arXiv subjects

Alessandro Bazzi

Publications and source records attributed to Alessandro Bazzi.

At least 19 recordsLinked to original sources

arXiv2026

6G-Enabled Cooperative Connected and Automated Mobility: Are We There Yet?

Connected, cooperative, and automated mobility (CCAM) is a key enabler of future intelligent transportation systems, requiring seamless integration of communication, sensing, computing, and automation technologies. This paper surveys the state of the art in CCAM, focusing on key use cases and performance indicators, enabling technologies, system architectures, and standardization and regulatory developments relevant to large-scale deployment. Particular attention is given to cooperative perception, collective awareness, artificial intelligence and machine learning as fundamental building blocks of future CCAM ecosystems. The paper further identifies major research challenges related to scalability, interoperability, and real-time operation in highly dynamic mobile environments. Finally, it outlines future research directions toward achieving large-scale, safe, and resilient CCAM systems supported by next-generation communication networks.

cs.NI↗

arXiv2026

Hardware-in-the-Loop Demo of a Cooperative Intersection where Cars don't Stop

The road transportation sector is undergoing a radical transformation, working for a future where all vehicles will be autonomous and connected. A key challenge in this vision concerns intersections, which will no longer rely on traffic lights or traditional right-of-way rules. Instead, algorithms and communication protocols will be employed to optimize traffic flow. In this context, we are developing a testbed where cars equipped with wireless connectivity exchange information with a remote controller and coordinate their maneuvers. As the vehicles navigate through different types of intersections with various routes, they communicate with the controller, adjusting their speed to pass through intersections without stopping. This demo specifically showcases a hardware-in-the-loop (HiL) implementation of such intelligent intersection, using the SUMO traffic simulator to emulate vehicle positions. Real hardware and software components, which are designed for use in vehicles and roadside infrastructure, are employed to enable real-time data exchange of contextual and control information, running the cooperative coordination algorithm.

cs.AR↗

arXiv2026

Maneuver Coordination Using V2I to Improve Traffic Efficiency at Intersections

Traffic efficiency and air pollutants are major issues in urban transport systems, as they are critical points for traffic flows and people living in urban areas, respectively. In response to this challenge, connected and autonomous vehicles (CAVs) have garnered increasing attention, with the potential to address the above challenges through cooperative maneuvering and real-time communication. In this paper, we consider an intersection served by a multi-access edge computing (MEC) where CAVs communicate with a controller to pass the intersection without the need of signals and without stopping unless in presence of heavy congestion. For this purpose, we propose a first-in-first-scheduled (FIFS) algorithm, and we specify the communication protocol for its practical implementation. The solution is validated through simulations with varying traffic densities, showing that it provides significant gains in travel time and emissions compared to both uncontrolled intersections, with or without traffic lights, and a benchmark solution derived from the literature.

cs.NI↗

arXiv2026

Low Cost C-ITS Stations Using Raspberry Pi and the Open Source Software OScar

The deployment of cooperative-intelligent transport systems (C-ITS) has started, and standardization and research activities are moving forward to improve road safety and vehicular efficiency. An aspect that is still felt as a limitation by the research groups active in the field, is the difficulty to validate the solutions with real hardware and software, because of the huge investments that are needed when multiple equipped vehicles need to be considered. In this work, we present a platform with low-cost hardware based on a Raspberry Pi and a Wi-Fi module transmitting at 5.9 GHz, and on the open-source software Open Stack for Car (OScar), which is compliant with the ETSI C-ITS standards. With a limited cost in the order of 200 EUR, the platform realizes a device which is standard compliant and can be used as either on-board unit (OBU) or road side unit (RSU). The limited cost makes the testbed scalable to several units with limited budget and the limited size makes it also deployable on mini-cars to test advanced connected and autonomous vehicle (CAV) networks and applications. Our tests demonstrate its interoperability with other devices, compliance in terms of power spectrum, and a range of a few hundred meters in line-of-sight (LOS) conditions using the standard settings of ITS-G5.

