arXiv subjects

Adam Mate

Publications and source records attributed to Adam Mate.

18 recordsLinked to original sources

arXiv2026

Impact of Inverter-Based Resources on the Protection of the Electrical Grid

In recent years, the contribution of renewable energy resources to the electrical grid has increased drastically; the most common of these are photovoltaic solar panels and wind turbines. These resources rely on inverters to interface with the grid, which do not inherently exhibit the same fault characteristics as synchronous generators. Consistently, they can strain grid reliability and security, cause increased number of blackouts, and, in some cases, allow relatively minor faults to turn into cascading failures. Solar and wind energy provide benefits and can support grid stability; however, several challenges and gaps in understanding must be explored and addressed before this can be realized. This paper provides a comprehensive literature review of grid codes, modeling techniques, and tools, as well as current methods for responding to various faults. It also presents an overview of the industry's state as it relates to grid fault response in the presence of inverter-based resources.

eess.SY↗

arXiv2025

Sensitivity of DC Network Representation for GIC Analysis

Geomagnetic disturbances are a threat to the reliability and security of our national critical energy infrastructures. These events specifically result in geomagnetically induced currents, which can cause damage to transformers due to magnetic saturation. In order to mitigate these effects, blocker devices must be placed in optimal locations. Finding this placement requires a dc representation of the ac transmission lines, which this paper discusses. Different decisions in this process, including the method of representing the blocking devices, result in significant variations to the power loss calculations. To analyze these effects, we conclude the paper by comparing the losses on a sample network with different modeling implementations.

eess.SY↗

arXiv2024

Physics-Informed Heterogeneous Graph Neural Networks for DC Blocker Placement

The threat of geomagnetic disturbances (GMDs) to the reliable operation of the bulk energy system has spurred the development of effective strategies for mitigating their impacts. One such approach involves placing transformer neutral blocking devices, which interrupt the path of geomagnetically induced currents (GICs) to limit their impact. The high cost of these devices and the sparsity of transformers that experience high GICs during GMD events, however, calls for a sparse placement strategy that involves high computational cost. To address this challenge, we developed a physics-informed heterogeneous graph neural network (PIHGNN) for solving the graph-based dc-blocker placement problem. Our approach combines a heterogeneous graph neural network (HGNN) with a physics-informed neural network (PINN) to capture the diverse types of nodes and edges in ac/dc networks and incorporates the physical laws of the power grid. We train the PIHGNN model using a surrogate power flow model and validate it using case studies. Results demonstrate that PIHGNN can effectively and efficiently support the deployment of GIC dc-current blockers, ensuring the continued supply of electricity to meet societal demands. Our approach has the potential to contribute to the development of more reliable and resilient power grids capable of withstanding the growing threat that GMDs pose.

eess.SY↗

arXiv2024

A Review of the GIC Blocker Placement Problem

Space weather poses a tremendous threat to power systems: geomagnetic disturbances could result in widespread disruptions and long-duration blackouts, including severe damage to system components. To mitigate their impacts, a handful of strategies exist, with the most promising being the deployment of transformer neutral blocking devices. The high cost of these devices, however, precludes their installation at all substations; this motivates the development of effective solutions for the cost-effective placement of such devices. While the current state-of-the-art in blocker placement methods is insufficient to be applied to real-sized power grids, ongoing research continues to increase the size of networks for which the placement problem remains tractable. Along these lines, the contributions of this paper are two fold: first, a comprehensive overview of the current state-of-the-art in blocker placement methods is provided; and second, a complete optimization formulation - implemented and benchmarked in an open-source software - for the blocker placement problem is presented.

eess.SY↗

arXiv2023

Heuristic Algorithms for Placing Geomagnetically Induced Current Blocking Devices

We propose a new heuristic approach for solving the challenge of determining optimal placements for geomagnetically induced current blocking devices on electrical grids. Traditionally, these determinations are approached by formulating the problem as mixed-integer nonlinear programming models and solving them using optimization solvers based on the spatial branch-and-bound algorithm.However, computing an optimal solution using the solvers often demands substantial computational time due to their inability to leverage the inherent problem structure. Therefore, in this work we propose a new heuristic approach based on a three-block alternating direction method of multipliers algorithm, and we compare it with an existing stochastic learning algorithm. Both heuristics exploit the structure of the problem of interest. We test these heuristic approaches through extensive numerical experiments conducted on the EPRI-21 and UIUC-150 test systems. The outcomes showcase the superior performance of our methodologies in terms of both solution quality and computational speed when compared with conventional solvers.

math.OC↗

arXiv2023

Developing Optimization-Based Inverter Models for Short Circuit Studies

As inverter-based generation becomes more common in distribution networks, it is important to create models for use in optimization-based problems that accurately represent their non-linear behavior when saturated. This work presents models for grid-following and grid-forming inverters, and demonstrates their use in optimization-based fault studies. The developed models are shown to provide results in line with experimental tests from literature; however, grid-forming inverter models fail to provide feasible solutions for certain fault types even when currents, voltages, and powers from the models seem reasonable. This work lays down the foundation for the development of relaxed models for both grid-following and grid-forming inverter models for use in optimization problems.

