arXiv subjects

Alberto Scacchi

Publications and source records attributed to Alberto Scacchi.

16 recordsLinked to original sources

arXiv2026

A route to the thermodynamics of colloid-polymer mixtures from structural information

Liquid-state theory provides a fundamental connection between microscopic structure and macroscopic thermodynamic behaviour. Here, we develop a framework for predicting thermodynamics and phase behaviour directly from structural correlations, using either radial distribution functions or static structure factors as input. The approach constructs a free-energy functional from structural information obtained at a single thermodynamic state point, without requiring explicit knowledge of the underlying interaction potentials. This circumvents a central difficulty in modelling complex fluids, for which effective interactions are often unknown or rely on approximations. We demonstrate the framework for a range of model fluids, including colloidal and colloid--polymer systems, with predictions in good agreement with molecular simulation data. The results show that structural information at a single state point can provide sufficient information to predict the broader thermodynamic response of a system. This establishes a route toward inferring phase behaviour directly from experimentally measured structure, even when the microscopic interactions are not known a priori.

cond-mat.soft↗

arXiv2025

Active Rosensweig Patterns

Ferrofluids, colloidal dispersions of magnetic nanoparticles, are renowned for pattern formation like few other materials. The Rosensweig instability of a horizontal ferrofluid-air interface in perpendicular magnetic field is especially well known classically, this instability sets the air-ferrofluid interface into an array of spikes that correspond to a new free energy minimum of the system. However, once the pattern is formed, it does not exhibit any notable thermal or non-equilibrium fluctuations, i.e., it is passive. In this work, we present an active version of the Rosensweig patterns. We realize them experimentally by driving a dispersion of magnetic nanoparticles with an electric field into a non-equilibrium gradient state and by inducing the instability using a magnetic field. The coupling of electric and magnetic forcing leads to patterns that can be adjusted from quiescent classic Rosensweig-like behavior (at low activity) to highly dynamic ones displaying peak and defect dynamics, as well as tunability of structure periodicities beyond what is possible in the classic systems (at high activity). We analyze the results using an active agent-based approach as well as a continuum perspective. We construct a simple equilibrium-like effective Rosensweig model to describe the onset of the patterns and propose a minimal Swift-Hohenberg type model capturing the essential active pattern dynamics. Our results suggest that classic continuum systems exhibiting pattern formation can be activated to display life-inspired non-equilibrium phenomena.

cond-mat.soft↗

arXiv2025

General approach for partitioning and phase separation in macromolecular coexisting phases

Partitioning of (bio)materials in polymeric mixtures is a key phenomenon both in cellular environments, as well as in industrial applications. In cells, several macromolecules are suspended within different biomolecular phases. On the other hand, the coexistence of polymeric aqueous phases has been exploited for the extraction and purification of (bio)materials suspended in water. Despite its relevance, key physical and chemical properties controlling the phase behavior of these complex systems are still lacking. Here, we have developed a classical density functional theory approach for describing the phase coexistence and partitioning of an arbitrary number of polymers and suspended materials. As a case example, we focus on a binary mixture of phase separating polymers in which a third material is dispersed. We explore the effect of size ratios and affinities between the different materials and address their distribution and coexisting densities, and find optimal conditions for partitioning.

cond-mat.soft↗

arXiv2024

Adsorption of polyelectrolytes in the presence of varying dielectric discontinuity between solution and substrate

