arXiv subjects

Alexandre Jeanneau

Publications and source records attributed to Alexandre Jeanneau.

17 recordsLinked to original sources

arXiv2026

4MOST Low Resolution Spectrographs Characterization in Chile

4MOST, the 4m Multi Object Spectroscopic Telescope, is the optical, fibre-fed, MOS facility for the VISTA telescope at ESO's Paranal Observatory in Chile. Its main science drivers are in the fields of galactic archeology, high-energy physics, galaxy evolution and cosmology. The 4MOST consortium consists of several institutes in Europe and Australia under leadership of the Leibniz-Institut fur Astrophysik Potsdam (AIP). This paper focuses on the successful testing, installation and technical commissioning of the Low Resolution Spectrographs (LRS-A and B) for the 4MOST instrument at ESO's Paranal Observatory, Chile. This work was completed on October 18. 2025. Details on the assembly, integration, and performance of both 4MOST spectrographs from their arrival in the integration hall through to the telescope installation are provided. Attention is given to the optimization of procedures implemented to enhance performance and meet the expected top-level requirements. The 4MOST LRS features 2436 fibres split into two low-resolution spectrographs LRS-A and LRS-B (1624 fibres, three arms, 370-950 nm, R > 4000) and one high-resolution spectrograph (812 fibres, three arms, ~44-69 nm coverage each, R > 18000). The fibre positioner covers a hexagonal field of view of ~4.1 deg2. The fibers are 85 {\mu}m core with an output beam at f/3. The Centre de Recherche Astrophysique de Lyon (CRAL) had the full responsibility for the two low-resolution spectrographs. Each of them is composed of an off-axis Schmidt collimator that produces a 200 mm beam, which is split into three spectral arms by dichroics and directed to F/1.73 cameras with standard 6k x 6k 15 microns pixel CCD detectors.

astro-ph.IM↗

arXiv2026

WST, the Wide-field Spectroscopic Telescope: dispersing elements

The Wide-field Spectroscopic Telescope (WST) is a proposed 12-m class facility entirely dedicated to spectroscopic surveys, combining a high-multiplex multi-object spectrograph operating at low (MOS-LR) and high (MOS-HR) spectral resolution with a giant panoramic integral-field spectrograph (IFS), all three operating in parallel. Diffraction gratings are the key dispersing elements of all three instruments and, given the very large number and size of the units required, drive critical trade-offs in throughput, feasibility and production cost. This paper reviews the two grating technologies under consideration for WST, Volume Phase Holographic Gratings (VPHG) and binary (lithographic, surface-relief) gratings, summarizing their working principles and the parameters that control their diffraction efficiency. We then present the current baseline grating parameters and vendor results for each instrument: low-dispersion, VPHGs for the IFS; a four-arm GRISM layout for MOS-LR; and two competing high-resolution disperser architectures (8M16D and 16M4D) for MOS-HR, where binary gratings show a promising path to diffraction efficiencies beyond what is achievable with VPHGs. We conclude with the main open challenges, chiefly the mass production of hundreds of grating units within cost and schedule and the next steps foreseen to consolidate the disperser baseline for WST.

astro-ph.IM↗

arXiv2026

ESO-VLT BlueMUSE instrument - Conceptual Design for Phase A

BlueMUSE is a blue-optimised, medium spectral resolution, panoramic integral field spectrograph under development for the ESO's Very Large Telescope (VLT). The project is now entering preliminary design phase. With an optimised transmission down to 350 nm, spectral resolution of R $\sim$ 3500 on average across the wavelength range, and a large FoV (1 arcmin2), BlueMUSE will open up a new range of galactic and extragalactic science cases facilitated by its specific capabilities. BlueMUSE consists of several subsystems arranged along the light path. A calibration unit reproduces the VLT's optical conditions, while the fore optics reshape the telescope's focal image. The splitting and relay optics divide the field of view into 16 channels, each feeding an integral field unit that contains an image slicer, a spectrograph, and a detector vessel. The image slicer converts the 2D sub-field into a 1D pseudo-slit, which the spectrograph disperses into spectra recorded by a 4k x 4k CCD in each detector vessel. A vacuum and cryogenic system cools the detectors, and the data reduction software processes the raw data into data cubes which are subsequently processed by a data analysis software system. All subsystems are supported by the instrument main structure and enclosed in a thermal housing for stability. The whole instrument is managed by an integrated control system combining electronics and software. This paper summarizes the baseline architecture, interfaces, and functional descriptions of the BlueMUSE instrument at the start of Design Phase. This architecture is derived from the top-level requirements and the experience acquired from MUSE. It presents the global concepts along with their preliminary performance estimates.