eess.SY↗

arXiv2023

Real-Time Implementation of Dynamic State Estimation for Microgrid Load Bus Protection

Inverter-interfaced microgrids, owing to the lack of fault current, cannot be protected using traditional over-current protections, while admittance or differential relaying protection schemes are not practical to be implemented. Dynamic state estimation can track and predict power system transients and has been extensively investigated for setting-less protection. A novel real-time application of dynamic state estimation for protection is proposed in this paper, wherein parameter estimation and parallel processing is used to identify the state of the system. The implementation scheme has low process complexity and employs a data acquisition device and estimator that run on a general-purpose computer. This proposed implementation extends the state-of-the-art, under short-circuit conditions, to a real-time implementation with a lumped-load radial microgrid and a grid-forming inverter with current-limiting behavior.

eess.SY↗

arXiv2023

Measuring and Analyzing Effects of HEMP Simulation on Synthetic Power Grids

There is significant uncertainty about the potential effects of a high-altitude electromagnetic pulse (HEMP) detonation on the bulk electric system. This study attempts to account for such uncertainty, in using Monte-Carlo methods to account for speculated range of effect of HEMP contingency. Through task parallelism and asynchronous processing techniques implemented throughout simulation, this study measure the effects of 700 large-scale HEMP simulations on a 7173 bus synthetic power grid. Analysis explores how contingency severity varies, depending on initial contingency parameters. Severity indices were captured throughout simulation to measure and quantify the cascading nature of an HEMP event. Further development of HEMP simulation modeling is explored as well, which could augment forecasts of potential contingency events as well.

eess.SY↗

arXiv2022

Fault Current-Constrained Optimal Power Flow on Unbalanced Distribution Networks

With the proliferation of distributed generation into distribution networks, the need to consider fault currents in the dispatch problem becomes increasingly relevant. This paper introduces a method for adding fault current constraints into optimal power flow in order to reduce fault currents while minimizing generation cost. The optimal power flow problem is formulated as a single optimization problem with sub-networks representing the faults of interest. Having a single optimization problem allows the decision variables to be coupled across the optimal power flow and the fault current studies without having to iterate over possible solutions. The proposed method is applicable to unbalanced distribution networks, including those with transformers that introduce phase-shifts.

eess.SY↗

arXiv2022

Dynamic State Estimation-Based Protection for Induction Motor Loads

Ensuring protective device coordination is critical to maintain the resilience and improve the reliability of large microgrids. Inverter-interfaced generation, however, poses significant challenges when designing protection systems. Traditional time-overcurrent protective devices are unsuitable on account of the lack of fault current. Present industry practice is to force all inverters to shut down during faults, which prevents large microgrids from operating in a resilient and reliable manner. Dynamic state estimation (DSE) has been proposed for line protection, and more recently for the protection of load buses or downstream radial portions of microgrids. However, only passive loads with series resistive-inductive loads have been tested with DSE, even though the behavior of dynamic loads -- such as induction motors or power electronics -- may differ significantly during faults. This paper considers the case of applying DSE to protecting a load bus serving a three-phase induction motor.

eess.SY↗

arXiv2022

Dynamic State Estimation for Load Bus Protection on Inverter-Interfaced Microgrids

Inverter-interfaced microgrids results in challenges when designing protection systems. Traditional time-overcurrent, admittance, and differential protection methods are unsuitable on account of lack of fault current, excessively short lines, or a prohibitive number of protective devices needing to be installed. Current practice is to force all inverters to shut down during fault conditions, weakening resilience and reducing reliability. Dynamic state estimation (DSE), which has been explored for both line protection and load bus protection before, is a potential solution to these challenges to create widely utilizable, highly reliable protection systems. However, it has only been tested for load protection with ideal voltage sources, which do not capture the short-circuit behavior of inverter-interfaced generation, notably low fault current and unbalanced output voltage. This paper aims to extend the state-of-the-art on DSE load protection: the performance of DSE during short-circuit conditions with a grid-forming inverter with current-limiting behavior during fault conditions is investigated.

eess.SY↗

arXiv2021

Relaxation Based Modeling of GMD Induced Cascading Failures in PowerModelsGMD.jl

A major risk of geomagnetic disturbances (GMDs) is cascading failure of electrical grids. The modeling of GMD events and cascading outages in power systems is difficult, both independently and jointly, because of the many different mechanisms and physics involved. This paper introduces a relaxation based modeling of GMD-induced cascading failures:~the dc approximation-based DCSIMSEP solver was adapted to simulate cascading as a result of GMDs, the full set of ac power flow equations were relaxed to guarantee optimality, and the reactive power losses were modeled while keeping the problem convex. The developed algorithm was implemented in PowerModelsGMD.jl - an open-source software specifically designed to model and analyze geomagnetic hazards - and demonstrated to work on the RTS-GMLC-GIC-EAST synthetic test network.

