arXiv subjects

Adam Snyder

Publications and source records attributed to Adam Snyder.

10 recordsLinked to original sources

arXiv2026

The On-Sky Performance of the LSST Camera CCD Array

The focal plane of the LSST Camera contains 189 individual science CCDs, arranged into 21 raft tower modules, along with 4 wavefront and 8 guider CCDs located in 4 additional corner RTMs. Altogether, the LSST Camera CCDs compose the largest focal plane ever constructed. The LSST Camera is the primary instrument of Rubin Observatory, which will begin the Legacy Survey of Space and Time in 2026. In this paper, we describe the on-sky performance of the LSST Camera CCDs, from receipt at NSF/DOE Vera C. Rubin Observatory in May 2024 to on-sky observations during the first year of operations. We discuss the process to establish functionality of several CCDs which were affected by an electrical short and faulty analog-digital converter, optimizations of readout timing in response to changes in the survey strategy, and implementation of enhanced focal plane safety measures through an active clearing mechanism on the CCDs. Finally, we discuss sensor features observed on-sky, and global performance during the first year of operations. The operations to date of the LSST Camera CCDs have demonstrated the capability of performing a wide, fast, and deep optical imaging survey of the entire southern sky at the Rubin Observatory.

astro-ph.IM↗

arXiv2025

Report on LEO satellite impacts on ground-based optical astronomy for the Rubin Observatory LSST

In August 2025 a workshop was convened to bring together experts to better understand steps that can be taken to mitigate the impact of satellite constellations on astronomical observations. At the time, just over 12,000 operational satellites were in low-Earth orbit (LEO). Although reflected sunlight and emissions all across the electromagnetic spectrum from artificial satellites impact scientific observations and the sky, the workshop focused on reflected sunlight in the wavelength range 330 nm to 1100 nm. This aligns with the Vera C. Rubin Observatory Legacy Survey of Space and Time (LSST) planned imaging observations over the coming decade. Among other conclusions, we affirm previous recommendations that tracked satellite apparent magnitudes should be no brighter than 7th AB mag. The workshop participants discussed over 30 publications, reports, and presentations, and arrived at the Findings and Recommendations presented here. During the workshop, in addition to affirming many existing recommendations and best practices, the group discovered new issues and devised possible mitigations. These were nearly equally divided between advice to satellite builders and operators and to the observational astronomy community. While the workshop prioritized considerations for LSST, our hope is that many of the Findings and Recommendations will also apply to other observatories and constellations, and that all satellite companies will continue to engage in dialog with sky observers across the globe.

astro-ph.IM↗

arXiv2025

Satellite Streak Brightness Variation with Orbit Height

We study the apparent optical brightness of satellite streaks in ground-based observatory cameras as the orbit height is varied. This is done via simulations. Several factors are in play: the range to the satellite, satellite size and geometry, the diameter of the telescope aperture, and the angular velocity of the satellite image as it streaks across the camera's focal plane. For a large telescope aperture, a satellite in a lower orbit becomes out-of-focus in a camera focused at infinity. In the case of Rubin Observatory's LSSTCam, we find that these factors nearly cancel as a large satellite is moved from an orbit at 550 km down to 350 km.

astro-ph.IM↗

arXiv2025

Characterization of Residual Charge Images in LSST Camera e2v CCDs

LSST Camera CCDs produced by the manufacturer e2v exhibit strong and novel residual charge images when exposed to bright sources. These manifest in images following bright exposures both in the same pixel areas as the bright source, and in the pixels trailing between the source and the serial register. Both of these pose systematic challenges to the Rubin Observatory Legacy Survey of Space and Time instrument signature removal. The latter trail region is especially impactful as it affects a much larger pixel area in a less well defined position. In our study of this effect at UC Davis, we imaged bright spots to characterize these residual charge effects. We find a strong dependence of the residual charge on the parallel clocking scheme, including the relative levels of the clocking voltages, and the timing of gate phase transition during the parallel transfer. Our study points to independent causes of residual charge in the bright spot region and trail region. We propose potential causes in both regions and suggest methodologies for minimizing residual charge. We consider the trade-offs to these methods including decreasing the camera's full well and dynamic range at the high end. Some of these results and suggestions have been reviewed by the camera commissioning team and may result in changes made to the clocking voltage scheme on the LSST Camera.

astro-ph.IM↗

arXiv2024

Expected Impact of Glints from Space Debris in the LSST

We examine the simple model put forth in a recent note by Loeb regarding the brightness of space debris in the size range of 1-10 cm and their impact on the Rubin Observatory Legacy Survey of Space and Time (LSST) transient object searches. Their main conclusion was that "image contamination by untracked space debris might pose a bigger challenge [than large commercial satellite constellations in LEO]". Following corrections and improvements to this model, we calculate the apparent brightness of tumbling low-Earth orbit (LEO) debris of various sizes, and we briefly discuss the likely impact and potential mitigations of glints from space debris in LSST. We find the majority of the difference in predicted signal-to-noise ratio (S/N), about a factor of 6, arises from the defocus of LEO objects due to the large Simonyi Survey Telescope primary mirror and finite range of the debris. The largest change from the Loeb estimates is that 1-10 cm debris in LEO pose no threat to LSST transient object alert generation because their S/N for detection will be much lower than estimated by Loeb due to defocus. We find that only tumbling LEO debris larger than 10 cm or with significantly greater reflectivity, which give 1 ms glints, might be detected with high confidence (S/N > 5). We estimate that only one in five LSST exposures low on the sky during twilight might be affected. More slowly tumbling objects of larger size can give flares in brightness that are easily detected; however, these will not be cataloged by the LSST Science Pipelines because of the resulting long streak.

