arXiv subjects

Alessandro Lupoli

Publications and source records attributed to Alessandro Lupoli.

6 recordsLinked to original sources

arXiv2026

Informed Sinogram Interpolation for Sparse View Reconstruction

Computed tomography (CT) has been widely used in medical examinations and non-destructive testing. Micro-CT (microfocus X-ray CT system) is an advanced version that can observe the internal structures of small objects. However, secondary radiation can prevent micro-CT from imaging the full structure of the object. Given the same amount of secondary scans as primary scans, simple subtraction solves the problem at the price of doubled acquisition time. To reduce the acquisition time, one aims to limit the secondary scans to as few imaging angles as possible and interpolate to recover the missing data. Different interpolation methods have been explored for limited-angle tomography, such as polynomial or spline interpolation, compressive sensing, deep learning, etc. In contrast to many of these scenarios, the secondary imaging setup considered in this paper often exhibits simple sinusoidal structures that are not exploited directly by any of the aforementioned approaches. This paper aims to fill this gap with a continuous mathematical model describing the secondary sinogram only with information from the projection space. Building on this model, we propose an interpolation method that effectively interpolates secondary scans from limited observations.

eess.IV↗

arXiv2026

Towards Digital Halftoning on Closed Manifolds--An Error Diffusion Scheme for the $2D$ Torus based on Sigma-Delta Quantization along the Rank-one Lattice

Digital halftoning aims to represent continuous-tone images by binary patterns while preserving their visually relevant low-frequency content. Among the many available approaches, error-diffusion methods implement noise shaping through causal feedback filters and can be interpreted as two-dimensional versions of the signal quantization paradigm Sigma--Delta modulation. On closed domains, however, the terminal state of the underlying recurrence relation need not match the initial one, producing boundary artifacts. We study this problem for bandlimited functions on the two-dimensional torus. By arranging all pixels along a single closed rank-one lattice, we replace the multiple mismatches associated with separately processed rows and columns with a single terminal contribution, while retaining exact reconstruction. For a uniform lattice with $N=M^2+1$ points, we obtain first- and second-order error bounds of order $N^{-1/2}$ and $N^{-1}$. A suitable constant update eliminates the terminal mismatch and reduces the spatial localization of the error without changing these asymptotic orders. For fixed-direction rank-one lattices, the corrected first- and second-order reconstructions instead achieve rates $N^{-1}$ and $N^{-2}$. Numerical experiments illustrate a reduction in boundary artifacts compared with classical schemes applied on the Cartesian grid.

cs.IT↗

arXiv2026

On the reconstruction of bandlimited signals from random samples quantized via noise-shaping

Noise-shaping quantization techniques are widely used for converting bandlimited signals from the analog to the digital domain. They work by ``shaping" the quantization noise so that it falls close to the reconstruction operator's null space. We investigate the compatibility of two such schemes, specifically $ΣΔ$ quantization and distributed noise-shaping quantization, with random samples of bandlimited functions. Suppose $R>1$ is a real number and assume that $\{x_i\}_{i=1}^m$ is a sequence of i.i.d random variables uniformly distributed on $[-\tilde{R},\tilde{R}]$, where $\tilde{R}>R$ is appropriately chosen. We show that by using a noise-shaping quantizer to quantize the (randomly sign flipped) values of a real-valued $π$-bandlimited function $f$ at $\{x_i\}_{i=1}^m$, a function $f^{\sharp}$ can be reconstructed from these quantized values such that $\|f-f^{\sharp}\|_{L^2[-R, R]}$ decays with high probability as $m$ and $\tilde{R}$ increase. This decay holds uniformly over all bandlimited $f$. We emphasize that the sample points $\{x_i\}_{i=1}^m$ are completely random, that is, they have no predefined structure, which makes our findings the first of their kind.

cs.IT↗

arXiv2026

On Trajectory-Based Stability Analysis for $1$-bit Sigma-Delta Quantization and its Application to the Second-Order Case

