arXiv subjects

Akira Ono

Publications and source records attributed to Akira Ono.

At least 19 recordsLinked to original sources

arXiv2026

Constraining the nuclear symmetry energy with electric dipole polarizability and neutron skin characteristics in \texorpdfstring{$^{208}\mathrm{Pb}$}{208Pb} within antisymmetrized molecular dynamics

The electric dipole polarizability $α_D$ and the neutron-skin thickness $ΔR_{np}$ of $^{208}\mathrm{Pb}$ are two powerful and clean probes for constraining the symmetry energy at subsaturation densities. Within the framework of the antisymmetrized molecular dynamics (AMD) model, the width of the strength function and its dynamical origins are understood, and the $α_D$ and $ΔR_{np}$ data favor effective interaction parameter sets with $S_0\approx32$-34 MeV and $L=64$-87 MeV. In addition, our calculations show that the sensitive densities of $α_D$ and $ΔR_{np}$ range from 0.2$ρ_0$ to 0.57$ρ_0$, and the corresponding values of the symmetry energy at the lower and upper ends of this sensitive density region are $S(0.2ρ_0)=10.18\pm 1.10$ MeV and $S(0.57ρ_0)=22.31\pm 1.32$ MeV.

nucl-th↗

arXiv2026

Revisiting neutron-skin thickness and dipole polarizability constraints on the symmetry energy in Antisymmetrized Molecular Dynamics

The neutron-skin thickness and electric dipole polarizability are among the most sensitive probes of the symmetry energy at subsaturation densities. Motivated by the tension raised by recent analyses of PREX-II and CREX data within density-functional-based approaches, we perform a unified study of static and dynamical isovector observables within the antisymmetrized molecular dynamics (AMD) framework. Using thirty interaction parameter sets that span different values of the symmetry-energy coefficient $S_0$, slope parameter $L$, and neutron-proton effective-mass splitting $Δm_{np}^*$, we systematically analyze the neutron-skin thicknesses of nuclei from $^{40}$Ca to $^{238}$U together with the electric dipole polarizability $α_D$ of $^{208}$Pb. A combined $χ^2$ analysis of neutron-skin thicknesses and the electric dipole polarizability yields preferred values of $L$ that increase with $S_0$, reflecting the joint constraint from the static and dynamical observables. Furthermore, we identify the density region mainly probed by these observables as 0.019 $\le ρ/ρ_0\le $0.60, where the relative narrowing strength function varies by less than 10% compared to its maximum narrowing strength. The maximum reduction of the uncertainty of $S(ρ)$ occurs at 0.28 $ρ_0$, where the symmetry energy within 1$σ_{post}$ uncertainty is constrained to be $S(0.28ρ_0) = 13.84\pm 1.31$ MeV. These results demonstrate that a unified AMD analysis of neutron-skin systematics and dipole polarizability provides a complementary constraint on the symmetry energy below saturation density.

nucl-th↗

arXiv2024

Activation of momentum fluctuations in wave packet molecular dynamics: Impacts on momentum distributions of projectilelike fragments

Molecular dynamics approaches use wave packets as nucleon wave functions to simulate the time evolution of nuclear reactions. It is crucial to activate the momentum fluctuation inherent in each wave packet so that it properly affects the time evolution. In the antisymmetrized molecular dynamics (AMD) model, this has traditionally been done by splitting the wave packets, i.e., by introducing a random fluctuation to the wave packet center of each particle. The present work proposes an improved approach to activate the fluctuation in both the one-body mean-field propagation and the two-nucleon collision processes, consistently based on the gradual or sudden change of the degree of isolation, which is derived from the fragment number function used for the zero-point energy subtraction. This new method is applied to the 12C + 12C and 12C + p reactions at about 100 MeV/nucleon, focusing on the momentum distribution of the 11B fragments produced by one-proton removal from the 12C projectile. The results show that, with the momentum fluctuation suitably activated, the method correctly accounts for the recoil from the removed nucleon to the residue and the 11B momentum distribution is significantly improved, while without activating the fluctuation the distribution is too narrow compared to the experimental data. Furthermore, the AMD results indicate that the momentum distribution consists of two components; one is the high $P_z$ component with a small shift from the beam velocity, resulting from the simple removal of a proton after an energetic collision with a target particle; the other is the low $P_z$ component with a larger peak shift resulting from the decay of an excited 12C nucleus in a longer time scale. The activation of momentum fluctuation mainly affects the high $P_z$ component to broaden it. The role of cluster correlations in this problem is also investigated.