We examine the interactions between polyelectrolytes (PEs) and uncharged substrates at conditions corresponding to a dielectric discontinuity between the aqueous solution and the substrate. To this end, we vary the relevant system characteristics, in particular the substrate dielectric constant $\varepsilon_{\rm s}$ under different salt conditions. We employ coarse-grained molecular dynamics simulations with rodlike PEs in salt solutions with explicit ions and implicit water solvent with dielectric constant $\varepsilon_{\rm w} = 80$. As expected, at low salt concentrations, PEs are repelled from the substrates with $\varepsilon_{\rm s} < \varepsilon_{\rm w}$ but are attracted to substrates with a high dielectric constant due to image charges. This attraction considerably weakens for high salt and multivalent counterions due to enhanced screening. Further, for monovalent salt, screening enhances adsorption for weakly charged PEs, but weakens it for strongly charged ones. Multivalent counterions, on the other hand, have little effect on weakly charged PEs, but prevent adsorption of highly charged PEs, even at low salt concentrations. We also find that correlation-induced charge inversion of a PE is enhanced close to the low dielectric constant substrates, but suppressed when the dielectric constant is high. To explore the possibility of a PE monolayer formation, we examine the interaction of a pair of like-charged PEs aligned parallel to a high dielectric constant substrate with $\varepsilon_{\rm s} = 8000$. Our main conclusion is that monolayer formation is possible only for weakly charged PEs at high salt concentrations of both monovalent and multivalent counterions. Finally, we also consider the energetics of a PE approaching the substrate perpendicular to it, in analogy to polymer translocation.

cond-mat.soft↗

arXiv2023

A Coarse-grained Model for Aqueous Two-phase Systems: Application to Ferrofluids

Aqueous two-phase systems (ATPSs), that is, phase-separating solutions of water soluble but mutually immiscible molecular species, offer fascinating prospects for selective partitioning, purification, and extraction. Here, we formulate a general Brownian dynamics based coarse-grained simulation model for a polymeric ATPS comprising two water soluble but mutually immiscible polymer species. A third solute species, representing, e.g., nanoparticles (NPs), additional macromolecular species, or impurities can readily be incorporated into the model. We demonstrate that the model captures satisfactorily the phase separation, partitioning, and interfacial properties of a model ATPS composed of a polymer mixture of dextran and polyethylene glycol (PEG) in which magnetic NPs selectively partition into one of the two polymeric phases. The NP partitioning is characterized both via the computational model and experimentally under different conditions. The simulation model captures the trends observed in the experiments and quantitatively links the partitioning behavior to the component species interactions. Finally, the response of the simulation model to external magnetic field, with the magnetic NPs as the additional partitioned component, shows that the ATPS interface fluctuations can be controlled by the magnetic field at length scales much smaller than those probed experimentally to date.

cond-mat.soft↗

arXiv2023

Non-monotonic electrophoretic mobility of rod-like polyelectrolytes by multivalent coions in added salt

It is well established that when multivalent counterions or salts are added to a solution of highly-charged polyelectrolytes (PEs), correlation effects can cause charge inversion of the PE, leading to electrophoretic mobility (EM) reversal. In this work, we use coarse-grained molecular dynamics simulations to unravel the less understood effect of coion valency on EM reversal for rigid DNA-like PEs. We find that EM reversal induced by multivalent counterions is suppressed with increasing coion valency in the salt added and eventually vanishes. Further, we find that EM is enhanced at fixed low salt concentrations for salts with monovalent counterions when multivalent coions with increasing valency are introduced. However, increasing the salt concentration causes a crossover that leads to EM reversal which is enhanced by increasing coion valency at high salt concentration. Remarkably, this multivalent coion-induced EM reversal persists even for low values of PE linear charge densities where multivalent counterions alone cannot induce EM reversal. These results facilitate tuning PE-PE interactions and self-assembly with both coion and counterion valencies.

cond-mat.soft↗

arXiv2022

Theoretical and computational analysis of the electrophoretic polymer mobility inversion induced by charge correlations

Electrophoretic (EP) mobility reversal is commonly observed for strongly charged macromolecules in multivalent salt solutions. This curious effect takes place, e.g., when a charged polymer, such as DNA, adsorbs excess counterions so that the counterion-dressed surface charge reverses its sign, leading to the inversion of the polymer drift driven by an external electric field. In order to characterize this seemingly counterintuitive phenomenon that cannot be captured by electrostatic mean-field theories, we adapt here a previously developed strong-coupling-dressed Poisson-Boltzmann approach to the cylindrical geometry of the polyelectrolyte-salt system. Within the framework of this formalism, we derive an analytical polymer mobility formula dressed by charge correlations. In qualitative agreement with polymer transport experiments, this mobility formula predicts that the increment of the monovalent salt, the decrease of the multivalent counterion valency, and the increase of the dielectric permittivity of the background solvent, suppress charge correlations and increase the multivalent bulk counterion concentration required for EP mobility reversal. These results are corroborated by coarse-grained molecular dynamics simulations showing how multivalent counterions induce mobility inversion at dilute concentrations and suppress the inversion effect at large concentrations. This re-entrant behavior, previously observed in the aggregation of like-charged polymer solutions, calls for verification by polymer transport experiments.