astro-ph.IM↗

arXiv2026

WST, the wide-field spectroscopic telescope: progress on the design of the instruments

WST, the Wide-field Spectroscopic Telescope is a proposed new facility that will provide a transformational gain in spectroscopic survey capability over existing facilities. The WST is a 12 metre class telescope equipped with instrumentation to provide simultaneous observations in both multiple-object spectroscopy and integral field spectroscopy modes. This paper will describe the status of the instruments being designed for the WST, the fibre positioner module, the low and high-resolution multiple object spectrographs, the integral field spectrograph, disperser technology, sustainable detector and cryostat technology, and the calibration system. An overview of the overall layout of the instruments within the WST facility will be provided.

astro-ph.IM↗

arXiv2026

WST -- Wide-field Spectroscopic Telescope: The Next Leap in Wide-field Spectroscopy

The Wide-field Spectroscopic Telescope (WST) is a concept for a dedicated 12-m spectroscopic survey facility designed to address some of the most important questions in astrophysics in the 2040s. The WST will provide unprecedented spectroscopic survey capabilities by operating simultaneously over a 2-degree diameter field of view with 54 low-resolution spectrographs fed by 30,000 fibres, 8-16 high-resolution spectrographs fed by 2,000 fibres, and a large panoramic low-resolution integral-field spectrograph. Supported by Horizon Europe, the concept study has refined the science cases, facility architecture, operations model, sustainability strategy, and technology roadmap. The resulting reference design demonstrates that the WST is both scientifically transformative and technically feasible, while identifying the developments required to mitigate the remaining risks. The WST is designed as an ESO flagship facility for the post-ELT construction era and a key spectroscopic complement to the major imaging, time-domain, and multi-messenger facilities of the coming decades.

astro-ph.IM↗

arXiv2026

Design and Testing of the Motorized 2-DoF Folding Mirror 1 for the VLT BlueMUSE Instrument

BlueMUSE is a blue-optimized, medium spectral resolution, panoramic integral field spectrograph under development for the Very Large Telescope (VLT). The project is now fully entering the design phase. With an optimized transmission down to 350 nm, spectral resolution of R$\sim$3500 on average across the wavelength range, and a large FoV (1 arcmin), BlueMUSE will open up a new range of galactic and extragalactic science cases facilitated by its specific capabilities. In this paper, we present the design, implementation and evaluation of the motorized mount developed for Folding Mirror 1 (FM1) of the VLT BlueMUSE instrument. The mount provides two degrees of freedom in tip and tilt and is engineered to correct misalignments caused by environmental variations. The preliminary results demonstrate that the motorized FM1 tilt mount achieves the required precision and maintains alignment stability within the tight tolerances defined by the BlueMUSE project.

astro-ph.IM↗

arXiv2026

Motorized Mount for the 3-DoF Folding Mirror 2 of the VLT's BlueMUSE Instrument

BlueMUSE is a blue-optimized, medium spectral resolution, panoramic integral field spectrograph under development for the Very Large Telescope (VLT). The project is now fully entering design phase. With an optimized transmission down to 350 nm, spectral resolution of R~3500 on average across the wavelength range, and a large FoV (1 arcmin2), BlueMUSE will open up a new range of galactic and extragalactic science cases facilitated by its specific capabilities. To meet the stability demands required for BlueMUSE, motorized mounts for precise and repeatable positioning of key optics are developed. This paper explores candidate mechanical designs for BlueMUSE's Folding Mirror 2 (FM2), a high-precision mirror mount with three degrees-of-freedom: tip, tilt rotations, and vertical translation. The study includes a comparative performance analysis through theoretical simulations, details the mechanical, software and electronics architecture of the chosen design, as well as the dedicated optical setup design to characterize repeatability, precision, and thermal stability. The resulting performance of the chosen FM2 mount is then evaluated against the specified requirements for BlueMUSE.

