arXiv Science⌕ Search

arXiv subjects

Alexander Schmitz

Publications and source records attributed to Alexander Schmitz.

10 recordsLinked to original sources

A Case Study of a Phishing Cluster Targeting German Universities

In light of recent ransomware attacks, this study analyzes and measures the impact of cyberattacks against academic institutions in German-speaking areas. First, we provide an overview of 25 confirmed cyberattacks against universities in German-speaking areas between February 2022 and February 2023. In this time frame, we find that 5% of all German universities have experienced a confirmed cyberattack with a measurable impact. Second, we document victimology and Tactics, Techniques, and Procedures (TTP) of a phishing activity cluster spanning more than three years and showing a particular focus on universities in German-speaking areas. Of the 93 targeted universities, 58 (62%) are German, representing a significant fraction with approximately 14% of the total number of universities (423) in Germany. A notable technique is that the phishing emails are sent via university infrastructure, using valid, compromised credentials of university-associated personnel and involving university Virtual Private Network (VPN) tunnels.

cs.CR↗

PACT: Posture-Aligned Co-Design Technique for Hand Configuration and Retargeting in Multi-Finger Imitation Learning

The fidelity of teleoperated demonstrations used for imitation learning is determined by how faithfully a robot hand can replicate the operator's posture. The posture retargeting law that the robot will execute is typically selected only once the hardware has been finalized, and conventional hand designs often neglect human-like grasping postures. We introduce PACT, an optimization based on human grasping postures that jointly optimizes the mechanical parameters of a 17-servo robot hand (link lengths, joint offsets, mounting angles, and base placements) and its nonlinear posture retargeter (a linear human-to-robot joint map, per-joint posture-IK weights, and damping). The optimization enforces full-finger correspondence (MCP, PIP, DIP, and tip of each finger) to human poses from the DexYCB dataset, and is constrained by servo interference, assembly clearances, and flat-hand protrusion, so the resulting design can be physically assembled. We fabricate the PACT Hand and validate it through teleoperation experiments and an imitation-learning demonstration. The hand reproduces all human hand keypoints with a kinematic RMSE of 3.9 mm, compared to 12.8 mm for the LEAP Hand baseline, and keeps all fingertips within 10 mm on every grasping posture, while the baseline achieves this for only 21.6% of the poses. Under matched per-joint torque limits, it lifts twice the baseline payload, 2 kg against 1 kg, and deforms a held paper cup seven times less, reaching a deformation level comparable to a human hand. It also achieves an 86% grasping success rate on YCB daily objects, compared to 64% for the baseline. Finally, as a demonstration, an imitation-learning policy trained on demonstrations collected with the PACT Hand achieved a 75% success rate at held-out placements in a can pick-and-place task. Project page: https://pact-hand-2027.github.io

cs.RO↗

TaSA: Two-Phased Deep Predictive Learning of Tactile Sensory Attenuation for Improving In-Grasp Manipulation

Humans can achieve diverse in-hand manipulations, such as object pinching and tool use, which often involve simultaneous contact between the object and multiple fingers. This is still an open issue for robotic hands because such dexterous manipulation requires distinguishing between tactile sensations generated by their self-contact and those arising from external contact. Otherwise, object/robot breakage happens due to contacts/collisions. Indeed, most approaches ignore self-contact altogether, by constraining motion to avoid/ignore self-tactile information during contact. While this reduces complexity, it also limits generalization to real-world scenarios where self-contact is inevitable. Humans overcome this challenge through self-touch perception, using predictive mechanisms that anticipate the tactile consequences of their own motion, through a principle called sensory attenuation, where the nervous system differentiates predictable self-touch signals, allowing novel object stimuli to stand out as relevant. Deriving from this, we introduce TaSA, a two-phased deep predictive learning framework. In the first phase, TaSA explicitly learns self-touch dynamics, modeling how a robot's own actions generate tactile feedback. In the second phase, this learned model is incorporated into the motion learning phase, to emphasize object contact signals during manipulation. We evaluate TaSA on a set of insertion tasks, which demand fine tactile discrimination: inserting a pencil lead into a mechanical pencil, inserting coins into a slot, and fixing a paper clip onto a sheet of paper, with various orientations, positions, and sizes. Across all tasks, policies trained with TaSA achieve significantly higher success rates than baseline methods, demonstrating that structured tactile perception with self-touch based on sensory attenuation is critical for dexterous robotic manipulation.

