arXiv subjects

Adam Taras

Publications and source records attributed to Adam Taras.

9 recordsLinked to original sources

arXiv2026

NEXT: The Netherlands EXoplanet Testbed I. Goals and opto-mechanical design

We report on the goals, design, and ongoing development of the Netherlands EXoplanet Testbed (NEXT), a high-contrast imaging testbed under construction in Leiden. NEXT is designed to develop and validate technologies and algorithms for extreme adaptive optics (XAO) and coronagraphy at the performance levels required by the next generation of high-contrast imagers on the Extremely Large Telescopes (ELTs) and future space observatories. All powered optics in the common path are custom off-axis parabolas, making the bench fully reflective up to the science cameras, and it operates from the visible to the near-infrared (500-1800 nm). It combines a woofer-tweeter XAO module, using an ALPAO woofer and a Boston Micromachines kilo-DM as tweeter, with a coronagraphic arm that supports common coronagraph architectures and focal-plane wavefront control for dark-hole digging, and reserves space for a suite of wavefront sensors. The design targets a raw contrast of $10^{-7}$ (goal: $10^{-8}$) at $5\lambda/D$ and 800 nm. We present the opto-mechanical design of the testbed, the key trade-offs made to reach these contrast levels, and Fresnel-propagation simulations of its predicted performance.

astro-ph.IM↗

arXiv2026

Demonstration of simultaneous PIAA- coronagraphy and wavefront sensing using a single metasurface-based focal-plane optic

Controlling residual wavefront aberrations downstream of an extreme adaptive optics (ExAO) system is a major challenge in high-contrast imaging. These aberrations produce quasi-static speckles due to differences between the wavefront-sensing and science paths. Highly sensitive wavefront sensors, such as Zernike wavefront sensors (ZWFSs), are used to mitigate these non-common path aberrations. High-performing coronagraphs, such as complex mask coronagraphs (CMCs), are also implemented in the focal plane. Both perform better with lossless apodization such as phase-induced amplitude apodization (PIAA) optics. Metasurfaces can have chromatic responses, allowing a single focal-plane optic to have different functionalities in different wavelength bands. We demonstrate such an optic by manufacturing a hybrid metasurface designed to function as a CMC and a ZWFS in two intermediate-band filters in the H band, each with a fractional bandwidth of approximately 1\%. We show measured optical responses with phases of $\sim \pi/2$ at shorter wavelengths and $\pi$ at longer wavelengths between $1500$ and $1700,\text{nm}$. This would allow for wavefront sensing at the shorter wavelength of $\sim1500\,\text{nm}$ and coronagraphy at the longer wavelength of $\sim1700\,\text{nm}$. Additionally, we tested the mask on-sky with the MagAO-X instrument at the Magellan Clay 6.5 m telescope at Las Campanas Observatory, Chile. On-sky results show a contrast of $\sim 10^{-1}$ at a non-ideal wavelength of $\sim 1600\,\text{nm}$. This is comparable to simulated contrast curves using the measured optical responses around that wavelength. Finally, we evaluated the wavefront-sensing performance of the metasurface using the MagAO-X internal source at $1300\,\mathrm{nm}$. The measured reconstruction error is consistent with simulations of an ideal Zernike wavefront sensor, confirming its wavefront-sensing functionality.

astro-ph.IM↗

arXiv2026

The TOLIMAN mission: A low-cost space telescope for high precision narrow-angle astrometry

The TOLIMAN project is engaged with the construction, launch and operation of a low-cost space telescope of unorthodox optical design. Its primary science goal targets an exhaustive search for temperate-orbit rocky planets around either star in the alpha Centauri AB binary within our nearest-neighbor star system. Despite their favorable proximity and brightness, the detection of terrestrial exoplanets around such nearby Sun-like stars remains problematic for contemporary instrumental approaches. By performing narrow-angle astrometric monitoring of binary stars at extreme precision, any exoplanets will betray their presence by way of gravitationally-induced perturbations on the binary orbit. Recovery of this signal is challenging for it amounts to only a few microarcseconds of angular deflection (at best), and so is normally thought to require a large (meter-class) instrument. By implementing an innovative optical and signal encoding architecture, the TOLIMAN space telescope aims to recover such signals with a telescope aperture of only 12.5cm. This paper gives an overview of key features of the mission; in particular the concepts underlying the optics to enable image registration at the extreme levels of precision required. An outline is also provided, sketching further mission components and systems incorporated into the 16U CubeSat spacecraft bus in which the science payload is housed - all of which are now under construction.

astro-ph.IM↗

arXiv2025

On-sky Demonstration of Subdiffraction-limited Astronomical Measurement Using a Photonic Lantern

Resolving fine details of astronomical objects provides critical insights into their underlying physical processes. This drives in part the desire to construct ever-larger telescopes and interferometer arrays and to observe at shorter wavelength to lower the diffraction limit of angular resolution. Alternatively, one can aim to overcome the diffraction limit by extracting more information from a single telescope's aperture. A promising way to do this is spatial mode-based imaging, which projects focal-plane field onto a set of spatial modes before detection, retaining focal-plane phase information crucial at small angular scales but typically lost in intensity imaging. However, the practical implementation of mode-based imaging in astronomy from the ground has been challenged by atmospheric turbulence. Here, we present the first on-sky demonstration of a subdiffraction-limited, mode-based measurement using a photonic lantern (PL)-fed spectrometer installed on the SCExAO instrument at the Subaru Telescope. We introduce a novel calibration strategy that mitigates time-varying wavefront error and misalignment effects, leveraging simultaneously recorded focal-plane images and using a spectral-differential technique that self-calibrates the data. Observing the classical Be star $\beta$ CMi, we detected spectral-differential spatial signals and reconstructed images of its H$\alpha$-emitting disk. We achieved an unprecedented H$\alpha$ photocenter precision of 50$\mu$as in about 10-minute observation with a single telescope, measuring the disk's near-far side asymmetry for the first time. This work demonstrates the high precision, efficiency, and practicality of photonic mode-based imaging techniques to recover subdiffraction-limited information, opening new avenues for high angular resolution spectroscopic studies in astronomy.

