arXiv subjects

Alan Savan

Publications and source records attributed to Alan Savan.

8 recordsLinked to original sources

arXiv2026

A thermally grown SiO2 diffusion barrier enabling high-temperature investigation of Ag-Au-Pd-Pt thin films

Combinatorial processing platforms (CPPs), integrating Si microtip arrays with combinatorial thin film synthesis and atom probe tomography (APT), enable near-atomic-scale characterization of compositionally complex solid solutions (CCSSs) under diverse processing and reaction conditions, including oxidation, thermal phase stability and electrocatalytic reactions. Their application at elevated temperatures, however, can be limited when CCSS constituents such as Pd and Pt react with the Si support to form silicides. Although thermally grown SiO2 has proven effective as a diffusion barrier between pure Pt and Si, its performance for multicomponent CCSS thin films is unclear. Here, using Ag-Au-Pd-Pt as a model system, we compare a 25 nm thermally grown SiO2 barrier with native Si oxide during annealing using APT and transmission electron microscopy. Native Si oxide prevents detectable interfacial reactions up to 300{\deg}C, but at 400{\deg}C Pd and Pt react with Si, causing silicide formation and substantial redistribution of the film constituents. At 600{\deg}C, extensive substrate reactions disrupt the CCSS film and produce a pronounced needle-shaped silicide morphology. In contrast, thermally grown SiO2 suppresses CCSS thin film-substrate reactions up to 600{\deg}C and retains the CCSS composition. The thermally grown SiO2 thus extends the applicable temperature range of Si-based CPPs to at least 600{\deg}C for near-atomic-scale characterization of CCSS thin films.

cond-mat.mtrl-sci↗

arXiv2026

A hidden low-temperature transformation pathway in compositionally complex materials

Most compositionally complex materials (CCMs, frequently referred to as high entropy alloys) are metastable and their attractive properties often belong to kinetically trapped states. However, pathways towards lower-free-energy phase states governing long-term stability, can remain hidden because diffusion-controlled atomic redistribution is too slow to be revealed at experimentally accessible timescales. This blind spot is acute in CCM design: enormous compositional spaces are screened for performance, yet the low-temperature kinetics and the associated transformation pathways determining whether that performance persists are rarely considered in material selection. Here we use defect-rich nanoscale volumes coupled with atom-probe tomography to access and reconstruct the hidden phase-evolution pathway in a metastable Ag24Au20Pd50Pt6 electrocatalyst, without relying on elevated temperatures to accelerate the transformation. By varying microstructural starting state, annealing temperature and time, we reveal precipitation of a Pt-rich phase within the fcc matrix, its coarsening and re-homogenization. The Pt-rich phase recurs after homogenization with delayed kinetic accessibility, while prolonged annealing extends the pathway to 300{\deg}C. Atomistic simulations independently predict the same Pt-rich phase selection. The transformation is accompanied by a 3.7-fold loss of catalytic activity for hydrogen evolution. These results establish hidden phase-evolution pathways as a materials-design variable: resolving them can guide the selection of metastable CCMs not only for their as-synthesized properties, but also for the phase states and associated functionalities they may access over time.

cond-mat.mtrl-sci↗

arXiv2026

Synthetic control over marcasite-pyrite polymorph formation in the Fe1-xCoxSe2 series

Transition-metal dichalcogenides of the pyrite-marcasite family are model systems of crystal chemistry. A few of these show polymorphism. The theoretical ground state of CoSe2 is marcasite, but the material is typically synthesized in the pyrite structure. Polymorphism has been observed in nanoparticles and synthetic control of the polymorphs of CoSe2 has not been achieved. We have synthesized material libraries of the Fe1-xCoxSe2 series by combining combinatorial deposition and ex-situ selenization. The approach allows to efficiently explore substitution ranges and crystal structures that form for different synthesis conditions. We find that higher levels of Co content x within the marcasite structure are possible when synthesizing at low temperatures. At a synthesis temperature of only 250{\deg} C, we have successfully synthesized marcasite CoSe2 as the majority phase. Density functional theory simulations reveal that the two isomorphs of CoSe2 are extremely close in energy and that the orthorhombic phase is the energetic ground state. Our experimental and theoretical data show that the marcasite structure is the equilibrium phase of Fe1-xCoxSe2 in the entire composition range.

cond-mat.mtrl-sci↗

arXiv2021

Combinatorial materials discovery strategy for high entropy alloy electrocatalysts using deposition source permutations

High entropy alloys offer a huge search space for new electrocatalysts. Searching for a global property maximum in one quinary system could require, depending on compositional resolution, the synthesis of up to 10E6 samples which is impossible using conventional approaches. Co-sputtered materials libraries address this challenge by synthesis of controlled composition gradients of each element. However, even such a materials library covers less than 1% of the composition space of a quinary system. We present a new strategy using deposition source permutations optimized for highest improvement of the covered new compositions. Using this approach, the composition space can be sampled in different subsections allowing identification of the contribution of individual elements and their combinations on electrochemical activity. Unsupervised machine learning reveals that electrochemical activity is governed by the complex interplay of chemical and structural factors. Out of 2394 measured compositions, a new highly active composition for the oxygen reduction reaction around Ru17Rh5Pd19Ir29Pt30 was identified.

