arXiv subjects

Aldebaro Klautau

Publications and source records attributed to Aldebaro Klautau.

At least 19 recordsLinked to original sources

arXiv2026

Ray Tracing-Based LoRaWAN Gateway Placement for Reliable Connectivity in Amazonian Regions

Network planning is an important task in wireless communications, as it helps network operators avoid unnecessary costs. In the context of the internet of things, using long-range wide-area network technologies in the Amazon rainforest, a key challenge is ensuring reliable communication between end-devices and gateways (GWs). In this sense, this reliability is strongly affected by channel conditions. Thus, during the planning phase, choosing the appropriate channel model is an important decision for accurate simulations. Given this motivation, in this work, we propose an optimization model to evaluate the impact of different types of channels on coverage and packet delivery ratio in a forest scenario. We used channels from ray tracing, empirical, and stochastic approaches to assess how decisions made during the network planning phase, in terms of the channel used, affect GW placement and, specifically, the percentage of end-devices covered and the reliability of the communication system. Our results show that GW placement based on site-independent channels can overestimate the number of GWs required to meet the network requirements, whereas using site-specific channels allows us to satisfy the same requirements with fewer GWs.

cs.NI↗

arXiv2026

LoRaWAN Gateway Placement for Network Planning Using Ray Tracing-Based Channel Models

Network planning for long range wide area networks (LoRaWAN) relies heavily on the channel models used to estimate wireless coverage and connectivity. Consequently, the quality of gateway (GW) deployment decisions may be strongly affected by the propagation assumptions adopted during the planning process. Given this motivation, this work investigates how different channel models influence the placement of LoRaWAN GWs,formulating an optimization problem that contrasts stochastic and empirical models with ray-tracing-based models. To this end, we developed a framework that integrates ray tracing (RT) simulators with a discrete-event network simulator. Using this framework to generate LoRaWAN data metrics, we employ an optimization model that determines the optimal GW placement under different channel models, received power constraints, and network scenarios. Our results show that the optimized solution is highly sensitive to the chosen channel model, even when considering the same scenarios with different RT simulators, revealing a clear trade-off between computational cost and the fidelity of the solution to real-world conditions.

cs.NI↗

arXiv2025

Toward Scalable VR-Cloud Gaming: An Attention-aware Adaptive Resource Allocation Framework for 6G Networks

Virtual Reality Cloud Gaming (VR-CG) represents a demanding class of immersive applications, requiring high bandwidth, ultra-low latency, and intelligent resource management to ensure optimal user experience. In this paper, we propose a scalable and QoE-aware multi-stage optimization framework for resource allocation in VR-CG over 6G networks. Our solution decomposes the joint resource allocation problem into three interdependent stages: (i) user association and communication resource allocation; (ii) VR-CG game engine placement with adaptive multipath routing; and (iii) attention-aware scheduling and wireless resource allocation based on motion-to-photon latency. For each stage, we design specialized heuristic algorithms that achieve near-optimal performance while significantly reducing computational time. We introduce a novel user-centric QoE model based on visual attention to virtual objects, guiding adaptive resolution and frame rate selection. A dataset-driven evaluation demonstrates that, when compared against state-of-the-art approaches, our framework improves QoE by up to 50\%, reduces communication resource usage by 75\%, and achieves up to 35\% cost savings, while maintaining an average optimality gap of 5\%. Our proposed heuristics solve large-scale scenarios in under 0.1 seconds, highlighting their potential for real-time deployment in next-generation mobile networks.

cs.NI↗

arXiv2025

DL-Based Beam Management for mmWave Vehicular Networks Exploring Temporal Correlation

Millimeter wave communications are essential for modern wireless networks. It supports high data rates but suffers from severe path loss, which requires precise beam alignment to maintain reliable links. This beam management is particularly challenging in highly dynamic scenarios such as vehicle-to-infrastructure, and several methods have been presented. In this work, we propose a deep learning-based beam tracking framework that combines a position-aware beam pre-selection strategy with sequential prediction using recurrent neural networks. The proposed architecture can support deep learning models trained for both classification and regression. In contrast to many existing studies that evaluate beam tracking under predominantly line-of-sight (LOS) conditions, our work explicitly includes highly challenging non-LOS scenarios - with up to 50% non-LOS incidence in certain datasets - to rigorously assess model robustness. Experimental results demonstrate that our approach maintains high top-K accuracy, even under adverse conditions, while reducing the beam measurement overhead by up to 50%.

