arXiv subjects

Americo Cunha Jr

Publications and source records attributed to Americo Cunha Jr.

At least 19 recordsLinked to original sources

arXiv2026

Robust topology optimization with non-Gaussian material fields using polygonal finite elements

We present a computational framework for robust topology optimization that integrates polygonal finite-element discretizations, spatially correlated non-Gaussian material modeling, and non-intrusive polynomial-chaos surrogates. Spatial uncertainty in Young's modulus is represented as a homogeneous non-Gaussian random field obtained via a memoryless transformation of a truncated Karhunen-Lo\`eve expansion, ensuring physical admissibility through positivity of stiffness while preserving the prescribed autocovariance. Polygonal finite elements provide a stable discretization for density-based optimization on unstructured meshes and mitigate checkerboard artefacts and mesh bias, while the sparse polynomial-chaos expansion enables efficient estimation of low-order statistical moments required by the robust objective at a fraction of the cost of intrusive or Monte Carlo approaches. Numerical studies on a cantilever and a curved beam show that introducing non-Gaussian material variability leads to systematic load-path redistribution and a reallocation of 6-12% of the structural volume, together with a reduction in compliance scatter. The non-intrusive surrogate reproduces intrusive reference results within 3% using an order of magnitude fewer full finite-element analyses. These results demonstrate that the proposed framework offers a physically consistent and computationally efficient route to topology-optimized designs that remain reliable under realistic material uncertainty.

cs.CE↗

arXiv2026

Scenario-driven optimization of passive vehicle suspensions: explaining the effectiveness of asymmetric damping

Asymmetric damping is widely used in passive vehicle suspensions, with rebound damping often recommended to exceed compression damping by a factor of two to three. Despite its prevalence, this guideline remains largely empirical and lacks a systematic derivation based on vehicle dynamics and excitation conditions. This paper presents a scenario-driven optimization framework that provides a principled explanation for the effectiveness of asymmetric damping. A minimal quarter-car model is employed to isolate the key mechanisms governing the trade-off between ride comfort, road holding, and transient response, using standardized ISO~8608 road excitations. Rebound and compression damping ratios are treated as independent design variables, and optimal configurations are identified via a stochastic Cross-Entropy algorithm applied to a non-convex, simulation-based objective function. Performance is assessed through ISO~2631 weighted RMS acceleration, tire--ground contact force variability, and settling time. The results show that symmetric damping is often sufficient under moderate excitation, whereas asymmetric damping becomes necessary under severe conditions, with commonly cited rebound-to-compression ratios emerging as scenario-dependent near-optimal solutions rather than universal constants.

cs.CE↗

arXiv2025

Advanced creep modelling for polymers: A variable-order fractional calculus approach

Polymer-based plastics exhibit time-dependent deformation under constant stress, known as creep, which can lead to rupture or static fatigue. A common misconception is that materials under tolerable static loads remain unaffected over time. Accurate long-term deformation predictions require experimental creep data, but conventional models based on simple rheological elements like springs and dampers often fall short, lacking the flexibility to capture the power-law behaviour intrinsic to creep processes. The springpot, a fractional calculus-based element, has been used to provide a power-law relationship; however, its fixed-order nature limits its accuracy, particularly when the deformation rate evolves over time. This article introduces a variable-order (VO) springpot model that dynamically adapts to the evolving viscoelastic properties of polymeric materials during creep, capturing changes between glassy, transition and rubbery phases. Model parameters are calibrated using a robust procedure for model identification based on the cross-entropy (CE) method, resulting in physically consistent and accurate predictions. This advanced modelling framework not only overcomes the limitations of the fixed-order models but also establishes a foundation for applying VO mechanics to other viscoelastic materials, providing a valuable tool for predicting long-term material performance in structural applications.

physics.class-ph↗

arXiv2024

A framework for probabilistic prediction of remaining useful life in structural materials

Accurate prediction of remaining useful life under creep conditions is essential for the structural reliability of high-temperature components in critical engineering systems. Traditional approaches based on deterministic parametric models often overlook the substantial variability inherent in experimental data, compromising the accuracy and robustness of long-term predictions. This study introduces a probabilistic framework to quantify uncertainties in creep rupture time prediction. Robust regression techniques are first applied to mitigate the influence of outliers and enhance the stability of model estimates. Global sensitivity analysis using Sobol indices is then employed to identify the dominant contributors to model uncertainty, followed by Monte Carlo simulations to propagate these uncertainties and estimate the distribution of the remaining useful life. Finally, model selection is guided by statistical criteria, including the Akaike and Bayesian information criteria, to identify the most reliable predictive model. The proposed framework not only enables the definition of safe operational limits with quantifiable confidence levels but is also general and extensible to other time-dependent degradation phenomena, such as fatigue and creep-fatigue interaction.

