arXiv subjects

Andrea Camposeo

Publications and source records attributed to Andrea Camposeo.

At least 19 recordsLinked to original sources

arXiv2025

Statistical Insight into the Correlation of Geometry and Spectral Emission in Network Lasers

Optically active networks show feature-rich emission that depends on the fine details of their geometry, and find diverse applications in random lasers, sensing devices and photonics processors. In these and other systems, a thorough and predictive characterization of how the network geometry correlates with the resulting emission spectrum would be highly important, however such outright description is still lacking. In this work, we take a step toward filling this gap, by using the well-known Steady-State ab Initio Laser Theory equations to carry out an extensive set of statistical analyses and establish connections between the random network geometry and their ultimate emission spectrum. Our results show that edge crowding (abundance of short edges in the network) is key to tune the uniformity of the modal intensity distribution of the emission spectrum. A statistical framework for the comprehensive understanding of the network statistical properties is highly significant to establish precise design rules for network-based photonic devices and intelligent systems.

physics.optics↗

arXiv2025

Coherent absorption reveals colors hidden in a grey Fabry-P\'erot cavity

Thin dielectric films are known to show distinct colors, responsible for the iridescence of various natural and artificial objects such as insect wings and soap bubbles. In the present article we show that a specialized thin film Fabry-P\'erot resonator, that we name conductor-dielectric-conductor (CDC) matched cavity, appears instead completely grey when observed under ordinary conditions (i.e. by analyzing the transmitted or reflected incoherent white light). Nonetheless, the matched CDC cavity still retains spectral information, that clearly appear when the cavity is analyzed by the coherent absorption technique. The CDC system is simply a dielectric thin film sandwiched by two conducting interfaces, whose conductivity shall be appropriately matched depending upon the dielectric refractive index. In practical applications, the ideal conducting interfaces can be safely replaced by thin metal films, making the system easily applicable in particular for cryptographic purposes. We indeed demonstrated experimentally that a visually recognizable thin-film color pattern can be concealed to an ordinary observer, and finally recovered through a dedicated coherent absorption decoding apparatus.

physics.optics↗

arXiv2025

Unusual Red Light Emission from Nonmetallic Cu$_2$Te Microdisk for Laser and SERS Applications

Physical characteristics of Cu$_2$Te are poorly investigated due to limited Te sources available and unclear atomic positions of crystal structure. Herein, hexagonal Cu$_2$Te microdisks are successfully prepared via chemical vapor deposition procedure using GaTe as Te source. The epitaxial growth mechanism of the Cu$_2$Te hexagonal structures with the orthorhombic phase are rationalized by proposed layer-over-layer growth model. The photoluminescence (PL) spectrum of Cu$_2$Te microdisks shows a new red emission band in addition to usual infrared light emission due to Cu deficiency. Single Cu$_2$Te microdisk operates as an optical microcavity supporting whispering gallery modes for red lasing around 627.5 nm. This Cu$_2$Te microdisk microcavity exhibits a high quality factor of 1568 and a low lasing threshold of 125 kW cm$^{-2}$ at room temperature. Meanwhile, Cu$_2$Te microdisks have been exhibited as an ideal platform for surface enhanced Raman scattering (SERS) eliminating drawbacks of noble metal substrates with detection limitation to nanomolar level and an enhancement factor of $\sim$1.95$\times$10$^5$. Hexagonal Cu$_2$Te microdisks turn out to be an efficient microcavity for red lasing and low-cost nonmetallic SERS substrates, opening potential applications in photonics and biological detection of aromatic molecules.

physics.app-ph↗

arXiv2024

Minimal droplet shape representation in experimental microfluidics using Fourier series and autoencoders

We introduce a two-step, fully reversible process designed to project the outer shape of a generic droplet onto a lower-dimensional space. The initial step involves representing the droplet's shape as a Fourier series. Subsequently, the Fourier coefficients are reduced to lower-dimensional vectors by using autoencoder models. The exploitation of the domain knowledge of the droplet shapes allows us to map generic droplet shapes to just 2D space in contrast to previous direct methods involving autoencoders that could map it on minimum 8D space. This 6D reduction in the dimensionality of the droplet's description opens new possibilities for applications, such as automated droplet generation via reinforcement learning, the analysis of droplet shape evolution dynamics and the prediction of droplet breakup. Our findings underscore the benefits of incorporating domain knowledge into autoencoder models, highlighting the potential for increased accuracy in various other scientific disciplines.

physics.flu-dyn↗

arXiv2023

Measuring arrangement and size distributions of flowing droplets in microchannels through deep learning