nucl-th↗

arXiv2024

Isospin diffusion from $^{40,48}$Ca$+^{40,48}$Ca experimental data at Fermi energies: Direct comparisons with transport model calculations

This article presents an investigation of isospin equilibration in cross-bombarding $^{40,48}$Ca$+^{40,48}$Ca reactions at 35 MeV/nucleon, by comparing experimental data with filtered transport model calculations. Isospin diffusion is studied using the evolution of the isospin transport ratio with centrality. The asymmetry parameter $δ=(N-Z)/A$ of the quasiprojectile (QP) residue is used as isospin-sensitive observable, while a recent method for impact parameter reconstruction is used for centrality sorting. A benchmark of global observables is proposed to assess the relevance of the antisymmetrized molecular dynamics (AMD) model, coupled to GEMINI++, in the study of dissipative collisions. Our results demonstrate the importance of considering cluster formation to reproduce observables used for isospin transport and centrality studies. Within the AMD model, we prove the applicability of the impact parameter reconstruction method, enabling a direct comparison to the experimental data for the investigation of isospin diffusion. For both, we evidence a tendency to isospin equilibration with an impact parameter decreasing from 9 to 3 fm, while the full equilibration is not reached. A weak sensitivity to the stiffness of the equation of state employed in the model is also observed, with a better reproduction of the experimental trend for the neutron-rich reactions.

nucl-ex↗

arXiv2024

Comparing pion production in transport simulations of heavy-ion collisions at $270A$ MeV under controlled conditions

Within the TMEP, we present a detailed study of the performance of different transport models in Sn+Sn collisions at $270A$ MeV, and put particular emphasis on the production of pions and $Δ$ resonances, which have been used as probes of the nuclear symmetry energy. We prescribe a common and rather simple physics model, and follow in detail the results of 4 BUU models and 6 QMD models. The nucleonic evolution of the collision and the nucleonic observables in these codes do not completely converge, but the differences among the codes can be understood as being due to several reasons: the basic differences between BUU and QMD models in the representation of the phase-space distributions, computational differences in the mean-field evaluation, and differences in the adopted strategies for the Pauli blocking in the collision integrals. For pionic observables, we find that a higher maximum density leads to an enhanced pion yield and a reduced $π^-/π^+$ yield ratio, while a more effective Pauli blocking generally leads to a slightly suppressed pion yield and an enhanced $π^-/π^+$ yield ratio. We specifically investigate the effect of the Coulomb force, and find that it increases the total $π^-/π^+$ yield ratio but reduces the ratio at high pion energies, although differences in its implementations do not have a dominating role in the differences among the codes. Taking into account only the results of codes that strictly follow the homework specifications, we find a convergence of the codes in the final charged pion yield ratio to a $1σ$ deviation of about $5\%$. However, the uncertainty is expected to be reduced to about $1.6\%$ if the same or similar strategies and ingredients, i.e., an improved Pauli blocking and calculation of the non-linear term in the mean-field potential, are similarly used in all codes.

nucl-th↗

arXiv2023

Collision integral with momentum-dependent potentials and its impact on pion production in heavy-ion collisions

