arXiv subjects

Ahmed Elzanaty

Publications and source records attributed to Ahmed Elzanaty.

At least 19 recordsLinked to original sources

arXiv2026

Holographic MIMO-assisted Multiuser Transmission with Electromagnetic Exposure Constraints

Holographic multiple-input multiple-output (HMIMO) has emerged as a promising technology for future wireless systems by enabling continuous electromagnetic (EM) field control over large apertures. However, user-side EM exposure has become an increasingly important concern in large-scale array systems. This paper addresses this issue by developing a multiuser uplink HMIMO model, where a physically consistent specific absorption rate (SAR) model is established to quantify the EM exposure. On this basis, a spectral efficiency (SE) maximization problem is addressed by developing a modified iterative water-filling algorithm. Simulation results demonstrate that the proposed algorithm effectively improves the system SE while satisfying the SAR constraints.

eess.SP↗

arXiv2026

Multi-Functional RIS-enabled Radar and Communication Coexistence: Channel Modeling and a Sub-6 GHz Indoor Measurement Campaign

In this work, we analyze a multi-functional reconfigurable intelligent surface (MF-RIS)-enabled radar and communication coexistence (RCC) system, detailing the key aspects of its phase synthesis codebook generation and the implemented localization algorithm for real-time user tracking based on density-based spatial clustering of applications with noise (DBSCAN), which features a Kalman filter for the prediction of user mobility. We derived a 3GPP-compatible radar cross-section (RCS) and re-radiation pattern-based channel model for the described MF-RIS system, supplementing it with channel measurements. We obtained large and small-scale characteristics, including path loss, shadow fading, Rician K-factor, cluster powers, and RMS delay spread. The study finds that Sub-6 GHz indoor propagation is largely free of blind spots, even with a blocked line-of-sight (LoS) path. Therefore, the proposed channel model includes non-line-of-sight (NLoS) paths, including the ones created by the MF-RIS. We also performed an experimental evaluation of the channel throughput in a fifth generation (5G) new radio (NR) single user multiple-input-multiple-output (SU-MIMO) system, reporting a 74\% reduction in throughput variance and a 12.5\% sum-rate improvement within the MF-RIS near-field compared to the no-RIS setup. This result shows that the MF-RIS can minimize delay spread and increase the coherence bandwidth by creating virtual-LoS (vLoS) path for the moving user, thereby effectively hardening wireless MIMO channels.

eess.SP↗

arXiv2025

Near-Field Multi-User Communications via Polar-Domain Beamfocusing: Analytical Framework and Performance Analysis

As wireless systems evolve toward higher frequencies and extremely large antenna arrays, near-field (NF) propagation becomes increasingly dominant. Unlike far-field (FF) communication, which relies on a planar-wavefront model and is limited to angular-domain beamsteering, NF propagation exhibits spherical wavefronts that enable beamfocusing in both angle and distance, i.e., the polar domain, offering new opportunities for spatial multiple access. This paper develops an analytical stochastic geometry (SG) framework for a multi-user system assisted by polar-domain beamfocusing, which jointly captures NF propagation characteristics and the spatial randomness of user locations. The intrinsic coupling between angle and distance in the NF antenna pattern renders inter-user interference analysis intractable. To address this challenge, we propose a tractable near-field multi-level antenna pattern (NF-MLAP) approximation, which enables computationally efficient expressions and tight upper bounds for key performance metrics, including coverage probability, spectrum efficiency, and area spectrum efficiency. Analytical and simulation results demonstrate that the proposed framework accurately captures performance trends and reveals fundamental trade-offs between hardware configuration (including the number of antennas and radio frequency chains) and system performance (in terms of spatial resource reuse and interference mitigation).

eess.SP↗

arXiv2025

Joint Beamforming and Position Optimization for FIRES-NOMA Assisted Wireless Communication Systems