cs.AR↗

arXiv2026

The Role of Collective Perception and 5G NR-V2X Sidelink in Road Safety

Vehicles and roadside infrastructure are increasingly equipped with sensors capable of perceiving their surroundings. Sharing this information through vehicle-to-everything (V2X) communications is a key enabler of Day-2 applications and is supported by the ETSI collective perception service (CPS). While CPS is expected to play a fundamental role in future intelligent transportation systems, its operation may significantly increase channel load, posing challenges in terms of radio resource utilization, communication reliability, and information management. This paper reviews the current status of CPS standardization and investigates its impact in dense deployment scenarios where connected vehicles communicate through fifth-generation (5G) New Radio-V2X (NR-V2X) sidelink (SL) communications. The main contribution is a realistic evaluation of communication reliability, latency, channel occupancy, and information usefulness under different object-selection strategies for collective perception messages. The analysis is conducted through a network-level simulation framework integrating empirical object traces derived from real-world datasets, thereby avoiding the limitations of synthetic traffic models. Results show that perception message generation and radio access mechanisms are tightly coupled and should be jointly designed to maximize the benefits of collective perception services.

cs.NI↗

arXiv2026

Decentralized Multi-Agent Urban Traffic Management via Spatio-Temporal Mobility Profile Planning

As modern cities face increasingly severe traffic congestion, connected and autonomous vehicles (CAVs) have emerged as a crucial enabling technology for next-generation intelligent traffic management. However, fully realizing this potential is hindered by the limitations of current paradigms. Existing approaches typically optimize localized interactions rather than system-wide efficiency, incur severe communication overhead, or lack the deterministic guarantees required for safe kinematic execution. Furthermore, current multi-agent adaptations are frequently restricted to small predefined scenarios, failing to scale across large and complex urban networks. To bridge this gap, this paper introduces VeloCity, a decentralized multi-agent spatio-temporal mobility profile planning framework designed for CAVs operating in arbitrary urban areas. To minimize vehicles' travel times, VeloCity distributes mobility profile optimization directly to individual CAVs. Vehicles query a localized traffic coordinator for a reservation table, independently compute their fastest conflict-free mobility profile, and reserve their requested space-time slots back with the coordinator. By natively adapting to any arbitrary road topology, the framework manages highly irregular urban areas without requiring scenario-specific tuning, all while guaranteeing collision-free and physically executable vehicle trajectories. Extensive simulations across four large-scale real-world urban maps (Tokyo, Manhattan, Rome, and Bologna) demonstrate the framework's scalability. Compared to established state-of-the-art models, VeloCity yields drastically lower travel times, tightly bounds delay variance, and successfully prevents congestion gridlocks even under extremely high vehicular densities.

cs.MA↗

arXiv2026

Proactive URLLC Adaptation for Connected Vehicles Through ML-Based Channel Prediction

Connected and automated vehicles (CAVs) are expected to increasingly rely on 5G and future 6G ultra-reliable and low-latency communication (URLLC) services to support safety-critical and time-sensitive applications. Since wireless link conditions can vary rapidly in urban vehicular environments, proactively adapting service parameters based on future channel conditions is essential to maintain service continuity and reliability. In this paper, we investigate the use of machine learning (ML) techniques for channel quality prediction in vehicular URLLC scenarios. Specifically, we evaluate deep neural network (DNN) and long short-term memory (LSTM) models to forecast future channel conditions and enable proactive service adaptation with minimized performance degradation. The analysis is conducted using realistic simulations combining the SUMO traffic simulator and the Sionna-RT ray-tracing framework in a real urban environment reconstructed from OpenStreetMap data. Results show that ML-based prediction significantly outperforms approaches relying solely on past channel measurements and achieves performance close to the ideal case in which future channel conditions are perfectly known in advance. These findings demonstrate the potential of ML-driven prediction techniques to enhance the reliability and robustness of URLLC services for connected vehicular systems.

cs.NI↗

arXiv2026

A Practical Implementation of Day-3 Cooperative Intersection with Automated Connected Mini-Cars