cond-mat.soft↗

arXiv2022

Interactions between polyelectrolytes mediated by ordering and orientation of multivalent non-spherical ions in salt solutions

Multivalent ions in solutions with polyelectrolytes (PE) induce electrostatic correlations that can drastically change ion distributions around the PEs and their mutual interactions. Using coarse-grained molecular dynamics simulations, we show how in addition to valency, ion shape and concentration can be harnessed as tools to control like-charged PE-PE interactions. We demonstrate a correlation between the orientational ordering of aspherical ions and how they mediate the effective PE-PE attraction induced by multivalency. The interaction type, strength, and range can thus be externally controlled in ionic solutions. Our results can be used as generic guidelines to tune the self-assembly of like-charged polyelectrolytes by variation of the characteristics of the ions.

cond-mat.soft↗

arXiv2022

Interaction between two polyelectrolytes in monovalent aqueous salt solutions

We use the recently developed soft-potential-enhanced Poisson-Boltzmann (SPB) theory to study the interaction between two parallel polyelectrolytes (PEs) in monovalent ionic solutions in the weak-coupling regime. The SPB theory is fitted to ion distributions from coarse-grained molecular dynamics (MD) simulations and benchmarked against all-atom MD modelling for poly(diallyldimethylammonium) (PDADMA). We show that the SPB theory is able to accurately capture the interactions between two PEs at distances beyond the PE radius. For PDADMA positional correlations between the charged groups lead to locally asymmetric PE charge and ion distributions. This gives rise to small deviations from the SPB prediction that appear as short-range oscillations in the potential of mean force. Our results suggest that the SPB theory can be an efficient way to model interactions in chemically specific complex PE systems.

cond-mat.soft↗

arXiv2022

Modified Poisson-Boltzmann theory for polyelectrolytes in monovalent salt solutions with finite-size ions

We present a soft-potential-enhanced Poisson-Boltzmann (SPB) theory to efficiently capture ion distributions and electrostatic potential around rodlike charged macromolecules. The SPB model is calibrated with a coarse-grained particle-based model for polyelectrolytes (PEs) in monovalent salt solutions as well as compared to a full atomistic molecular dynamics simulations with explicit solvent. We demonstrate that our modification enables the SPB theory to accurately predict monovalent ion distributions around a rodlike PE in a wide range of ion and charge distribution conditions in the weak-coupling regime. These include excess salt concentrations up to 1 M, and ion sizes ranging from small ions, such as Na or Cl, to softer and larger ions with size comparable to the PE diameter. The work provides a simple way to implement an enhancement that effectively captures the influence of ion size and species into the PB theory in the context of PEs in aqueous salt solutions.

cond-mat.soft↗

arXiv2021

Self-assembly of binary solutions to complex structures

Self-assembly in natural and synthetic molecular systems can create complex aggregates or materials whose properties and functionality rises from their internal structure and molecular arrangement. The key microscopic features that control such assemblies remain poorly understood, nevertheless. Using classical density functional theory we demonstrate how the intrinsic length scales and their interplay in terms of interspecies molecular interactions can be used to tune soft matter self-assembly. We apply our strategy to two different soft binary mixtures to create guidelines for tuning intermolecular interactions that lead to transitions from fully miscible, liquid-like uniform state to formation of simple and core-shell aggregates, and mixed aggregate structures. Furthermore, we demonstrate how the interspecies interactions and system composition can be used to control concentration gradients of component species within these assemblies. The insight generated by this work contributes towards understanding and controlling soft multi-component self-assembly systems. Additionally, our results aid in understanding complex biological assemblies and their function and provide tools to engineer molecular interactions in order to control polymeric and protein-based materials, pharmaceutical formulations, and nanoparticle assemblies.