eess.SP↗

arXiv2025

Towards a Robust Transport Network With Self-adaptive Network Digital Twin

The ability of the Network digital twin (NDT) to remain aware of changes in its physical counterpart, known as the physical twin (PTwin), is a fundamental condition to enable timely synchronization, also referred to as twinning. In this way, considering a transport network, a key requirement is to handle unexpected traffic variability and dynamically adapt to maintain optimal performance in the associated virtual model, known as the virtual twin (VTwin). In this context, we propose a self-adaptive implementation of a novel NDT architecture designed to provide accurate delay predictions, even under fluctuating traffic conditions. This architecture addresses an essential challenge, underexplored in the literature: improving the resilience of data-driven NDT platforms against traffic variability and improving synchronization between the VTwin and its physical counterpart. Therefore, the contributions of this article rely on NDT lifecycle by focusing on the operational phase, where telemetry modules are used to monitor incoming traffic, and concept drift detection techniques guide retraining decisions aimed at updating and redeploying the VTwin when necessary. We validate our architecture with a network management use case, across various emulated network topologies, and diverse traffic patterns to demonstrate its effectiveness in preserving acceptable performance and predicting quality of service (QoS) metrics under unexpected traffic variation, such as delay and jitter. The results in all tested topologies, using the normalized mean square error as the evaluation metric, demonstrate that our proposed architecture, after a traffic concept drift, achieves a performance improvement in per-flow delay and jitter prediction of at least 64% and 21%, respectively, compared to a configuration without NDT synchronization.

cs.NI↗

arXiv2025

Network Digital Twin for Route Optimization in 5G/B5G Transport Slicing with What-If Analysis

The advent of fifth-generation (5G) and Beyond 5G (B5G) networks introduces diverse service requirements, from ultra-low latency to high bandwidth, demanding dynamic monitoring and advanced solutions to ensure Quality of Service (QoS). The transport network - responsible for interconnecting the radio access network and core networks - will increasingly face challenges in efficiently managing complex traffic patterns. The Network Digital Twin (NDT) concept emerges as a promising solution for testing configurations and algorithms in a virtual network before real-world deployment. In this context, this work designs an experimental platform with NDT in a transport network domain, synchronizing with the virtual counterpart and a recommendation system for what-if analysis, enabling intelligent decision-making for dynamic route optimization problems in 5G/B5G scenarios. Our NDT, composed of a Graph Neural Network (GNN), was evaluated across three different network topologies consisting of 8, 16, and 30 nodes. It achieved lower MAPE values for URLLC and eMBB slices, comparing latency predictions with actual latency after the solution implementation. These values indicate high accuracy, demonstrating the solution's effectiveness in generating precise insights into network performance if a particular solution were implemented.

cs.NI↗

arXiv2025

Accelerating Ray Tracing-Based Wireless Channels Generation for Real-Time Network Digital Twins

Ray tracing (RT) simulation is a widely used approach to enable modeling wireless channels in applications such as network digital twins. However, the computational cost to execute ray tracing (RT) is proportional to factors such as the level of detail used in the adopted 3D scenario. This work proposes RT pre-processing algorithms that aim at simplifying the 3D scene without distorting the channel, by reducing the scenario area and/or simplifying object shapes in the scenario. It also proposes a post-processing method that augments a set of RT results to achieve an improved time resolution. These methods enable using RT in applications that use a detailed and photorealistic 3D scenario while generating consistent wireless channels over time. Our simulation results with different urban scenarios scales, in terms of area and object details, demonstrate that it is possible to reduce the simulation time by more than 50% without compromising the accuracy of the multipath RT parameters, such as angles of arrival and departure, delay, phase, and path gain.

cs.NI↗

arXiv2025

Intent-based Radio Scheduler for RAN Slicing: Learning to deal with different network scenarios

The future mobile network has the complex mission of distributing available radio resources among various applications with different requirements. The radio access network slicing enables the creation of different logical networks by isolating and using dedicated resources for each group of applications. In this scenario, the radio resource scheduling (RRS) is responsible for distributing the radio resources available among the slices to fulfill their service-level agreement (SLA) requirements, prioritizing critical slices while minimizing the number of intent violations. Moreover, ensuring that the RRS can deal with a high diversity of network scenarios is essential. Several recent papers present advances in machine learning-based RRS. However, the scenarios and slice variety are restricted, which inhibits solid conclusions about the generalization capabilities of the models after deployment in real networks. This paper proposes an intent-based RRS using multi-agent reinforcement learning in a radio access network (RAN) slicing context. The proposed method protects high-priority slices when the available radio resources cannot fulfill all the slices. It uses transfer learning to reduce the number of training steps required. The proposed method and baselines are evaluated in different network scenarios that comprehend combinations of different slice types, channel trajectories, number of active slices and users' equipment (UEs), and UE characteristics. The proposed method outperformed the baselines in protecting slices with higher priority, obtaining an improvement of 40% and, when considering all the slices, obtaining an improvement of 20% in relation to the baselines. The results show that by using transfer learning, the required number of training steps could be reduced by a factor of eight without hurting performance.