Cooperative driving enabled by connected and automated vehicles is expected to improve traffic efficiency and safety, particularly at intersections where traditional control mechanisms such as traffic lights introduce delays and unnecessary stops. Although cooperative intersection management algorithms have been widely studied, experimental demonstrations remain limited. This paper presents a real-time demonstration of cooperative intersection management using connected autonomous mini-cars. The testbed consists of multiple 1:10 scale vehicles equipped with autonomous driving capabilities and wireless communication modules that interact with a centralized controller responsible for scheduling their crossing of the intersection. Vehicles approaching the intersection exchange messages with the controller to set the appropriate mobility profile to traverse the intersection without stopping. The demonstration integrates autonomous driving, wireless communication, and cooperative control in a single experimental platform, providing a practical environment for validating cooperative intersection management concepts for future intelligent transportation systems.

cs.NI↗

arXiv2026

5G NR-V2X Scheduling Approaches for CPM Variable Size Traffic

Collective perception messages (CPMs) introduce significant packet size variability due to dynamic object inclusion and periodic security overhead. While 5G NR-V2X Mode 2 typically employs semi-persistent scheduling (SPS) designed for periodic traffic with relatively stable packet sizes, the impact of realistic CPM-driven size fluctuations on distributed resource allocation remains insufficiently understood. This paper presents a comparative system-level evaluation of NR-V2X Mode 2 scheduling strategies under variable-size CPM traffic reconstructed from real-world perception datasets. We analyze dynamic scheduling and multiple SPS-based approaches, including padding-based allocation, aggressive size-driven reselection, and modulation and coding scheme (MCS) adaptation. Results show that packet size variability can significantly degrade reliability when scheduling stability is compromised. In particular, dynamic scheduling and aggressive reselection increase collision probability due to frequent resource reallocations. In contrast, SPS with padding converges to a stable resource allocation and provides robust performance, while MCS adaptation achieves the highest average packet reception ratio but with uneven reliability across packet types. The findings demonstrate that, under realistic CPM traffic, stability of resource usage is more critical than instantaneous load optimization, and provide design guidelines for CPS deployment over NR-V2X Mode 2.

cs.NI↗

arXiv2026

Can NR-V2X Sidelink support A2A links?

In the context of 5G, 3GPP introduced New Radio vehicle to everything (NR-V2X) for direct vehicle-to-vehicle communication. However, starting from Release 18 the focus of the standard has been expanded from vehicles to any device and use case that can benefit from direct communication. In 3GPP terminology, the standard is now referred to simply as Sidelink communication. This standard allows direct communication between devices based on synchronous resource scheduling. Users can rely on controlled scheduling when in network coverage or, in the absence of coverage, autonomously select resources for transmission via a distributed resource allocation mechanism. Focusing on the autonomous resource allocation, this paper investigates the possibility of applying Release 18 Sidelink communication to Air-to-Air (A2A) links between airborne entities. The paper outlines the main challenges and required modifications to adapt the current standard for longer links in the order of kilometres. The analysis identifies the propagation delay as a critical limitation. Communications at distances over 42.4 km require a restriction of the user's transmitting opportunities. However, sidelink communication remains feasible for distances below this threshold without modifications to the standard.

cs.NI↗

arXiv2026

Dual Orthogonal Projections for Multiuser Interference Cancellation in mmWave Beamforming With Uniform Planar Arrays

This paper investigates multiuser interference (MUI) cancellation for millimeter-wave (mmWave) beamforming in communication systems. We propose a linear algorithm, termed iterative dual orthogonal projections (DOP), which alternates between two orthogonal projections: one to eliminate MUI and the other to refine combiners, ensuring empirical convergence in spectral efficiency. Simulation results show that, with each iteration, the spectral efficiency of each user converges rapidly, closely approaching the theoretical optimum determined by dirty paper coding (DPC), surpassing existing linear benchmarks while maintaining low computational complexity. Furthermore, the proposed DOP algorithm is extended to support both fully-digital and hybrid beamforming architectures.

eess.SP↗

arXiv2026

Open-Source Based and ETSI Compliant Cooperative, Connected, and Automated Mini-Cars