To address the limitations of conventional reconfigurable intelligent surfaces (RIS) in spatial control capability, this paper proposes a fluid integrated reflecting and emitting surface (FIRES) assisted non-orthogonal multiple access (NOMA) multi-user communication system. In this system, each FIRES element can continuously and flexibly adjust its position in response to environmental variations, enabling simultaneous service to users in both transmission and reflection zones. This significantly enhances the system's spatial degrees of freedom (DoF) and service adaptability. To maximize the system's total sum rate, we formulate a non-convex optimization problem that jointly optimizes the base station beamforming, the transmission/reflection coefficients of the FIRES, and the element positions. An alternating optimization (AO) algorithm is developed, incorporating successive convex approximation (SCA), semi-definite relaxation (SDR), and majorization-minimization (MM) techniques. In particular, to address the complex channel coupling introduced by the coexistence of direct and FIRES paths, the MM framework is employed in the element position optimization subproblem, enabling an efficient iterative solution strategy. Simulation results validate that the proposed system achieves up to a 27% increase in total sum rate compared to conventional STAR-RIS systems and requires approximately 50% fewer RIS elements to attain the same performance, highlighting its effectiveness for cost-efficient large-scale deployment.

eess.SP↗

arXiv2025

Specific Absorption Rate-Aware Multiuser MIMO Assisted by Fluid Antenna System

With the development of the upcoming sixth-generation (6G) wireless networks, there is a pressing need for innovative technologies capable of satisfying heightened performance indicators. Fluid antenna system (FAS) is proposed recently as a promising technique to achieve higher data rates and more diversity gains by dynamically changing the positions of the antennas to form a more desirable channel. However, worries regarding the possibly harmful effects of electromagnetic (EM) radiation emitted by devices have arisen as a result of the rapid evolution of advanced techniques in wireless communication systems. Specific absorption rate (SAR) is a widely adopted metric to quantify EM radiation worldwide. In this paper, we investigate the SAR-aware multiuser multiple-input multiple-output (MIMO) communications assisted by FAS. In particular, a two-layer iterative algorithm is proposed to minimize the SAR value under signal-to-interference-plus-noise ratio (SINR) and FAS constraints. Moreover, the minimum weighted SINR maximization problem under SAR and FAS constraints is studied by finding its relationship with the SAR minimization problem. Simulation results verify that the proposed SAR-aware FAS design outperforms the adaptive backoff and fixed-position antenna designs.

eess.SP↗

arXiv2025

SCNR Maximization for MIMO ISAC Assisted by Fluid Antenna System

The integrated sensing and communication (ISAC) technology has been extensively researched to enhance communication rates and radar sensing capabilities. Additionally, a new technology known as fluid antenna system (FAS) has recently been proposed to obtain higher communication rates for future wireless networks by dynamically altering the antenna position to obtain a more favorable channel condition. The application of the FAS technology in ISAC scenarios holds significant research potential. In this paper, we investigate a FAS-assisted multiple-input multiple-output (MIMO) ISAC system for maximizing the radar sensing signal-clutter-noise ratio (SCNR) under communication signal-to-interference-plus-noise ratio (SINR) and antenna position constraints. We devise an iterative algorithm that tackles the optimization problem by maximizing a lower bound of SCNR with respect to the transmit precoding matrix and the antenna position. By addressing the non-convexity of the problem through this iterative approach, our method significantly improves the SCNR. Our simulation results demonstrate that the proposed scheme achieves a higher SCNR compared to the baselines.

cs.IT↗

arXiv2025

ELAA-ISAC: Environmental Mapping Utilizing the LoS State of Communication Channel

In this paper, a novel environmental mapping method is proposed to outline the indoor layout utilizing the line-of-sight (LoS) state information of extremely large aperture array (ELAA) channels. It leverages the spatial resolution provided by ELAA and the mobile terminal (MT)'s mobility to infer the presence and location of obstacles in the environment. The LoS state estimation is formulated as a binary hypothesis testing problem, and the optimal decision rule is derived based on the likelihood ratio test. Subsequently, the theoretical error probability of LoS estimation is derived, showing close alignment with simulation results. Then, an environmental mapping method is proposed, which progressively outlines the layout by combining LoS state information from multiple MT locations. It is demonstrated that the proposed method can accurately outline the environment layout, with the mapping accuracy improving as the number of service-antennas and MT locations increases. This paper also investigates the impact of channel estimation error and non-LoS (NLoS) components on the quality of environmental mapping. The proposed method exhibits particularly promising performance in LoS dominated wireless environments characterized by high Rician K-factor. Specifically, it achieves an average intersection over union (IoU) exceeding 80% when utilizing 256 service antennas and 18 MT locations.

cs.IT↗

arXiv2025

Near-Field Localization with Physics-Compliant Electromagnetic Model: Algorithms and Model Mismatch Analysis