A state-of-the-art strategy for digitally representing a bandlimited signal $f$ is $ΣΔ$ quantization. $ΣΔ$ quantization schemes choose a bit sequence $(q_n)$ representing the samples $(y_n)$ of $f$ sequentially based on a state sequence $(u_n)$ defined via a recurrence relation of the form \begin{equation*} u_n = (h*u)_n + y_n - q_n, \end{equation*} where $h_j = 0$ for $j\le 0.$ The effectiveness of a quantization scheme crucially depends on the fact that it is stable, i.e. , the state variable remains uniformly bounded in a given class of signals. Thus, a common strategy is to choose $$q_n = \operatorname{sign}((h*u)_n + y_n).$$ It is well known that a sufficient condition for this quantization rule to induce stability is that $$ \|h\|_{\ell^1}+\|f\|_{\infty}\le 2.$$ At the same time, one empirically observes that this condition is conservative and stability holds significantly beyond this bound. In this paper, we address this gap by establishing the first stability guarantees beyond first order that outperform the $\ell^1$ based stability condition. In contrast to many previous approaches, our analysis describes the trajectories of the state variables rather than characterizing the invariant set, an approach that had previously been performed only in some specific example cases. This viewpoint has the main advantage that it makes it possible to treat longer filters, which are difficult to handle through invariant-set analysis because of the resulting high dimensionality. We apply our technique to second-order $ΣΔ$ schemes with sparse feedback filters as proposed by Günturk \cite{gunturk2003one}, showing that the filter length required to guarantee stability significantly improves from the length $O\left(\frac{1}{1-\|f\|_{\infty}}\right)$ needed to apply the $\ell^1$ based criterion to $O\left(\frac{1}{\sqrt{1-\|f\|_{\infty}}}\right)$.

cs.IT↗

arXiv2025

Variably Scaled Kernels for the regularized solution of the parametric Fourier imaging problem

We address the problem of approximating parametric Fourier imaging problems via interpolation/ extrapolation algorithms that impose smoothing constraints across contiguous values of the parameter. Previous works already proved that interpolating via Variably Scaled Kernels (VSKs) the scattered observations in the Fourier domain and then defining the sought approximation via the projected Landweber iterative scheme, turns out to be effective. This study provides new theoretical insights, including error bounds in the image space and properties of the projected Landweber iterative scheme, both influenced by the choice of the scaling function, which characterizes the VSK basis. Such bounds then suggest a smarter solution for the definition of the scaling functions. Indeed, by means of VSKs, the information coded in an image reconstructed for a given parameter is transferred during the reconstruction process to a contiguous parameter value. Benchmark test cases in the field of astronomical imaging, numerically show that the proposed scheme is able to regularize along the parameter direction, thus proving reliable and interpretable results.

math.NA↗

arXiv2024

RIS: Regularized Imaging Spectroscopy for STIX on-board Solar Orbiter

Imaging spectroscopy, i.e., the generation of spatially resolved count spectra and of cubes of count maps at different energies, is one of the main goals of solar hard X-ray missions based on Fourier imaging. For these telescopes, so far imaging spectroscopy has been realized via the generation of either count maps independently reconstructed at the different energy channels, or electron flux maps reconstructed via deconvolution of the bremsstrahlung cross-section. Our aim is to introduce the Regularized Imaging Spectroscopy method (RIS), in which regularization implemented in the count space imposes a smoothing constraint across contiguous energy channels, without the need to deconvolve the bremsstrahlung effect. STIX records imaging data computing visibilities in the spatial frequency domain. Our RIS is a sequential scheme in which part of the information coded in the image reconstructed at a specific energy channel is transferred to the reconstruction process at a contiguous channel via visibility interpolation based on Variably Scaled Kernels. In the case of STIX visibilities recorded during the November 11, 2022 flaring event, we show that RIS is able to generate hard X-ray maps whose morphology smoothly evolves from one energy channel to the contiguous one, and that from these maps it is possible to infer spatially-resolved count spectra characterized by notable numerical stability. We also show that the performances of this approach are robust with respect to both the image reconstruction method and the count energy channel utilized to trigger the sequential process. RIS is appropriate to construct image cubes from STIX visibilities that are characterized by a smooth behavior across count energies, thus allowing the generation of numerically stable (and, thus, physically reliable) local count spectra.

astro-ph.SR↗