arXiv subjects

Ali Waqar Azim

Publications and source records attributed to Ali Waqar Azim.

10 recordsLinked to original sources

arXiv2025

A Framework for Geometry-based Statistical Channel Modeling in ISAC Systems

This paper proposes a comprehensive framework for a {geometry-based statistical model for} integrated sensing and communication (ISAC) tailored for bistatic systems. Our dual-component model decomposes the ISAC channel into a target channel encompassing all multipath components produced by a sensing target {parameterized} by the target's radar cross-section and scattering points, and a background channel comprising all other propagation paths that do not interact with the sensing target. The framework extends TR38.901 via a hybrid clustering approach, integrating spatiotemporally consistent deterministic clusters with stochastic clusters to preserve channel reciprocity and absolute delay alignment for sensing parameter estimation. Extensive simulations across {urban macro, urban micro, and indoor factory} scenarios demonstrate that the model maintains communication performance parity with the standard TR38.901, validated through bit-error rate analysis obtained via simulated and measured ISAC channels and channel capacity assessment, while enabling sensing performance evaluation, such as target ranging error for localization and receiver operating characteristic curves for detection probability.

eess.SP↗

arXiv2025

3GPP-Compliant Radar Cross Section Characterization of Indoor Factory Targets

The following paper presents a systematic 3rd Generation Partnership Project (3GPP)-compliant characterization of radar cross section (RCS) for indoor factory (InF) objects, including small and mid-sized unmanned aerial vehicles (UAVs), robotic arms, and automated guided vehicles (AGVs). Through measurements in the 25-28 GHz range, we validate the 3GPP standardized log-normal distribution model for RCS for above-mentioned target objects. The 3GPP-complaint RCS parameters obtained for the small-sized UAV are in close agreement (<1 dB deviation) with 3GPP agreed values. The mid-sized UAVs exhibit higher reflectivity compared to the small-sized UAV due to enhanced specular components attributed to material and lithium-ion battery packs. The robotic arm exhibits dynamic RCS behavior due to mechanical articulation, whereas UAVs show clear size-dependent reflectivity patterns in AGVs. Our findings provide empirical validation for RCS characterization for integrated sensing and communication channel modeling in InF environments.

eess.SP↗

arXiv2025

Statistical and Deterministic RCS Characterization for ISAC Channel Modeling

In this study, we perform a statistical analysis of the radar cross section (RCS) for various test targets in an indoor factory at \(25\)-\(28\) GHz, with the goal of formulating parameters that may be used for target identification and other sensing applications for future wireless systems. The analysis is conducted based on measurements in monostatic and bistatic configurations for bistatic angles of \(20^\circ\), \(40^\circ\), and \(60^\circ\), which are functions of transmitter-receiver (T-R) and target positions, via accurate \(3\)dB beamwidth of \(10^\circ\) in both azimuth and elevation planes. The test targets include unmanned aerial vehicles, an autonomous mobile robot, and a robotic arm. We utilize parametric statistical distributions to fit the measured RCS data. The analysis reveals that the \textit{lognormal and gamma distributions} are effective in modeling the RCS of the test targets over different reflecting points of the target itself, i.e. when target is in motion. Additionally, we provide a framework for evaluating the deterministic bistatic RCS of a rectangular sheet of laminated wood, due to its widespread use in indoor hotspot environments. Novel deterministic and statistical RCS models are evaluated, incorporating dependencies on the bistatic angle, T-R distance (\(2\)m -\(10\)m) and the target. The results demonstrate that some proposed RCS models accurately fit the measured data, highlighting their applicability in bistatic configurations.

eess.SP↗

arXiv2024

Indoor Statistical and Deterministic RCS Characterization for ISAC Channel Modeling

