arXiv subjects
Publications and source records attributed to Adonis Bogris.
We compare the sensitivity of fibre interferometers to vibrations using microwave oscillators and state of the art lasers over distances up to 70 km. High spectral purity lasers outperform only above 10 Hz, highlighting microwave advantages at low frequencies and the potential of hybrid microwave optical interferometry systems
In this work we experimentally investigate the spiking dynamics of two-section InP quantum-well lasers monolithically integrated on silicon. By appropriately tuning the electrical bias conditions, we realize multiple neuronal-like operating regimes, such as integrate-and-fire and resonate-and-fire, highlighting the device's versatility as a high-speed photonic neuron. A systematic investigation of laser design parameters, including cavity length and gain/saturable absorber ratio, elucidates their impact on spiking-related properties (such as pulse repetition frequency) and traces the operational parameter space that unlocks stable spiking. Finally, these findings pave the way toward scalable neuromorphic photonic integrated circuits, where low-loss silicon synapses coexist with versatile laser neurons.
We demonstrate low-cost microwave frequency fibre interferometry for per-span monitoring of a 1,770 km operational subsea cable connecting Ireland and Iceland. Over four months, this approach successfully resolved tidal variations, storms, and teleseismic earthquakes, highlighting its potential for large-scale, cost-effective ocean monitoring.
We demonstrate a data-driven framework for emulating high-speed VCSEL-based 4-level Pulse Amplitude Modulation (PAM-4) optical interconnects using bidirectional Long Short-Term Memory (Bi-LSTM) networks. Unlike conventional rate-equation models, which are computationally intensive and often require difficult parameter tuning, our approach utilizes experimental waveforms to learn the end-to-end system dynamics. By employing transfer learning and weight interpolation, we extend the model to new operating regimes with a 20-fold reduction in computation time compared to independent training, while maintaining normalized mean squared error below 0.04. This emulator provides a rapid, accurate tool for the design and optimization of short-reach optical links.
Programmable integrated photonics aims to replicate the versatility of field-programmable gate arrays in the optical domain. However, scaling these systems has been prevented by the high power consumption and thermal crosstalk of conventional volatile phase shifters. Here, we demonstrate the first non-volatile field-programmable photonic gate array, implemented on a hybrid silicon-barium titanate platform. Unlike traditional thermo-optic devices that require constant power to maintain a state, our device utilizes ferroelectric domain switching to provide non-volatile memory, allowing optical circuits to be programmed and retained without any holding power or electrical bias. The hexagonal waveguide mesh integrates 58 programmable unit cells and 116 actuators, achieving nanosecond-scale switching speeds of 80 nanoseconds while reducing static power consumption to negligible levels (560 nanowatts per {\pi} phase shift). To validate this platform, we configured the mesh to perform diverse signal processing functions, including tunable filtering, 4x4 linear unitary transformations, and optical routing. This work establishes non-volatile ferroelectric silicon photonics as a scalable, heat-free platform essential for the next generation of energy-efficient photonic computing.
Photonic convolutional accelerators have emerged as low-energy alternatives to power-demanding digital convolutional neural networks, though they often face limitations in scalability. In this work, we introduce a convolutional photonic accelerator that employs programmable kernels manifesting as trainable waveforms in the frequency domain to enable low-energy, high-throughput scalable image classification. The proposed scheme inherently provides dimensionality reduction and feature extraction directly in the optical domain. Numerical results targeting the Fashion-MNIST show that by using only 16 optical nodes, the system's classification accuracy tops at 90.1% when typical backpropagation is used. Moreover, by adapting the training technique to the forward-forward approach, a marginal drop of 1% is recorded compared to the backpropagation scenario, thus showcasing the compatibility of the overall architecture with a hardware-friendly training approach. Finally, we experimentally implement the trained kernels using a programmable waveshaper. Despite the difference between the simulated and experimentally generated transfer functions of the programmable kernels, the classification accuracy based on the experimentally obtained kernels exhibits a marginal 0.2% reduction, proving the validity of the idea and its high robustness to variations of the frequency-applied complex weights.
