arXiv subjects

Alexander Grutter

Publications and source records attributed to Alexander Grutter.

8 recordsLinked to original sources

arXiv2025

Evaluation of carbon incorporation in sulfide thin films grown by hybrid pulsed laser deposition

Vapor-pressure-mismatched materials, such as transition metal chalcogenides, have emerged as key electronic, photonic, and quantum materials. Hybrid pulsed laser deposition (hPLD) has become a preferred method for epitaxial or textured growth of these materials; however, unintentional carbon (C) incorporation remains a persistent concern, particularly when using organic chalcogen precursors as safer alternatives to toxic hydrides. The mechanisms governing C incorporation and its impact on film growth and properties in hPLD remain poorly understood. Here, we investigate the influence of C-containing side products generated from organosulfur precursor pyrolysis on ZnS, BaTiS$_3$, and TiS$_2$ thin films grown by hPLD using tert-butyl disulfide (TBDS). Structural characterization via X-ray diffraction and atomic force microscopy, combined with secondary ion mass spectrometry, is used to systematically examine the effects of growth temperature and TBDS partial pressure on film morphology, crystallinity, and C incorporation. Optimal growth temperatures of 400{\deg}C, 500{\deg}C, and 700{\deg}C are identified for ZnS, TiS$_2$, and BaTiS$_3$, respectively. Growth above or below these temperatures leads to increased C incorporation at both the interface and within the film, correlating with degraded texture. In contrast, highly textured films exhibit minimal C content, comparable to films grown without TBDS. For TiS$_2$, C incorporation depends strongly on TBDS pressure, with 10$^{-1}$ Pa identified as the optimal pressure for minimizing contamination. At higher pressures, loss of preferential texture is observed, likely due to C graphitization poisoning the interface and bulk. These results provide new insight into process-induced C impurities in hPLD-grown chalcogenide thin films and have important implications for sulfide-based thin film technologies.

cond-mat.mtrl-sci↗

arXiv2024

Electrical switching of the perpendicular Neel order in a collinear antiferromagnet

Electrical manipulation of magnetic order by current-induced spin torques lays the foundation for spintronics. One promising approach is encoding information in the N\'eel vector of antiferromagnetic (AFM) materials, particularly to collinear antiferromagnets with the perpendicular magnetic anisotropy (PMA), as the negligible stray fields and terahertz spin dynamics can enable memory devices with higher integration density and ultrafast speed. Here we demonstrate that the N\'eel order information in a prototypical collinear AFM insulator with PMA, Cr2O3, can be reliably readout via the anomalous Hall effect and efficiently switched by the spin-orbit torque (SOT) effect with a low current density of 5.8*106 A/cm2. Moreover, using Cr2O3 as a mediator, we electrically switch the magnetization of a Y3Fe5O12 film exchange-coupled to the Cr2O3 layer, unambiguously confirming the N\'eel order switching of the Cr2O3 layer. This work provides a significant basis for developing AFM memory devices based on collinear AFM materials with PMA.

physics.app-ph↗

arXiv2022

Exchange-biased quantum anomalous Hall effect

The quantum anomalous Hall (QAH) effect is characterized by a dissipationless chiral edge state with a quantized Hall resistance at zero magnetic field. Manipulating the QAH state is of great importance in both the understanding of topological quantum physics and the implementation of dissipationless electronics. Here, we realized the QAH effect in the magnetic topological insulator Cr-doped (Bi,Sb)2Te3 (CBST) grown on an uncompensated antiferromagnetic insulator Al-doped Cr2O3. Through polarized neutron reflectometry (PNR), we find a strong exchange coupling between CBST and Al-Cr2O3 surface spins fixing interfacial magnetic moments perpendicular to the film plane. The interfacial coupling results in an exchange-biased QAH effect. We further demonstrate that the magnitude and sign of the exchange bias can be effectively controlled using a field training process to set the magnetization of the Al-Cr2O3 layer. Our work demonstrates the use of the exchange bias effect to effectively manipulate the QAH state, opening new possibilities in QAH-based spintronics.

cond-mat.mes-hall↗

arXiv2021

Antiferromagnetic VdW Phase at the Interface of Sputtered Topological Insulator/Ferromagnet-Bi2Te3/Ni80Fe20 Heterostructures

Magnetic ordering in topological insulators (TI) is crucial for breaking time-reversal symmetry (TRS) and thereby opening a gap in the topological surface states (TSSs) [1-6], which is the key for realizing useful topological properties such as the quantum anomalous Hall (QAH) effect, axion insulator state and the topological magnetoelectric effect. Combining TIs with magnetic materials can be expected to yield interfaces [26-28] with unique topological and magnetic phases but such interfaces largely remain unexplored. Here, we report the discovery of a novel antiferromagnetic (AFM) Van der Waals (VdW) phase at the interface of a sputtered c-axis oriented TI/FM (Bi2Te3/Ni80Fe20) heterostructure due to the formation of a Ni-intercalated Bi2Te3 VdW interfacial layer. The TI/FM heterostructure is shown to possess a significant spontaneous exchange bias and the presence of an AFM order at the interface via measurements of the hysteresis loop as well as the observation of compensated magnetic moments at the interface using polarized neutron reflectometry (PNR). An in-depth analysis of the structural and chemical properties of the interfacial AFM phase was carried out using selected area electron diffraction (SAED), electron energy loss spectroscopy (EELS), and X-ray photoelectron spectroscopy (XPS). These studies show evidence of solid-state reaction between the intercalated Ni atoms and Bi2Te3 layers and of the formation of topologically nontrivial magnetic VdW compounds. The N\'eel temperature of the interfacial AFM phase is 63 K, which is higher than that of typical magnetic topological insulators [53]. Our study shows how industrial CMOS-process-compatible sputtered TI/FM heterostructures can provide a novel materials platform for exploring the emergence of interfacial topological magnetic phases and high-temperature topological magnetic states.