In this study, we perform statistical radar cross section (RCS) analysis for various test targets in an indoor factory at \SI{25}{}-\SI{28}{\GHz}, with the goal of determining the best-fit parametric distributions that characterize the target scattering properties to be used in integrated sensing and communication channel modeling standardization. The analysis is conducted based on measurements in quasi-monostatic and bistatic configurations with bistatic angles of \(20^\circ\), \(40^\circ\), and \(60^\circ\). The test targets include unmanned aerial vehicles, an autonomous mobile robot, and a robotic arm. Goodness-of-fit tests validate that the RCS of these targets is best modeled by \textit{lognormal} and \textit{gamma} distributions with high statistical confidence. Additionally, we provide a framework for evaluating the \ac{NF}, specular-dominant effective bistatic RCS of a rectangular sheet under controlled bistatic geometries. Novel deterministic RCS models are evaluated, incorporating dependencies on the bistatic angle, transmitter-target separation (\SIrange{2}{10}{\meter}). The results demonstrate that some proposed deterministic RCS models accurately fit the measured data, highlighting their applicability in deterministic RCS characterization in NF bistatic configurations.

eess.SP↗

arXiv2024

Layered Chirp Spread Spectrum Modulations for LPWANs

This article examines two chirp spread spectrum techniques specifically devised for low-power wide-area networks (LPWANs) to optimize energy and spectral efficiency (SE). These methods referred to as layered CSS (LCSS) and layered dual-mode CSS (LDMCSS), involves utilizing multiple layers for multiplexing symbols with varying chirp rates. These waveform designs exemplify a high degree of SE compared to existing schemes. Additionally, LDMCSS necessitates a lesser number of layers than LCSS to attain comparable SE, thereby reducing computational complexity. These proposed techniques can employ coherent and non-coherent detection and can be adjusted to achieve various spectral efficiencies by altering the number of multiplexed layers. Unlike our proposed LCSS and LDMCSS, other CSS alternatives for LPWANs cannot provide the same level of flexibility and SE. The performance of these techniques is evaluated in terms of bit error rate under different channel conditions, as well as with phase and frequency offsets.

eess.SP↗

arXiv2024

A Unified Deep Transfer Learning Model for Accurate IoT Localization in Diverse Environments

Internet of Things (IoT) is an ever-evolving technological paradigm that is reshaping industries and societies globally. Real-time data collection, analysis, and decision-making facilitated by localization solutions form the foundation for location-based services, enabling them to support critical functions within diverse IoT ecosystems. However, most existing works on localization focus on single environment, resulting in the development of multiple models to support multiple environments. In the context of smart cities, these raise costs and complexity due to the dynamicity of such environments. To address these challenges, this paper presents a unified indoor-outdoor localization solution that leverages transfer learning (TL) schemes to build a single deep learning model. The model accurately predicts the localization of IoT devices in diverse environments. The performance evaluation shows that by adopting an encoder-based TL scheme, we can improve the baseline model by about 17.18% in indoor environments and 9.79% in outdoor environments.

eess.SP↗

arXiv2022

Dual-Mode Time Domain Multiplexed Chirp Spread Spectrum

We propose a dual-mode (DM) time domain multiplexed (TDM) chirp spread spectrum (CSS) modulation for spectral and energy-efficient low-power wide-area networks (LPWANs). DM-CSS modulation that uses both the even and odd cyclic time shifts has been proposed for LPWANs to achieve noteworthy performance improvement over classical counterparts. However, its spectral efficiency (SE) is half of the in-phase and quadrature (IQ)-TDM-CSS scheme that employs IQ components with both up and down chirps, resulting in a SE that is four times relative to Long Range (LoRa) modulation. Nevertheless, the IQ-TDM-CSS scheme only allows coherent detection. Furthermore, it is also sensitive to carrier frequency and phase offsets, making it less practical for low-cost battery-powered LPWANs for Internet-of-Things (IoT) applications. DM-CSS uses either an up-chirp or a down-chirp. DM-TDM-CSS consists of two chirped symbols that are multiplexed in the time domain. One of these symbols consisting of even and odd frequency shifts (FSs) is chirped using an up-chirp. The second chirped symbol also consists of even and odd FSs, but they are chirped using a down-chirp. It shall be demonstrated that DM-TDM-CSS attains a maximum achievable SE close to IQ-TDM-CSS while also allowing both coherent and non-coherent detection. Additionally, unlike IQ-TDM-CSS, DM-TDM-CSS is robust against carrier frequency and phase offsets.