The momentum dependence of the nucleon mean-field potential in a wide momentum range can be an important factor to determine the $Δ$ resonance and pion production in intermediate-energy heavy-ion collisions. In particular, in neutron-rich systems such as ${}^{132}\mathrm{Sn}+{}^{124}\mathrm{Sn}$ collisions, we need to carefully treat the momentum dependence because the neutron and proton potentials can have different momentum dependence, as characterized at low momenta by effective masses. In the present work, we rigorously calculate the collision terms of $NN \leftrightarrow N Δ$ and $Δ\leftrightarrow N π$ processes with the precise conservation of energy and momentum under the presence of momentum-dependent potentials for the initial and final particles of the process. The potentials affect not only the threshold condition for the process but also the cross section in general as a function of the momenta of the initial particles, which is treated in a natural way in the present work. Calculations are performed by combining the nucleon dynamics obtained by the antisymmetrized molecular dynamics (AMD) model with a newly developed transport code which we call sJAM. The calculated results for central ${}^{132}\mathrm{Sn}+{}^{124}\mathrm{Sn}$ collisions at 270 MeV/nucleon clearly show that the momentum dependence of the neutron and proton potentials has a significant impact on the $NN \to N Δ$ process, and this information is strongly reflected in the charged pion ratio ($π^-/π^+$). We also investigate the effects of the high-density symmetry energy and the isovector part of the potential of $Δ$ resonances on pion production, which we find are relatively small compared to the effect of the momentum dependence of the neutron and proton potentials.

nucl-th↗

arXiv2022

Transport Model Comparison Studies of Intermediate-Energy Heavy-Ion Collisions

Transport models are the main method to obtain physics information from low to relativistic-energy heavy-ion collisions. The Transport Model Evaluation Project (TMEP) has been pursued to test the robustness of transport model predictions in reaching consistent conclusions from the same type of physical model. Calculations under controlled conditions of physical input and set-up were performed with various participating codes. These included both calculations of nuclear matter in a box with periodic boundary conditions, and more realistic calculations of heavy-ion collisions. In this intermediate review, we summarize and discuss the present status of the project. We also provide condensed descriptions of the 26 participating codes, which contributed to some part of the project. These include the major codes in use today. We review the main results of the studies completed so far. They show, that in box calculations the differences between the codes can be well understood and a convergence of the results can be reached. These studies also highlight the systematic differences between the two families of transport codes, known as BUU and QMD type codes. However, when the codes were compared in full heavy-ion collisions using different physical models, as recently for pion production, they still yielded substantially different results. This calls for further comparisons of heavy-ion collisions with controlled models and of box comparisons of important ingredients, like momentum-dependent fields, which are currently underway. We often indicate improved strategies in performing transport simulations and thus provide guidance to code developers. Results of transport simulations of heavy-ion collisions from a given code will have more significance if the code can be validated against benchmark calculations such as the ones summarized in this review.

nucl-th↗

arXiv2022

Role of Tensor Interaction as Salvation of Cluster Structure in $^{44}$Ti

Background: The $^{44}$Ti nucleus has been known to have a $^{40}$Ca+$α$ cluster structure, and inversion doublet structure has been observed; however, $α$ cluster structure tends to be washed out when the breaking of the $α$ cluster is allowed due to the spin-orbit interaction. Nevertheless, $α$ clustering in medium-heavy nuclei is quite a hot subject recently. Purpose: The tensor interaction has been known to play an essential role in the strong binding of the $^4$He nucleus, which induces the two-particle-two-hole (2p2h) excitation. Since this excitation is blocked when another nucleus approaches, it is worthwhile to show whether the tensor effect works to keep the distance between $^4$He and $^{40}$Ca and becomes the salvation of the clustering in $^{44}$Ti. Methods: The spin-orbit effect is included in the cluster model by using the antisymmetrized quasi cluster model (AQCM) developed by the authors. We have also developed an improved version of the simplified method to include the tensor contribution ($i$SMT), which allows us to estimate the tensor effect within the cluster model. The competition of these two is investigated in the medium-heavy mass region for the first time. Results: According to AQCM, the spin-orbit interaction completely breaks the $α$ cluster and restores the symmetry of $jj$-coupling shell model when the $α$ cluster approaches the $^{40}$Ca core. On the other hand, $i$SMT gives a large distance between $α$ and $^{40}$Ca due to the tensor effect. Conclusions: In $^{44}$Ti, because of the strong spin-orbit and tensor contributions, two completely different configurations ($jj$-coupling shell model and cluster states) almost degenerate, and their mixing becomes important.

nucl-th↗

arXiv2022

Reply to Comment on "Phase-space consideration on barrier transmission in a time-dependent variational approach with superposed wave packets"

