arXiv Science⌕ Search

arXiv subjects

A. Sytov

Publications and source records attributed to A. Sytov.

At least 19 recordsLinked to original sources

Evidence for MeV Radiation from a Large-Amplitude Crystalline Undulator

We report evidence for MeV radiation from a large-amplitude crystalline undulator in which 35 GeV/c positrons channel along periodically bent Si(110) planes. Si$_3$N$_4$ stressors produce ten periods with $λ_u = 334~μ$m and midplane amplitude $A_u \simeq 1.85$ nm (XRD-validated modeling). Under planar alignment, the energy-loss spectrum shows an excess over the misaligned case peaking at $6.8 \pm 0.3$ MeV ($4.05σ$), in agreement with simulations and the 7.2 MeV analytical estimate. Simulations for 20 GeV FCC-ee injector positrons predict a peak brilliance of $1.8\times10^{21}$ photons/(s mm$^2$ mrad$^2$ 0.1% BW).

physics.acc-ph↗

Bayesian optimization of longitudinally aligned CNT targets for 800 nm laser wakefield acceleration in the bubble regime

Laser wakefield acceleration (LWFA) in solid-density plasmas can reach accelerating gradients in the TeV/m range, well above those of gaseous media, provided the driver is matched to the plasma. In nanostructured solids, this matching can be achieved by controlling the spacing between the nanostructures to reduce the effective density, enabling infrared pulses to excite wakefields in the bubble regime. Following numerical demonstrations with carbon nanotube (CNT) bundles on concentric cylindrical shells, a simpler, experimentally more accessible longitudinally aligned CNT (LA-CNT) target is investigated here, with the bundles on a triangular lattice within a square cross section and an optional central aperture. Three-dimensional particle-in-cell simulations are coupled with Bayesian optimization to vary the effective density, target length, bundle radius and aperture radius for a fixed 100 mJ, few-cycle, 800 nm laser pulse, maximizing the laser-to-beam energy conversion efficiency for electrons above 20 MeV. With the aperture radius constrained to at least 0.5 $μ$m, the best target operates in the bubble regime and reaches an efficiency of 24.6%, delivering a 673 pC bunch with a mean energy of 36.6 MeV and a quasi-monoenergetic peak near 46 MeV, against 19% for the concentric-shell target under identical conditions. When the aperture is allowed to vanish, the optimization converges to denser and shorter targets, the efficiency peaks at 25.8%, and the best configurations deliver a higher charge at the cost of a lower peak energy and about 50% larger divergence; aperture-free targets among them retain a mean efficiency of 24.1%. The optimized targets are robust to random bundle displacements that preserve the effective density. By eliminating the need to pattern a micrometre-scale opening, aperture-free targets may facilitate proof-of-principle experiments on solid-state LWFA.

physics.plasm-ph↗

From Simulation to Fabrication: Realizing Silicon Crystalline Undulators with Silicon Nitride Stressor Layer Patterning

A crystalline undulator is a crystal exhibiting periodic deformations that cause channeled particles to oscillate, generating coherent electromagnetic waves. In this study, stressor layer patterning has been employed to induce the desired deformations on a silicon substrate. Finite element method simulations were performed to optimize the geometric parameters of the undulator. The primary focus was on achieving sinusoidal deformation with sub-millimeter period and amplitude exceeding 1~nm, utilizing the silicon (110) plane for its superior channeling properties. Key parameters, such as substrate thickness and undulator period, were meticulously refined to ensure uniform deformation while minimizing the impact of higher harmonics, which could degrade performance. Based on the simulation results, a crystalline undulator, 160 $μ$m thick and consisting of 10 periods with a period length of 334 $μ$m, has been successfully fabricated. The final device demonstrates structural integrity and a uniform deformation extending up to 20 $μ$m from the surface. Specifically designed for use with 5-30 GeV particle beams, the undulator is capable of generating gamma photons in the 5-15 MeV range. This work effectively integrates advanced simulation techniques with precise fabrication methods, demonstrating the feasibility of crystalline undulators as high-performance devices for generating gamma radiation.