cs.RO↗

A neural network approach to kinetic Mie polarimetry for particle size diagnostics in nanodusty plasmas

The analysis of the size of nanoparticles is an essential task in plasma technology and dusty plasmas. Light scattering techniques, based on Mie theory, can be used as a non-invasive and in-situ diagnostic tool for this purpose. However, the standard back-calculation methods require expertise from the user. To address this, we introduce a neural network that performs the same task. We discuss how we set up and trained the network to analyze the size of plasma-grown amorphous carbon nanoparticles (a:C-H) with a refractive index n in the range of real(n) = 1.4-2.2 and imag(n) = 0.04i-0.1i and a radius of up to several hundred nanometers, depending on the used wavelength. The diagnostic approach is kinetic, which means that the particles need to change in size due to growth or etching. An uncertainty analysis as well as a test with experimental data are presented. Our neural network achieves results that agree with those of prior fitting algorithms while offering higher methodical stability. The model also holds a major advantage in terms of computing speed and automation.

physics.plasm-ph↗

Padding Matters -- Exploring Function Detection in PE Files

Function detection is a well-known problem in binary analysis. While previous research has primarily focused on Linux/ELF, Windows/PE binaries have been overlooked or only partially considered. This paper introduces FuncPEval, a new dataset for Windows x86 and x64 PE files, featuring Chromium and the Conti ransomware, along with ground truth data for 1,092,820 function starts. Utilizing FuncPEval, we evaluate five heuristics-based (Ghidra, IDA, Nucleus, rev.ng, SMDA) and three machine-learning-based (DeepDi, RNN, XDA) function start detection tools. Among the tested tools, IDA achieves the highest F1-score (98.44%) for Chromium x64, while DeepDi closely follows (97%) but stands out as the fastest by a significant margin. Working towards explainability, we examine the impact of padding between functions on the detection results. Our analysis shows that all tested tools, except rev.ng, are susceptible to randomized padding. The randomized padding significantly diminishes the effectiveness for the RNN, XDA, and Nucleus. Among the learning-based tools, DeepDi exhibits the least sensitivity and demonstrates overall the fastest performance, while Nucleus is the most adversely affected among non-learning-based tools. In addition, we improve the recurrent neural network (RNN) proposed by Shin et al. and enhance the XDA tool, increasing the F1-score by approximately 10%.

cs.CR↗

Focused Blind Switching Manipulation Based on Constrained and Regional Touch States of Multi-Fingered Hand Using Deep Learning

To achieve a desired grasping posture (including object position and orientation), multi-finger motions need to be conducted according to the the current touch state. Specifically, when subtle changes happen during correcting the object state, not only proprioception but also tactile information from the entire hand can be beneficial. However, switching motions with high-DOFs of multiple fingers and abundant tactile information is still challenging. In this study, we propose a loss function with constraints of touch states and an attention mechanism for focusing on important modalities depending on the touch states. The policy model is AE-LSTM which consists of Autoencoder (AE) which compresses abundant tactile information and Long Short-Term Memory (LSTM) which switches the motion depending on the touch states. Motion for cap-opening was chosen as a target task which consists of subtasks of sliding an object and opening its cap. As a result, the proposed method achieved the best success rates with a variety of objects for real time cap-opening manipulation. Furthermore, we could confirm that the proposed model acquired the features of each subtask and attention on specific modalities.

cs.RO↗

FingerTac -- An Interchangeable and Wearable Tactile Sensor for the Fingertips of Human and Robot Hands

Skill transfer from humans to robots is challenging. Presently, many researchers focus on capturing only position or joint angle data from humans to teach the robots. Even though this approach has yielded impressive results for grasping applications, reconstructing motion for object handling or fine manipulation from a human hand to a robot hand has been sparsely explored. Humans use tactile feedback to adjust their motion to various objects, but capturing and reproducing the applied forces is an open research question. In this paper we introduce a wearable fingertip tactile sensor, which captures the distributed 3-axis force vectors on the fingertip. The fingertip tactile sensor is interchangeable between the human hand and the robot hand, meaning that it can also be assembled to fit on a robot hand such as the Allegro hand. This paper presents the structural aspects of the sensor as well as the methodology and approach used to design, manufacture, and calibrate the sensor. The sensor is able to measure forces accurately with a mean absolute error of 0.21, 0.16, and 0.44 Newtons in X, Y, and Z directions, respectively.

