arXiv subjects

Adam Wysocki

Publications and source records attributed to Adam Wysocki.

15 recordsLinked to original sources

arXiv2024

Collective chemotactic search

We investigate collective search by self-propelled agents that are repelled by their own chemically produced trails, a minimal mechanism that simultaneously generates indirect interactions and memory. Using lattice and off-lattice models, we show that this mechanism enhances search efficiency through two distinct regimes. In a weak-memory regime, chemical cues are short-lived and interactions primarily promote spatial separation between agents. This reduces redundant exploration while preserving mobility, leading to an optimal trade-off between spatial order and persistence. In a strong-memory regime, long-lived chemical trails induce effective self-avoidance, strongly suppressing revisits and long search times. Here optimal search occurs at finite memory strength: permanently persistent trails lead to self-caging, while moderate memory enables efficient exploration. At higher densities, overlapping chemical trails give rise to a collective self-avoidance mechanism that yields substantial cooperative speedup without global spatial order. Together, these results show how chemically mediated memory and interactions can optimize collective search across distinct dynamical regimes.

cond-mat.soft↗

arXiv2023

Stationary particle currents in sedimenting active matter wetting a wall

Recently it was predicted, on the basis of a lattice gas model, that scalar active matter in a gravitational field would rise against gravity up a confining wall or inside a thin capillary - in spite of repulsive particle-wall interactions [Phys. Rev. Lett. 124, 048001 (2020)]. In this paper we confirm this prediction with sedimenting active Brownian particles (ABPs) in a box numerically and elucidate the mechanism leading to the formation of a meniscus rising above the bulk of the sedimentation region. The height of the meniscus increases with the activity of the system, algebraically with the P\'eclet number. The formation of the meniscus is determined by a stationary circular particle current, a vortex, centered at the base of the meniscus, whose size and strength increase with the ABP activity. The origin of these vortices can be traced back to the confinement of the ABPs in a box: already the stationary state of ideal (non-interacting) ABPs without gravitation displays circular currents that arrange in a highly symmetric way in the eight octants of the box. Gravitation distorts this vortex configuration downward, leaving two major vortices at the two side walls, with a strong downward flow along the walls. Repulsive interactions between the ABPs change this situation only as soon as motility induced phase separation (MIPS) sets in and forms a dense, sedimented liquid region at the bottom, which pushes the center of the vortex upwards towards the liquid-gas interface. Self-propelled particles therefore represent an impressive realization of scalar active matter that forms stationary particle currents being able to perform visible work against gravity or any other external field, which we predict to be observable experimentally in active colloids under gravitation.

cond-mat.soft↗

arXiv2023

How to steer active colloids up a vertical wall

An important challenge in active matter lies in harnessing useful global work from entities that produce work locally, e.g., via self-propulsion. We investigate here the active matter version of a classical capillary rise effect, by considering a non-phase separated sediment of self-propelled Janus colloids in contact with a vertical wall. We provide experimental evidence of an unexpected and dynamic adsorption layer at the wall. Additionally, we develop a complementary numerical model that recapitulates the experimental observations. We show that an adhesive and aligning wall enhances the pre-existing polarity heterogeneity within the bulk, enabling polar active particles to climb up a wall against gravity, effectively powering a global flux. Such steady-state flux has no equivalent in a passive wetting layer.

cond-mat.soft↗

arXiv2022

Interacting particles in an activity landscape

We study interacting active Brownian particles (ABPs) with a space-dependent swim velocity via simulation and theory. We find that, although an equation of state exists, a mechanical equilibrium does not apply to ABPs in activity landscapes. The pressure difference originates in the flux of polar order and the gradient of swim velocity across the interface between regions of different activity. In contrast to motility-induced phase separation of ABPs with a homogeneous swim velocity, a critical point does not exist for an active-passive patch system, which continuously splits into a dense and a dilute phase with increasing activity. However, if the global density is so high that not all particles can be packed onto the inactive patch, then MIPS-like behavior is restored and the pressure is balanced again.