physics.acc-ph↗

High-Intense Gamma-Ray Emission from a Crystalline Undulator with Realistic Bending Profiles

The development of compact and intense $γ$-ray sources in the MeV energy range remains a significant frontier in radiation physics, with profound implications for nuclear physics, medicine and applied science. In this work, we present a comprehensive numerical investigation of the photon emission probability and brilliance of a Crystalline Undulator (CU) based on a periodically bent Si(110) crystal. Our approach integrates realistic deformation profiles obtained via Finite Element Method simulations of a realistic sample, where bending is induced by patterned Si$_3$N$_4$ surface stressors. Relativistic molecular dynamics simulations, performed using the MBN Explorer software package, consider a 10 GeV positron beam consistent with the foreseen FACET-II facility specifications. Our results reveal a distinct undulator radiation peak in the 1.6-2.1 MeV range, well-separated from the broader channeling radiation background. We show that for an optimal aperture angle of $1/2γ$, the source reaches a maximum peak brilliance of about $5\times10^{22}$~photons/s/mm$^2$/mrad$^2$/0.1\%~BW. This performance is highly competitive with large-scale Gamma-Beam Systems and exceeds that of Inverse-Compton Scattering sources, confirming the potential of crystalline undulators as high-brilliance, compact light sources for the MeV domain.

physics.acc-ph↗

Beam Steering and Radiation Generation of Electrons in Bent Crystals in the Sub-GeV Domain

We present an investigation into beam steering and radiation emission by sub-GeV electrons traversing bent silicon crystals. Using 855, 600, and 300~MeV electron beams at the Mainz Microtron (MAMI), we explored orientational coherent effects and particle dynamics in a 15~$μ$m-thick crystal bent along the (111) planes. Combined experimental and simulation analyses enabled the classification and quantitative assessment of the contributions from channeling, dechanneling, rechanneling, and volume capture to both beam deflection and radiation emission. Crystal steering remained effective even at 300~MeV, with measured channeling efficiencies exceeding 50\%, a record at such low energy. Channeling and volume reflection enhanced radiation emission by up to a factor of six compared to the misaligned orientation, highlighting strong orientational coherence effects in the sub-GeV regime. These findings confirm the feasibility of using bent crystals for efficient beam manipulation and high-intensity photon generation at low energies, supporting the development of novel light sources and beam control strategies at accelerator facilities operating in this energy range.

physics.acc-ph↗

Simulation model of crystal-based beam extraction using BDSim toolkit enhanced with Geant4 G4ChannelingFastSimModel

We present a simulation model for crystal-based beam extraction of lepton beams from an accelerator by using a bent crystal. This model utilizes the BDSim toolkit for particle dynamics in an accelerator in conjunction with the Geant4 G4ChannelingFastSimModel for beam deflection in a bent crystal and G4BaierKatkov for radiation losses. In order to link these codes, we designed a new BDSim accelerator component - a bent crystal compatible with G4ChannelingFastSimModel. As a demonstration, we constructed a complete simulation model of the DESY II Booster Synchrotron within BDSim, incorporating all relevant accelerator components and apertures. The model accounts for betatron and synchrotron oscillations, as well as radiation losses in an oriented crystal, using the Baier-Katkov radiation integral. Simulation results demonstrate the extraction of a primary monoenergetic 6 GeV electron beam, characterized by a charge of 23 pC, a horizontal beam emittance of 3.6 $μ$m$\cdot$rad, a vertical beam emittance of 0.32 $μ$m$\cdot$rad, and an energy spread of 0.008. Under the simulated conditions, (1.42 $\pm$ 0.02 %) of the initial circulating beam reaches the septum entrance. This corresponds to an extraction efficiency of (28.1 $\pm$ 0.4 %) when evaluated relative to the particles intercepted by the bent crystal. The approach provides a powerful tool to significantly accelerate R\&D for applications related to crystal-based extraction and collimation in lepton accelerators and colliders.