eess.SY↗

arXiv2021

The Risk of Hidden Failures to the United States Electrical Grid and Potential for Mitigation

Hidden failures present a noticeable impact to the reliability of the United States electrical grid. These hazards are responsible for protective device misoperations and can cause multiple-element contingencies across nearby components, greatly increasing the likelihood of cascading events. This paper provides an in-depth overview of the causes and risks of hidden failures and discusses methods for identifying critical locations where hidden failures could pose a risk of cascading failure, with the ultimate goal being to identify efficient mitigation methods that can prevent their occurrence in protective relays.

eess.SY↗

arXiv2021

Impacts of Earthquakes on Electrical Grid Resilience

One of the most complex and devastating disaster scenarios that the U.S.~Pacific Northwest region and the state of Oregon faces is a large magnitude Cascadia Subduction Zone earthquake event. The region's electrical grid lacks in resilience against the destruction of a megathrust earthquake, a powerful tsunami, hundreds of aftershocks and increased volcanic activity, all of which are highly probable components of this hazard. This research seeks to catalyze further understanding and improvement of resilience. By systematizing power system related experiences of historical earthquakes, and collecting practical and innovative ideas from other regions on how to enhance network design, construction, and operation, important steps are being taken toward a more resilient, earthquake-resistant grid. This paper presents relevant findings in an effort to be an overview and a useful guideline for those who are also working towards greater electrical grid resilience.

eess.SY↗

arXiv2021

Implementing Admittance Relaying for Microgrid Protection

The rapid increase of distributed energy resources has led to the widespread deployment of microgrids. These flexible and efficient local energy grids are able to operate in both grid-connected mode and islanded mode; they are interfaced to the main power system by a fast semiconductor switch and commonly make use of inverter-interfaced generation. This paper focuses on inverter interfaced microgrids, which present a challenge for protection as they do not provide the high short-circuit current necessary for conventional time-overcurrent protection. The application of admittance relaying for the protection of inverter-interfaced microgrids is investigated as a potential solution. The comparison of analytical and simulated results of performed four experiments prove the suitability of admittance relaying for microgrids protection.

eess.SY↗

arXiv2021

Dynamic State Estimation for Radial Microgrid Protection

Microgrids are localized electrical grids with control capability that are able to disconnect from the traditional grid to operate autonomously. They strengthen grid resilience, help mitigate grid disturbances, and support a flexible grid by enabling the integration of distributed energy resources. Given the likely presence of critical loads, the proper protection of microgrids is of vital importance; however, this is complicated in the case of inverter-interfaced microgrids where low fault currents preclude the use of conventional time-overcurrent protection. This paper introduces and investigates the application of dynamic state estimation, a generalization of differential protection, for the protection of radial portions of microgrids (or distribution networks); both phasor-based and dynamic approaches are investigated for protection. It is demonstrated through experiments on three case-study systems that dynamic state estimation is capable of correctly identifying model parameters for both normal and faulted operation.

eess.SY↗

arXiv2021

Rapid Method for Generation Prioritization during System Restoration with Renewable Resources

Quick and reliable power system restoration is critically important after natural disasters or other sudden threats, such as cyber-attacks. Leveraging renewable resources in system restoration shortens recovery times, resulting in prevented life-loss and avoided economic-loss, and improves the resilience of the entire grid. However, it is not a common practice today; the inherent variability of these resources represents a challenge for a streamlined restoration process. This paper presents a prioritized method - starting with renewable generator units then lowering priority to conventional units - to plan the operational schedule of a power system during the restoration process. The goal is to achieve a well balanced system in the presence of significant renewable penetration. Validation and benchmarking experiments were performed on a customized version of the RTS-GMLC test system using six months out of year-long data, tested through hourly simulations. After evaluating the performance and computational costs, this method proved faster than common approaches: a MILP Unit Commitment algorithm, widely used today, and an "enable-and-try" algorithm. In summary, herein a more convenient method is provided to be utilized during time-sensitive restoration, as an online operation-planning aid.

eess.SY↗

arXiv2021

Analyzing and Mitigating the Impacts of GMD and EMP Events on the Electrical Grid with PowerModelsGMD.jl

Geomagnetic disturbances and E3 high-altitude electromagnetic pulse events pose a substantial threat to the electrical grid by adversely impacting and damaging high-voltage transmission networks and equipment. To evaluate the risks and mitigate the potential effects of these hazards, this work proposes PowerModelsGMD.jl (abbr. PMsGMD). PMsGMD is an open-source Julia package that solves for quasi-dc line flow and ac power flow problems in a system subjected to geomagnetically induced currents. Unlike commercially available software solutions, it is extensible and applicable to a variety of problems. The flexibility of this framework is demonstrated by applying it to the problem of identifying mitigation strategies via line switching for a time-extended transformer heating problem. An overview of PMsGMD is presented in this paper: introduction to its design, validation of its implementation, demonstration of its performance and effectiveness, and a description of how it may be applied to aid system-operation decisions.

eess.SY↗