cond-mat.mtrl-sci↗

arXiv2021

Elucidating proximity magnetism through polarized neutron reflectometry and machine learning

Polarized neutron reflectometry is a powerful technique to interrogate the structures of multilayered magnetic materials with depth sensitivity and nanometer resolution. However, reflectometry profiles often inhabit a complicated objective function landscape using traditional fitting methods, posing a significant challenge to parameter retrieval. In this work, we develop a data-driven framework to recover the sample parameters from polarized neutron reflectometry data with minimal user intervention. We train a variational autoencoder to map reflectometry profiles with moderate experimental noise to an interpretable, low-dimensional space from which sample parameters can be extracted with high resolution. We apply our method to recover the scattering length density profiles of the topological insulator-ferromagnetic insulator heterostructure Bi$_2$Se$_3$/EuS exhibiting proximity magnetism, in good agreement with the results of conventional fitting. We further analyze a more challenging reflectometry profile of the topological insulator-antiferromagnet heterostructure (Bi,Sb)$_2$Te$_3$/Cr$_2$O$_3$ and identify possible interfacial proximity magnetism in this material. We anticipate the framework developed here can be applied to resolve hidden interfacial phenomena in a broad range of layered systems.

cond-mat.mtrl-sci↗

arXiv2020

Emergent electric field control of phase transformation in oxide superlattices

Electric fields can transform materials with respect to their structure and properties, enabling various applications ranging from batteries to spintronics. Recently electrolytic gating, which can generate large electric fields and voltage-driven ion transfer, has been identified as a powerful means to achieve electric-field-controlled phase transformations. The class of transition metal oxides (TMOs) provide many potential candidates that present a strong response under electrolytic gating. However, very few show a reversible structural transformation at room-temperature. Here, we report the realization of a digitally synthesized TMO that shows a reversible, electric-field-controlled transformation between distinct crystalline phases at room-temperature. In superlattices comprised of alternating one-unit-cell of SrIrO3 and La0.2Sr0.8MnO3, we find a reversible phase transformation with a 7% lattice change and dramatic modulation in chemical, electronic, magnetic and optical properties, mediated by the reversible transfer of oxygen and hydrogen ions. Strikingly, this phase transformation is absent in the constituent oxides, solid solutions and larger period superlattices. Our findings open up a new class of materials for voltage-controlled functionality.

cond-mat.mtrl-sci↗

arXiv2018

Exploring interfacial exchange coupling and sublattice effect in heavy metal/ferrimagnetic insulator heterostructures using Hall measurements, x-ray magnetic circular dichroism, and neutron reflectometry

We use temperature-dependent Hall measurements to identify contributions of spin Hall, magnetic proximity, and sublattice effects to the anomalous Hall signal in heavy metal/ferrimagnetic insulator heterostructures with perpendicular magnetic anisotropy. This approach enables detection of both the magnetic proximity effect onset temperature and the magnetization compensation temperature and provides essential information regarding the interfacial exchange coupling. Onset of a magnetic proximity effect yields a local extremum in the temperature-dependent anomalous Hall signal, which occurs at higher temperature as magnetic insulator thickness increases. This magnetic proximity effect onset occurs at much higher temperature in Pt than W. The magnetization compensation point is identified by a sharp anomalous Hall sign change and divergent coercive field. We directly probe the magnetic proximity effect using x-ray magnetic circular dichroism and polarized neutron reflectometry, which reveal an antiferromagnetic coupling between W and the magnetic insulator. Finally, we summarize the exchange-coupling configurations and the anomalous Hall-effect sign of the magnetized heavy metal in various heavy metal/magnetic insulator heterostructures.

cond-mat.mtrl-sci↗

arXiv2018

Polarized Neutron Reflectometry Study of Depth Dependent Magnetization Variation in Co Thin Film on a PMN-PT Substrate

We studied the depth dependent magnetization profile of the magnetostrictive Co thin film layer in a PMN-PT (011)/Ta/Co/Ta structure under both zero and nonzero applied electric field using polarized neutron reflectometry. Application of electric field across the PMN-PT substrate generates a strain, which rotates the magnetization of the Co layer consistent with the Villari effect. At low magnetic fields (near remanence and coercive field conditions), we find that the depth dependent magnetization profile is non-uniform, under both zero and nonzero applied electric fields. These variations are attributable to the depth dependent strain profile in the Co film, as determined by finite element analysis simulations.

cond-mat.mes-hall↗