physics.acc-ph↗

Investigation of Radiation Emitted by Sub GeV Electrons in Oriented Scintillator Crystals

The research investigates coherent interactions between sub-GeV electrons and oriented scintillator crystals, leading to enhanced electromagnetic (EM) radiation. Experiments at Mainz Mikrotron (MAMI) involved PWO, BGO, and CsI crystals oriented along $\langle100\rangle$, $\langle111\rangle$, and $\langle100\rangle$ axes. Enhanced radiation emission was observed when the beam aligned with crystal axes, especially in BGO and CsI for the first time. These findings are crucial for innovative detectors using oriented crystal scintillators, amplifying EM processes along specific crystallographic directions. Potential applications include ultra-compact, highly sensitive electromagnetic calorimeters for high-energy physics and astroparticles, as well as high-performance gamma detectors for nuclear physics and medical imaging.

hep-ex↗

Observation of Fine Structure in Channeling of Particles in Bent Crystals

We observed highly efficient manipulation of the 530 MeV positron beam at Mainz Microtron via bent crystals. The low beam divergence revealed a fine structure in the angular distribution of channeled particles. A compact analytical model, supported by Monte Carlo including multiple scattering, accounts for the measurements. We established a criterion for designing a crystal with reduced angular spread of channeled particles for beam manipulation at any energy. This finding is particularly useful in view of applications of channeling to the highest energies.

physics.acc-ph↗

R&D on a high-performance electromagnetic calorimeter based on oriented crystalline scintillators

Although inorganic scintillators are widely used in the design of electromagnetic calorimeters for high-energy physics and astrophysics, their crystalline nature and, hence, their lattice orientation are generally neglected in the detector design. However, in general, the features of the electromagnetic field experienced by the particles impinging on a crystal at a small angle with respect to a lattice axis affect their interaction mechanisms. In particular, in case of electrons/photons of $\mathcal{O} (10~\mathrm{GeV})$ or higher impinging on a high-$Z$ crystal at an angle of $\lesssim 1~\mathrm{mrad}$, the so-called strong field regime is attained: the bremsstrahlung and pair production cross sections are enhanced with respect to the case of amorphous or randomly oriented materials. Overall, the increase of these processes leads to an acceleration of the electromagnetic shower development. These effects are thoroughly investigated by the OREO (ORiEnted calOrimeter) team, and pave the way to the development of innovative calorimeters with a higher energy resolution, a higher efficiency in photon detection and an improved particle identification capabilities due to the relative boost of the electromagnetic interactions with respect to the hadronic ones. Moreover, a detector with the same resolution as the current state of the art and reduced thickness could be developed. An overview of the lattice effects at the foundation of the shower boost and of the current status of the development of an operational calorimeter prototype are presented. This concept could prove pivotal for both accelerator fixed-target experiments and satellite-borne $γ$-ray observatories.

physics.ins-det↗

A highly-compact and ultra-fast homogeneous electromagnetic calorimeter based on oriented lead tungstate crystals

Progress in high-energy physics has been closely tied to the development of highperformance electromagnetic calorimeters. Recent experiments have demonstrated the possibility to significantly accelerate the development of electromagnetic showers inside scintillating crystals typically used in homogeneous calorimeters based on scintillating crystals when the incident beam is aligned with a crystallographic axis to within a few mrad. In particular, a reduction of the radiation length has been measured when ultrarelativistic electron and photon beams were incident on a high-Z scintillator crystal along one of its main axes. Here, we propose the possibility to exploit this physical effect for the design of a new type of compact e.m. calorimeter, based on oriented ultrafast lead tungstate (PWO-UF) crystals, with a significant reduction in the depth needed to contain electromagnetic showers produced by high-energy particles with respect to the state-of-the-art. We report results from tests of the crystallographic quality of PWO-UF samples via high-resolution X-ray diffraction and photoelastic analysis. We then describe a proof-of-concept calorimeter geometry defined with a Geant4 model including the shower development in oriented crystals. Finally, we discuss the experimental techniques needed for the realization of a matrix of scintillator crystals oriented along a specific crystallographic direction. Since the angular acceptance for e.m. shower acceleration depends little on the particle energy, while the decrease of the shower length remains pronounced at very high energy, an oriented crystal calorimeter will open the way for applications at the maximum energies achievable in current and future experiments. Such applications span from forward calorimeters, to compact beam dumps for the search for light dark matter, to source-pointing space-borne γ-ray telescopes.

