arXiv subjects

Alexander Lind

Publications and source records attributed to Alexander Lind.

14 recordsLinked to original sources

arXiv2026

Top-quark mass interpretation from simulation of top-flavoured mesons

The interpretation of the top quark mass measurements in terms of well-known field theory definitions has been the topic of a long-standing discussion. In this paper we reconsider this issue and simulate fictitious top-flavoured mesons, whose mass can be related to any top mass definition, such as the pole mass, by means of Heavy Quark Effective Theory. We explore final-state observables for top-pair production in $e^+e^-$ and hadron collisions, and relate the top mass in standard $t\bar t$ events to the pole mass extracted from top-meson samples simulated with Pythia 8.3. Our results are in agreement with the expectation of an uncertainty about $200$-$300$ MeV, hence of the order of $\Lambda_{\rm QCD}$.

hep-ph↗

arXiv2025

Photonic Generation and Free-Space Distribution of Millimeter Waves for Portable Optical Clocks

Robust and portable optical clocks promise to bring sub-picosecond timing instability to smaller form factors, offering possible performance improvements and new scenarios for positioning and navigation, radar technologies, and experiments probing fundamental physics. However, there are currently limited methods suitable for broadly disseminating the sub-picosecond timing signals or performing frequency comparison of these clocks--particularly over open-air paths. Established microwave time transfer techniques only offer nanosecond level time synchronization, whereas optical techniques have challenging pointing requirements and lack the capability of all-weather operation. In this paper, we explore optically derived millimeter-wave carriers as a time-frequency link for full utilization of the next generation of portable optical clocks. We introduce an architecture that synthesizes 90 GHz millimeter waves with a one second residual instability of 2x10^-15, averaging into the 10^-17 range. In addition, we demonstrate a first-of-its-kind 110 m phase-stabilized free-space frequency comparison link over a millimeter-wave band with a one second instability in the 10^-14 region. Technical and systematic uncertainties are investigated and characterized, providing a foundation for future time and frequency transfer experiments among distributed portable optical clocks.

physics.optics↗

arXiv2025

Dual Laser Self-Injection Locking to a Micro Fabry-Perot for Low Phase Noise Millimeter-wave Generation

Low-noise and accessible millimeter-wave sources are critical for emergent telecommunications, radar and sensing applications. Current limitations to realizing low-noise, deployable millimeter-wave systems include size, weight, and power (SWaP) requirements, along with complex operating principles. In this paper we provide a compact photonic implementation for generating low phase noise millimeter-waves, which significantly simplifies the architecture and reduces the volume compared to alternative approaches. Two commercial diode lasers are self-injection-locked to a micro-Fabry-Perot cavity, and their heterodyne provides low phase noise millimeter waves reaching -148 dBc/Hz at 1 MHz offset on a 111.45 GHz carrier. Phase noise characterization at such levels and frequencies poses unique challenges, and we further highlight the capabilities of optically-based measurement techniques. Our approach to millimeter-wave generation can leverage advances in photonic integration for further miniaturization and packaging, thus providing a unique source of accessible, compact, and low-noise millimeter waves.

physics.optics↗

arXiv2024

Photonic Millimeter-wave Generation Beyond the Cavity Thermal Limit

Next-generation communications, radar and navigation systems will extend and exploit the higher bandwidth of the millimeter-wave domain for increased communication data rates as well as radar with higher sensitivity and increased spatial resolution. However, realizing these advantages will require the generation of millimeter-wave signals with low phase noise in simple and compact form-factors. The rapidly developing field of photonic integration addresses this challenge and provides a path toward simplified and portable, low-noise mm-wave generation for these applications. We leverage these advances by heterodyning two silicon photonic chip lasers, phase-locked to the same miniature Fabry-Perot (F-P) cavity to demonstrate a simple framework for generating low-noise millimeter-waves with phase noise below the thermal limit of the F-P cavity. Specifically, we generate 94.5 GHz and 118.1 GHz millimeter-wave signals with phase noise of -117 dBc/Hz at 10 kHz offset, decreasing to -120 dBc/Hz at 40 kHz offset, a record low value for such photonic devices. We achieve this with existing technologies that can be integrated into a platform less than $\approx$ 10 mL in volume. Our work illustrates the significant potential and advantages of low size, weight, and power (SWaP) photonic-sourced mm-waves for communications and sensing.

