an approximate MHD Riemann solver to preserve the positivity of scalar variables, particularly when the plasma \b{eta} is low. As we have identified that the inconsistency between the numerically calculated magnetic field and magnetic energy may be at least partly responsible for the loss of positivity of scalar variables, we propose a consistency condition for calculating the intermediate energies within the Riemann fan and implement it in HLL-type MHD Riemann solvers, thereby alleviating erroneous magnetic field solutions that break scalar positivity. In addition, (I) for the HLLC-type scheme, we have designed a revised two-state approximation, specifically reducing numerical error in magnetic field solutions, although sacrificing the contact-resolving capability, and (II) for the HLLD-type scheme, we replace the constant total pressure assumption by a three-state assumption for the intermediate thermal energy, which is more consistent with our other assumptions. The proposed schemes perform better in numerical examples with low plasma \b{eta}. Moreover, we explained the energy error introduced during time integration.

physics.flu-dyn↗

Total solar eclipse 2024 modelling with COCONUT

Coronal modelling is crucial for a better understanding of solar and helio-physics. Due to the strong brightness of the Sun and the lack of white light observations of the solar atmosphere and low corona (1-1.5R$_\odot$), total solar eclipses have become a standard approach for validating the coronal models. In this study, we validate the COCONUT coronal model by predicting the coronal configuration during the total solar eclipse on April 8, 2024. We aim to predict the accurate configuration of the solar corona during the total solar eclipse on April 8, 2024. We utilise the full 3D MHD model to reconstruct the solar corona from the solar surface to $30\;R_\odot$. The upcoming total solar eclipse predictions were conducted in three different regimes: quasi-steady driving of the inner boundary conditions (BCs) with a daily cadence and dynamic driving of the inner BCs with both daily and hourly cadences. The results from all the simulations are compared to the total solar eclipse images. Additionally, the synthetic white-light (WL) images are generated from the STEREO-A field of view and compared to COR2 observed images. Normalised polarised brightness is compared in the COR2 and synthetic WL images. The predicted solar corona does not vary significantly in the first half of the prediction window. The dynamic simulations yielded better results than the quasi-steady predictions. The west limb was reconstructed better in the simulations than the east limb. We have predicted the total solar eclipse coronal configuration 18 days before the total solar eclipse. We can conclude that the dynamic simulations produced more accurate predictions. The availability of comprehensive observations is crucial, as the emergence of the active region on the east limb made it difficult to accurately predict the east limb coronal configuration due to incorrect input of magnetic field data.

astro-ph.SR↗

SIP-IFVM: An observation-based magnetohydrodynamic model of coronal mass ejection

Currently, achieving a balance between computational efficiency, accuracy, and numerical stability in CME simulations, particularly in the sub-Alfv{'e}nic coronal region, remains a significant challenge. This paper aims to address the challenge by integrating observational data and developing advanced numerical algorithms, focusing on reproducing large-scale CME evolutions that are consistent with observations in the coronal region. Based on the recently developed fully implicit thermodynamic MHD coronal model (Wang et al. 2025a), we further use an observation-based RBSL flux rope to trigger a CME event during CR 2111. Additionally, we improve the temporal accuracy using a 2nd-order accurate ESDIRK2 method, with the intermediate stage solutions computed by the 2nd-order accurate BDF2 pseudo-time marching method. To enhance the numerical stability of ESDIRK2, we apply approximate linearisation in the implicitly solved intermediate stages. Furthermore, we adjust the time-evolving magnetic field B1 to zero at the end of each physical time step to further validate the extended magnetic field decomposition approach proposed by (Wang et al. 2025a). It is noticed that the model successfully reproduces the CME evolution consistent with white-light coronagraph observations, enables faster-than-real-time CME propagation simulations from solar surface to 0.1 AU using only a few dozen CPU cores on approximately 1 million grid cells, and remains numerically stable in CME simulations involving low-\b{eta} regions. The simulation results show that this novel MHD coronal model, combined with an observation-based magnetic flux rope, is sufficiently numerically stable and computationally efficient to reproduce real CME events propagating through the sub-Alfv{é}nic coronal region. Thus, the observation-based CME model is well suited for practical applications in daily space weather forecasting.

astro-ph.SR↗

SIP-IFVM: A time-evolving coronal model with an extended magnetic field decomposition strategy

