arXiv ScienceSearch

arXiv subjects

Alessandro Pontillo

Publications and source records attributed to Alessandro Pontillo.

3 recordsLinked to original sources

Modal Parameter Extraction via Propeller-Driven Vibration Testing

Ground Vibration Testing (GVT) supports aircraft certification but often requires lengthy and costly campaigns. Propeller-driven Vibration Testing (PVT) is assessed here as an output-only alternative, in line with Operational Modal Analysis approaches such as Taxi Vibration Testing and Flight Vibration Testing. A cantilever Aluminium 7075-T6 wing spar is instrumented with seven accelerometers and excited by an outboard electric motor and propeller. Seven runs are carried out: a motor-off baseline, five constant-throttle cases, and a manual up-down throttle sweep. The acquired spectra indicate that the dominant resonances remain observable under propeller excitation, while low-throttle conditions introduce narrowband harmonics that may mask structural peaks; the sweep reduces persistent overlap. Modal parameters are identified for the baseline and sweep cases using the Natural Excitation Technique with the Loewner Framework (NExT-LF). The first two modes remain closely matched (Modal Assurance Criterion (MAC) > 0.99), whereas the third mode shows reduced repeatability (MAC = 0.827) and a larger frequency shift, consistent with propeller-induced bending--torsion coupling and non-ideal sweep control. Overall, PVT provides a viable complement to GVT for extracting low-frequency modal information and motivates pursuing future work on automated throttle scheduling and coupling-aware test planning.

eess.SP

Damping Identification Sensitivity in Flutter Speed Estimation

Predicting flutter remains a key challenge in aeroelastic research, with certain models relying on modal parameters, such as natural frequencies and damping ratios. These models are particularly useful in early design stages or for the development of small Unmanned Aerial Vehicles (maximum take-off mass below 7 kg). This study evaluates two frequency-domain system identification methods, Fast Relaxed Vector Fitting (FRVF) and the Loewner Framework (LF), for predicting the flutter onset speed of a flexible wing model. Both methods are applied to extract modal parameters from Ground Vibration Testing data, which are subsequently used to develop a reduced-order model with two degrees of freedom. Results indicate that FRVF and LF-informed models provide reliable flutter speed, with predictions deviating by no more than 3% (FRVF) and 5% (LF) from the N4SID-informed benchmark. The findings highlight the sensitivity of flutter speed predictions to damping ratio identification accuracy and demonstrate the potential of these methods as computationally efficient alternatives for preliminary aeroelastic assessments.

eess.SY

A Paradigm Shift to Assembly-like Finite Element Model Updating

In general, there is a mismatch between a finite element model {(FEM)} of a structure and its real behaviour. In aeronautics, this mismatch must be small because {FEM}s are a fundamental part of the development of an aircraft and of increasing importance with the trend to more flexible wings in modern designs. Iterative finite element model updating can be computationally expensive for complex structures, and surrogate models can be employed to reduce the computational burden. A novel approach for FEM updating, namely assembly-like, is proposed and validated using real experimental data from a flexible wing. The assembly-like model updating framework implies that the model is updated as parts are assembled. Benchmarking against the classical global, or one-shot, approach demonstrates that the proposed method is more computationally efficient, since a normalised workload proxy based on solver-reported model size and memory footprint indicates about 28\% lower overall effort. Aapproximately 95\% of the required solves are performed on lower-fidelity subassembly models with smaller equation counts and memory requirements. Despite the reduced reliance on full-wing evaluations, the new approach retains the fidelity, within 1\% of a joint natural frequencies and modal shapes index, of the global approach.

cs.CE