Alexei Blednykh | arXiv Science

arXiv2026

Evaluation of Transverse Incoherent Tune Shifts in the Electron-Ion Collider

Achieving the Electron-Ion Collider (EIC) peak luminosity goal of 10 to the power of 34 per square centimeter per second requires high average currents, flat beams, non-circular vacuum chambers, and large transverse orbit offsets in the Hadron Storage Ring (HSR) and Electron Storage Ring (ESR). These conditions can generate collective effects and incoherent tune spreads that drive particles across low-order betatron resonances, causing emittance growth, halo formation, and reduced beam lifetime. We quantitatively evaluate incoherent transverse betatron tune shifts from beam-beam interactions, direct space charge, and beam-environment interactions associated with image forces and vacuum chamber geometry. Xsuite and PyHEADTAIL simulations validate the analytical calculations for beam-beam and direct space-charge effects, respectively. For indirect space-charge effects, we review and compare several analytical formalisms and apply the Laslett image-charge formulation to rectangular vacuum chambers with off-axis beams. The analysis accounts for transverse orbit offsets of up to 20 mm in the HSR and 10 mm in the ESR. The results establish baseline parameters and provide quantitative guidance for EIC design, optimization, and operation. The comparison of indirect space-charge formalisms also offers an accessible reference and methodology for studies of high-intensity beam dynamics.

physics.acc-ph↗

arXiv2026

Design of the Electron-Beam Collimator for the Electron-Ion Collider

The design and optimization of a beam collimator for the Electron Storage Ring (ESR) of the Electron-Ion Collider (EIC) are presented. The collimator must efficiently intercept stray beam particles while maintaining acceptable beam coupling impedance, surviving rapid accidental beam impacts, and withstanding steady-state beam-induced heating. An integrated design approach combining beam-loss tracking, electromagnetic-shower simulations, thermomechanical analysis, and impedance calculations is developed and benchmarked against published simulations and beam-impact experiments. A comparison of candidate absorber materials identifies Al2219-T62 as providing a favorable balance of beam-impact robustness, thermal and electrical conductivity, mechanical strength, and ultra-high-vacuum compatibility. For the ultimate ESR bunch charge of 28 nC at 10 GeV, the Al2219-T62 jaw remains below the adopted practical thermal-shock threshold for approximately 50 fully intercepted bunches and below the localized melting threshold for approximately 100 bunches under the reference impact conditions considered. These results provide an engineering input to the machine-protection requirements, for which a complete protection response within several machine turns is required. Optimization of the absorber-tip length yields a 70 mm tapered jaw that balances collimation performance, beam-impact robustness, and impedance. The resulting design maintains acceptable impedance margins and remains below both the yield and ultimate tensile strengths under a conservative 3.6 kW beam-induced heating scenario. The results establish a baseline ESR collimator design and a benchmarked methodology for evaluating collimator robustness in high-current electron storage rings.

physics.acc-ph↗