Accurate signal localization is critical for Internet of Things applications, but precise propagation models are often unavailable due to uncontrollable factors. Simplified models such as planar and spherical wavefront approximations are widely used but can cause model mismatches that reduce accuracy. To address this, we propose an expected likelihood ratio framework for model mismatch analysis and online model selection without requiring knowledge of the true propagation model. The framework leverages the scenario independent distribution of the likelihood ratio of the actual covariance matrix, enabling the detection of mismatches and outliers by comparing given models to a predefined distribution. When an accurate electromagnetic model is unavailable, the robustness of the framework is analyzed using data generated from a precise electromagnetic model and simplified models within positioning algorithms. Validation in direct localization and reconfigurable intelligent surface assisted scenarios demonstrates the ability to improve localization accuracy and reliably detect model mismatches in diverse Internet of Things environments.

eess.SP↗

arXiv2024

The Rendezvous Between Extreme Value Theory and Next-generation Networks

Promising technologies such as massive multiple-input and multiple-output, reconfigurable intelligent reflecting surfaces, non-terrestrial networks, millimetre wave communication, ultra-reliable lowlatency communication are envisioned as the enablers for next-generation (NG) networks. In contrast to conventional communication systems meeting specific average performance requirements, NG systems are expected to meet quality-of-service requirements in extreme scenarios as well. In this regard, extreme value theory (EVT) provides a powerful framework for the design of communication systems. In this paper, we provide a comprehensive survey of advances in communication that utilize EVT to characterize the extreme order statistics of interest. We first give an overview of the history of EVT and then elaborate on the fundamental theorems. Subsequently, we discuss different problems of interest in NG communication systems and how EVT can be utilized for their analysis. We finally point out the open challenges and future directions of EVT in NG communication systems.

cs.IT↗

arXiv2024

EMF-Efficient MU-MIMO Networks: Harnessing Aerial RIS Technology

The rollout of the fifth-generation (5G) networks has raised some concerns about potential health effects from increased exposure to electromagnetic fields (EMF). To address these concerns, we design a novel EMF-aware architecture for uplink communications. Specifically, we propose an aerial reconfigurable intelligent surface (ARIS) assisted multi-user multiple-input multiple-output (MIMO) system, where the ARIS features a reconfigurable intelligent surface (RIS) panel mounted on an unmanned aerial vehicle (UAV), offering a flexible and adaptive solution for reducing uplink EMF exposure. We formulate and solve a new problem to minimize the EMF exposure by optimizing the system parameters, such as transmit beamforming, resource allocation, transmit power, ARIS phase shifts, and ARIS trajectory. Our numerical results demonstrate the effectiveness of EMF-aware transmission scheme over the benchmark methods, achieving EMF reductions of over 30% and 90% compared to the fixed ARIS and non-ARIS schemes, respectively.

eess.SP↗

arXiv2024

Joint Coverage and Electromagnetic Field Exposure Analysis in Downlink and Uplink for RIS-assisted Networks

Reconfigurable intelligent surfaces (RISs) have shown the potential to improve signal-to-interference-plus-noise ratio (SINR) related coverage, especially at high-frequency communications. However, assessing electromagnetic field exposure (EMFE) and establishing EMFE regulations in RIS-assisted large-scale networks remain open issues. This paper proposes a stochastic geometry (SG) based framework to characterize SINR and EMFE in such networks for downlink and uplink scenarios. Particularly, we carefully consider the association rule with the presence of RISs, accurate antenna pattern at base stations (BSs), fading model, and power control mechanism at mobile devices in the system model. Under the proposed framework, we derive the marginal and joint distributions of SINR and EMFE in downlink and uplink, respectively. The first moment of EMFE is also provided. Additionally, we design the compliance distance (CD) between a BS/RIS and a user to comply with the EMFE regulations. To facilitate efficient identification, we further provide approximate closed-form expressions for CDs. From numerical results of the marginal distributions, we find that in the downlink scenario, deploying RISs may not always be beneficial, as the improved SINR comes at the cost of increased EMFE. However, in the uplink scenario, RIS deployment is promising to enhance coverage while still maintaining EMFE compliance. By simultaneously evaluating coverage and compliance metrics through joint distributions, we demonstrate the feasibility of RISs in improving uplink and downlink performance. Insights from this framework can contribute to establishing EMFE guidelines and achieving a balance between coverage and compliance when deploying RISs.