astro-ph.IM↗

arXiv2023

Mitigation of the Brighter-Fatter Effect in the LSST Camera

Thick, fully depleted charge-coupled devices (CCDs) are known to exhibit non-linear behavior at high signal levels due to the dynamic behavior of charges collecting in the potential wells of pixels, called the brighter-fatter effect (BFE). This particularly impacts bright calibration stars, which appear larger than their intrinsic shape, creating a flux-dependent point-spread function (PSF) that if left unmitigated, could make up a large fraction of the error budget in Stage IV weak-lensing (WL) surveys such as the Legacy Survey of Space and Time (LSST). In this paper, we analyze image measurements of flat fields and artificial stars taken at different illumination levels with the LSST Camera (LSSTCam) at SLAC National Accelerator Laboratory in order to quantify this effect in the LSST Camera before and after a previously introduced correction technique. We observe that the BFE evolves anisotropically as a function of flux due to higher-order BFEs, which violates the fundamental assumption of this correction method. We then introduce a new sampling method based on a physically motivated model to account these higher-order terms in the correction, and then we test the modified correction on both datasets. We find that the new method corrects the effect in flat fields better than it corrects the effect in artificial stars which we conclude is the result of a unmodeled curl component of the deflection field by the correction. We use these results to define a new metric for the full-well capacity of our sensors and advise image processing strategies to further limit the impact of the effect on LSST WL science pathways.

astro-ph.IM↗

arXiv2023

Photometry, Centroid and Point-Spread Function Measurements in the LSST Camera Focal Plane Using Artificial Stars

The Vera C. Rubin Observatory's LSST Camera (LSSTCam) pixel response has been characterized using laboratory measurements with a grid of artificial stars. We quantify the contributions to photometry, centroid, point-spread function size, and shape measurement errors due to small anomalies in the LSSTCam CCDs. The main sources of those anomalies are quantum efficiency variations and pixel area variations induced by the amplifier segmentation boundaries and "tree-rings" - circular variations in silicon doping concentration. This laboratory study using artificial stars projected on the sensors shows overall small effects. The residual effects on point-spread function (PSF) size and shape are below $0.1\%$, meeting the ten-year LSST survey science requirements. However, the CCD mid-line presents distortions that can have a moderate impact on PSF measurements. This feature can be avoided by masking the affected regions. Effects of tree-rings are observed on centroids and PSFs of the artificial stars and the nature of the effect is confirmed by a study of the flat-field response. Nevertheless, further studies of the full-focal plane with stellar data should more completely probe variations and might reveal new features, e.g. wavelength-dependent effects. The results of this study can be used as a guide for the on-sky operation of LSSTCam.

astro-ph.IM↗

arXiv2020

MAORY AO performances

The Multi-conjugate Adaptive Optics RelaY (MAORY) should provide 30% SR in K band (50% goal) on half of the sky at the South Galactic Pole. Assessing its performance and the sensitivity to parameter variations during the design phase is a fundamental step for the engineering of such a complex system. This step, centered on numerical simulations, is the connection between the performance requirements and the Adaptive Optics system configuration. In this work we present MAORY configuration and performance and we justify theAdaptive Optics system design choices.

astro-ph.IM↗

arXiv2020

Investigation of Deferred Charge Effects in LSST ITL Sensors

The traditional characterization of charge transfer inefficiency (CTI) in charge-coupled devices (CCDs) can suffer from a number of deficiencies: CTI is often only calculated for a limited number of signal levels, CTI is calculated from a limited number of pixels, and the sources of CTI are usually assumed to occur at every pixel-to-pixel transfer. A number of serial CTI effects have been identified during preliminary testing of CCDs developed by Imaging Technology Laboratory (ITL) for use in the Large Synoptic Survey Telescope (LSST) camera focal plane that motivate additional study beyond the traditional CTI characterization. This study describes a more detailed examination of the serial deferred charge effects in order to fully characterize the deferred charge measured in the serial overscan pixels of these sensors. The results indicate that in addition to proportional CTI loss that occurs at each pixel transfer, ITL CCDs have additional contributions to the deferred charge measured in serial overscan pixels, likely caused by fixed CTI loss due to charge trapping, and an electronic offset drift at high signal.

astro-ph.IM↗

arXiv2014

Measurement of the absolute Quantum Efficiency of Hamamatsu model R11410-10 photomultiplier tubes at low temperatures down to liquid xenon boiling point

We report on the measurements of the absolute Quantum Efficiency(QE) for Hamamatsu model R11410-10 PMTs specially designed for the use in low background liquid xenon detectors. QE was measured for five PMTs in a spectral range between 154.5 nm to 400 nm at low temperatures down to -110$^0$C. It was shown that during the PMT cooldown from room temperature to -110 $^0$C (a typical PMT operation temperature in liquid xenon detectors), the absolute QE increases by a factor of 1.1 - 1.15 at 175 nm. The QE growth rate with respect to temperature is wavelength dependent peaking at about 165 nm corresponding to the fastest growth of about -0.07 %QE/$^{0}C$ and at about 200 nm corresponding to slowest growth of below -0.01 %QE/$^{0}C$. A dedicated setup and methods for PMT Quantum Efficiency measurement at low temperatures are described in details.

astro-ph.IM↗