cs.CE↗

arXiv2024

Parametric probabilistic approach for cumulative fatigue damage using double linear damage rule considering limited data

This work proposes a parametric probabilistic approach to model damage accumulation using the double linear damage rule (DLDR) considering the existence of limited experimental fatigue data. A probabilistic version of DLDR is developed in which the joint distribution of the knee-point coordinates is obtained as a function of the joint distribution of the DLDR model input parameters. Considering information extracted from experiments containing a limited number of data points, an uncertainty quantification framework based on the Maximum Entropy Principle and Monte Carlo simulations is proposed to determine the distribution of fatigue life. The proposed approach is validated using fatigue life experiments available in the literature.

cs.CE↗

arXiv2024

Robust optimization and uncertainty quantification in the nonlinear mechanics of an elevator brake system

This paper deals with nonlinear mechanics of an elevator brake system subjected to uncertainties. A deterministic model that relates the braking force with uncertain parameters is deduced from mechanical equilibrium conditions. In order to take into account parameters variabilities, a parametric probabilistic approach is employed. In this stochastic formalism, the uncertain parameters are modeled as random variables, with distributions specified by the maximum entropy principle. The uncertainties are propagated by the Monte Carlo method, which provides a detailed statistical characterization of the response. This work still considers the optimum design of the brake system, formulating and solving nonlinear optimization problems, with and without the uncertainties effects.

cs.CE↗

arXiv2024

Damage detection in an uncertain nonlinear beam based on stochastic Volterra series

The damage detection problem in mechanical systems, using vibration measurements, is commonly called Structural Health Monitoring (SHM). Many tools are able to detect damages by changes in the vibration pattern, mainly, when damages induce nonlinear behavior. However, a more difficult problem is to detect structural variation associated with damage, when the mechanical system has nonlinear behavior even in the reference condition. In these cases, more sophisticated methods are required to detect if the changes in the response are based on some structural variation or changes in the vibration regime, because both can generate nonlinearities. Among the many ways to solve this problem, the use of the Volterra series has several favorable points, because they are a generalization of the linear convolution, allowing the separation of linear and nonlinear contributions by input filtering through the Volterra kernels. On the other hand, the presence of uncertainties in mechanical systems, due to noise, geometric imperfections, manufacturing irregularities, environmental conditions, and others, can also change the responses, becoming more difficult the damage detection procedure. An approach based on a stochastic version of Volterra series is proposed to be used in the detection of a breathing crack in a beam vibrating in a nonlinear regime of motion, even in reference condition (without crack). The system uncertainties are simulated by the variation imposed in the linear stiffness and damping coefficient. The results show, that the nonlinear analysis done, considering the high order Volterra kernels, allows the approach to detect the crack with a small propagation and probability confidence, even in the presence of uncertainties.

cs.CE↗

arXiv2024

Damage detection in an uncertain nonlinear beam based on stochastic Volterra series: an experimental application

The damage detection problem becomes a more difficult task when the intrinsically nonlinear behavior of the structures and the natural data variation are considered in the analysis because both phenomena can be confused with damage if linear and deterministic approaches are implemented. Therefore, this work aims the experimental application of a stochastic version of the Volterra series combined with a novelty detection approach to detect damage in an initially nonlinear system taking into account the measured data variation, caused by the presence of uncertainties. The experimental setup is composed by a cantilever beam operating in a nonlinear regime of motion, even in the healthy condition, induced by the presence of a magnet near to the free extremity. The damage associated with mass changes in a bolted connection (nuts loosed) is detected based on the comparison between linear and nonlinear contributions of the stochastic Volterra kernels in the total response, estimated in the reference and damaged conditions. The experimental measurements were performed on different days to add natural variation to the data measured. The results obtained through the stochastic proposed approach are compared with those obtained by the deterministic version of the Volterra series, showing the advantage of the stochastic model use when we consider the experimental data variation with the capability to detect the presence of the damage with statistical confidence. Besides, the nonlinear metric used presented a higher sensitivity to the occurrence of the damage compared with the linear one, justifying the application of a nonlinear metric when the system exhibits intrinsically nonlinear behavior.