An alternative extreme learning machine -ELM- paradigm is presented exploiting random non-linearities -RN, named RN-ELM, instead of a conventional fixed node non-linearity. This method is implemented on a hybrid neural engine, with the physical layer realized by an integrated silicon photonic mesh and the digital layer by a simple regression algorithm. Non-linearities are intrinsically non-power depended and are generated through non-linear frequency to power mapping offered by optical filters. The numerical evaluation is based on an experimentally derived transfer function of an all-pass filter, implemented on a silicon reconfigurable photonic integrated chip -RPIC. RN-ELM is evaluated in a twofold manner; first as a machine learning scheme, where the expressivity offered by multiple, yet random, activation functions lead to a compact and highly simplified design with 5 optical filters, offering state-of-the-art performance in time-series prediction tasks with minimum hardware requirements. The second scenario entails its deployment as a physical unclonable function -PUF, for authentication applications directly in the physical layer. In this case, the random activation functions are associated with unavoidable, fabrication related waveguide imperfections that can act as hardware signatures. Numerical results reveal a probability of cloning as low as 10e-15, which corresponds to a highly secure authentication token.
We present a calibration framework for a Microwave Frequency Fiber Interferometer (MFFI) aimed at estimating earthquake distance and magnitude, with the long-term goal of enabling early warning capabilities. This marks the first demonstration of calibrated MFFI sensing for quantitative seismic parameter retrieval
We report recurrent optical spectrum slicers as multi-wavelength optical processors in dispersion impaired IM/DD transmission systems with the use of programmable photonics. We demonstrate simultaneous equalization of three 64 Gb/s PAM-4 wavelengths after 75 km in the C-band and high tolerance to wavelength grid.
We present an experimental imaging flow cytometer using a 1 {\mu}s temporal resolution event-based CMOS camera, with data processed by adaptive feedforward and recurrent spiking neural networks. Our study classifies PMMA particles (12, 16, 20 {\mu}m) flowing at 0.7 m/s in a microfluidic channel. Processing of experimental data highlighted that spiking recurrent networks, including LSTM and GRU models, achieved 98.4% accuracy by leveraging temporal dependencies. Additionally, adaptation mechanisms in lightweight feedforward spiking networks improved accuracy by 4.3%. This work outlines a technological roadmap for neuromorphic-assisted biomedical applications, enhancing classification performance while maintaining low latency and sparsity.
In this work, we experimentally validate the dual use of a reconfigurable photonic integrated mesh as a neuromorphic accelerator, targeting signal equalization, and as a physical unclonable function offering authentication at the hardware level. The processing node is an optical spectrum slicing self-coherent transceiver targeting the mitigation of dispersion impairments of an intensity detected QPSK signal, after 25 km of transmission at 32 Gbaud. Unavoidable fabrication related imperfections of the nodes, such as waveguide roughness, can act as fingerprints of the device, and, during neuromorphic processing, result in unique weights at the digital back-end during signal equalization. Extracted security metrics offer low false positive/negative probability for the generated responses, confirming un-clonability, whereas bit-error-ratio for the QPSK equalization task was always below the hardware forward error correction limit. The experimental results substantiate the capability of the proposed scheme to simultaneously act as an accelerator and as a security token.
In this paper, we introduce an all-optical metro network architecture, called MOON, to serve converged multigranular traffic from fixed, mobile, and edge computing services. Since traffic is characterized by high dynamicity and diverse access requirements, MOON uses network slicing to provide quality of service (QoS) aware wavelength allocation to fulfill the various applications traffic demands. MOON incorporates hybrid optical switching (HOS) combining optical circuit switching (OCS) and optical time slotted switching (OTS) capabilities that appropriately maps different traffic types to them. Specifically, the OCS network slice explicitly serves aggregated traffic of long duration and high volume, while OTS network slice serves short bursty traffic. In order to provide flexibility, separate sets of wavelengths are used for OCS and OTS traffic service, both within a metro-access network (MAN) (intra-MAN) and between different MANs (inter-MAN). We extensively study the required number of wavelengths to efficiently serve OCS and OTS traffic for intra- and inter-MAN communication scenarios, taking into account their specific traffic access requirements in an effort to optimize wavelengths utilization. In our study, we assume nonblocking OCS communication for immediate access; therefore the number of required OCS wavelengths depends only on the number of nodes, while the number of required OTS wavelengths to obtain a desired QoS and latency level is independent from the number for OCS wavelengths. Simulation results show that within an OTS intra-MAN we achieve end-to-end (E2E) latency in submilliseconds scale, suitable for dynamic bursty traffic, while it is an decreasing function of the number of used OTS wavelengths.