Time-evolving magnetohydrodynamic (MHD) coronal modeling, driven by a series of time-dependent photospheric magnetograms, represents a new generation of coronal simulations. This approach offers greater realism compared to traditional coronal models constrained by a static magnetogram. However, its practical application is seriously limited by low computational efficiency and poor numerical stability. Therefore, we propose an extended magnetic field decomposition strategy and implement it in the implicit MHD model to develop a coronal model that is both efficient and numerically stable enough for simulating the long-term evolutions of the global corona. The traditional decomposition strategies split the magnetic field into a time-invariant potential field and a time-dependent component $\mathbf{B}_1$. It works well for quasi-steady-state coronal simulations where $\left|\mathbf{B}_1\right|$ is typically small. However, as the inner-boundary magnetic field evolves, $\left|\mathbf{B}_1\right|$ can grow significantly larger and its discretization errors often lead to nonphysical negative thermal pressure, ultimately causing the code to crash. In this paper, we mitigate such undesired situations by introducing a temporally piecewise-constant variable to accommodate part of the non-potential field and remain $\left|\mathbf{B}_1\right|$ consistently small throughout the simulations. We incorporate this novel magnetic field decomposition strategy into our implicit MHD coronal model and apply it to simulate the evolution of coronal structures within 0.1 AU over two solar-maximum Carrington rotations. The results show that this coronal model effectively captures observations and performs more than 80 times faster than real time using only 192 CPU cores, making it well-suited for practical applications in simulating the time-evolving corona.

astro-ph.SR↗

Efficient magnetohydrodynamic modelling of the time-evolving corona by COCONUT

Compared to quasi-steady-state corona models that are constrained by a time-invariant magnetogram over a CR period, time-evolving corona models driven by time-varying photospheric magnetograms are more realistic and can maintain more useful information to accurately describe solar wind evolution and forecast CME propagation. This paper demonstrate that time-evolving corona simulations can be performed efficiently and accurately using an implicit method with relatively large time steps. We also evaluate differences between coronal structures captured by time-evolving and quasi-steady simulations over a CR period during solar minimum. We used a series of hourly updated photospheric magnetograms to drive the evolution of coronal structures from the solar surface to $25\; R_s$ during two CRs around the 2019 eclipse in an inertial coordinate system. We compare the time-evolving and quasi-steady simulations to demonstrate that the differences in these two types of coronal modelling can be obvious even for a solar minimum. The relative differences in radial velocity and density can be over $15 \%$ and $25 \%$ at 20$\;R_s$ during one CR period. We also evaluated the impact of time steps on the simulation results. Using a time step of approximately 10 minutes balances efficiency and necessary numerical stability and accuracy for time-evolving corona simulations around solar minima, with coronal evolution during a full CR simulated within only 9 hours (using 1080 CPU cores for 1.5M grid cells). The simulation results demonstrate that time-evolving MHD coronal simulations can be performed efficiently and accurately using an implicit method, offering a more realistic alternative to quasi-steady-state simulations. The fully implicit time-evolving corona model thus promises to simulate the time-evolving corona accurately in practical space weather forecasting.

astro-ph.SR↗

Constraining the inner boundaries of COCONUT through plasma \b{eta} and Alfvén speed

Space weather modelling has been gaining importance due to our increasing dependency on technology sensitive to space weather effects, such as satellite services, air traffic and power grids. Improving the reliability, accuracy and numerical performance of space weather modelling tools, including global coronal models, is essential to develop timely and accurate forecasts and to help partly mitigate the space weather threat. Global corona models, however, require accurate boundary conditions, for the formulations of which we have very limited observational data. Unsuitable boundary condition prescriptions may lead to inconsistent features in the solution flow field and spoil the code's accuracy and performance. In this paper, we develop an adjustment to the inner boundary condition of the COCONUT global corona model to better capture the dynamics over and around the regions of stronger magnetic fields by constraining the plasma \b{eta} and the Alfvén speed. Using data from solar observations and solar atmospheric modelling codes such as Bifrost, we find that the baseline homogeneous boundary condition formulations for pressure and density do not capture the plasma conditions physically accurately. We develop a method to adjust these prescribed pressure and density values by placing constraints on the plasma \b{eta} and the Alfvén speed that act as proxies. We demonstrate that we can remove inexplicable fast streams from the solution by constraining the maximum Alfvén speed and the minimum plasma \b{eta} on the boundary surface. We also show that the magnetic topology is not significantly affected by this treatment otherwise. The presented technique shows the potential to ease the modelling of solar maxima, especially removing inexplicable features while, at the same time, not significantly affecting the magnetic field topology around the affected regions.

physics.space-ph↗

The operationally ready full three-dimensional magnetohydrodynamic (3D MHD) model from the Sun to Earth: COCONUT+Icarus

Solar wind modelling has become a crucial area of study due to the increased dependence of modern society on technology, navigation, and power systems. Accurate space weather forecasts can predict upcoming threats to Earth's geospace. In this study, we examine a novel full magnetohydrodynamic (MHD) chain from the Sun to Earth. The goal of this study is to demonstrate the capabilities of the full MHD modelling chain from the Sun to Earth by finalising the implementation of the full MHD coronal model into the COolfluid COroNa UnsTructured (COCONUT) model and coupling it to the MHD heliospheric model Icarus. The resulting coronal model has significant advantages compared to the pre-existing polytropic alternative, as it models a more realistic bi-modal wind, which is crucial for heliospheric studies. In this study, only thermal conduction, radiative losses, and approximated coronal heating function were considered in the energy equation. A realistic specific heat ratio was applied. The output of the coronal model was used to onset the 3D MHD heliospheric model Icarus. A minimum solar activity case was chosen as the first test case for the full MHD model. The numerically simulated data in the corona and the heliosphere were compared to observational products. We present a first attempt to obtain the full MHD chain from the Sun to Earth with COCONUT and Icarus. The coronal model has been upgraded to a full MHD model for a realistic bi-modal solar wind configuration. The approximated heating functions have modelled the wind reasonably well, but simple approximations are not enough to obtain a realistic density-speed balance or realistic features in the low corona and farther, near the outer boundary. The full MHD model was computed in 1.06 h on 180 cores of the Genius cluster of the Vlaams Supercomputing Center, which is only 1.8 times longer than the polytropic simulation.