In the paper by Hasegawa, Hagino and Tanimura (HHT) [Phys. Lett. B 808 (2020) 135693, arXiv:2006.06944], they concluded that quantum tunneling was simulated by a time-dependent generator coordinate method (TDGCM). In contrast, difficulties of TDGCM in describing quantum tunneling were pointed out by Ono in the paper [Phys. Lett. B 826 (2022) 136931, arXiv:2201.02966]. Recently, HHT submitted a comment [arXiv:2202.00513v1], by which they appear to give some counterarguments to Ono's paper. Here I examine their arguments, reviewing the main points of Ono's paper. The confusion in HHT's arguments may be mostly resolved by recognizing how the wave packets interfere with each other when they are coherently superposed.

nucl-th↗

arXiv2022

Phase-space consideration on barrier transmission in a time-dependent variational approach with superposed wave packets

A known limitation of time-dependent mean-field approaches is a lack of quantum tunneling for collective motions such as in sub-barrier fusion reactions. As a first step toward a solution, a time-dependent model is considered using a superposition of Gaussian wave packets, to describe the relative motion between two colliding nuclei, which may be simplified to a problem for one particle in one dimension. In this article, how the model describes the potential-barrier transmission is investigated by paying attention to the time evolution of the phase space distribution, which in particular reveals that the behavior of the free propagation of the incoming state is not trivial, depending on the number of superposed wave packets. Passage over the barrier can occur due to the high-momentum components in the incoming state corresponding to energies above the barrier height, which is, however, of classical nature and needs to be distinguished from the true quantum tunneling. Although a transmitted wave packet in some case may end up with an energy lower than the barrier, a difficulty is noticed in guaranteeing the energy conservation when the energies of different exit channels, e.g. of transmission and reflection, are individually measured. To overcome these issues for a description of quantum tunneling is still a challenging problem. This article mainly treats the same system with the same model as in the paper Phys. Lett. B 808 (2020) 135693, arXiv:2006.06944v1 by N. Hasegawa, K. Hagino and Y. Tanimura. However, the conclusion of the present work disagrees with their quick conclusion that quantum tunneling was simulated by the model. Comments are made on this.

nucl-th↗

arXiv2021

Applying machine learning to determine impact parameter in nuclear physics experiments

Machine Learning (ML) algorithms have been demonstrated to be capable of predicting impact parameter in heavy-ion collisions from transport model simulation events with perfect detector response. We extend the scope of ML application to experimental data by incorporating realistic detector response of the S$π$RIT Time Projection Chamber into the heavy-ion simulation events generated from the UrQMD model to resemble experimental data. At 3 fm, the predicted impact parameter is 2.8 fm if simulation events with perfect detector is used for training and testing; 2.4 fm if detector response is included in the training and testing, and 5.8 fm if ML algorithms trained with perfect detector is applied to testing data that has included detector response. The last result is not acceptable illustrating the importance of including the detector response in developing the ML training algorithm. We also test the model dependence by applying the algorithms trained on UrQMD model to simulated events from four different transport models as well as using different input parameters on UrQMD model. Using data from Sn+Sn collisions at E/A=270 MeV, the ML determined impact parameters agree well with the experimentally determined impact parameter using multiplicities, except in the very central and very peripheral regions. ML selects central collision events better and allows impact parameters determination beyond the sharp cutoff limit imposed by experimental methods.

physics.ins-det↗

arXiv2021

Comparison of Heavy-Ion Transport Simulations: Mean-field Dynamics in a Box

Within the transport model evaluation project (TMEP) of simulations for heavy-ion collisions, the mean-field response is examined here. Specifically, zero-sound propagation is considered for neutron-proton symmetric matter enclosed in a periodic box, at zero temperature and around normal density. The results of several transport codes belonging to two families (BUU-like and QMD-like) are compared among each other and to exact calculations. For BUU-like codes, employing the test particle method, the results depend on the combination of the number of test particles and the spread of the profile functions that weight integration over space. These parameters can be properly adapted to give a good reproduction of the analytical zero-sound features. QMD-like codes, using molecular dynamics methods, are characterized by large damping effects, attributable to the fluctuations inherent in their phase-space representation. Moreover, for a given nuclear effective interaction, they generally lead to slower density oscillations, as compared to BUU-like codes. The latter problem is mitigated in the more recent lattice formulation of some of the QMD codes. The significance of these results for the description of real heavy-ion collisions is discussed.