High order modulation formats constitute the most prominent way for increasing spectral efficiency in transmission systems. Coherent transceivers that support such higher order formats require heavy digital signal processing (DSP), which increases the power consumption of coherent pluggables, well above the intensity modulation and direct detection (IM/DD) counterparts. Self-coherent or phase retrieval methods have emerged as potential solutions, trying to combine the merits of coherent technology with the simplicity of direct detection. In this work, we experimentally demonstrate the reception of quadrature amplitude modulation (QAM) modulation formats based on direct detection aided by the recurrent optical spectrum slicing (ROSS) photonic accelerator, utilizing minimal DSP and low modulator driving voltages. We experimentally demonstrate 32 Gbaud QAM-4/16 for 25 km, 50 km and 75 km in the C-band aided by a linear digital equalization and the use of programmable photonics as recurrent optical spectrum slicers. We showcase successful detection with driving swings below V{\pi}/3 in contrast to the full swing required by conventional coherent transceivers. We further improve the system performance utilizing geometric constellation shaping. Finally, we explore the potential power consumption improvement for the next-generation 1.6T pluggables, showcasing over 40% reduction with respect to the most lightweight state of the art coherent solutions reported in literature
In this work, we present and experimentally validate a passive photonic-integrated neuromorphic accelerator that uses a hardware-friendly optical spectrum slicing technique through a reconfigurable silicon photonic mesh. The proposed scheme acts as an analogue convolutional engine, enabling information preprocessing in the optical domain, dimensionality reduction and extraction of spatio-temporal features. Numerical results demonstrate that utilizing only 7 passive photonic nodes, critical modules of a digital convolutional neural network can be replaced. As a result, a 98.6% accuracy on the MNIST dataset was achieved, with a power consumption reduction of at least 26% compared to digital CNNs. Experimental results confirm these findings, achieving 97.7% accuracy with only 3 passive nodes.
In this work, we present experimental results of a high-speed label-free imaging cytometry system that seamlessly merges the high-capturing rate and data sparsity of an event-based CMOS camera with lightweight photonic neuromorphic processing. This combination offers high classification accuracy and a massive reduction in the number of trainable parameters of the digital machine-learning back-end. The photonic neuromorphic accelerator is based on a hardware-friendly passive optical spectrum slicing technique that is able to extract meaningful features from the generated spike-trains. The experimental scenario comprises the discrimination of artificial polymethyl methacrylate calibrated beads, having different diameters, flowing at a mean speed of 0.01m/sec. Classification accuracy, using only lightweight, digital machine-learning schemes has topped at 98.2%. On the other hand, by experimentally pre-processing the raw spike data through the proposed photonic neuromorphic spectrum slicer we achieved an accuracy of 98.6%. This performance was accompanied by a reduction in the number of trainable parameters at the classification back-end by a factor ranging from 8 to 22, depending on the configuration of the digital neural network.
In this paper, we experimentally validate our previous numerical works in recurrent optical spectrum slicing (ROSS) accelerators for dispersion compensation in high-speed IM/DD links. For this, we utilize recurrent filters implemented both through a waveshaper and by exploiting novel integrated programmable photonic platforms. Different recurrent configurations are tested. The ROSS accelerators exploit frequency processing through recurrent optical filter nodes in order to mitigate the power fading effect, which hinders the transmission distance and baudrate scalability of IM/DD systems. By equalizing even 80 km of 64 Gb/s PAM-4 transmission in C-band, we prove that our system can offer an appealing solution in highly dispersive channels.
In this work we provide numerical results concerning a silicon-on-insulator photonic neuromorphic circuit configured as a physical unclonable function. The proposed scheme is enhanced with the capability to be operated as an unconventional deterministic pseudo-random number generator, suitable for cryptographic applications that alleviates the need for key storage in non-volatile digital media. The proposed photonic neuromorphic scheme is able to offer NIST test compatible numbers with an extremely low false positive/negative probability below 10-14. The proposed scheme offers multi-functional capabilities due to the fact that it can be simultaneously used as an integrated photonic accelerator for machine-learning applications and as a hardware root of trust.
In this work we numerically analyze a photonic unconventional accelerator based on the four-wave mixing effect in highly nonlinear waveguides. The proposed scheme can act as a fully analogue system for nonlinear signal processing directly in the optical domain. By exploiting the rich Kerr-induced nonlinearities, multiple nonlinear transformations of an input signal can be generated and used for solving complex nonlinear tasks. We first evaluate the performance of our scheme in the Santa-Fe chaotic time-series prediction. The true power of this processor is revealed in the all-optical nonlinearity compensation in an optical communication scenario where we provide results superior to those offered by strong machine learning algorithms with reduced power consumption and computational complexity. Finally, we showcase how the FWM module can be used as a reconfigurable nonlinear activation module being capable of reproducing characteristic functions such as sigmoid or rectified linear unit.