cond-mat.soft↗

arXiv2021

Striped Patterns in Radially Driven Suspensions with Open Boundaries

We study the motion of radially driven fluid-immersed particles in a novel Hele-Shaw cell with open boundaries. The initially uniform suspension forms a striped pattern within a specific range of horizontal oscillation frequencies and for sufficiently large amplitudes. We observe that the initial coarsening dynamics of the stripes gradually slows down and the pattern reaches a steady state after a few minutes. The distance between the stripes in the steady state exhibits an exponentially saturating increase with increased oscillation amplitude or frequency. The width of the stripes decreases as a power-law with the frequency while its amplitude dependence follows a logistic function. We propose a mechanism -- based on the interplay between shear stress, hydrodynamic interactions, and frictional forces -- to link the structural characteristics of the stripes to the properties of the oscillatory external drive.

cond-mat.soft↗

arXiv2019

Computational models for active matter

A variety of computational models have been developed to describe active matter at different length and time scales. The diversity of the methods and the challenges in modeling active matter---ranging from molecular motors and cytoskeletal filaments over artificial and biological swimmers on microscopic to groups of animals on macroscopic scales---mainly originate from their out-of-equilibrium character, multiscale nature, nonlinearity, and multibody interactions. In the present review, various modeling approaches and numerical techniques are addressed, compared, and differentiated to illuminate the innovations and current challenges in understanding active matter. The complexity increases from minimal microscopic models of dry active matter toward microscopic models of active matter in fluids. Complementary, coarse-grained descriptions and continuum models are elucidated. Microscopic details are often relevant and strongly affect collective behaviors, which implies that the selection of a proper level of modeling is a delicate choice, with simple models emphasizing universal properties and detailed models capturing specific features. Finally, current approaches to further advance the existing models and techniques to cope with real-world applications, such as complex media and biological environments, are discussed.

cond-mat.soft↗

arXiv2019

Capillary action in scalar active matter

We study the capacity of active matter to rise in thin tubes against gravity and other related phenomena, like, wetting of vertical plates and spontaneous imbibition, where a wetting liquid is drawn into a porous medium. This capillary action or capillarity is well known in classical fluids and originates from attractive interactions between the liquid molecules and the container walls, and from the attraction of the liquid molecules among each other. We observe capillarity in a minimal model for scalar active matter with purely repulsive interactions, where an effective attraction emerges due to slowdown during collisions between active particles and between active particles and walls. Simulations indicate that the capillary rise in thin tubes is approximately proportional to the active sedimentation length $\lambda$ and that the wetting height of a vertical plate grows superlinear with $\lambda$. In a disordered porous medium the imbibition height scales as $\langle h\rangle\propto\lambda\phi_m$, where $\phi_m$ is its packing fraction.

cond-mat.soft↗

arXiv2016

Traveling fronts in active-passive particle mixtures

The emergent dynamics in phase-separated mixtures of isometric active and passive Brownian particles is studied numerically in two dimensions. A novel steady-state of well-defined traveling fronts is observed, where the interface between the dense and the dilute phase propagates and the bulk of both phases is (nearly) at rest. Two kind of interfaces, advancing and receding, are formed by spontaneous symmetry breaking, induced by an instability of a planar interface due to the formation of localized vortices. The propagation arises due to flux imbalance at the interface, strongly resembling traveling fronts in reaction-diffusion systems. Above a threshold, the interface velocity decreases linearly with increasing fraction of active particles.

cond-mat.soft↗

arXiv2015

Virial pressure in systems of active Brownian particles

The pressure of suspensions of self-propelled objects is studied theoretically and by simulation of spherical active Brownian particles (ABP). We show that for certain geometries, the mechanical pressure as force/area of a confined systems can equally be expressed by bulk properties, which implies the existence of an nonequilibrium equation of state. Exploiting the virial theorem, we derive expressions for the pressure of ABPs confined by solid walls or exposed to periodic boundary conditions. In both cases, the pressure comprises three contributions: the ideal-gas pressure due to white-noise random forces, an activity-induce pressure (swim pressure), which can be expressed in terms of a product of the bare and a mean effective propulsion velocity, and the contribution by interparticle forces. We find that the pressure of spherical ABPs in confined systems explicitly depends on the presence of the confining walls and the particle-wall interactions, which has no correspondence in systems with periodic boundary conditions. Our simulations of three-dimensional APBs in systems with periodic boundary conditions reveal a pressure-concentration dependence that becomes increasingly nonmonotonic with increasing activity. Above a critical activity and ABP concentration, a phase transition occurs, which is reflected in a rapid and steep change of the pressure. We present and discuss the pressure for various activities and analyse the contributions of the individual pressure components.