astro-ph.IM↗

arXiv2024

The GLINT nulling interferometer: improving nulls for high-contrast imaging

GLINT is a nulling interferometer downstream of the SCExAO extreme-adaptive-optics system at the Subaru Telescope (Hawaii, USA), and is a pathfinder instrument for high-contrast imaging of circumstellar environments with photonic technologies. GLINT is effectively a testbed for more stable, compact, and modular instruments for the era of 30m-class telescopes. GLINT is now undergoing an upgrade with a new photonic chip for more achromatic nulls, and for phase information to enable fringe tracking. Here we provide an overview of the motivations for the GLINT project and report on the design of the new chip, the on-site installation, and current status.

astro-ph.IM↗

arXiv2024

L-band nulling interferometry at the VLTI with Asgard/NOTT: status and plans

NOTT (formerly Hi-5) is the L'-band (3.5-4.0~microns) nulling interferometer of Asgard, an instrument suite in preparation for the VLTI visitor focus. The primary scientific objectives of NOTT include characterizing (i) young planetary systems near the snow line, a critical region for giant planet formation, and (ii) nearby main-sequence stars close to the habitable zone, with a focus on detecting exozodiacal dust that could obscure Earth-like planets. In 2023-2024, the final warm optics have been procured and assembled in a new laboratory at KU Leuven. First fringes and null measurements were obtained using a Gallium Lanthanum Sulfide (GLS) photonic chip that was also tested at cryogenic temperatures. In this paper, we present an overall update of the NOTT project with a particular focus on the cold mechanical design, the first results in the laboratory with the final NOTT warm optics, and the ongoing Asgard integration activities. We also report on other ongoing activities such as the characterization of the photonic chip (GLS, LiNbO3, SiO), the development of the exoplanet science case, the design of the dispersion control module, and the progress with the self-calibration data reduction software.

astro-ph.IM↗

arXiv2024

Pushing high angular resolution and high contrast observations on the VLTI from Y to L band with the Asgard instrumental suite: integration status and plans

ESO's Very Large Telescope Interferometer has a history of record-breaking discoveries in astrophysics and significant advances in instrumentation. The next leap forward is its new visitor instrument, called Asgard. It comprises four natively collaborating instruments: HEIMDALLR, an instrument performing both fringe tracking and stellar interferometry simultaneously with the same optics, operating in the K band; Baldr, a Strehl optimizer in the H band; BIFROST, a spectroscopic combiner to study the formation processes and properties of stellar and planetary systems in the Y-J-H bands; and NOTT, a nulling interferometer dedicated to imaging nearby young planetary systems in the L band. The suite is in its integration phase in Europe and should be shipped to Paranal in 2025. In this article, we present details of the alignment and calibration unit, the observing modes, the integration plan, the software architecture, and the roadmap to completion of the project.

astro-ph.IM↗

arXiv2024

CHARA/Silmaril Instrument Software and Data Reduction Pipeline: Characterization of the Instrument in the Lab and On-Sky

The newly installed Silmaril beam combiner at the CHARA array is designed to observe previously inaccessible faint targets, including Active Galactic Nuclei and T-Tauri Young Stellar Objects. Silmaril leverages cutting-edge optical design, low readout noise, and a high-speed C-RED1 camera to realize its sensitivity objectives. In this presentation, we offer a comprehensive overview of the instrument's software, which manages critical functions, including camera data acquisition, fringe tracking, automatic instrument alignment, and observing interfaces, all aimed at optimizing on-sky data collection. Additionally, we offer an outline of the data reduction pipeline, responsible for converting raw instrument data products into the final OIFITS used by the standard interferometry modeling software. The purpose of this paper is to provide a solid reference for studies based on Silmaril data.

astro-ph.IM↗

arXiv2023

High-angular resolution and high-contrast VLTI observations from Y to L band with the Asgard instrumental suite

The Very Large Telescope Interferometer is one of the most proficient observatories in the world for high angular resolution. Since its first observations, it has hosted several interferometric instruments operating in various bandwidths in the infrared. As a result, the VLTI has yielded countless discoveries and technological breakthroughs. Here, we introduce a new concept for the VLTI, Asgard: an instrumental suite comprised of four natively collaborating instruments: BIFROST, a combiner whose main science case is studying the formation processes and properties of stellar and planetary systems; NOTT, a nulling interferometer dedicated to imaging young nearby planetary systems in the L band; HEIMDALLR, an all-in-one instrument performing both fringe tracking and stellar interferometry with the same optics; Baldr, a Strehl optimiser. These instruments share common goals and technologies. The goals are diverse astrophysical cases such as the study of the formation and evolution processes of binary systems, exoplanetary systems and protoplanetary disks, the characterization of orbital parameters and spin-orbit alignment of multiple systems, the characterization of the exoplanets, and the study of exozodiacal disks. Thus, the idea of this suite is to make the instruments interoperable and complementary to deliver unprecedented sensitivity and accuracy from the J to M bands to meet these goals. The interoperability of the Asgard instruments and their integration in the VLTI are major challenges for this project.

astro-ph.IM↗