cs.NI↗

arXiv2024

Machine Learning-Based mmWave MIMO Beam Tracking in V2I Scenarios: Algorithms and Datasets

This work investigates the use of machine learning applied to the beam tracking problem in 5G networks and beyond. The goal is to decrease the overhead associated to MIMO millimeter wave beamforming. In comparison to beam selection (also called initial beam acquisition), ML-based beam tracking is less investigated in the literature due to factors such as the lack of comprehensive datasets. One of the contributions of this work is a new public multimodal dataset, which includes images, LIDAR information and GNSS positioning, enabling the evaluation of new data fusion algorithms applied to wireless communications. The work also contributes with an evaluation of the performance of beam tracking algorithms, and associated methodology. When considering as inputs the LIDAR data, the coordinates and the information from previously selected beams, the proposed deep neural network based on ResNet and using LSTM layers, significantly outperformed the other beam tracking models.

eess.SP↗

arXiv2024

CAVIAR: Co-simulation of 6G Communications, 3D Scenarios and AI for Digital Twins

Digital twins are an important technology for advancing mobile communications, specially in use cases that require simultaneously simulating the wireless channel, 3D scenes and machine learning. Aiming at providing a solution to this demand, this work describes a modular co-simulation methodology called CAVIAR. Here, CAVIAR is upgraded to support a message passing library and enable the virtual counterpart of a digital twin system using different 6G-related simulators. The main contributions of this work are the detailed description of different CAVIAR architectures, the implementation of this methodology to assess a 6G use case of UAV-based search and rescue mission (SAR), and the generation of benchmarking data about the computational resource usage. For executing the SAR co-simulation we adopt five open-source solutions: the physical and link level network simulator Sionna, the simulator for autonomous vehicles AirSim, scikit-learn for training a decision tree for MIMO beam selection, Yolov8 for the detection of rescue targets and NATS for message passing. Results for the implemented SAR use case suggest that the methodology can run in a single machine, with the main demanded resources being the CPU processing and the GPU memory.

cs.NI↗

arXiv2022

Simulation of machine learning-based 6G systems in virtual worlds

Digital representations of the real world are being used in many applications, such as augmented reality. 6G systems will not only support use cases that rely on virtual worlds but also benefit from their rich contextual information to improve performance and reduce communication overhead. This paper focuses on the simulation of 6G systems that rely on a 3D representation of the environment, as captured by cameras and other sensors. We present new strategies for obtaining paired MIMO channels and multimodal data. We also discuss trade-offs between speed and accuracy when generating channels via ray tracing. We finally provide beam selection simulation results to assess the proposed methodology.

eess.SP↗

arXiv2021

5G MIMO Data for Machine Learning: Application to Beam-Selection using Deep Learning

The increasing complexity of configuring cellular networks suggests that machine learning (ML) can effectively improve 5G technologies. Deep learning has proven successful in ML tasks such as speech processing and computational vision, with a performance that scales with the amount of available data. The lack of large datasets inhibits the flourish of deep learning applications in wireless communications. This paper presents a methodology that combines a vehicle traffic simulator with a raytracing simulator, to generate channel realizations representing 5G scenarios with mobility of both transceivers and objects. The paper then describes a specific dataset for investigating beams-election techniques on vehicle-to-infrastructure using millimeter waves. Experiments using deep learning in classification, regression and reinforcement learning problems illustrate the use of datasets generated with the proposed methodology

eess.SP↗

arXiv2021

Generating MIMO Channels For 6G Virtual Worlds Using Ray-tracing Simulations

Some 6G use cases include augmented reality and high-fidelity holograms, with this information flowing through the network. Hence, it is expected that 6G systems can feed machine learning algorithms with such context information to optimize communication performance. This paper focuses on the simulation of 6G MIMO systems that rely on a 3-D representation of the environment as captured by cameras and eventually other sensors. We present new and improved Raymobtime datasets, which consist of paired MIMO channels and multimodal data. We also discuss tradeoffs between speed and accuracy when generating channels via ray-tracing. We finally provide results of beam selection and channel estimation to assess the impact of the improvements in the ray-tracing simulation methodology.