In microfluidic systems, droplets undergo intricate deformations as they traverse flow-focusing junctions, posing a challenging task for accurate measurement, especially during short transit times. This study investigates the physical behavior of droplets within dense emulsions in diverse microchannel geometries, specifically focusing on the impact of varying opening angles within the primary channel and injection rates of fluid components. Employing a sophisticated droplet tracking tool based on deep-learning techniques, we analyze multiple frames from flow-focusing experiments to quantitatively characterize droplet deformation in terms of ratio between maximum width and height and propensity to form liquid with hexagonal crystalline order. Our findings reveal the existence of an optimal opening angle where shape deformations are minimal and crystal-like arrangement is maximal. Variations of fluid injection rates are also found to affect size and packing fraction of the emulsion in the exit channel. This paper offers insights into deformations, size and structure of fluid emulsions relative to microchannel geometry and other flow-related parameters captured through machine learning, with potential implications for the design of microchips utilized in cellular transport and tissue engineering applications.

physics.flu-dyn↗

arXiv2023

Erbium-doped WS$_2$ with Down- and Up-Conversion Photoluminescence Integrated on Silicon for Heterojunction Infrared Photodetection

The integration of 2D nanomaterials with silicon is expected to enrich the applications of 2D functional nanomaterials and to pave the way for next-generation, nanoscale optoelectronics with enhanced performances. Herein, a strategy for rare earth element doping has been utilized for the synthesis of 2D WS$_2$:Er nanosheets to achieve up-conversion and down-conversion emission ranging from visible to the near-infrared region. Moreover, the potential integration of the synthesized 2D nanosheets in silicon platforms is demonstrated by the realization of an infrared photodetector based on a WS$_2$:Er/Si heterojunction. These devices operate at room temperature and show a high photoresponsivity of ~39.8 mA/W (at 980 nm) and a detectivity of 2.79 $\times$ 10$^{10}$ cm Hz$^{1/2}$ W$^{-1}$. Moreover, the dark current and noise power density are suppressed effectively by van der Waals assisted p-n heterojunction. This work fundamentally contributes to establishing infrared detection by rare element doping of 2D materials in heterojunctions with Si, at the forefront of infrared 2D materials-based photonics.

physics.app-ph↗

arXiv2023

Tuneable optical gain and broadband lasing driven in electrospun polymer fibers by high dye concentration

The optical gain of blue light-emitting electrospun polystyrene fibers doped with a linear multi-fragment molecular dye based on the combination of fluorine-carbazole functional units is investigated, with the aim of correlating emission properties and the specific material architecture made of either aligned or disordered fibers. Enhanced performance is found in aligned fibers, whose gain spectrum can be finely tuned by varying the dye concentration. Instead, randomly oriented fibers show a manifold spectral line narrowing, resulting in sharp laser peaks superimposed on top of a broad emission band, ascribable to random lasing. In these systems, the increase of the dye content turns out to be effective for both decreasing the lasing threshold by about a factor 6 and for varying the laser emission wavelength. These results make these arrays and disordered architectures of fibers valuable active media for variable-gain, broadband lasing, which is remarkably important in optical sensing and tunable microlaser devices.

physics.optics↗

arXiv2023

Benchmarking YOLOv5 and YOLOv7 models with DeepSORT for droplet tracking applications

Tracking droplets in microfluidics is a challenging task. The difficulty arises in choosing a tool to analyze general microfluidic videos to infer physical quantities. The state-of-the-art object detector algorithm You Only Look Once (YOLO) and the object tracking algorithm Simple Online and Realtime Tracking with a Deep Association Metric (DeepSORT) are customizable for droplet identification and tracking. The customization includes training YOLO and DeepSORT networks to identify and track the objects of interest. We trained several YOLOv5 and YOLOv7 models and the DeepSORT network for droplet identification and tracking from microfluidic experimental videos. We compare the performance of the droplet tracking applications with YOLOv5 and YOLOv7 in terms of training time and time to analyze a given video across various hardware configurations. Despite the latest YOLOv7 being 10% faster, the real-time tracking is only achieved by lighter YOLO models on RTX 3070 Ti GPU machine due to additional significant droplet tracking costs arising from the DeepSORT algorithm. This work is a benchmark study for the YOLOv5 and YOLOv7 networks with DeepSORT in terms of the training time and inference time for a custom dataset of microfluidic droplets.

cs.CV↗

arXiv2022

Energy Dissipation and Asymmetric Excitation in Hybrid Waveguides for Routing and Coloring

The delivery of optical signals from an external light source to a nanoscale waveguide is highly important for the development of nanophotonic circuits. However, the efficient coupling of external light energy into nanophotonic components is difficult and still remains a challenge. Herein, we use an external silica nanofiber to light up an organic-inorganic hybrid nano-waveguide, namely a system composed of a polymer filament doped with MoS$_{2}$ quantum dots. Nanofiber-excited nano-waveguides in a crossed geometry are found to asymmetrically couple excitation signals along two opposite directions, with different energy dissipation resulting in different colors of the light emitted by MoS$_{2}$ quantum dots and collected from the waveguide terminals. Interestingly, rainbow-like light in the hybrid waveguide is achieved by three-in-one mixing of red, green, and blue components. This hetero-dimensional system of dots-in-waveguide represents a significant advance towards all-optical routing and full-color display in integrated nanophotonic devices.