The automotive sector is following a revolutionary path from vehicles controlled by humans to vehicles that will be fully automated, fully connected, and ultimately fully cooperative. Along this road, new cooperative algorithms and protocols will be designed and field tested, which represents a great challenge in terms of costs. In this context, in particular, moving from simulations to practical experiments requires huge investments that are not always affordable and may become a barrier in some cases. To solve this issue and provide the community with an intermediate step, we here propose the use of 1:10 scaled cooperative, autonomous, and connected mini-cars. The mini-car is equipped with a Jetson Orin board running the open Robot Operating System 2 (ROS2), sensors for autonomous operations, and a Raspberry Pi board for connectivity mounting the open source Open Stack for Car (OScar). A key aspect of the proposal is the use of OScar, which implements a full ETSI cooperative-intelligent transport systems (C-ITS) compliant stack. The feasibility and potential of the proposed platform is here demonstrated through the implementation of a case study where the Day-1 intersection collision warning (ICW) application is implemented and validated.

cs.RO↗

arXiv2026

Analysis of Proactive Uncoordinated Techniques to Mitigate Interference in FMCW Automotive Radars

Modern vehicles increasingly rely on advanced driver-assistance systems (ADAS), with radars playing a key role due to their cost-effectiveness and reliable performance. However, the growing number of radars operating in the same spectrum raises concerns about mutual interference, which could lead to system malfunctions and potential safety risks. This study focuses on a scenario in which all vehicles are equipped with frequency-modulated continuous-wave (FMCW) radars, and it assesses the impact of interference on radar functionality - expressed in terms of probability of failure - by considering both direct and reflected signals. The radars may employ one of the following proactive mitigation methods to reduce the impact of interference, all of which require no inter-vehicle coordination but differ in complexity: (i) random carrier-frequency hopping on a frame-by-frame basis, (ii) random carrier-frequency hopping on a chirp-by-chirp basis, and (iii) a directional, compass-based method specifically addressing interference from opposite directions, which can be combined with either of the two previous methods. In this work, we assume realistic simulated road traffic scenarios and develop a novel model that captures correlated interference and accounts for the main radar setting parameters. Results reveal that dense scenarios pose a high risk of radar malfunctions. Among the analyzed methods, chirp-by-chirp frequency hopping emerges as the most effective approach to mitigate interference and ensure system reliability, but only when combined with a sufficiently large bandwidth. The compass-based method, on the other hand, shows limited effectiveness and appears not worth the additional system complexity.

cs.NI↗

arXiv2026

V2N-Based Algorithm and Communication Protocol for Autonomous Non-Stop Intersections

Intersections are critical areas for road safety and traffic efficiency, accounting for a significant portion of vehicle crashes and fatalities. While connected and autonomous vehicle (CAV) technologies offer a promising solution for autonomous intersection management, many existing proposals either rely on computationally heavy centralized controllers or overlook the practical impairments of real-world communication networks. This paper introduces seamless mobility of vehicles over intersections (Moveover), a novel algorithm comprising a vehicle-to-network (V2N) communication protocol designed to let vehicles cross autonomous intersections without stopping. Moveover delegates trajectory and speed profile selection to individual vehicles, allowing each CAV to optimize them according to its unique kinematic characteristics. Simultaneously, a local intersection controller prevents collisions through deterministic conflict zone reservations. The algorithm is rigorously evaluated under both ideal and non-ideal networking conditions, specifically modeling 4G and 5G communication delays, across multiple layouts including single-lane, multi-lane, and roundabouts. Furthermore, we test Moveover on a real urban map with multiple intersections. Simulation results demonstrate that Moveover significantly outperforms baseline strategies, offering substantial improvements in travel times and reduced pollutant emissions.

cs.NI↗

arXiv2026

Exploiting Repetitions and Interference Cancellation for the 6G-V2X Sidelink Autonomous Mode

In recent years, the Third Generation Partnership Project (3GPP) has developed the new radio-vehicle-to-everything (NR-V2X) sidelink standard, to enable direct communication between connected and autonomous vehicles (CAVs). Users can autonomously select radio resources for their transmissions with the Mode 2 channel access scheme, which can also operate under out-of-coverage conditions. However, Mode 2 performance is hindered by interference and packet collisions arising from dynamic mobile environments and limitations in assessing radio resource availability. The 3GPP specifications allow transmitting multiple copies of the same packet to improve reliability, though at the cost of increased channel congestion. This paper proposes to leverage receivers equipped with successive interference cancellation (SIC) capabilities, to exploit packet repetitions. Specifically, once a packet is successfully decoded the interfering contribution carried by repetitions can be cancelled from future or past received signals, enabling the decoding of new packets. Extensive highway scenario simulations demonstrate that the proposed solution significantly outperforms the legacy Mode 2 scheme, especially under high interference conditions, achieving improvements exceeding 100% in some cases.