eess.SP↗

arXiv2024

Single Antenna Tracking and Localization of RIS-enabled Vehicular Users

Reconfigurable Intelligent Surfaces (RISs) are envisioned to be employed in next generation wireless networks to enhance the communication and radio localization services. In this paper, we propose novel localization and tracking algorithms exploiting reflections through RISs at multiple receivers. We utilize a single antenna transmitter (Tx) and multiple single antenna receivers (Rxs) to estimate the position and the velocity of users (e.g. vehicles) equipped with RISs. Then, we design the RIS phase shifts to separate the signals from different users. The proposed algorithms exploit the geometry information of the signal at the RISs to localize and track the users. We also conduct a comprehensive analysis of the Cramer-Rao lower bound (CRLB) of the localization system. Compared to the time of arrival (ToA)-based localization approach, the proposed method reduces the localization error by a factor up to three. Also, the simulation results show the accuracy of the proposed tracking approach.

cs.IT↗

arXiv2024

A Physical Layer Security Framework for IRS-Assisted Integrated Sensing and Semantic Communication Systems

In this paper, we propose a physical layer security (PLS) framework for an intelligent reflecting surface (IRS)-assisted integrated sensing and semantic communication (ISASC) system, where a multi-antenna dual-functional semantic base station (BS) serves multiple semantic communication users (SCUs) and monitors a potentially malicious sensing target (MST) in the presence of an eavesdropper (EVE). Both MST and EVE attempt to wiretap information from the signals transmitted to the SCUs. The deployment of the IRS not only enhances PLS by directing a strong beam towards the SCUs, but also improves the localization information for the target without disclosing information about the SCUs. To further strengthen PLS, we employ joint artificial noise (AN) and dedicated sensing signal (DSS), in addition to wiretap coding. To evaluate sensing accuracy, we derive the Cramer-Rao bound (CRB) for estimating the direction of arrival (DoA), and to assess the PLS level of the ISASC system, we determine a closed-form expression for the semantic secrecy rate (SSR). To achieve an optimal trade-off between these two competing objectives, we formulate a multi-objective optimization problem (MOOP) for the joint design of the BS's beamforming (BF) vectors and the IRS's phase shift vector. To tackle this MOOP problem, the $\epsilon$-constraint method is employed, followed by an alternating optimization (AO)-based algorithm that leverages the classical successive convex approximation (SCA) and semidefinite relaxation (SDR) techniques. Simulation results demonstrate that the proposed scheme outperforms the baseline schemes, achieving a superior trade-off between SSR and CRB. Specifically, our proposed approach improves the sensing accuracy by 5 dB compared to the commonly adopted maximal ratio transmission (MRT) approach.

eess.SP↗

arXiv2024

EMF-Aware Waveform for Dual-functional Radar Communication Systems

Emerging dual-functional radar communication(RadCom) systems promise to revolutionize wireless systems by enabling radar sensing and communication on a shared platform, thereby enhancing spectral efficiency. However, the high transmit power required for efficient radar operation poses risks by potentially exceeding the electromagnetic field (EMF) exposure limits enforced by the regulations. To address this challenge, we propose an EMF-aware signalling design that enhances RadCom system performance while complying with EMF constraints. Our approach considers exposure levels not only experienced by network users but also in sensitive areas such as schools and hospitals, where the exposure must be further reduced. First, we model the exposure metric for the users and the sectors that encounter sensitive areas. Then, we design the waveform by exploiting the trade-off between radar and communication while satisfying the exposure constraints. We reformulate the problem as a convex optimization program and solve it in closed form using Karush Kuhn Tucker (KKT) conditions. The numerical results demonstrate the feasibility of developing a robust RadCom system with low electromagnetic (EM) radiations.

