arXiv subjects

Alex Serb

Publications and source records attributed to Alex Serb.

9 recordsLinked to original sources

arXiv2025

An Energy-Efficient Adiabatic Capacitive Neural Network Chip

Recent advances in artificial intelligence, coupled with increasing data bandwidth requirements, in applications such as video processing and high-resolution sensing, have created a growing demand for high computational performance under stringent energy constraints, especially for battery-powered and edge devices. To address this, we present a mixed-signal adiabatic capacitive neural network chip, designed in a 130$nm$ CMOS technology, to demonstrate significant energy savings coupled with high image classification accuracy. Our dual-layer hardware chip, incorporating 16 single-cycle multiply-accumulate engines, can reliably distinguish between 4 classes of 8x8 1-bit images, with classification results over 95\%, within 2.7\% of an equivalent software version. Energy measurements reveal average energy savings between 2.1x and 6.8x, compared to an equivalent CMOS capacitive implementation.

eess.IV↗

arXiv2025

Views: a hardware-friendly graph database model for storing semantic information

The graph database (GDB) is an increasingly common storage model for data involving relationships between entries. Beyond its widespread usage in database industries, the advantages of GDBs indicate a strong potential in constructing symbolic artificial intelligences (AIs) and retrieval-augmented generation (RAG), where knowledge of data inter-relationships takes a critical role in implementation. However, current GDB models are not optimised for hardware acceleration, leading to bottlenecks in storage capacity and computational efficiency. In this paper, we propose a hardware-friendly GDB model, called Views. We show its data structure and organisation tailored for efficient storage and retrieval of graph data and demonstrate its functional equivalence and storage performance advantage compared to represent traditional graph representations. We further demonstrate its symbolic processing abilities in semantic reasoning and cognitive modelling with practical examples and provide a short perspective on future developments.

cs.DB↗

arXiv2023

An RRAM-Based Implementation of a Template Matching Circuit for Low-Power Analogue Classification

Recent advances in machine learning and neuro-inspired systems enabled the increased interest in efficient pattern recognition at the edge. A wide variety of applications, such as near-sensor classification, require fast and low-power approaches for pattern matching through the use of associative memories and their more well-known implementation, Content Addressable Memories (CAMs). Towards addressing the need for low-power classification, this work showcases an RRAM-based analogue CAM (ACAM) intended for template matching applications, providing a low-power reconfigurable classification engine for the extreme edge. The circuit uses a low component count at 6T2R2M, comparable with the most compact existing cells of this type. In this work, we demonstrate a hardware prototype, built with commercial off-the-shelf (COTS) components for the MOSFET-based circuits, that implements rows of 6T2R2M employing TiOx-based RRAM devices developed in-house, showcasing competitive matching window configurability and definition. Furthermore, through simulations, we validate the performance of the proposed circuit by using a commercially available 180nm technology and in-house RRAM data-driven model to assess the energy dissipation, exhibiting 60 pJ per classification event.

eess.SP↗

arXiv2022

Text Classification in Memristor-based Spiking Neural Networks

Memristors, emerging non-volatile memory devices, have shown promising potential in neuromorphic hardware designs, especially in spiking neural network (SNN) hardware implementation. Memristor-based SNNs have been successfully applied in a wide range of various applications, including image classification and pattern recognition. However, implementing memristor-based SNNs in text classification is still under exploration. One of the main reasons is that training memristor-based SNNs for text classification is costly due to the lack of efficient learning rules and memristor non-idealities. To address these issues and accelerate the research of exploring memristor-based spiking neural networks in text classification applications, we develop a simulation framework with a virtual memristor array using an empirical memristor model. We use this framework to demonstrate a sentiment analysis task in the IMDB movie reviews dataset. We take two approaches to obtain trained spiking neural networks with memristor models: 1) by converting a pre-trained artificial neural network (ANN) to a memristor-based SNN, or 2) by training a memristor-based SNN directly. These two approaches can be applied in two scenarios: offline classification and online training. We achieve the classification accuracy of 85.88% by converting a pre-trained ANN to a memristor-based SNN and 84.86% by training the memristor-based SNN directly, given that the baseline training accuracy of the equivalent ANN is 86.02%. We conclude that it is possible to achieve similar classification accuracy in simulation from ANNs to SNNs and from non-memristive synapses to data-driven memristive synapses. We also investigate how global parameters such as spike train length, the read noise, and the weight updating stop conditions affect the neural networks in both approaches.

cs.NE↗

arXiv2022

A tool for emulating neuromorphic architectures with memristive models and devices

Memristors have shown promising features for enhancing neuromorphic computing concepts and AI hardware accelerators. In this paper, we present a user-friendly software infrastructure that allows emulating a wide range of neuromorphic architectures with memristor models. This tool empowers studies that exploit memristors for online learning and online classification tasks, predicting memristor resistive state changes during the training process. The versatility of the tool is showcased through the capability for users to customise parameters in the employed memristor and neuronal models as well as the employed learning rules. This further allows users to validate concepts and their sensitivity across a wide range of parameters. We demonstrate the use of the tool via an MNIST classification task. Finally, we show how this tool can also be used to emulate the concepts under study in-silico with practical memristive devices via appropriate interfacing with commercially available characterisation tools.