physics.optics↗

arXiv2024

SUBA-Jet: a new Model for Jets in Heavy Ion Collisions

We present a new model for jet quenching in a quark gluon plasma (QGP). The jet energy loss has two steps. The initial jet parton with a high virtuality loses energy by a perturbative vacuum parton shower modified by medium interactions until it becomes on shell. Subsequent energy loss originates from elastic and radiative collisions with the medium constituents. Coherency of the radiative collisions is achieved by starting with virtual gluons that act as field dressing of the initial jet parton. These are formed according to a Gunion-Bertsch seed. The QCD version of the LPM effect is obtained by increasing the phase of the virtual gluons through elastic scatterings with the medium. Above a phase threshold, the virtual gluons will be formed and can produce coherent radiation themselves. The model has been implemented in a Monte Carlo code and is validated by successfully reproducing the BDMPS-Z prediction for the energy spectrum of radiated gluons in a static medium. Results for the more realistic case, in which the assumptions of the BDMPS-Z approach are released, are also shown. We investigate the influence of various parameters on the energy spectrum and the transverse momentum distribution, such as the in-medium quark masses, the energy transfer in the recoil process, and the phase accumulation criteria, especially for low and intermediate energy gluons.

hep-ph↗

arXiv2024

Tunable X-band opto-electronic synthesizer with ultralow phase noise

Modern communication, navigation, and radar systems rely on low noise and frequency-agile microwave sources. In this application space, photonic systems provide an attractive alternative to conventional microwave synthesis by leveraging high spectral purity lasers and optical frequency combs to generate microwaves with exceedingly low phase noise. However, these photonic techniques suffer from a lack of frequency tunability, and also have substantial size, weight, and power requirements that largely limit their use to laboratory settings. In this work, we address these shortcomings with a hybrid opto-electronic approach that combines simplified optical frequency division with direct digital synthesis to produce tunable low-phase-noise microwaves across the entire X-band. This results in exceptional phase noise at 10 GHz of -156 dBc/Hz at 10 kHz offset and fractional frequency instability of 1x10^-13 at 0.1 s. Spot tuning away from 10 GHz by 500 MHz, 1 GHz, and 2 GHz, yields phase noise at 10 kHz offset of -150 dBc/Hz, -146 dBc/Hz, and -140 dBc/Hz, respectively. The synthesizer architecture is fully compatible with integrated photonic implementations that will enable a versatile microwave source in a chip-scale package. Together, these advances illustrate an impactful and practical synthesis technique that shares the combined benefits of low timing noise provided by photonics and the frequency agility of established digital synthesis.

physics.optics↗

arXiv2023

Higgs interference effects in top-quark pair production in the 1HSM

We present a next-to-leading-order (NLO) study of the process $pp \; ( \to \{ h_1, h_2 \}) \to t\bar{t} + X$ in the 1-Higgs-singlet extension of the Standard Model with an additional heavy Higgs boson $h_2$ that mixes with the light Higgs boson $h_1$. This process is subject to large interference effects between loop-induced Higgs-mediated amplitudes and the QCD continuum background which tend to overcompensate any resonance contributions. A reliable modelling of the resulting top-pair invariant mass shapes requires the inclusion of higher-order QCD corrections, which are presented here. The computation of these NLO corrections is exact in all contributions but in the class of non-factorisable two-loop diagrams which are included in an approximate way such that all infrared singular limits are preserved. We present numerical results for several benchmark points with heavy Higgs masses in the range $700$--$3000$ GeV considering the production of stable top quarks. We find that the interference effects dominate the BSM signal yielding sharp dip structures instead of resonance peaks. The significance and excludability of the BSM effect is explored for the LHC Run 2, Run 3 and HL-LHC.