eess.SP↗

arXiv2024

Optical ISAC: Fundamental Performance Limits and Transceiver Design

This paper characterizes the optimal capacity-distortion (C-D) tradeoff in an optical point-to-point system with single-input single-output (SISO) for communication and single-input multiple-output (SIMO) for sensing within an integrated sensing and communication (ISAC) framework. We consider the optimal rate-distortion (R-D) region and explore several inner (IB) and outer bounds (OB). We introduce practical, asymptotically optimal maximum a posteriori (MAP) and maximum likelihood estimators (MLE) for target distance, addressing nonlinear measurement-to-state relationships and non-conjugate priors. As the number of sensing antennas increases, these estimators converge to the Bayesian Cram\'er-Rao bound (BCRB). We also establish that the achievable rate-Cram\'er-Rao bound (R-CRB) serves as an OB for the optimal C-D region, valid for both unbiased estimators and asymptotically large numbers of receive antennas. To clarify that the input distribution determines the tradeoff across the Pareto boundary of the C-D region, we propose two algorithms: i) an iterative Blahut-Arimoto algorithm (BAA)-type method, and ii) a memory-efficient closed-form (CF) approach. The CF approach includes a CF optimal distribution for high optical signal-to-noise ratio (O-SNR) conditions. Additionally, we adapt and refine the deterministic-random tradeoff (DRT) to this optical ISAC context.

cs.IT↗

arXiv2024

ELAA Near-Field Localization and Sensing with Partial Blockage Detection

High-frequency communication systems bring extremely large aperture arrays (ELAA) and large bandwidths, integrating localization and (bi-static) sensing functions without extra infrastructure. Such systems are likely to operate in the near-field (NF), where the performance of localization and sensing is degraded if a simplified far-field channel model is considered. However, when taking advantage of the additional geometry information in the NF, e.g., the encapsulated information in the wavefront, localization and sensing performance can be improved. In this work, we formulate a joint synchronization, localization, and sensing problem in the NF. Considering the array size could be much larger than an obstacle, the effect of partial blockage (i.e., a portion of antennas are blocked) is investigated, and a blockage detection algorithm is proposed. The simulation results show that blockage greatly impacts performance for certain positions, and the proposed blockage detection algorithm can mitigate this impact by identifying the blocked antennas.

eess.SP↗

arXiv2024

Probabilistic Constellation Shaping for Enhancing Spectral Efficiency in NOMA VLC Systems

The limited modulation bandwidth of the light emitting diodes (LEDs) presents a challenge in the development of practical high-data-rate visible light communication (VLC) systems. In this paper, a novel adaptive coded probabilistic shaping (PS)-based nonorthogonal multiple access (NOMA) scheme is proposed to improve spectral efficiency (SE) of VLC systems in multiuser uplink communication scenarios. The proposed scheme adapts its rate to the optical signal-to-noise ratio (OSNR) by utilizing non-uniformly distributed discrete constellation symbols and low complexity channel encoder. Furthermore, an alternate optimization algorithm is proposed to determine the optimal channel coding rate, constellation spacing, and probability mass function (PMF) of each user. The extensive numerical results show that the proposed PS-based NOMA scheme closely approaches the capacity of NOMA with fine granularity. Presented results demonstrate the effectiveness of our scheme in improving the SE of VLC systems in multiuser scenarios. For instance, our scheme exhibits substantial SE gains over existing schemes, namely, the pairwise coded modulation (PCM), geometric shaping (GS), and uniform-distribution schemes. These findings highlight the potential of our approach to significantly enhance VLC systems.

cs.IT↗

arXiv2024

Near-Field Fading Channel Modeling for ELAAs: From Communication to ISAC

Extremely large aperture array (ELAA) is anticipated to serve as a pivotal feature of future multiple-input multiple-output (MIMO) systems in 6G. Near-field (NF) fading channel models are essential for reliable link-level simulation and ELAA system design. In this article, we propose a framework designed to generate NF fading channels for both communication and integrated sensing and communication (ISAC) applications. The framework allows a mixed of line of sight (LoS) and non-LoS (NLoS) links. It also considers spherical wave model and spatially non-stationary shadow fading. Based on this framework, we propose a three-dimensional (3D) fading channel model for ELAA systems deployed with a uniform rectangular array (URA). It can capture the impact of sensing object for ISAC applications. Moreover, all parameters involved in the framework are based on specifications or measurements from the 3rd Generation Partnership Project (3GPP) documents. Therefore, the proposed framework and channel model have the potential to contribute to the standard in various aspects, including ISAC, extra-large (XL-) MIMO, and reconfigurable intelligent surface (RIS) aided MIMO systems. Finally, future directions for ELAA are presented, including not only NF channel modeling but also the design of next-generation transceivers.

cs.IT↗