arXiv Science⌕ Search

arXiv subjects

Alessandro Ceci

Publications and source records attributed to Alessandro Ceci.

3 recordsLinked to original sources

Direct numerical simulation of turbulent heat transfer in water with temperature-dependent viscosity and conductivity

We study turbulent forced convection of liquid water in a plane channel by direct numerical simulation (DNS), with temperature-dependent viscosity and thermal conductivity. The simulations cover wall heating and cooling, mean-to-wall temperature ratios from 0.83 to 1.3, wall temperatures from 277 to 360\,K and wall Prandtl numbers from 2 to 12. Compared with constant-property flow at the same bulk Reynolds number, the friction coefficient changes by $-39\,\%$ to $+32\,\%$, the heat transfer coefficient referred to the wall Prandtl number changes by up to a factor of $2.3$, and empirical correlations deviate from the DNS by up to $26\,\%$. Instantaneous fields and spectra show that the wall friction Reynolds number misrepresents the range of turbulent scales, whereas near-wall streaks of velocity and temperature have a common spacing when scaled with the local viscous length. The density is constant, so the mean velocity and temperature defects in the core follow those of constant-property flow. To predict friction and heat transfer, we map the mean profiles onto those of constant-property flow through integral transformations derived from the mean momentum and energy balances, with empirical corrections of the eddy viscosity and diffusivity calibrated on the DNS. This approach, developed for air, is extended to liquids, whose conductivity is not proportional to the viscosity and whose Prandtl number varies across the channel. The inverse transformations predict friction and heat transfer within $2\,\%$ of the DNS, except at the lowest Reynolds numbers. The same corrections, introduced in the Spalart--Allmaras model, halve its friction error.

physics.flu-dyn↗

CaLES: A GPU-accelerated solver for large-eddy simulation of wall-bounded flows

We introduce CaLES, a GPU-accelerated finite-difference solver designed for large-eddy simulations (LES) of incompressible wall-bounded flows in massively parallel environments. Built upon the existing direct numerical simulation (DNS) solver CaNS, CaLES relies on low-storage, third-order Runge-Kutta schemes for temporal discretization, with the option to treat viscous terms via an implicit Crank-Nicolson scheme in one or three directions. A fast direct solver, based on eigenfunction expansions, is used to solve the discretized Poisson/Helmholtz equations. For turbulence modeling, the classical Smagorinsky model with van Driest near-wall damping and the dynamic Smagorinsky model are implemented, along with a logarithmic law wall model. GPU acceleration is achieved through OpenACC directives, following CaNS-2.3.0. Performance assessments were conducted on the Leonardo cluster at CINECA, Italy. Each node is equipped with one Intel Xeon Platinum 8358 CPU (2.60 GHz, 32 cores) and four NVIDIA A100 GPUs (64 GB HBM2e), interconnected via NVLink 3.0 (200 GB/s). The inter-node communication bandwidth is 25 GB/s, supported by a DragonFly+ network architecture with NVIDIA Mellanox InfiniBand HDR. Results indicate that the computational speed on a single GPU is equivalent to approximately 15 CPU nodes, depending on the treatment of viscous terms and the subgrid-scale model, and that the solver efficiently scales across multiple GPUs. The predictive capability of CaLES has been tested using multiple flow cases, including decaying isotropic turbulence, turbulent channel flow, and turbulent duct flow. The high computational efficiency of the solver enables grid convergence studies on extremely fine grids, pinpointing non-monotonic grid convergence for wall-modeled LES.

physics.flu-dyn↗

Direct numerical simulation of drag reduction in rotating pipe flow up to $Re_τ \approx 3000$

Direct numerical simulations (DNS) of rotating pipe flows up to $Re_τ \approx 3000$ are carried out to investigate drag reduction effects associated with axial rotation, extending previous studies carried out at a modest Reynolds number (Orlandi & Fatica 1997; Orlandi & Ebstein 2000). The results show that the drag reduction, which we theoretically show to be equivalent to net power saving assuming no mechanical losses, monotonically increases as either the Reynolds number or the rotation number increases, proportionally to the inner-scaled rotational speed. Net drag reduction up to about $70\%$ is observed, while being far from flow relaminarisation. Scaling laws for the mean axial and azimuthal velocity are proposed, from which a predictive formula for the friction factor is derived. The formula can correctly represent the dependency of the friction factor on the Reynolds and rotation numbers, maintaining good accuracy for low-to-moderate rotation numbers. Examination of the turbulent structures highlights the role of rotation in widening and elongating the small-scale streaks, with subsequent suppression of sweeps and ejections. In the core part of the flow, clear weakening of large-scale turbulent motions is observed at high Reynolds numbers, with subsequent suppression of the outer-layer peak in the pre-multiplied spectra. The Fukagata-Iwamoto-Kasagi decomposition indicates that, consistent with a theoretically derived formula, the outer layer yields the largest contribution to drag reduction at increasingly high Reynolds numbers. In contrast, both the inner and the outer layers contribute to drag reduction as the rotation number increases.

physics.flu-dyn↗