arXiv subjects

Alexandros Daglis

Publications and source records attributed to Alexandros Daglis.

10 recordsLinked to original sources

arXiv2026

Scalable Edge-assisted Fusion and Path Prediction for Connected Autonomous Vehicles

The planning algorithms inside an Autonomous Vehicle (AV) rely on information from on-board sensors whose line of sight is limited by emerging traffic conditions and occlusions. Edge-assisted creation of a unified world model fusing information from AVs and Road Side Units (RSUs) in a geographical locale, and the prediction of AVs' future trajectories, can enhance the planning algorithms inside AVs to improve quality metrics, such as better traffic flow and collision prevention. AVs participating in such enhancements are called Connected Autonomous Vehicles (CAVs). However, such information generated by the edge (world model and motion predictions) must reach the planners within a tight Age of Information (AoI) time budget to be useful. The state of the art fuses per-CAV information: each AV fuses inputs from other actors locally, which limits both scalability with actor count and quality of results. We present Conductor, an edge-based solution for creating a unified world model from the perspective of a fixed anchor (e.g., an RSU) in a locale and predicting future trajectories of AVs in that locale. Our solution adheres to the AoI time budget by dynamically limiting the number of AVs that would lead to the best quality of results. Specifically, we introduce an occlusion-aware selector that favors information contribution by AVs that detect objects in the locale not covered by RSUs. We pair this selector with a runtime controller that adapts both the number of AV inputs to fuse and the amount of trajectory predictions in each cycle to stay within the AoI time budget. Evaluation on CAV simulation infrastructure shows our joint selector-controller meets the AoI safety bound across traffic scenarios with up to 31 CAVs, with fusion fidelity close to an Oracle and much better than a random selector under the same AoI constraint.

cs.RO↗

arXiv2025

Pushing the Memory Bandwidth Wall with CXL-enabled Idle I/O Bandwidth Harvesting

The continual increase of cores on server-grade CPUs raises demands on memory systems, which are constrained by limited off-chip pin and data transfer rate scalability. As a result, high-end processors typically feature lower memory bandwidth per core, at the detriment of memory-intensive workloads. We propose alleviating this challenge by improving the utility of the CPU's limited pins. In a typical CPU design process, the available pins are apportioned between memory and I/O traffic, each accounting for about half of the total off-chip bandwidth availability. Consequently, unless both memory and I/O are simultaneously highly utilized, such fragmentation leads to underutilization of the valuable off-chip bandwidth resources. An ideal architecture would offer I/O and memory bandwidth fungibility, allowing use of the aggregate off-chip bandwidth in the form required by each workload. In this work, we introduce SURGE, a software-supported architectural technique that boosts memory bandwidth availability by salvaging idle I/O bandwidth resources. SURGE leverages the capability of versatile interconnect technologies like CXL to dynamically multiplex memory and I/O traffic over the same processor interface. We demonstrate that SURGE-enhanced architectures can accelerate memory-intensive workloads on bandwidth-constrained servers by up to 1.3x.

cs.AR↗

arXiv2025

Algorithmic Tradeoff Exploration for Component Placement and Wire Routing in Nanomodular Electronics

Advances in fabrication technology have enabled modularizing electronic components at the micro- or nano-scale and composing these modules on demand into larger circuits. Micromodular and nanomodular electronics (ME and NE) open a new design space in electronics, promising a degree of flexibility, extensibility, and accessibility far superior to traditional monolithic methods. ME/NE leverage a multi-stage process of initial imprecise component deposition, followed by precise wire printing to compose them into a circuit. Due to imperfections in deposition, each circuit instance has a unique layout with its own component placement and wire routing solutions, putting the design automation process on the critical path. Moreover, high-performance nanomodular components enable the synthesis of larger heterogeneous circuits than traditional printed electronics, requiring more scalable algorithms. ME/NE thus introduce a tradeoff between the time-to-solution for placement/routing algorithms and the resulting total wire length, with the latter dictating circuit printing time. We explore this tradeoff by adapting standard partitioning, floorplanning, placement, and routing algorithms to the unique characteristics of ME/NE. Our evaluations demonstrate significant optimization headroom in different dimensions. For example, our tunable algorithms can deliver a $108\times$ improvement in end-to-end manufacturing time at the cost of $21\%$ increase in total wire length. Conversely, circuit quality/performance can be prioritized at the cost of increased manufacturing time, highlighting the value of the ability to dynamically navigate the tradeoff space according to the primary optimization metric.