eess.SP↗

arXiv2021

System Intelligence for UAV-Based Mission Critical with Challenging 5G/B5G Connectivity

Unmanned aerial vehicles (UAVs) and communication systems are fundamental elements in Mission Critical services, such as search and rescue. In this article, we introduce an architecture for managing and orchestrating 5G and beyond networks that operate over a heterogeneous infrastructure with UAVs' aid. UAVs are used for collecting and processing data, as well as improving communications. The proposed System Intelligence (SI) architecture was designed to comply with recent standardization works, especially the ETSI Experiential Networked Intelligence specifications. Another contribution of this article is an evaluation using a testbed based on a virtualized non-standalone 5G core and a 4G Radio Access Network (RAN) implemented with open-source software. The experimental results indicate, for instance, that SI can substantially improve the latency of UAV-based services by splitting deep neural networks between UAV and edge or cloud equipment. Other experiments explore the slicing of RAN resources and efficient placement of virtual network functions to assess the benefits of incorporating intelligence in UAV-based mission-critical services.

cs.NI↗

arXiv2020

Ray-Tracing 5G Channels from Scenarios with Mobility Control of Vehicles and Pedestrians

Millimeter waves is one of 5G networks strategies to achieve high bit rates. Measurement campaigns with these signals are difficult and require expensive equipment. In order to generate realistic data this paper refines a methodology for virtual measurements of 5G channels, which combines a simulation of urban mobility with a ray-tracing simulator. The urban mobility simulator is responsible for controlling mobility, positioning pedestrians and vehicles throughout each scene while the ray-tracing simulator is repeatedly invoked, simulating the interactions between receivers and transmitters. The orchestration among both simulators is done using a Python software. To check how the realism can influence the computational cost, it was made a numerical analyze between the number of faces and the simulation time.

eess.SP↗

arXiv2020

Testbed for Connected Artificial Intelligence using Unmanned Aerial Vehicles and Convolutional Pose Machines

Unmanned Aerial Vehicles (UAVs) became very popular in a vast number of applications in recent years, especially drones with computer vision functions enabled by on-board cameras and embedded systems. Many of them apply object detection using data collected by the integrated camera. However, several applications of real-time object detection rely on Convolutional Neural Networks (CNNs) which are computationally expensive and processing CNNs on a UAV platform is challenging (due to its limited battery life and limited processing power). To understand the effects of these issues, in this paper we evaluate the constraints and benefits of processing the whole data in the UAV versus in an edge computing device. We apply Convolutional Pose Machines (CPMs) known as OpenPose for the task of articulated pose estimation. We used this information to detect human gestures that are used as input to send commands to control the UAV. The experimental results using a real UAV indicate that the edge processing is more efficient and faster (w.r.t battery consumption and the delay in recognizing the human pose and the command given to the drone) than UAV processing and then could be more suitable for CNNs based applications.

eess.SP↗

arXiv2020

Virtualized C-RAN Orchestration with Docker, Kubernetes and OpenAirInterface

Virtualization is a key feature in Cloud Radio Access Network (C-RAN). It can help to save costs since it allows the use of virtualized base stations instead of physically deployment in different areas. However, the creation and management of virtual base stations pools is not trivial and introduces new challenges to C-RAN deployment. This paper reports a method to orchestrate and manage a container-based C-RAN. We used several instances of the OpenAirInterface software running on Docker containers, and orchestrated them using Kubernetes. We demonstrate that using Kubernetes it is possible to dynamically scale remote radio heads (RRHs) and baseband units (BBUs) according to requirements of the network and parameters such as the server resources usage.

eess.SP↗

arXiv2020

Downlink Fronthaul Compression in Frequency Domain using OpenAirInterface

This paper presents a compression scheme developed for the transport of downlink radio signals in packet fronthaul of centralized-radio access networks (C-RAN). The technique is tailored to frequency-domain functional splits, in which inactive LTE (or 5G NR) resource elements may not be transmitted in the packets. This allows decreasing the link data rate, especially when the cell load is low. The compression scheme is based on two parts: transmission of side information to indicate active and inactive resource elements of the LTE, and nonuniform scalar quantization to compress the QAM symbols of the active resource elements. The method was implemented in the OpenAirInterface (OAI) software for real-time evaluation. The testbed results show a significant reduction in link usage with a low computational cost.

eess.SP↗