physics.optics↗

arXiv2022

Impact of size effects on photopolymerization and its optical monitoring in-situ

Photopolymerization processes are exploited in light exposure-based 3D printing technologies, where either a focused laser beam or a patterned light sheet allows layers of a UV curable, liquid pre-polymer to be solidified. Here we focus on the crucial, though often neglected, role of the layer thickness on photopolymerization. The temporal evolution of polymerization reactions occurring in droplets of acrylate-based oligomers and in photoresist films with varied thickness is investigated by means of an optical system, which is specifically designed for in-situ and real-time monitoring. The time needed for complete curing is found to increase as the polymerization volume is decreased below a characteristic threshold that depends on the specific reaction pathway. This behavior is rationalized by modelling the process through a size-dependent polymerization rate. Our study highlights that the formation of photopolymerized networks might be affected by the involved volumes regardless of the specific curing mechanisms, which could play a crucial role in optimizing photocuring-based additive manufacturing.

cond-mat.soft↗

arXiv2022

Cryptographic Strain-Dependent Light Pattern Generators

Refractive freeform components are becoming increasingly relevant for generating controlled patterns of light, because of their capability to spatially-modulate optical signals with high efficiency and low background. However, the use of these devices is still limited by difficulties in manufacturing macroscopic elements with complex, 3-dimensional (3D) surface reliefs. Here, 3D-printed and stretchable magic windows generating light patterns by refraction are introduced. The shape and, consequently, the light texture achieved can be changed through controlled device strain. Cryptographic magic windows are demonstrated through exemplary light patterns, including micro-QR-codes, that are correctly projected and recognized upon strain gating while remaining cryptic for as-produced devices. The light pattern of micro-QR-codes can also be projected by two coupled magic windows, with one of them acting as the decryption key. Such novel, freeform elements with 3D shape and tailored functionalities is relevant for applications in illumination design, smart labels, anti-counterfeiting systems, and cryptographic communication.

physics.optics↗

arXiv2022

Sensitivity and spectral control of network lasers

Recently, random lasing in complex networks has shown efficient lasing over more than 50 localised modes, promoted by multiple scattering over the underlying graph. If controlled, these network lasers can lead to fast-switching multifunctional light sources with synthesised spectrum. Here, we observe both in experiment and theory high sensitivity of the network laser to the spatial shape of the pump profile, with mode intensity variation of up to 280% for a non-homogeneous 7% pump decrease. We solve the nonlinear equations within the steady state ab-initio laser theory (SALT) approximation over a graph and we show selective lasing of around 90% of the top modes, effectively programming the spectrum of the lasing networks. In our experiments with polymer networks, this high sensitivity enables control of the lasing spectrum through non-uniform pump patterns. We propose the underlying complexity of the network modes as the key element behind efficient spectral control opening the way for the development of optical devices with wide impact for on-chip photonics for communication, sensing and computation.

physics.optics↗

arXiv2022

Heterogeneous Random Laser with Switching Activity Visualized by Replica Symmetry Breaking Maps

In the past decade, complex networks of light emitters are proposed as novel platforms for photonic circuits and lab-on-chip active devices. Lasing networks made by connected multiple gain components and graphs of nanoscale random lasers (RLs) obtained from complex meshes of polymeric nanofibers are successful prototypes. However, in the reported research, mainly collective emission from a whole network of resonators is investigated, and only in a few cases, the emission from single points showing, although homogeneous and broad, spatial emission. In all cases, simultaneous activation of the miniaturized lasers is observed. Here, differently, we realize heterogeneous random lasers made of ribbon-like and highly porous fibers with evident RL action from separated micrometric domains that alternatively switch on and off by tuning the pumping light intensity. We visualize this novel effect by building for the first time replica symmetry breaking (RSB) maps of the emitting fibers with 2 {\mu}m spatial resolution. In addition, we calculate the spatial correlations of the laser regions showing clearly an average extension of 50 {\mu}m. The observed blinking effect is due to mode interaction along light guiding fibers and opens new avenues in the fabrication of flexible photonic networks with specific and adaptable activity.

physics.optics↗

arXiv2020

Naturally-Degradable Photonic Devices with Transient Function by Heterostructured Waxy-Sublimating and Water-Soluble Materials