cs.ET↗

arXiv2025

eCAV: An Edge-Assisted Evaluation Platform for Connected Autonomous Vehicles

As autonomous vehicles edge closer to widespread adoption, enhancing road safety through collision avoidance and minimization of collateral damage becomes imperative. Vehicle-to-everything (V2X) technologies, which include vehicle-to-vehicle (V2V), vehicle-to-infrastructure (V2I), and vehicle-to-cloud (V2C), are being proposed as mechanisms to achieve this safety improvement. Simulation-based testing is crucial for early-stage evaluation of Connected Autonomous Vehicle (CAV) control systems, offering a safer and more cost-effective alternative to real-world tests. However, simulating large 3D environments with many complex single- and multi-vehicle sensors and controllers is computationally intensive. There is currently no evaluation framework that can effectively evaluate realistic scenarios involving large numbers of autonomous vehicles. We propose eCAV -- an efficient, modular, and scalable evaluation platform to facilitate both functional validation of algorithmic approaches to increasing road safety, as well as performance prediction of algorithms of various V2X technologies, including a futuristic Vehicle-to-Edge control plane and correspondingly designed control algorithms. eCAV can model up to 256 vehicles running individual control algorithms without perception enabled, which is $8\times$ more vehicles than what is possible with state-of-the-art alternatives.

cs.RO↗

arXiv2024

Preventing Rowhammer Exploits via Low-Cost Domain-Aware Memory Allocation

Rowhammer is a hardware security vulnerability at the heart of every system with modern DRAM-based memory. Despite its discovery a decade ago, comprehensive defenses remain elusive, while the probability of successful attacks grows with DRAM density. Hardware-based defenses have been ineffective, due to considerable cost, delays in commercial adoption, and attackers' repeated ability to circumvent them. Meanwhile, more flexible software-based solutions either incur substantial performance and memory capacity overheads, or offer limited forms of protection. Citadel is a new memory allocator design that prevents Rowhammer-initiated security exploits by addressing the vulnerability's root cause: physical adjacency of DRAM rows. Citadel enables creation of flexible security domains and isolates different domains in physically disjoint memory regions, guaranteeing security by design. On a server system, Citadel supports thousands of security domains at a modest 7.4% average memory overhead and no performance loss. In contrast, recent domain isolation schemes fail to support many workload scenarios due to excessive overheads, and incur 4--6x higher overheads for supported scenarios. As a software solution, Citadel offers readily deployable Rowhammer-aware isolation on legacy, current, and future systems.

cs.CR↗

arXiv2024

COMET: A Comprehensive Cluster Design Methodology for Distributed Deep Learning Training

Modern Deep Learning (DL) models have grown to sizes requiring massive clusters of specialized, high-end nodes to train. Designing such clusters to maximize both performance and utilization--to amortize their steep cost--is a challenging task requiring careful balance of compute, memory, and network resources. Moreover, a plethora of each model's tuning knobs drastically affect the performance, with optimal values often depending on the underlying cluster's characteristics, which necessitates a complex cluster-workload co-design process. To facilitate the design space exploration of such massive DL training clusters, we introduce COMET, a holistic cluster design methodology and workflow to jointly study the impact of parallelization strategies and key cluster resource provisioning on the performance of distributed DL training. We develop a step-by-step process to establish a reusable and flexible methodology, and demonstrate its application with case studies of training large models on cluster configurations of variable compute, memory, and network resources. Our case studies demonstrate COMET's utility in identifying promising architectural optimization directions and guiding system designers in configuring key model and cluster parameters. To illustrate, cluster configuration comparisons identify performance differences of up to 7.7x and highlight performance optimization opportunities of up to 1.4x when employing memory expansion as an optimization technique.

cs.DC↗

arXiv2023

A Case for CXL-Centric Server Processors

The memory system is a major performance determinant for server processors. Ever-growing core counts and datasets demand higher bandwidth and capacity as well as lower latency from the memory system. To keep up with growing demands, DDR--the dominant processor interface to memory over the past two decades--has offered higher bandwidth with every generation. However, because each parallel DDR interface requires a large number of on-chip pins, the processor's memory bandwidth is ultimately restrained by its pin-count, which is a scarce resource. With limited bandwidth, multiple memory requests typically contend for each memory channel, resulting in significant queuing delays that often overshadow DRAM's service time and degrade performance. We present CoaXiaL, a server design that overcomes memory bandwidth limitations by replacing \textit{all} DDR interfaces to the processor with the more pin-efficient CXL interface. The widespread adoption and industrial momentum of CXL makes such a transition possible, offering $4\times$ higher bandwidth per pin compared to DDR at a modest latency overhead. We demonstrate that, for a broad range of workloads, CXL's latency premium is more than offset by its higher bandwidth. As CoaXiaL distributes memory requests across more channels, it drastically reduces queuing delays and thereby both the average value and variance of memory access latency. Our evaluation with a variety of workloads shows that CoaXiaL improves the performance of manycore throughput-oriented servers by $1.52\times$ on average and by up to $3\times$.