physics.ins-det↗

Experimental Study of Rare Kaon Decays at J-PARC with KOTO and KOTO II

The rare kaon decay $K_L\toπ^0ν\barν$ is extremely sensitive to new physics, because the contribution to this decay in the Standard Model (SM) is highly suppressed and known very accurately; the branching ratio is $3\times 10^{-11}$ in the SM with a theoretical uncertainty of just 2%. The measurement of this branching ratio could provide essential new information about the flavor structure of the quark sector from the $s\to d$ transition. The decay is being searched for in the KOTO experiment at J-PARC, which has obtained the current best upper limit on the branching ratio of $2.2\times 10^{-9}$; a sensitivity to branching ratios below $10^{-10}$ is achievable by the end of the decade. A next-generation experiment at J-PARC, KOTO II, was proposed in 2024 with 82 members worldwide, including significant contributions from European members. The goal of KOTO II is to measure the $K_L\toπ^0ν\barν$ branching ratio with sensitivity below $10^{-12}$ in the 2030s. Discovery of the decay with $5σ$ significance is achievable at the SM value of the branching ratio. An indication of new physics with a significance of 90% is possible if the observed branching ratio differs by 40% from the SM value. Another important goal of KOTO II is to measure the branching ratio of the unobserved $K_L\to π^0e^+e^-$ decay, which can give an input to flavor structures of new physics. Other rare $K_L$ decays and hidden-sector particles are also in the scope of the study. After 2026, KOTO will be the only dedicated rare kaon decay experiment in the world, and KOTO II is the only future rare kaon decay project currently proposed. We would like to lead a global initiative for the experimental study of rare kaon decays, with significant contributions and support from the European community.

hep-ex↗

A Novel Tool for Advanced Analysis of Geant4 Simulations of Charged Particles Interactions in Oriented Crystals

We present a novel Python tool for the analysis of Geant4 simulations that enhances our understanding of coherent phenomena occurring during the interaction of charged particles with crystal planes. This tool compares the total energy of particles with the potential energy inside crystal channels, enabling a complete examination of coherent effects. By tracking the particle trajectory and classifying the dynamics at each simulation step, it provides deeper insights into how different phenomena contribute to both radiation and particle deflection. This tool can be used to improve crystal-based extraction methods and the development of gamma-ray sources using crystals.

cond-mat.mtrl-sci↗

Coherent radiation in axially oriented industrial-grade tungsten crystals: A viable path for an innovative γ-rays and positron sources

It is known that the alignment of an high-energy e- beam with specific crystal directions leads to a significant increase of the coherent radiation emission. This enhancement can be exploited to create an intense photon source. An elective application is an innovative positron source design for future lepton colliders. Such scheme takes advantage of lattice coherent effects by employing a high-Z crystalline radiator, followed by an amorphous metallic converter, to generate positrons via a two-step electromagnetic process. Additional applications can be in neutron production through photo-transmutation and radionuclide generation via photo-nuclear reactions. In this work, we present experimental results obtained from beam tests at CERN's PS facility using commercial industrial-grade tungsten crystals. The obtained results demonstrate the robust performance of industrial-grade radiators, even with their inherent imperfections, suggesting that it is possible to simplify the supply process and it is not strictly necessary to rely on highly specialized research infrastructures.

physics.acc-ph↗

Integration of Machine Learning-Based Plasma Acceleration Simulations into Geant4: A Case Study with the PALLAS Experiment

