arXiv subjects

A. Restelli

Publications and source records attributed to A. Restelli.

8 recordsLinked to original sources

arXiv2024

Quadrature amplitude modulation for electronic sideband Pound-Drever-Hall laser frequency locking

The Pound--Drever--Hall (PDH) technique is routinely used to stabilize the frequency of a laser to a reference cavity. Electronic sideband (ESB) locking, a PDH variant, bridges the frequency gap between the discrete cavity resonances and a desired laser frequency. Here we use quadrature amplitude modulation (QAM), a standard technique in digital communications, to generate the high-quality phase-modulated radio-frequency (rf) drive required for ESB locking. We develop a theoretical framework to analyze how in-phase/quadrature-phase (I/Q) impairments distort the ESB error signal and induce frequency offsets relevant to ultranarrow-linewidth lasers. We then design and implement a direct software-defined radio (SDR) on an UltraScale+ RFSoC platform, frequently adopted across modern quantum-computing systems, to digitally compensate QAM I/Q impairments. Using this device, we generate phase-modulated rf signals with a large phase-modulation index of $1.01$ rad and root-mean-square I/Q errors below $0.3\ \%$ over a carrier-frequency range of $350~\mathrm{MHz}$ to $1.75~\mathrm{GHz}$. Finally, we lock a laser to an ultralow expansion (ULE) reference cavity and demonstrate continuous laser-frequency tuning by ramping the carrier frequency while maintaining lock, validating the continuous tunability of our ESB locking instrument.

physics.optics↗

arXiv2021

Programmable System on Chip for controlling an atomic physics experiment

Most atomic physics experiments are controlled by a digital pattern generator used to synchronize all equipment by providing triggers and clocks. Recently, the availability of well-documented open-source development tools has lifted the barriers to using programmable systems on chip (PSoC), making them a convenient and versatile tool for synthesizing digital patterns. Here, we take advantage of these advancements in the design of a versatile clock and pattern generator using a PSoC. We present our design with the intent of highlighting the new possibilities that PSoCs have to offer in terms of flexibility. We provide a robust hardware carrier and basic firmware implementation that can be expanded and modified for other uses.

physics.ins-det↗

arXiv2020

A radiofrequency voltage-controlled current source for quantum spin manipulation

We present a design for a wide-bandwidth, voltage-controlled current source that is easily integrated with radiofrequency magnetic field coils. Our design uses current feedback to compensate for the frequency-dependent impedance of a radiofrequency antenna. We are able to deliver peak currents greater than 100 mA over a 300 kHz to 54 MHz frequency span. The radiofrequency current source fits onto a printed circuit board smaller than $4~\text{cm}^2$ and consumes less than 1.3 W of power. It is suitable for use in deployable quantum sensors and nuclear-magnetic-resonance systems.

physics.ins-det↗

arXiv2019

A flexible, open-source radio-frequency driver for acousto-optic and electro-optic devices

We present a design for a radio-frequency driver that leverages telecom amplifiers to achieve high power output and wide bandwidth. The design consists of two compact printed circuit boards (total area $< 255$ cm), which incorporate power (turn-on) and thermal management to prevent accidental damage to the amplifier circuitry. Our driver provides $>1$ W of output power over a $10$ MHz to $1.1$ GHz frequency range, and $\geq 5$ W from $20$ MHz to $100$ MHz. The driver circuit includes auxiliary components for analog frequency and amplitude modulation ($\approx 70$ kHz bandwidth), as well as digital power switching ($> 30$ dB of extinction within $40$ ns and final extinction $> 90$ dB). The radio-frequency source can also be digitally switched between an external input and an integrated voltage-controlled oscillator. Our design is motivated by the need for flexible, inexpensive drivers of optically active devices, such as acousto-optic and electro-optic modulators.

physics.ins-det↗

arXiv2018

Microcontroller based scanning transfer cavity lock for long-term laser frequency stabilization

We present a compact all-digital implementation of a scanning transfer cavity lock (STCL) for long-term laser frequency stabilization. An interrupt-driven state machine is employed to realize the STCL, with the capability to correct for frequency drifts in the slave laser frequency due to measured changes in the lab environmental conditions. We demonstrate an accuracy of 0.9 MHz for master laser and slave laser wavelengths of 556 nm and 798 nm as an example. The slave laser is also demonstrated to dynamically scan over a wide frequency range while retaining its lock, allowing us to accurately interrogate atomic transitions.

physics.ins-det↗

arXiv2018

A low-steering piezo-driven mirror

We present a piezo-driven translatable mirror with excellent pointing stability, capable of driving at frequencies up to tens of kilohertz. Our system uses a tripod of piezo actuators with independently controllable drive voltages, where the ratios of the individual drive voltages are tuned to minimize residual tilting. Attached to a standard {\varnothing}= 12.7mm mirror, the system has a resonance-free mechanical bandwidth up to 51kHz, with displacements up to 2{\mu}m at 8kHz. The maximum static steering error is 5.5rad per micrometer displaced and the dynamic steering error is lower than 0.6rad/{\mu}m. This simple design should be useful for a large set of optical applications where tilt-free displacements are required, and we demonstrate its application in an ensemble of cold atoms trapped in periodically driven optical lattices.

physics.atom-ph↗

arXiv2016

An ultra-low noise, high-voltage piezo driver

We present an ultra-low noise, high-voltage driver suited for use with piezoelectric actuators and other low-current applications. The architecture uses a flyback switching regulator to generate up to 250V in our current design, with an output of 1 kV or more possible with small modifications. A high slew-rate op-amp suppresses the residual switching noise, yielding a total RMS noise of $\approx 100\mu$V (1 Hz--100 kHz). A low-voltage ($\pm 10$V), high bandwidth signal can be summed with unity gain directly onto the output, making the driver well-suited for closed-loop feedback applications. Digital control enables both repeatable setpoints and sophisticated control logic, and the circuit consumes less than 150mA at $\pm 15$V.

physics.ins-det↗

arXiv2016

Active Stabilization of Ion Trap Radiofrequency Potentials

We actively stabilize the harmonic oscillation frequency of a laser-cooled atomic ion confined in a rf Paul trap by sampling and rectifying the high voltage rf applied to the trap electrodes. We are able to stabilize the 1 MHz atomic oscillation frequency to better than 10 Hz, or 10 ppm. This represents a suppression of ambient noise on the rf circuit by 34 dB. This technique could impact the sensitivity of ion trap mass spectrometry and the fidelity of quantum operations in ion trap quantum information applications.

physics.atom-ph↗