eess.SP↗

arXiv2022

Chirp Spread Spectrum-based Waveform Design and Detection Mechanisms for LPWAN-based IoT -- A Survey

LoRa is a widely adopted method of utilizing chirp spread spectrum (CSS) techniques at the physical (PHY) layer to facilitate low-power wide-area network (LPWAN) connectivity. By tailoring the spreading factors, LoRa can achieve a diverse spectral and energy efficiency (EE) levels, making it amenable to a plethora of Internet-of-Things (IoT) applications that rely on LPWANs. However, a primary drawback of LoRa is its relatively low data data rate. Despite this, there has been a dearth of research dedicated to enhancing the data transfer capabilities of LoRa until recently, when a plethora of CSS-based PHY layer alternatives to LoRa for LPWANs was proposed. This survey, for the first time, presents a comprehensive examination of the waveform design of these CSS-based PHY layer alternatives, proposed between \(2019\) and \(2022\). A total of fifteen alternatives to LoRa are analyzed. This study delves deeply into the waveform design of alternatives to LoRa. The CSS schemes studied in this study are classified into three categories: single chirp, multiple chirps, and multiple chirps with index modulation, based on the number of activated frequency shifts activated for un-chirped symbols. The transceiver architecture of these schemes is thoroughly explicated. Additionally, we propose coherent/non-coherent detection mechanisms for specific schemes that have not been previously documented in the literature. We also provide some key insights and recommendations based on the performance of the schemes. The performance of the schemes is evaluated based on metrics such as EE, spectral efficiency, the bit-error-rate (BER) in additive white Gaussian noise, and BER in the presence of phase and frequency offsets. Finally, we highlight some open research issues and future research directions in this field.

eess.SP↗

arXiv2022

A Framework for Amalgamating Optical-OFDM and Optical-OFDM with Index Modulation for Optical Wireless Systems

In this communication, we propose a framework for amalgamating optical-orthogonal frequency-division multiplexing (O-OFDM) and O-OFDM with index modulation (O-OFDM-IM) for optical wireless systems. Both schemes individually have some limitations, e.g., O-OFDM does not provide any granularity for spectral efficiency (SE)/energy efficiency (EE) trade-off, and O-OFDM-IM loses EE for higher order modulation alphabets. By combining O-OFDM and O-OFDM-IM together, the above limitations can be circumvented. Following on from providing the general framework, we use asymmetrically clipped (AC)O-OFDM and ACO-OFDM-IM to demonstrate the validity of the framework. The results presented herein establish that, by consolidating O-OFDM and O-OFDM-IM, in addition to providing SE/EE trade-off, we may realise higher SE and outperform O-OFDM-IM in terms of EE for high SE.

eess.SP↗

arXiv2022

Dual-Mode Chirp Spread Spectrum Modulation

In this letter, we propose dual-mode chirp spread spectrum (DM-CSS) modulation for low-power wide-area networks. DM-CSS is capable of achieving a higher spectral efficiency (SE) relative to its counterparts, such as Long Range (LoRa) modulation. Considering the same symbol period, the SE in DM-CSS are augmented by: (i) simultaneously multiplexing even and odd chirp signals; (ii) using phase shifts of \(0\) and \(\pi\) radians for both even and odd chirp signals; and (iii) using either up-chirp or down-chirp signal. The SE increases by up to \(116.66\%\) for the same bandwidth and spreading factor relative to LoRa. We present a complete transceiver architecture along with non-coherent detection process. Simulation results reveal that DM-CSS is not only more spectral efficient but also more energy efficient than most classical counterparts. It is also demonstrated that DM-CSS is robust to phase and frequency offsets.

eess.SP↗