cs.CE↗

arXiv2024

CEopt: A MATLAB Package for Non-convex Optimization with the Cross-Entropy Method

This paper introduces CEopt (https://ceopt.org), a MATLAB tool leveraging the Cross-Entropy method for non-convex optimization. Due to the relative simplicity of the algorithm, it provides a kind of transparent ``gray-box'' optimization solver, with intuitive control parameters. Unique in its approach, CEopt effectively handles both equality and inequality constraints using an augmented Lagrangian method, offering robustness and scalability for moderately sized complex problems. Through select case studies, the package's applicability and effectiveness in various optimization scenarios are showcased, marking CEopt as a practical addition to optimization research and application toolsets.

stat.CO↗

arXiv2023

Probabilistic maps on bistable vibration energy harvesters

This paper analyzes the impact of parametric uncertainties on the dynamics of bistable energy harvesters, focusing on obtaining statistical information about how each parameter's variability affects the energy harvesting process. To model the parametric uncertainties, we use a probability distribution derived from the maximum entropy principle, while polynomial chaos is employed to propagate uncertainty. Conditional probabilities and probability maps are obtained to investigate the effect of uncertainty on harvesting energy. We consider different models of bistable energy harvesters that account for nonlinear piezoelectric coupling and asymmetries. Our findings suggest a higher probability of increasing harvested power in the intrawell motion regime as the excitation frequency increases. In contrast, increasing the excitation amplitude and piezoelectric coupling are more likely to increase power in the chaotic and interwell motion regimes, respectively. An illustrative example is presented to emphasize the importance of investigating the influence when all parameters vary simultaneously.

math.DS↗

arXiv2022

Nonlinear dynamics of asymmetric bistable energy harvesters

The paper investigates asymmetries effects over a nonlinear vibration energy harvester dynamics. The asymmetric system performance is compared with symmetric ones. Different asymmetry levels on restoring force and gravity action are investigated from a system-sloping angle variation. Bifurcation diagrams and basins of attraction are used to examine the local and global characteristics underlying dynamical systems under different excitation energy. The results show the adverse effects of asymmetries on system dynamics. They also reveal ways to overcome them by canceling asymmetric influence from optimal sloping angle values and improving asymmetric system performance over symmetrical ones. This comprehensive numerical study provides novel valuable insights into asymmetrical energy harvester dynamics, a wide and still less explored topic.

math.DS↗

arXiv2022

Uncertainty quantification in mechanistic epidemic models via cross-entropy approximate Bayesian computation

This paper proposes a data-driven approximate Bayesian computation framework for parameter estimation and uncertainty quantification of epidemic models, which incorporates two novelties: (i) the identification of the initial conditions by using plausible dynamic states that are compatible with observational data; (ii) learning of an informative prior distribution for the model parameters via the cross-entropy method. The new methodology's effectiveness is illustrated with the aid of actual data from the COVID-19 epidemic in Rio de Janeiro city in Brazil, employing an ordinary differential equation-based model with a generalized SEIR mechanistic structure that includes time-dependent transmission rate, asymptomatics, and hospitalizations. A minimization problem with two cost terms (number of hospitalizations and deaths) is formulated, and twelve parameters are identified. The calibrated model provides a consistent description of the available data, able to extrapolate forecasts over a few weeks, making the proposed methodology very appealing for real-time epidemic modeling.

stat.AP↗

arXiv2022

On the reduction of nonlinear electromechanical systems

The present work revisits the reduction of the nonlinear dynamics of an electromechanical system through a quasi-steady state hypothesis, discussing the fundamental aspects of this type of approach and clarifying some confusing points found in the literature. Expressions for the characteristic time scales of dynamics are deduced from a physical analysis that establishes an analogy between electromechanical dynamics and the kinetics of a chemical reaction. It provides a physical justification, supplemented by non-dimensionalization and scaling of the equations, to reduce the dynamics of interest by assuming a quasi-steady state for the electrical subsystem, eliminating the inductive term from the electrical equation. Numerical experiments help to illustrate the typical behavior of the electromechanical system, a boundary layer phenomenon near the initial dynamic state, and the validity limits of the electromechanical quasi-steady-state assumption discussed here.