cond-mat.mtrl-sci↗

arXiv2021

Bayesian Optimization of High-Entropy Alloy Compositions for Electrocatalytic Oxygen Reduction

Active, selective and stable catalysts are imperative for sustainable energy conversion, and engineering materials with such properties are highly desired. High-entropy alloys (HEAs) offer a vast compositional space for tuning such properties. Too vast, however, to traverse without the proper tools. Here, we report the use of Bayesian optimization on a model based on density functional theory (DFT) to predict the most active compositions for the electrochemical oxygen reduction reaction (ORR) with the least possible number of sampled compositions for the two HEAs Ag-Ir-Pd-Pt-Ru and Ir-Pd-Pt-Rh-Ru. The discovered optima are then scrutinized with DFT and subjected to experimental validation where optimal catalytic activities are verified for Ag-Pd, Ir-Pt, and Pd-Ru binary systems. This study offers insight into the number of experiments needed for exploring the vast compositional space of multimetallic alloys which has been determined to be on the order of 50 for ORR on these HEAs.

physics.chem-ph↗

arXiv2021

Nanocrystalline equiatomic CoCrFeNi alloy thin films: Are they single phase fcc?

The bulk quaternary equiatomic CoCrFeNi alloy is studied extensively in literature. Under experimental conditions, it shows a single-phase fcc structure and its physical and mechanical properties are similar to those of the quinary equiatomic CoCrFeMnNi alloy. Many studies in literature have focused on the mechanical properties of bulk nanocrystalline high entropy alloys or compositionally complex alloys, and their microstructure evolution upon annealing. The thin film processing route offers an excellent alternative to form nanocrystalline alloys. Due to the high nucleation rate and high density of defects in thin films synthesized by sputtering, the kinetics of microstructure evolution is often accelerated compared to those taking place in the bulk. Here, thin films are used to study the phase evolution in nanocrystalline CoCrFeNi deposited on Si/SiO 2 and c-sapphire substrates by magnetron cosputtering from elemental sources. The phases and microstructure of the films are discussed in comparison to the bulk alloy. The main conclusion is that second phases can form even at room temperature provided there are sufficient nucleation sites.

cond-mat.mtrl-sci↗

arXiv2020

Complex solid solution electrocatalyst discovery by prediction and high-throughput experimentation

Efficient discovery of electrocatalysts for electrochemical energy conversion reactions is of utmost importance to combat climate change. With the example of the oxygen reduction reaction we show that by utilising a data-driven discovery cycle, the multidimensionality challenge offered by compositionally complex solid solution (high entropy alloy) electrocatalysts can be mastered. Iteratively refined computational models predict activity trends for quinary target compositions, around which continuous composition spread thin-film libraries are synthesized. High-throughput characterisation datasets are then input for refinement of the model. The refined model correctly predicts activity maxima of the exemplary model system Ag-Ir-Pd-Pt-Ru for the oxygen reduction reaction. The method can identify optimal complex solid solutions for electrochemical reactions in an unprecedented manner.

cond-mat.mtrl-sci↗

arXiv2020

Microstructure evolution and thermal stability of equiatomic CoCrFeNi films on (0001)alpha-Al2O3

Homogeneous face-centered cubic (fcc) polycrystalline CoCrFeNi films were deposited at room temperature on (0001)alpha-Al2O3 (c-sapphire). Phase and morphological stability of 200 to 670 nm thick films were investigated between 973 K and 1423 K. The fcc-phase persists while the original <111> texture of 30-100 nm wide columnar grains evolves into ~10 or ~1000 micron wide grains. Only the grains having specific orientation relationships to the sapphire grow; as in the case of pure fcc metal (M) films 4 orientation relationships (OR) are found: OR1 (M(111)[1-10]//alpha-Al2O3 (0001)[1-100]) and OR2 (M(111)[1-10]//alpha-Al2O3 (0001)[11-20]) and their twin-related variants (OR1t and OR2t). Below 1000 K, the film microstructure stabilizes into 10 micron wide OR1 and OR1t twin grains independent of film thickness. Above 1000 K, the OR2 and OR2t grains expand to sizes exceeding more than a 1000 times the film thickness. Upon annealing, the films either retain their integrity or break-up depending on the competing kinetics of grain growth and grain boundary grooving. Triple junctions of the grain boundaries, the major actors in film stability, were tracked. Thinner films and higher temperatures favor film break-up by dewetting from the holes grooved at the triple junctions down to the substrate. The grain boundaries of the OR2 and OR2t grains migrate fast enough to overcome the nucleation of holes from which break-up could initiate. The growth of the OR2 and OR2t grains in this complex alloy is faster than in pure fcc metals at equivalent homologous annealing temperatures.

cond-mat.mtrl-sci↗