cs.AR↗

arXiv2022

NFSlicer: Data Movement Optimization for Shallow Network Functions

Network Function (NF) deployments on commodity servers have become ubiquitous in datacenters and enterprise settings. Many commonly used NFs such as firewalls, load balancers and NATs are shallow - i.e., they only examine the packet's header, despite the entire packet being transferred on and off the server. As a result, the gap between moved and inspected data when handling large packets exceeds 20x. At modern network rates, such excess data movement is detrimental to performance, hurting both the average and 90% tail latency of large packets by up to 1.7x. Our thorough performance analysis identifies high contention on the NIC-server PCIe interface and in the server's memory hierarchy as the main bottlenecks. We introduce NFSlicer, a data movement optimization implemented as a NIC extension to mitigate the bottlenecks stemming from data movement deluge in deployments of shallow NFs on commodity servers. NFSlicer only transfers the small portion of each packet that the deployed NFs actually inspect, by slicing the packet's payload and temporarily storing it in on-NIC memory. When the server later transmits the processed packet, NFSlicer splices it to its previously sliced payload. We develop a software-based emulation platform and demonstrate that NFSlicer effectively minimizes data movement between the NIC and the server, bridging the latency gap between small and large packet NF processing. On a range of shallow NFs handling 1518B packets, NFSlicer reduces average and 90% tail latency by up to 17% / 29%, respectively.

cs.NI↗

arXiv2019

Design Guidelines for High-Performance SCM Hierarchies

With emerging storage-class memory (SCM) nearing commercialization, there is evidence that it will deliver the much-anticipated high density and access latencies within only a few factors of DRAM. Nevertheless, the latency-sensitive nature of memory-resident services makes seamless integration of SCM in servers questionable. In this paper, we ask the question of how best to introduce SCM for such servers to improve overall performance/cost over existing DRAM-only architectures. We first show that even with the most optimistic latency projections for SCM, the higher memory access latency results in prohibitive performance degradation. However, we find that deployment of a modestly sized high-bandwidth 3D stacked DRAM cache makes the performance of an SCM-mostly memory system competitive. The high degree of spatial locality that memory-resident services exhibit not only simplifies the DRAM cache's design as page-based, but also enables the amortization of increased SCM access latencies and the mitigation of SCM's read/write latency disparity. We identify the set of memory hierarchy design parameters that plays a key role in the performance and cost of a memory system combining an SCM technology and a 3D stacked DRAM cache. We then introduce a methodology to drive provisioning for each of these design parameters under a target performance/cost goal. Finally, we use our methodology to derive concrete results for specific SCM technologies. With PCM as a case study, we show that a two bits/cell technology hits the performance/cost sweet spot, reducing the memory subsystem cost by 40% while keeping performance within 3% of the best performing DRAM-only system, whereas single-level and triple-level cell organizations are impractical for use as memory replacements.

cs.AR↗

arXiv2018

Exploiting Errors for Efficiency: A Survey from Circuits to Algorithms

When a computational task tolerates a relaxation of its specification or when an algorithm tolerates the effects of noise in its execution, hardware, programming languages, and system software can trade deviations from correct behavior for lower resource usage. We present, for the first time, a synthesis of research results on computing systems that only make as many errors as their users can tolerate, from across the disciplines of computer aided design of circuits, digital system design, computer architecture, programming languages, operating systems, and information theory. Rather than over-provisioning resources at each layer to avoid errors, it can be more efficient to exploit the masking of errors occurring at one layer which can prevent them from propagating to a higher layer. We survey tradeoffs for individual layers of computing systems from the circuit level to the operating system level and illustrate the potential benefits of end-to-end approaches using two illustrative examples. To tie together the survey, we present a consistent formalization of terminology, across the layers, which does not significantly deviate from the terminology traditionally used by research communities in their layer of focus.

cs.AR↗