hep-ph↗

arXiv2023

A New Model for Jet Energy Loss in Heavy Ion Collisions

We present a new model for jet quenching from coherent radiation in a brick medium. The jet energy loss is simulated as a perturbative final-state vacuum parton shower followed by a medium-induced shower originating from elastic and radiative collisions with the medium constituents. Coherency is achieved by starting with trial gluons that act as field dressing of the initial jet parton. These are formed according to a Gunion-Bertsch seed. The QCD version of the LPM effect is attained by increasing the phase of the trial gluons through elastic scatterings with the medium. Above a phase threshold, the trial gluons will be realised and can produce coherent radiation themselves. The model has been implemented in a Monte Carlo code and has been validated by successfully reproducing the BDMPS-Z prediction for the energy spectrum. The realistic case with minimal assumptions are also produced and shown. In particular, we show the influence of various parameters on the energy spectrum and transverse momentum distribution, such as the in-medium quark masses, the energy transfer in the recoil process, and the phase accumulation criteria, especially for low and intermediate energy gluons. Future studies will allow for the interface with full simulations of the quark-gluon-plasma with hydrodynamic evolution, such as vHLLE, along with subsequent hadronisation of the jet partons in order to produce realistic distributions that can be directly compared to LHC and RHIC data.

hep-ph↗

arXiv2022

1-GHz mid-infrared frequency comb spanning 3 to 13 {\mu}m

Mid-infrared (MIR) spectrometers are invaluable tools for molecular fingerprinting and hyper-spectral imaging. Among the available spectroscopic approaches, GHz MIR dual-comb absorption spectrometers have the potential to simultaneously combine the high-speed, high spectral resolution, and broad optical bandwidth needed to accurately study complex, transient events in chemistry, combustion, and microscopy. However, such a spectrometer has not yet been demonstrated due to the lack of GHz MIR frequency combs with broad and full spectral coverage. Here, we introduce the first broadband MIR frequency comb laser platform at 1 GHz repetition rate that achieves spectral coverage from 3 to 13 {\mu}m. This frequency comb is based on a commercially available 1.56 {\mu}m mode-locked laser, robust all-fiber Er amplifiers and intra-pulse difference frequency generation (IP-DFG) of few-cycle pulses in \c{hi}(2) nonlinear crystals. When used in a dual comb spectroscopy (DCS) configuration, this source will simultaneously enable measurements with {\mu}s time resolution, 1 GHz (0.03 cm-1) spectral point spacing and a full bandwidth of >5 THz (>166 cm-1) anywhere within the MIR atmospheric windows. This represents a unique spectroscopic resource for characterizing fast and non-repetitive events that are currently inaccessible with other sources.

physics.optics↗

arXiv2021

Single-cycle all-fiber frequency comb

Single-cycle pulses with deterministic carrier-envelope phase enable the study and control of light-matter interactions at the sub-cycle timescale, as well as the efficient generation of low-noise multi-octave frequency combs. However, current single-cycle light sources are difficult to implement and operate, hindering their application and accessibility in a wider range of research. In this paper, we present a single-cycle 100 MHz frequency comb in a compact, turn-key, and reliable all-silica-fiber format. This is achieved by amplifying 2 $\mu$m seed pulses in heavily-doped Tm:fiber, followed by cascaded self-compression to yield 6.8 fs pulses with 215 kW peak power and 374 mW average power. The corresponding spectrum covers more than two octaves, from below 700 nm up to 3500 nm. Driven by this single-cycle pump, supercontinuum with 180 mW of integrated power and a smooth spectral amplitude between 2100 and 2700 nm is generated directly in silica fibers. To broaden applications,few-cycle pulses extending from 6 $\mu$m to beyond 22 $\mu$m with long-term stable carrier-envelope phase are created using intra-pulse difference frequency, and electro-optic sampling yields comb-tooth-resolved spectra. Our work demonstrates the first all-fiber configuration that generates single-cycle pulses, and provides a practical source to study nonlinear optics on the same timescale.