cs.NE↗

arXiv2022

Selectively biased tri-terminal vertically-integrated memristor configuration

Memristors, when utilized as electronic components in circuits, can offer opportunities for the implementation of novel reconfigurable electronics. While they have been used in large arrays, studies in ensembles of devices are comparatively limited. Here we propose a vertically stacked memristor configuration with a shared middle electrode. We study the compound resistive states presented by the combined in-series devices and we alter them either by controlling each device separately, or by altering the full configuration, which depends on selective usage of the middle floating electrode. The shared middle electrode enables a rare look into the combined system, which is not normally available in vertically stacked devices. In the course of this study it was found that separate switching of individual devices carries over its effects to the complete device (albeit non-linearly), enabling increased resistive state range, which leads to a larger number of distinguishable states (above SNR variance limits) and hence enhanced device memory. Additionally, by applying a switching stimulus to the external electrodes it is possible to switch both devices simultaneously, making the entire configuration a voltage divider with individual memristive components. Through usage of this type of configuration and by taking advantage of the voltage division, it is possible to surge-protect fragile devices, while it was also found that simultaneous reset of stacked devices is possible, significantly reducing the required reset time in larger arrays.

physics.app-ph↗

arXiv2022

An FPGA-based System for Generalised Electron Devices Testing

Electronic systems are becoming more and more ubiquitous as our world digitises. Simultaneously, even basic components are experiencing a wave of improvements with new transistors, memristors, voltage/current references, data converters, etc, being designed every year by hundreds of R&D groups world-wide. To date, the workhorse for testing all these designs has been a suite of lab instruments including oscilloscopes and signal generators, to mention the most popular. However, as components become more complex and pin numbers soar, the need for more parallel and versatile testing tools also becomes more pressing. In this work, we describe and benchmark an FPGA system developed that addresses this need. This general purpose testing system features a 64-channel source-meter unit (SMU), and 2x banks of 32 digital pins for digital I/O. We demonstrate that this bench-top system can obtain $170 pA$ current noise floor, $40 ns$ pulse delivery at $\pm13.5 V$ and $12 mA$ maximum current drive/channel. We then showcase the instrument's use in performing a selection of three characteristic measurement tasks: a) current-voltage (IV) characterisation of a diode and a transistor, b) fully parallel read-out of a memristor crossbar array and c) an integral non-linearity (INL) test on a DAC. This work introduces a down-scaled electronics laboratory packaged in a single instrument which provides a shift towards more affordable, reliable, compact and multi-functional instrumentation for emerging electronic technologies.

eess.SP↗

arXiv2022

NeuroPack: An Algorithm-level Python-based Simulator for Memristor-empowered Neuro-inspired Computing

Emerging two terminal nanoscale memory devices, known as memristors, have over the past decade demonstrated great potential for implementing energy efficient neuro-inspired computing architectures. As a result, a wide-range of technologies have been developed that in turn are described via distinct empirical models. This diversity of technologies requires the establishment of versatile tools that can enable designers to translate memristors' attributes in novel neuro-inspired topologies. In this paper, we present NeuroPack, a modular, algorithm level Python-based simulation platform that can support studies of memristor neuro-inspired architectures for performing online learning or offline classification. The NeuroPack environment is designed with versatility being central, allowing the user to chose from a variety of neuron models, learning rules and memristors models. Its hierarchical structure, empowers NeuroPack to predict any memristor state changes and the corresponding neural network behavior across a variety of design decisions and user parameters options. The use of NeuroPack is demonstrated herein via an application example of performing handwritten digit classification with the MNIST dataset and an existing empirical model for metal-oxide memristors.

cs.ET↗

arXiv2020

Frequency Response of Metal-Oxide Memristors

Memristors have been at the forefront of nanoelectronics research for the last decade, offering a valuable component to reconfigurable computing. Their attributes have been studied extensively along with applications that leverage their state-dependent programmability in a static fashion. However, practical applications of memristor-based AC circuits have been rather sparse, with only a few examples found in the literature where their use is emulated at higher frequencies. In this work, we study the behavior of metal-oxide memristors under an AC perturbation in a range of frequencies, from 10^3 to 10^7 Hz. Metal-oxide memristors are found to behave as RC low-pass filters and they present a variable cut-off frequency when their state is switched, thus providing a window of reconfigurability when used as filters. We further study this behaviour across distinct material systems and we show that the usable reconfigurability window of the devices can be tailored to encompass specific frequency ranges by amending the devices' capacitance. This study extends current knowledge on metal-oxide memristors by characterising their frequency dependent characteristics, providing useful insights for their use in reconfigurable AC circuits.

physics.app-ph↗