cs.RO↗

Multi-Fingered In-Hand Manipulation with Various Object Properties Using Graph Convolutional Networks and Distributed Tactile Sensors

Multi-fingered hands could be used to achieve many dexterous manipulation tasks, similarly to humans, and tactile sensing could enhance the manipulation stability for a variety of objects. However, tactile sensors on multi-fingered hands have a variety of sizes and shapes. Convolutional neural networks (CNN) can be useful for processing tactile information, but the information from multi-fingered hands needs an arbitrary pre-processing, as CNNs require a rectangularly shaped input, which may lead to unstable results. Therefore, how to process such complex shaped tactile information and utilize it for achieving manipulation skills is still an open issue. This paper presents a control method based on a graph convolutional network (GCN) which extracts geodesical features from the tactile data with complicated sensor alignments. Moreover, object property labels are provided to the GCN to adjust in-hand manipulation motions. Distributed tri-axial tactile sensors are mounted on the fingertips, finger phalanges and palm of an Allegro hand, resulting in 1152 tactile measurements. Training data is collected with a data-glove to transfer human dexterous manipulation directly to the robot hand. The GCN achieved high success rates for in-hand manipulation. We also confirmed that fragile objects were deformed less when correct object labels were provided to the GCN. When visualizing the activation of the GCN with a PCA, we verified that the network acquired geodesical features. Our method achieved stable manipulation even when an experimenter pulled a grasped object and for untrained objects.

cs.RO↗

VAE-LIME: Deep Generative Model Based Approach for Local Data-Driven Model Interpretability Applied to the Ironmaking Industry

Machine learning applied to generate data-driven models are lacking of transparency leading the process engineer to lose confidence in relying on the model predictions to optimize his industrial process. Bringing processes in the industry to a certain level of autonomy using data-driven models is particularly challenging as the first user of those models, is the expert in the process with often decades of experience. It is necessary to expose to the process engineer, not solely the model predictions, but also their interpretability. To that end, several approaches have been proposed in the literature. The Local Interpretable Model-agnostic Explanations (LIME) method has gained a lot of interest from the research community recently. The principle of this method is to train a linear model that is locally approximating the black-box model, by generating randomly artificial data points locally. Model-agnostic local interpretability solutions based on LIME have recently emerged to improve the original method. We present in this paper a novel approach, VAE-LIME, for local interpretability of data-driven models forecasting the temperature of the hot metal produced by a blast furnace. Such ironmaking process data is characterized by multivariate time series with high inter-correlation representing the underlying process in a blast furnace. Our contribution is to use a Variational Autoencoder (VAE) to learn the complex blast furnace process characteristics from the data. The VAE is aiming at generating optimal artificial samples to train a local interpretable model better representing the black-box model in the neighborhood of the input sample processed by the black-box model to make a prediction. In comparison with LIME, VAE-LIME is showing a significantly improved local fidelity of the local interpretable linear model with the black-box model resulting in robust model interpretability.

cs.LG↗

Automated Image Analysis of Hodgkin lymphoma

Hodgkin lymphoma is an unusual type of lymphoma, arising from malignant B-cells. Morphological and immunohistochemical features of malignant cells and their distribution differ from other cancer types. Based on systematic tissue image analysis, computer-aided exploration can provide new insights into Hodgkin lymphoma pathology. In this paper, we report results from an image analysis of CD30 immunostained Hodgkin lymphoma tissue section images. To the best of our knowledge, this is the first systematic application of image analysis to a set of tissue sections of Hodgkin lymphoma. We have implemented an automatic procedure to handle and explore image data in Aperio's SVS format. We use pre-processing approaches on a down-scaled image to separate the image objects from the background. Then, we apply a supervised classification method to assign pixels to predefined classes. Our pre-processing method is able to separate the tissue content of images from the image background. We analyzed three immunohistologically defined groups, non-lymphoma and the two most common forms of Hodgkin lymphoma, nodular sclerosis and mixed cellularity type. We found that nodular sclerosis and non-lymphoma images exhibit different amounts of CD30 stain, whereas mixed cellularity type exhibits a large variance and overlaps with the other groups. The results can be seen as a first step to computationally identify tumor regions in the images. This allows us to focus on these regions when performing computationally expensive tasks like object detection in the high-resolution image.

q-bio.TO↗