physics.class-ph↗

arXiv2022

The starting dates of COVID-19 multiple waves

The severe acute respiratory syndrome of coronavirus 2 spread globally very quickly, causing great concern at the international level due to the severity of the associated respiratory disease, the so-called COVID-19. Considering Rio de Janeiro city (Brazil) as an example, the first diagnosis of this disease occurred in March 2020, but the exact moment when the local spread of the virus started is uncertain as the Brazilian epidemiological surveillance system was not widely prepared to detect suspected cases of COVID-19 at that time. Improvements in this surveillance system occurred over the pandemic, but due to the complex nature of the disease transmission process, specifying the exact moment of emergence of new community contagion outbreaks is a complicated task. This work aims to propose a general methodology to determine possible start dates for the multiple community outbreaks of COVID-19, using for this purpose a parametric statistical approach that combines surveillance data, nonlinear regression, and information criteria to obtain a statistical model capable of describing the multiple waves of contagion observed. The dynamics of COVID-19 in the city of Rio de Janeiro is taken as a case study, and the results suggest that the original strain of the virus was already circulating in Rio de Janeiro city as early as late February 2020, probably being massively disseminated in the population during the carnival festivities.

q-bio.PE↗

arXiv2021

Effect of an attached end mass in the dynamics of uncertainty nonlinear continuous random system

This work studies the dynamics of a one dimensional elastic bar with random elastic modulus and prescribed boundary conditions, say, fixed at one end, and attached to a lumped mass and two springs (one linear and another nonlinear) on the other extreme. The system analysis assumes that the elastic modulus has gamma probability distribution and uses Monte Carlo simulations to compute the propagation of uncertainty in this continuous--discrete system. After describing the deterministic and the stochastic modeling of the system, some configurations of the model are analyzed in order to characterize the effect of the lumped mass in the overall behavior of this dynamical system.

math.DS↗

arXiv2021

Identification of parameters in the torsional dynamics of a drilling process through Bayesian statistics

This work presents the estimation of the parameters of an experimental setup, which is modeled as a system with three degrees of freedom, composed by a shaft, two rotors, and a DC motor, that emulates a drilling process. A Bayesian technique is used in the estimation process, to take into account the uncertainties and variabilities intrinsic to the measurement taken, which are modeled as a noise of Gaussian nature. With this procedure it is expected to check the reliability of the nominal values of the physical parameters of the test rig. An estimation process assuming that nine parameters of the experimental apparatus are unknown is conducted, and the results show that for some quantities the relative deviation with respect to the nominal values is very high. This deviation evidentiates a strong deficiency in the mathematical model used to describe the dynamic behavior of the experimental apparatus.

stat.ME↗

arXiv2021

Non-intrusive polynomial chaos expansion for topology optimization using polygonal meshes

This paper deals with the applications of stochastic spectral methods for structural topology optimization in the presence of uncertainties. A non-intrusive polynomial chaos expansion is integrated into a topology optimization algorithm to calculate low-order statistical moments of the mechanical-mathematical model response. This procedure, known as robust topology optimization, can optimize the mean of the compliance while simultaneously minimizing its standard deviation. In order to address possible variabilities in the loads applied to the mechanical system of interest, magnitude and direction of the external forces are assumed to be uncertain. In this probabilistic framework, forces are described as a random field or a set of random variables. Representation of the random objects and propagation of load uncertainties through the model are efficiently done through Karhunen-Lo\`{e}ve and polynomial chaos expansions. We take advantage of using polygonal elements, which have been shown to be effective in suppressing checkerboard patterns and reducing mesh dependency in the solution of topology optimization problems. Accuracy and applicability of the proposed methodology are demonstrated by means of several topology optimization examples. The obtained results, which are in excellent agreement with reference solutions computed via Monte Carlo method, show that load uncertainties play an important role in optimal design of structural systems, so that they must be taken into account to ensure a reliable optimization process.

cs.CE↗

arXiv2021

Quantification of parametric uncertainties induced by irregular soil loading in orchard tower sprayer nonlinear dynamics

This paper deals with the nonlinear stochastic dynamics of an orchard tower sprayer subjected to random excitations due to soil irregularities. A consistent stochastic model of uncertainties is constructed to describe random loadings and to predict variabilities in mechanical system response. The dynamics is addressed in time and frequency domains. Monte Carlo method is employed to compute the propagation of uncertainties through the stochastic model. Numerical simulations reveals a very rich dynamics, which is able to produce chaos. This numerical study also indicates that lateral vibrations follow a direct energy cascade law. A probabilistic analysis reveals the possibility of large lateral vibrations during the equipment operation.

cs.CE↗