cond-mat.soft↗

arXiv2021

Self-assembly in soft matter with multiple length scales

Spontaneous self-assembly in molecular systems is a fundamental route to both biological and engineered soft matter. Simple micellisation, emulsion formation, and polymer mixing principles are well understood. However, the principles behind emergence of structures with competing length scales in soft matter systems remain an open question. Examples include the droplet-inside-droplet assembly in many biomacromolecular systems undergoing liquid-liquid phase separation, analogous multiple emulsion formation in oil-surfactant-water formulations, and polymer core-shell particles with internal structure. We develop here a microscopic theoretical model based on effective interactions between the constituents of a soft matter system to explain self-organization both at single and multiple length scales. The model identifies how spatial ordering at multiple length scales emerges due to competing interactions between the system components, e.g. molecules of different sizes and different chemical properties. As an example of single and multiple-length-scale assembly, we map out a generic phase diagram for a solution with two solute species differing in their mutual and solvent interactions. By performing molecular simulations on a block-copolymer system, we further demonstrate how the phase diagram can be connected to a molecular system that has a transition from regular single-core polymer particles to multi-core aggregates that exhibit multiple structural length scales. The findings provide guidelines to understanding the length scales rising spontaneously in biological self-assembly, but also open new venues to the development and engineering of biomolecular and polymeric functional materials.

cond-mat.soft↗

arXiv2017

Flow induced crystallization of penetrable particles

For a system of Brownian particles interacting via a soft exponential potential we investigate the interaction between equilibrium crystallization and spatially varying shear flow. For thermodynamic state points within the liquid part of the phase diagram, but close to the crystallization phase boundary, we observe that imposing a Poiseuille flow can induce nonequilibrium crystalline ordering in regions of low shear gradient. The physical mechanism responsible for this phenomenon is shear induced particle migration, which causes particles to drift preferentially towards the center of the flow channel, thus increasing the local density in the channel center. The method employed is classical dynamical density functional theory.

cond-mat.soft↗

arXiv2017

Dynamical density functional theory analysis of the laning instability in sheared soft matter

Using dynamical density functional theory (DDFT) methods we investigate the laning instability of a sheared colloidal suspension. The nonequilibrium ordering at the laning transition is driven by non-affine particle motion arising from interparticle interactions. Starting from a DDFT which incorporates the non-affine motion, we perform a linear stability analysis that enables identification of the regions of parameter space where lanes form. We illustrate our general approach by applying it to a simple one-component fluid of soft penetrable particles.

cond-mat.soft↗

arXiv2017

Mean first passage time of active Brownian particle in one dimension

We investigate the mean first passage time of an active Brownian particle in one dimension using numerical simulations. The activity in one dimension is modeled as a two state model; the particle moves with a constant propulsion strength but its orientation switches from one state to other as in a random telegraphic process. We study the influence of a finite resetting rate $r$ on the mean first passage time to a fixed target of a single free Active Brownian Particle and map this result using an effective diffusion process. As in the case of a passive Brownian particle, we can find an optimal resetting rate $r^*$ for an active Brownian particle for which the target is found with the minimum average time. In the case of the presence of an external potential, we find good agreement between the theory and numerical simulations using an effective potential approach.

cond-mat.soft↗

arXiv2017

Effective equilibrium states in the colored-noise model for active matter I. Pairwise forces in the Fox and unified colored noise approximations

The equations of motion of active systems can be modeled in terms of Ornstein-Uhlenbeck processes (OUPs) with appropriate correlators. For further theoretical studies, these should be approximated to yield a Markovian picture for the dynamics and a simplified steady-state condition. We perform a comparative study of the Unified Colored Noise Approximation (UCNA) and the approximation scheme by Fox recently employed within this context. We review the approximations necessary to define effective interaction potentials in the low-density limit and study the conditions for which these represent the behavior observed in two-body simulations for the OUPs model and Active Brownian particles. The demonstrated limitations of the theory for potentials with a negative slope or curvature can be qualitatively corrected by a new empirical modification. In general, we find that in the presence of translational white noise the Fox approach is more accurate. Finally, we examine an alternative way to define a force-balance condition in the limit of small activity.

cond-mat.soft↗