Combined dry-wet transient materials and devices are introduced, which are based on water-dissolvable dye-doped polymers layered onto non-polar cyclic hydrocarbon sublimating substrates. Light-emitting heterostructures showing amplified spontaneous emission are used as illumination sources for speckle-free, full-field imaging, and transient optical labels are realized that incorporate QR codes with stably encoded information. The transient behavior is also studied at the microscopic scale, highlighting the real time evolution of material domains in the sublimating compound. Finally, the exhausted components are fully soluble in water thus being naturally degradable.

cond-mat.mtrl-sci↗

arXiv2020

Dye stabilization and wavelength tunability in lasing fibers based on DNA

Lasers based on biological materials are attracting an increasing interest in view of their use in integrated and transient photonics. DNA as optical biopolymer in combination with highly-emissive dyes has been reported to have excellent potential in this respect, however achieving miniaturized lasing systems based on solid-state DNA shaped in different geometries to confine and enhance emission is still a challenge, and physico-chemical mechanisms originating fluorescence enhancement are not fully understood. Herein, a class of wavelength-tunable lasers based on DNA nanofibers is demonstrated, for which optical properties are highly controlled through the system morphology. A synergistic effect is highlighted at the basis of lasing action. Through a quantum chemical investigation, we show that the interaction of DNA with the encapsulated dye leads to hindered twisting and suppressed channels for the non-radiative decay. This is combined with effective waveguiding, optical gain, and tailored mode confinement to promote morphologically-controlled lasing in DNA-based nanofibers. The results establish design rules for the development of bright and tunable nanolasers and optical networks based on DNA nanostructures.

physics.optics↗

arXiv2020

Synthesis, crystal structure, polymorphism and microscopic luminescence properties of anthracene derivative compounds

Anthracene derivative compounds are currently investigated because of their unique physical properties (e.g., bright luminescence and emission tunability), which make them ideal candidates for advanced optoelectronic devices. Intermolecular interactions are the basis of the tunability of the optical and electronic properties of these compounds, whose prediction and exploitation benefit from the knowledge of the crystal structure and the packing architecture. Polymorphism can occur due to the weak intermolecular interactions, asking for detailed structural analysis clarifying the origin of observed material property modifications. Here, two silylethyne-substituted anthracene compounds are characterized by single-crystal synchrotron X-ray diffraction, identifying a new polymorph. Additionally, laser confocal microscopy and fluorescence lifetime imaging microscopy confirm the results obtained by the X-ray diffraction characterization, i.e., shifting the substituents towards the external benzene rings of the anthracene unit favours {\pi}-{\pi} interactions, impacting on both the morphology and the microscopic optical properties of the crystals. The compounds with more isolated anthracene units feature shorter lifetime and emission spectra more similar to those ones of isolated molecules. The crystallographic study, supported by the optical investigation, sheds light on the influence of non-covalent interactions on the crystal packing and luminescence properties of anthracene derivatives, providing a further step towards their efficient use as building blocks in active components of light sources and photonic networks.

cond-mat.mtrl-sci↗

arXiv2020

Conformable nanowire-in-nanofiber hybrids for low-threshold optical gain in the ultraviolet

The miniaturization of diagnostic devices that exploit optical detection schemes requires the design of light-sources combining small size, high performance for effective excitation of chromophores, and mechanical flexibility for easy coupling to components with complex and non-planar shapes. Here, ZnO nanowire-in-fiber hybrids with internal architectural order are introduced, exhibiting a combination of polarized stimulated emission, low propagation losses of light modes, and structural flexibility. Ultrafast transient absorption experiments on the electrospun material show optical gain which gives rise to amplified spontaneous emission, with threshold lower than the value found in films. These systems are highly flexible and can conveniently conform to curved surfaces, which makes them appealing active elements for various device platforms, such as bendable lasers, optical networks and sensors, as well as for application in bioimaging, photo-crosslinking, and optogenetics.

physics.app-ph↗

arXiv2019

Printing Flowers? Custom-tailored Photonic Cellulose Films with Engineered Surface Topography

Wrought by nature's wondrous hand, surface topographies are discovered on all length scales in living creatures and serve a variety of functions. Inspired by floral striations, here we developed a scalable means of fabricating custom-tailored photonic cellulose films that contained both cholesteric organization and microscopic wrinkly surface topography. Free-standing films were prepared by molding cellulose nanocrystal ink onto an oriented wrinkled template through evaporation-assisted nanoimprinting lithography, yielding morphology-induced light scattering at a short wavelength as well as optically tunable structural color derived from the helical cellulose matrix. As a result, the interplay between the two photonic structures, grating-like surface and chiral bulk, led to selective scattering of circularly polarized light with specific handedness. Moreover, the wrinkled surface relief on cholesteric cellulose films could be precisely controlled, enabling engineered printing of microscopic patterned images.

cond-mat.soft↗