nucl-th↗

arXiv2020

Symmetry energy investigation with pion production from Sn+Sn systems

In the past two decades, pions created in the high density regions of heavy ion collisions have been predicted to be sensitive at high densities to the symmetry energy term in the nuclear equation of state, a property that is key to our understanding of neutron stars. In a new experiment designed to study the symmetry energy, the multiplicities of negatively and positively charged pions have been measured with high accuracy for central $^{132}$Sn+$^{124}$Sn, $^{112}$Sn+$^{124}$Sn, and $^{108}$Sn+$^{112}$Sn collisions at $E/A=270~\mathrm{MeV}$ with the S$π$RIT Time Projection Chamber. While the uncertainties of individual pion multiplicities are measured to 4\%, those of the charged pion multiplicity ratios are measured to 2\%. We compare these data to predictions from seven major transport models. The calculations reproduce qualitatively the dependence of the multiplicities and their ratios on the total neutron to proton number in the colliding systems. However, the predictions of the transport models from different codes differ too much to allow extraction of reliable constraints on the symmetry energy from the data. This finding may explain previous contradictory conclusions on symmetry energy constraints obtained from pion data in Au+Au system. These new results call for better understanding of the differences among transport codes, and new observables that are more sensitive to the density dependence of the symmetry energy.

nucl-ex↗

arXiv2020

Effects of Pauli blocking on pion production in central collisions of neutron-rich nuclei

Pauli blocking is carefully investigated for the processes of $NN \rightarrow N Δ$ and $Δ\rightarrow N π$ in heavy-ion collisions, aiming at a more precise prediction of the $π^-/ π^+$ ratio which is an important observable to constrain the high-density symmetry energy. We use the AMD+JAM approach, which combines the antisymmetrized molecular dynamics for the time evolution of nucleons and the JAM model to treat processes for $Δ$ resonances and pions. As is known in general transport-code simulations, it is difficult to treat Pauli blocking very precisely due to unphysical fluctuations and additional smearing of the phase-space distribution function, when Pauli blocking is treated in the standard method of JAM. We propose an improved method in AMD+JAM to use the Wigner function precisely calculated in AMD as the blocking probability. Different Pauli blocking methods are compared in heavy-ion collisions of neutron-rich nuclei, ${}^{132}\mathrm{Sn}+{}^{124}\mathrm{Sn}$, at 270 MeV/nucleon. With the more accurate method, we find that Pauli blocking is stronger, in particular for the neutron in the final state in $NN \rightarrow N Δ$ and $ Δ\to Nπ$, compared to the case with a proton in the final state. Consequently, the $π^-/π^+$ ratio becomes higher when the Pauli blocking is improved, the effect of which is found to be comparable to the sensitivity to the high-density symmetry energy.

nucl-th↗

arXiv2019

Comparison of heavy-ion transport simulations: Collision integral with pions and $Δ$ resonances in a box

We compare ten transport codes for a system confined in a box, aiming at improved handling of the production of $Δ$ resonances and pions, which is indispensable for constraining high-density symmetry energy from observables such as the $π^-/π^+$ yield ratio in heavy-ion collisions. The system in a box is initialized with nucleons at saturation density and at 60 MeV temperature. The reactions $NN\leftrightarrow NΔ$ and $Δ\leftrightarrow Nπ$ are implemented, but the Pauli blocking and the mean-field potential are deactivated in the present comparison. Results are compared to those from the two reference cases of a chemically equilibrated ideal gas mixture and of the rate equation. In the results of the numbers of $Δ$ and $π$, deviations from the reference values are observed in many codes, and they depend significantly on the size of the time step. These deviations are tied to different ways in ordering the sequence of collisions and decays, that take place in the same time step. Better agreements are seen in the reaction rates and the number ratios among the isospin species of $Δ$ and $π$. These are, however, affected by the correlations, which are absent in the Boltzmann equation, but are induced by the way particle scatterings are treated in transport calculations. The uncertainty in the transport-code predictions of the $π^-/π^+$ ratio for the system initialized at n/p = 1.5, after letting the existing $Δ$ resonances decay, is found to be within a few percent, which is sufficiently small so that it does not strongly impact constraining the high-density symmetry energy from heavy-ion collisions. Most of the sources of uncertainties have been understood, and individual codes may be further improved. This investigation will be extended in the future to heavy-ion collisions to ensure the problems identified here remain under control.