astro-ph.IM↗

arXiv2026

IFS spectrograph designs for the Wide-field Spectroscopic Telescope: Architecture and performance gains from curved sensors

The Wide-field Spectroscopic Telescope (WST) is a proposed 12-meter segmented facility optimized for seeing limited observations in the visible and designed to operate both a high-multiplex multi-object spectrograph and a panoramic integral field spectrograph (IFS). The WST IFS concept builds on instruments such as MUSE at the VLT (Very Large Telescope), using field splitters and image slicers to reformat a large field into pseudo-slits feeding spectrographs with two optimized spectral channels. This paper presents the spectrograph architecture developed for the WST IFS, aiming to achieve high through put and image quality over a wide wavelength range in a cost-effective manner. We investigate the use of curved detectors as a means to simplify the spectrograph layout, reduce aberrations, and potentially improve efficiency. This study establishes a promising baseline for the IFS spectrographs and assesses the benefits of incorporating curved sensors that can guide the development of future large-scale integral field spectrographs.

astro-ph.IM↗

arXiv2026

MUSE-DARK-II: 3D morpho-kinematic modelling of lensed galaxies. Tully-Fisher relation of $z \sim 1$ star-forming galaxies

In a series of papers on lensed kinematics, we seek to combine the sensitivity of 3D forward modelling to low signal-to-noise ratio outskirts with the enhanced spatial resolution of cluster lensing. In this first paper, we (i) present and validate our methodology, which directly constrains the source parameters by incorporating lensing deflections into the $\texttt{GalPaK}^\texttt{3D}$ forward-modelling algorithm, and (ii) investigate the evolution of the stellar-mass and baryonic-mass Tully-Fisher relations (sTFR and bTFR) since $z \sim 1$. We define a robust sample of strongly lensed star-forming galaxies (SFGs) from the MUSE Lensing Cluster survey, spanning magnifications $\mu = 1.4 - 12.4$ and stellar masses $M_\star = 10^{8.1} - 10^{10.3} M_\odot$. Using a series of mock galaxies, we find that our method is significantly more reliable at recovering morpho-kinematic properties than approaches that ignore differential magnification, even for relatively modest magnifications ($\mu < 6$). Restricting the analysis to 95 rotationally supported SFGs with well-constrained velocities, we find a significant evolution of the sTFR zero-point ($\Delta b^\mathrm{sTFR} = -0.42^{+0.05}_{-0.05}~\mathrm{dex}$ in stellar mass) but no detectable evolution of the bTFR zero-point ($\Delta b^\mathrm{bTFR} = 0.00^{+0.06}_{-0.06}~\mathrm{dex}$ in baryonic mass) relative to $z \approx 0$. Our results are consistent with a mild evolution of the stellar-to-halo mass ratio and support the view that the sTFR has evolved only weakly over the past $\sim 8$ Gyr, aside from shifts driven by the redshift dependence of halo-defining quantities such as the critical density and overdensity. The absence of detectable evolution in the bTFR zero-point suggests that the increasing contribution of cold gas mass at higher redshift fully compensates the evolution observed in the stellar component alone. [abridged]

astro-ph.GA↗

arXiv2024

The Blue Multi Unit Spectroscopic Explorer (BlueMUSE) on the VLT: characterization of two VPHG prototypes based on dichromated gelatin and photopolymer recording materials

Volume-phase holographic gratings (VPHGs) are widely used in astronomical spectrographs due to their adaptability and high diffraction efficiency. Most VPHGs in operation use dichromated gelatin as a recording material, whose performance is sensitive to the coating and development process, especially in the near-UV. In this letter, we present the characterization of two UV-blue VPHG prototypes for the BlueMUSE integral field spectrograph on the VLT, based on dichromated gelatin and the Bayfol$\circledR$HX photopolymer film as recording materials. Our measurements show that both prototypes meet the required diffraction efficiency and exhibit similar performance with a wavelength-average exceeding 70% in the 350-580 nm range. Deviations from theoretical models increase towards 350 nm, consistently with previous studies on similar gratings. We also report similar performances in terms spatial uniformity and grating-to-grating consistency. Likewise, no significant differences in wavefront error or scattered light are observed between the prototypes.

astro-ph.IM↗

arXiv2024

The Blue Multi Unit Spectroscopic Explorer (BlueMUSE) on the VLT: science drivers and overview of instrument design