cond-mat.stat-mech↗

arXiv2015

Giant adsorption of microswimmers: duality of shape asymmetry and wall curvature

The effect of shape asymmetry of microswimmers on their adsorption capacity at confining channel walls is studied by a simple dumbbell model. For a shape polarity of a forward-swimming cone, like the stroke-averaged shape of a sperm, extremely long wall retention times are found, caused by a non-vanishing component of the propulsion force pointing steadily into the wall, which grows exponentially with the self-propulsion velocity and the shape asymmetry. A direct duality relation between shape asymmetry and wall curvature is proposed and verified. Our results are relevant for the design microswimmer with controlled wall-adhesion properties. In addition, we confirm that pressure in active systems is strongly sensitive to the details of the particle-wall interactions.

cond-mat.soft↗

arXiv2014

Hydrodynamic simulations of self-phoretic microswimmers

A mesoscopic hydrodynamic model to simulate synthetic self-propelled Janus particles which is thermophoretically or diffusiophoretically driven is here developed. We first propose a model for a passive colloidal sphere which reproduces the correct rotational dynamics together with strong phoretic effect. This colloid solution model employs a multiparticle collision dynamics description of the solvent, and combines potential interactions with the solvent, with stick boundary conditions. Asymmetric and specific colloidal surface is introduced to produce the properties of self-phoretic Janus particles. A comparative study of Janus and microdimer phoretic swimmers is performed in terms of their swimming velocities and induced flow behavior. Self-phoretic microdimers display long range hydrodynamic interactions and can be characterized as pullers or pushers. In contrast, Janus particles are characterized by short range hydrodynamic interactions and behave as neutral swimmers. Our model nicely mimics those recent experimental realization of the self-phoretic Janus particles.

cond-mat.soft↗

arXiv2014

Glass-Transition Properties from Hard Spheres to Charged Point Particles

The glass transition is investigated in three dimensions for single and double Yukawa potentials for the full range of control parameters. For vanishing screening parameter, the limit of the one-component plasma is obtained; for large screening parameters and high coupling strengths, the glass-transition properties crossover to the hard-sphere system. Between the two limits, the entire transition diagram can be described by analytical functions. Different from other potentials, the glass-transition and melting lines for Yukawa potentials are found to follow shifted but otherwise identical curves in control-parameter space.

cond-mat.stat-mech↗

arXiv2013

Cooperative Motion of Active Brownian Spheres in Three-Dimensional Dense Suspensions

The structural and dynamical properties of suspensions of self-propelled Brownian particles of spherical shape are investigated in three spatial dimensions. Our simulations reveal a phase separation into a dilute and a dense phase, above a certain density and strength of self-propulsion. The packing fraction of the dense phase approaches random close packing at high activity, yet the system remains fluid. Although no alignment mechanism exists in this model, we find long-lived cooperative motion of the particles in the dense regime. This behavior is probably due to an interface-induced sorting process. Spatial displacement correlation functions are nearly scale-free for systems with densities close to or above the glass transition density of passive systems.

cond-mat.soft↗

arXiv2008

Oscillatory driven colloidal binary mixtures: axial segregation versus laning

Using Brownian dynamics computer simulations we show that binary mixtures of colloids driven in opposite directions by an oscillating external field exhibit axial segregation in sheets perpendicular to the drive direction. The segregation effect is stable only in a finite window of oscillation frequencies and driving strengths and is taken over by lane formation in direction of the driving field if the driving force is increased. In the crossover regime, bands tilted relative to the drive direction are observed. Possible experiments to verify the axial segregation are discussed.

cond-mat.soft↗

arXiv2008

Direct observation of hydrodynamic instabilities in driven non-uniform colloidal dispersions

A Rayleigh-Taylor-like instability of a dense colloidal layer under gravity in a capillary of microfluidic dimensions is considered. We access all relevant lengthscales with particle-level microscopy and computer simulations which incorporate long-range hydrodynamic interactions between the particles. By tuning the gravitational driving force, we reveal a mechanism whose growth is connected to the fluctuations of specific wavelengths, non-linear pattern formation and subsequent diffusion-dominated relaxation. Our linear stability theory captures the initial regime and thus predicts mixing conditions, with important implications for fields ranging from biology to nanotechnology.

cond-mat.soft↗