nucl-th↗

arXiv2019

Dynamics of clusters and fragments in heavy-ion collisions

A review is given on the studies of formation of light clusters and heavier fragments in heavy-ion collisions at incident energies from several tens of MeV/nucleon to several hundred MeV/nucleon, focusing on dynamical aspects and on microscopic theoretical descriptions. Existing experimental data already clarify basic characteristics of expanding and fragmenting systems typically in central collisions, where cluster correlations cannot be ignored. Cluster correlations appear almost everywhere in excited low-density nuclear many-body systems and nuclear matter in statistical equilibrium where the properties of a cluster may be influenced by the medium. On the other hand, transport models to solve the time evolution have been developed based on the single-nucleon distribution function. Different types of transport models are reviewed putting emphasis both on theoretical features and practical performances in the description of fragmentation. A key concept to distinguish different models is how to consistently handle single-nucleon motions in the mean field, fluctuation or branching induced by two-nucleon collisions, and localization of nucleons to form fragments and clusters. Some transport codes have been extended to treat light clusters explicitly. Results indicate that cluster correlations can have strong impacts on global collision dynamics and correlations between light clusters should also be taken into account.

nucl-th↗

arXiv2018

Comparison of heavy-ion transport simulations: Collision integral in a box

Simulations by transport codes are indispensable to extract valuable physics information from heavy ion collisions. In order to understand the origins of discrepancies between different widely used transport codes, we compare 15 such codes under controlled conditions of a system confined to a box with periodic boundary, initialized with Fermi-Dirac distributions at saturation density and temperatures of either 0 or 5 MeV. In such calculations, one is able to check separately the different ingredients of a transport code. In this second publication of the code evaluation project, we only consider the two-body collision term, i.e. we perform cascade calculations. When the Pauli blocking is artificially suppressed, the collision rates are found to be consistent for most codes (to within $1\%$ or better) with analytical results, or completely controlled results of a basic cascade code after eliminating the correlations within the same pair of colliding particles. In calculations with active Pauli blocking, the blocking probability was found to deviate from the expected reference values. The reason is found in substantial phase-space fluctuations and smearing tied to numerical algorithms and model assumptions in the representation of phase space. This results in the reduction of the blocking probability in most transport codes, so that the simulated system gradually evolves away from the Fermi-Dirac towards a Boltzmann distribution. As a result of this investigation, we are able to make judgements about the most effective strategies in transport simulations for determining the collision probabilities and the Pauli blocking. Investigation in a similar vein of other ingredients in transport calculations, like the mean field propagation or the production of nucleon resonances and mesons, will be discussed in the future publications.

nucl-th↗

arXiv2018

Probing neutron-proton dynamics by pions

In order to investigate the nuclear symmetry energy at high density, we study the pion production in central collisions of neutron-rich nuclei ${}^{132}\mathrm{Sn}+{}^{124}\mathrm{Sn}$ at 300 MeV/nucleon using a new approach by combining the antisymmetrized molecular dynamics (AMD) and a hadronic cascade model (JAM). The dynamics of neutrons and protons is solved by AMD, and then pions and $Δ$ resonances in the reaction process are handled by JAM. We see the mechanism how the $Δ$ resonance and pions are produced reflecting the dynamics of neutrons and protons. We also investigate the impacts of cluster correlations as well as of the high-density symmetry energy on the nucleon dynamics and consequently on the pion ratio. We find that the $Δ^-/Δ^{++}$ production ratio agrees very well with the neutron-proton squared ratio $(N/Z)^2$ in the high-density and high-momentum region. We show quantitatively that $Δ$ production ratio, and therefore $(N/Z)^2$, are directly reflected in the $π^-/π^+$ ratio, with modification in the final stage of the reaction.

nucl-th↗