physics.optics↗

arXiv2020

H1jet, a fast program to compute transverse momentum distributions

We present H1jet, a fast code that computes the total cross section and differential distribution in the transverse momentum of a colour singlet. In its current version, the program implements only leading-order $2\to 1$ and $2\to 2$ processes, but could be extended to higher orders. We discuss the processes implemented in H1jet, give detailed instructions on how to implement new processes, and perform comparisons to existing codes. This tool, mainly designed for theorists, can be fruitfully used to assess deviations of selected new physics models from the Standard Model behaviour, as well as to quickly obtain distributions of relevance for Standard Model phenomenology.

hep-ph↗

arXiv2020

Silicon Dating

In order to service an ever-growing base of legacy electronics, both government and industry customers must turn to third-party brokers for components in short supply or discontinued by the original manufacturer. Sourcing equipment from a third party creates an opportunity for unscrupulous gray market suppliers to insert counterfeit devices: failed, knock-off, or otherwise inferior to the original product. This increases the supplier's profits at the expense of reduced performance/reliability of the customer's system. The most challenging class of counterfeit devices to detect is recycled counterfeits: recovered genuine devices which are re-sold as new. Such devices are difficult to detect because they typically pass performance and parametric tests but fail prematurely due to age-related wear. To address the challenge of detecting recycled devices pre-deployment, we develop Silicon Dating: a low-overhead classifier for detecting recycled integrated circuits using Static Random-Access Memory (SRAM) power-on states. Silicon Dating targets devices with no known-new record or purpose-built anti-recycling hardware. We observe that over time, software running on a device imprints its unique data patterns into SRAM through analog-domain changes; we measure the level and direction of this change through SRAM power-on state statistics. In contrast to highly symmetric power-on states produced by variation during SRAM fabrication, we show that embedded software data is generally highly asymmetric and that the degree of power-on state asymmetry imprinted by software reveals device use. Using empirical results from embedded benchmarks running on several microcontrollers, we show that Silicon Dating identifies recycled devices with 84.1% accuracy with no software-specific knowledge and with 92.0% accuracy by incorporating software knowledge---without prior device enrollment or modification.

cs.CR↗

arXiv2019

Higgs interference effects at the one-loop level in the 1-Higgs-Singlet extension of the Standard Model

A detailed study of Higgs interference effects at the one-loop level in the 1-Higgs-Singlet extension of the Standard Model (1HSM) is presented for the WW and tt decay modes with fully leptonic WW decay. We explore interference effects for benchmark points with a heavy Higgs mass that significantly exceeds 2*m_t. In the WW channel, the Higgs signal and the interfering continuum background are loop induced. In the tt channel, which features a tree-level background, we also calculate the interference with the one-loop background, which, due to the appearance of the absorptive part, is found to dominate the normalisation and shape of differential Higgs distributions and should therefore be considered in experimental analyses. The commonly used geometric average K-factor approximation K_interference ~ (K_Higgs*K_background)^(1/2) is not appropriate. We calculate with massive top and bottom quarks. Our 1HSM and SM implementation in Sherpa+OpenLoops is publicly available and can be used as parton-level integrator or event generator.

hep-ph↗

arXiv2017

Photonic-chip supercontinuum with tailored spectra for precision frequency metrology

Supercontinuum generation using chip-integrated photonic waveguides is a powerful approach for spectrally broadening pulsed laser sources with very low pulse energies and compact form factors. When pumped with a mode-locked laser frequency comb, these waveguides can coherently expand the comb spectrum to more than an octave in bandwidth to enable self-referenced stabilization. However, for applications in frequency metrology and precision spectroscopy, it is desirable to not only support self-referencing, but also to generate low-noise combs with customizable broadband spectra. In this work, we demonstrate dispersion-engineered waveguides based on silicon nitride that are designed to meet these goals and enable precision optical metrology experiments across large wavelength spans. We perform a clock comparison measurement and report a clock-limited relative frequency instability of $3.8\times10^{-15}$ at $\tau = 2$ seconds between a 1550 nm cavity-stabilized reference laser and NIST's calcium atomic clock laser at 657 nm using a two-octave waveguide-supercontinuum comb.

physics.optics↗