astro-ph.SR↗

COCONUT-MF: Two-fluid ion-neutral global coronal modelling

The global coronal model COCONUT was originally developed to replace models such as the WSA model in space weather forecasting to improve the physical accuracy of the predictions. This model has, however, several simplifications implemented in its formulation to allow for rapid convergence, one of which includes a single-fluid treatment. In this paper, we have two goals. Firstly, we aim to introduce a novel multi-fluid global coronal model and validate it with simple cases as well as with real data-driven applications. Secondly, we aim to investigate to what extent considering a single-fluid plasma in the global coronal model might affect the resulting plasma dynamics, and thus whether the assumptions on which the single-fluid coronal model is based are justified. We developed a multi-fluid global coronal model, COCONUT-MF, which resolves the ion and neutral fluid equations separately. While this model is still steady-state and thus does not resolve unsteady processes, it can account for charge exchange, chemical and collisional contributions. We present the results of the ion-neutral modelling for a dipole, a minimum of solar activity, and a solar maximum. We demonstrate the higher accuracy of the applied AUSM+ scheme compared to HLL. Subsequently, we also evaluate the effects of the considered ion-neutral coupling terms on the resulting plasma dynamics. Despite the very low concentration of neutrals, these terms still affect the flow field to a limited but non-negligible extent (up to 5 to 10% locally). Even though the coronal plasma is generally assumed to be collisionless, our results show that there is sufficient collisionality in it to couple the two fluids. Follow-up work will include extension of the model to lower atmospheric layers of the Sun and inclusion of more advanced physical terms such as heating and radiation.

astro-ph.SR↗

The role of plasma beta in global coronal models: Bringing balance back to the force

COCONUT is a global coronal magnetohydrodynamic model recently developed. In order to achieve robustness and fast convergence to steady-state, several assumptions have been made during its development, such as prescribing filtered photospheric magnetic maps for representing the magnetic field in the lower corona. This filtering leads to smoothing and lower magnetic field values at the inner boundary, resulting in an unrealistically high plasma beta.In this paper, we examine the effects of prescribing such filtered magnetograms and formulate a method for achieving more realistic plasma beta values without losing computational performance. We demonstrate the effects of the highly pre-processed magnetic maps and the resulting high plasma beta on the features in the domain. Then, in our new approach, we shift the inner boundary to 2 Rs and preserve the prescribed highly filtered magnetic map. This effectively reduces the prescribed plasma beta and leads to a more realistic setup. The method is applied on a magnetic dipole, a minimum (2008) and a maximum (2012) solar activity case, to demonstrate its effects. The results obtained with the proposed approach show significant improvements in the resolved density and radial velocity profiles, and far more realistic values of the plasma \{beta} at the boundary and inside the computational domain. This is also demonstrated via synthetic white light imaging and with the validation against tomography. The computational performance comparison shows similar convergence to a limit residual on the same grid when compared to the original setup. Considering that the grid can be further coarsened with this new setup, the operational performance can be additionally increased if needed. The newly developed method is thus deemed as a good potential replacement of the original setup for operational purposes.

astro-ph.SR↗

Assessing inner boundary conditions for global coronal modeling of solar maxima

Computational Fluid Dynamics (CFD)-based global solar coronal simulations are slowly making their way into the space weather modeling toolchains to replace the semi-empirical methods such as the Wang-Sheeley-Arge (WSA) model. However, since they are based on CFD, if the assumptions in them are too strong, these codes might experience issues with convergence and unphysical solutions. Particularly the magnetograms corresponding to solar maxima can pose problems as they contain active regions with strong magnetic fields, resulting in large gradients. Combined with the approximate way in which the inner boundary is often treated, this can lead to non-physical features or even a complete divergence of the simulation in these cases. Here, we show some of the possible approaches to handle this inner boundary in our global coronal model COolfluid COrona uNstrUcTured (COCONUT) in a way that improves both convergence and accuracy. Since we know that prescribing the photospheric magnetic field for a region that represents the lower corona is not entirely physical, first, we look at the ways in which we can adjust the input magnetograms to remove the highest magnitudes and gradients. Secondly, since in the default setup we also assume a constant density, here we experiment with changing these values locally and globally to see the effect on the results. We conclude, through comparison with observations and convergence analysis, that modifying the density locally in active regions is the best way to improve the performance both in terms of convergence and physical accuracy from the tested approaches.

astro-ph.SR↗