We present the development and integration of a Machine Learning (ML)-based surrogate model, trained on Particle-In-Cell (PIC) simulations of laser-driven plasma wakefield acceleration source of electrons, into Geant4 simulation toolkit. Our model enables the generation and tracking of plasma-accelerated beams within complete experimental setups, unifying plasma acceleration and Monte Carlo-based simulations, which significantly reduces their complexity and computational cost. Our implementation focuses on the PALLAS laser-plasma accelerator test facility, integrating its full experimental setup into Geant4. We describe the ML model, its integration into Geant4, and key simulation results, demonstrating the feasibility of start-to-end simulations of plasma acceleration facilities and applications within a unified framework.

physics.plasm-ph↗

Strong enhancement of electromagnetic shower development induced by high-energy photons in a thick oriented tungsten crystal

We have observed a significant enhancement in the energy deposition by $25$--$100~\mathrm{GeV}$ photons in a $1~\mathrm{cm}$ thick tungsten crystal oriented along its $\langle 111 \rangle$ lattice axes. At $100~\mathrm{GeV}$, this enhancement, with respect to the value observed without axial alignment, is more than twofold. This effect, together with the measured huge increase in secondary particle generation is ascribed to the acceleration of the electromagnetic shower development by the strong axial electric field. The experimental results have been critically compared with a newly developed Monte Carlo adapted for use with crystals of multi-$X_0$ thickness. The results presented in this paper may prove to be of significant interest for the development of high-performance photon absorbers and highly compact electromagnetic calorimeters and beam dumps for use at the energy and intensity frontiers.

hep-ex↗

HIKE, High Intensity Kaon Experiments at the CERN SPS

A timely and long-term programme of kaon decay measurements at a new level of precision is presented, leveraging the capabilities of the CERN Super Proton Synchrotron (SPS). The proposed programme is firmly anchored on the experience built up studying kaon decays at the SPS over the past four decades, and includes rare processes, CP violation, dark sectors, symmetry tests and other tests of the Standard Model. The experimental programme is based on a staged approach involving experiments with charged and neutral kaon beams, as well as operation in beam-dump mode. The various phases will rely on a common infrastructure and set of detectors.

hep-ex↗

A high-performance custom photodetection system to probe the light yield enhancement in oriented crystals

Scintillating homogeneous detectors represent the state of the art in electromagnetic calorimetry. Moreover, the currently neglected crystalline nature of the most common inorganic scintillators can be exploited to achieve an outstanding performance boost in terms of compactness and energy resolution. In fact, it was recently demonstrated by the AXIAL/ELIOT experiments that a strong reduction in the radiation length inside PWO, and a subsequent enhancement in the scintillation light emitted per unit thickness, are attained when the incident particle trajectory is aligned with a crystal axis within $\sim 1^\circ$. A SiPM-based system has been developed to directly probe this remarkable effect by measuring the scintillation light emitted by a PWO sample. The same concept could be applied to full-scale detectors that would feature a design significantly more compact than currently achievable and unparalleled resolution in the range of interest for present and future experiments.

physics.ins-det↗

Crystal-based pair production for a lepton collider positron source

An intense positron sources is a demanding element in the design of future lepton colliders. A crystal-based hybrid positron source could be an alternative to a more conventional scheme based on the electron conversion into positron in a thick amorphous target. The conceptual idea of the hybrid source is to have two separate objects, a photon radiator and a photon-to-positron converter target. In such a scheme an electron beam crosses a thin axially oriented crystal with the emission of a channeling radiation, characterized by a considerably larger amount of photons if compared to Bremsstrahlung. The net result is an increase in the number of produced positrons at the converter target. In this paper we present the results of a beam test conducted at the DESY TB 21 with 5.6 GeV electron beam and a crystalline tungsten radiator. Experimental data clearly highlight an increased production of photons and they are critically compared with the outcomes of novel method to simulate the number of radiated photons, showing a very good agreement. Strong of this, the developed simulation tool has been exploited to design a simple scheme for a positron source based on oriented crystal, demonstrating the advantages in terms of reduction of both deposited energy and the peak energy deposition density if compared to conventional sources. The presented work opens the way for a realistic and detailed design of a hybrid crystal-based positron source for future lepton colliders.

physics.acc-ph↗