BlueMUSE is a blue-optimised, medium spectral resolution, panoramic integral field spectrograph under development for the Very Large Telescope (VLT). With an optimised transmission down to 350 nm, spectral resolution of R$\sim$3500 on average across the wavelength range, and a large FoV (1 arcmin$^2$), BlueMUSE will open up a new range of galactic and extragalactic science cases facilitated by its specific capabilities. The BlueMUSE consortium includes 9 institutes located in 7 countries and is led by the Centre de Recherche Astrophysique de Lyon (CRAL). The BlueMUSE project development is currently in Phase A, with an expected first light at the VLT in 2031. We introduce here the Top Level Requirements (TLRs) derived from the main science cases, and then present an overview of the BlueMUSE system and its subsystems fulfilling these TLRs. We specifically emphasize the tradeoffs that are made and the key distinctions compared to the MUSE instrument, upon which the system architecture is built.

astro-ph.IM↗

arXiv2024

WST -- Widefield Spectroscopic Telescope: addressing the instrumentation challenges of a new 12m class telescope dedicated to widefield Multi-object and Integral Field Spectroscopy

WST - Widefield Spectroscopic Telescope: We summarise the design challenges of instrumentation for a proposed 12m class Telescope that aims to provide a large (>2.5 square degree) field of view and enable simultaneous Multi-object (> 20,000 objects) and Integral Field spectroscopy (inner 3x3 arcminutes field of view), initially at visible wavelengths. For the MOS mode, instrumentation includes the fiber positioning units, fiber runs and the high (R~40,000) and low (R~3,000 - 4,000) resolution spectrographs. For the MUSE like Integral Field Spectrograph, this includes the relay from the Telescope Focal Plane, the multi-stage splitting and slicing and almost 150 identical spectrographs. We highlight the challenge of mass production at a credible cost and the issues of maintenance and sustainable operation.

astro-ph.IM↗

arXiv2023

Probing the faint end Luminosity Function of Lyman Alpha Emitters at 3<z<7 behind 17 MUSE lensing clusters

We present a study of the galaxy Lyman-alpha luminosity function (LF) using a sample of 17 lensing clusters observed by the MUSE/VLT. Magnification from strong gravitational lensing by clusters of galaxies and MUSE apabilities allow us to blindly detect LAEs without any photometric pre-selection, reaching the faint luminosity regime. 600 lensed LAEs were selected behind these clusters in the redshift range 2.9<$z$< 6.7, covering four orders of magnitude in magnification-corrected Lyman-alpha luminosity (39.0 42 are consistent with those obtained from blank field observations. In the faint luminosity regime, the density of sources is well described by a steep slope, $\alpha\sim-2$ for the global redshift range. Up to log(L)$\sim$41, the steepening of the faint end slope with redshift, suggested by the earlier work of DLV19 is observed, but the uncertainties remain large. A significant flattening is observed towards the faintest end, for the highest redshift bins (log$L$<41). Using face values, the steep slope at the faint-end causes the SFRD to dramatically increase with redshift, implying that LAEs could play a major role in the process of cosmic reionization. The flattening observed towards the faint end for the highest redshift bins still needs further investigation. This turnover is similar to the one observed for the UV LF at $z\geq6$ in lensing clusters, with the same conclusions regarding the reliability of current results (e.g.arXiv:1803.09747(N); arXiv:2205.11526(N)).

astro-ph.GA↗

arXiv2023

A new step forward in realistic cluster lens mass modelling: Analysis of Hubble Frontier Field Cluster Abell S1063 from joint lensing, X-ray and galaxy kinematics data

We present a new method to simultaneously/self-consistently model the mass distribution of galaxy clusters that combines constraints from strong lensing features, X-ray emission and galaxy kinematics measurements. We are able to successfully decompose clusters into their collisionless and collisional mass components thanks to the X-ray surface brightness, as well as using the dynamics of cluster members to obtain more accurate masses with the fundamental plane of elliptical galaxies. Knowledge from all observables is included through a consistent Bayesian approach in the likelihood or in physically motivated priors. We apply this method to the galaxy cluster Abell S1063 and produce a mass model that we publicly release with this paper. The resulting mass distribution presents a different ellipticities for the intra-cluster gas and the other large-scale mass components; and deviation from elliptical symmetry in the main halo. We assess the ability of our method to recover the masses of the different elements of the cluster using a mock cluster based on a simplified version of our Abell S1063 model. Thanks to the wealth of information provided by the mass model and the X-ray emission, we also found evidence for an on-going merger event with gas sloshing from a smaller infalling structure into the main cluster. In agreement with previous findings, the total mass, gas profile and gas mass fraction are consistent with small deviations from the hydrostatic equilibrium. This new mass model for Abell S1063 is publicly available as is the software used to construct it through the \textsc{Lenstool} package.