cs.NI↗

arXiv2025

AREE-Based Decoupled Design of Hybrid Beamformers in mmWave XL-MIMO Systems

Hybrid beamforming has been widely employed in mmWave communications such as vehicular-to-everything (V2X) scenarios, as a compromise between hardware complexity and spectral efficiency. However, the inherent coupling between analog and digital precoders in hybrid array architecture significantly limits the computational and spectral efficiency of existing algorithms. To address this issue, we propose an alternating residual error elimination (AREE) algorithm, which decomposes the hybrid beamforming problem into two low-dimensional subproblems, each exhibiting a favorable matrix structure that enables effective decoupling of analog and digital precoders from the matrix product formulation. These subproblems iteratively eliminate each other's residual errors, driving the original problem toward the optimal hybrid beamforming performance. The proposed initialization ensures rapid convergence, while a low-complexity geometric channel SVD algorithm is developed by transforming the high-dimensional sparse channel into a low-dimensional equivalent, thereby simplifying the derivation of subproblems. Simulation results demonstrate that the AREE algorithm effectively decouples analog and digital precoders with low complexity, achieves fast convergence, and offers higher spectral efficiency than existing beamforming methods.

eess.SP↗

arXiv2023

Multi-Channel Operation for the Release 2 of ETSI Cooperative Intelligent Transport Systems

Vehicles and road infrastructure are starting to be equipped with vehicle-to-everything (V2X) communication solutions to increase road safety and provide new services to drivers and passengers. In Europe, the deployment is based on a set of Release 1 standards developed by ETSI to support basic use cases for cooperative intelligent transport systems (C-ITS). For them, the capacity of a single 10 MHz channel in the ITS band at 5.9 GHz is considered sufficient. At the same time, the ITS stakeholders are working towards several advanced use cases, which imply a significant increment of data traffic and the need for multiple channels. To address this issue, ETSI has recently standardized a new multi-channel operation (MCO) concept for flexible, efficient, and future-proof use of multiple channels. This new concept is defined in a set of new specifications that represent the foundation for the future releases of C-ITS standards. The present paper provides a comprehensive review of the new set of specifications, describing the main entities extending the C-ITS architecture at the different layers of the protocol stack, In addition, the paper provides representative examples that describe how these MCO standards will be used in the future and discusses some of the main open issues arising. The review and analysis of this paper facilitate the understanding and motivation of the new set of Release 2 ETSI specifications for MCO and the identification of new research opportunities.

cs.NI↗

arXiv2022

A Methodology for Abstracting the Physical Layer of Direct V2X Communications Technologies

Recent advancements in V2X communications have greatly increased the flexibility of the physical and medium access control (MAC) layers. This increases the complexity when investigating the system from a network perspective to evaluate the performance of the supported applications. Such flexibility needs in fact to be taken into account through a cross-layer approach, which might lead to challenging evaluation processes. As an accurate simulation of the signals appears unfeasible, a typical solution is to rely on simple models for incorporating the physical layer of the supported technologies, based on off-line measurements or accurate link-level simulations. Such data is however limited to a subset of possible configurations and extending them to others is costly when not even impossible. The goal of this paper is to develop a new approach for modelling the physical layer of vehicle-to-everything (V2X) communications that can be extended to a wide range of configurations without leading to extensive measurement or simulation campaign at the link layer. In particular, given a scenario and starting from results in terms of packet error rate (PER) vs. signal-to-interference-plus-noise ratio (SINR) related to a subset of possible configurations, we derive one parameter, called implementation loss, that is then used to evaluate the network performance under any configuration in the same scenario. The proposed methodology, leading to a good trade-off among complexity, generality, and accuracy of the performance evaluation process, has been validated through extensive simulations with both IEEE 802.11p and LTE-V2X sidelink technologies in various scenarios.

cs.NI↗