astro-ph.CO↗

arXiv2022

Pilot-WINGS: An extended MUSE view of the structure of Abell 370

We investigate the strong-lensing cluster Abell 370 (A370) using a wide Integral Field Unit (IFU) spectroscopic mosaic from the Multi-Unit Spectroscopic Explorer (MUSE). IFU spectroscopy provides significant insight into the structure and mass content of galaxy clusters, yet IFU-based cluster studies focus almost exclusively on the central Einstein-radius region. Covering over 14 arcmin$^2$, the new MUSE mosaic extends significantly beyond the A370 Einstein radius, providing, for the first time, a detailed look at the cluster outskirts. Combining these data with wide-field, multi-band Hubble Space Telescope (HST) imaging from the BUFFALO project, we analyse the distribution of objects within the cluster and along the line of sight. Identifying 416 cluster galaxies, we use kinematics to trace the radial mass profile of the halo, providing a mass estimate independent from the lens model. We also measure radially-averaged properties of the cluster members, tracking their evolution as a function of infall. Thanks to the high spatial resolution of our data, we identify six cluster members acting as galaxy-galaxy lenses, which constrain localized mass distributions beyond the Einstein radius. Finally, taking advantage of MUSE's 3D capabilities, we detect and analyse multiple spatially extended overdensities outside of the cluster that influence lensing-derived halo mass estimates. We stress that much of this work is only possible thanks to the robust, extended IFU coverage, highlighting its importance even in less optically dense cluster regions. Overall, this work showcases the power of combining HST+MUSE, and serves as the initial step towards a larger and wider program targeting several clusters.

astro-ph.GA↗

arXiv2021

The SuperCam Infrared Spectrometer for the Perseverance Rover of the Mars2020 mission

We present the Infrared spectrometer of SuperCam Instrument Suite that enables the Mars 2020 Perseverance Rover to study remotely the Martian mineralogy within the Jezero crater. The SuperCam IR spectrometer is designed to acquire spectra in the 1.3-2.6 $\mu$m domain at a spectral resolution ranging from 5 to 20~nm. The field-of-view of 1.15 mrad, is coaligned with the boresights of the other remote-sensing techniques provided by SuperCam: laser-induced breakdown spectroscopy, remote time-resolved Raman and luminescence spectroscopies, and visible reflectance spectroscopy, and micro-imaging. The IR spectra can be acquired from the robotic-arm workspace to long-distances, in order to explore the mineralogical diversity of the Jezero crater, guide the Perseverance Rover in its sampling task, and to document the samples' environment. We present the design, the performance, the radiometric calibration, and the anticipated operations at the surface of Mars.

astro-ph.EP↗

arXiv2021

Curved detector-based optical design for the VLT/BlueMUSE instrument

BlueMUSE (Blue Multi Unit Spectroscopic Explorer) is a blue-optimised, medium spectral resolution, panoramic integral field spectrograph proposed for the Very Large Telescope (VLT) and based on the MUSE concept. BlueMUSE will open up a new range of galactic and extragalactic science cases allowed by its specific capabilities in the 350 - 580 nm range: an optimised end-to-end transmission down to 350 nm, a larger FoV (up to $1.4 \times 1.4$ arcmin$^2$) sampled at 0.3 arcsec, and a higher spectral resolution ($\lambda/\Delta \lambda \sim 3500$) compared to MUSE. To our knowledge, achieving such capabilities with a comparable mechanical footprint and an identical detector format ($4\text{k} \times 4\text{k}$, 15 $\mathrm{\mu m}$ CCD) would not be possible with a conventional spectrograph design. In this paper, we present the optomechanical architecture and design of BlueMUSE at pre-phase A level, with a particular attention to some original aspects such as the use of curved detectors.

astro-ph.IM↗