arXiv subjects

A. Lee Swindlehurst

Publications and source records attributed to A. Lee Swindlehurst.

At least 55 records · Page 3Linked to original sources

arXiv2025

Sensing-Oriented Adaptive Resource Allocation Designs for OFDM-ISAC Systems

Orthogonal frequency division multiplexing - integrated sensing and communication (OFDM-ISAC) has emerged as a key enabler for future wireless networks, leveraging the widely adopted OFDM waveform to seamlessly integrate wireless communication and radar sensing within a unified framework. In this paper, we propose adaptive resource allocation strategies for OFDM-ISAC systems to achieve optimal trade-offs between diverse sensing requirements and communication quality-of-service (QoS). We first develop a comprehensive resource allocation framework for OFDM-ISAC systems, deriving closed-form expressions for key sensing performance metrics, including delay resolution, Doppler resolution, delay-Doppler peak sidelobe level (PSL), and received signal-to-noise ratio (SNR). Building on this theoretical foundation, we introduce two novel resource allocation algorithms tailored to distinct sensing objectives. The resolution-oriented algorithm aims to maximize the weighted delay-Doppler resolution while satisfying constraints on PSL, sensing SNR, communication sum-rate, and transmit power. The sidelobe-oriented algorithm focuses on minimizing delay-Doppler PSL while satisfying resolution, SNR, and communication constraints. To efficiently solve the resulting non-convex optimization problems, we develop two adaptive resource allocation algorithms based on Dinkelbach's transform and majorization-minimization (MM). Extensive simulations validate the effectiveness of the proposed sensing-oriented adaptive resource allocation strategies in enhancing resolution and sidelobe suppression. Remarkably, these strategies achieve sensing performance nearly identical to that of a radar-only scheme, which dedicates all resources to sensing. These results highlight the superior performance of the proposed methods in optimizing the trade-off between sensing and communication objectives within OFDM-ISAC systems.

eess.SP↗

arXiv2025

Byzantine-Resilient Over-the-Air Federated Learning under Zero-Trust Architecture

Over-the-air computation (AirComp) has emerged as an essential approach for enabling communication-efficient federated learning (FL) over wireless networks. Nonetheless, the inherent analog transmission mechanism in AirComp-based FL (AirFL) intensifies challenges posed by potential Byzantine attacks. In this paper, we propose a novel Byzantine-robust FL paradigm for over-the-air transmissions, referred to as federated learning with secure adaptive clustering (FedSAC). FedSAC aims to protect a portion of the devices from attacks through zero trust architecture (ZTA) based Byzantine identification and adaptive device clustering. By conducting a one-step convergence analysis, we theoretically characterize the convergence behavior with different device clustering mechanisms and uneven aggregation weighting factors for each device. Building upon our analytical results, we formulate a joint optimization problem for the clustering and weighting factors in each communication round. To facilitate the targeted optimization, we propose a dynamic Byzantine identification method using historical reputation based on ZTA. Furthermore, we introduce a sequential clustering method, transforming the joint optimization into a weighting optimization problem without sacrificing the optimality. To optimize the weighting, we capitalize on the penalty convex-concave procedure (P-CCP) to obtain a stationary solution. Numerical results substantiate the superiority of the proposed FedSAC over existing methods in terms of both test accuracy and convergence rate.

cs.IT↗

arXiv2025

Performance Analysis and Power Allocation for Massive MIMO ISAC Systems

Integrated sensing and communications (ISAC) is envisioned as a key feature in future wireless communications networks. Its integration with massive multiple-input-multiple-output (MIMO) techniques promises to leverage substantial spatial beamforming gains for both functionalities. In this work, we consider a massive MIMO-ISAC system employing a uniform planar array with zero-forcing and maximum-ratio downlink transmission schemes combined with monostatic radar-type sensing. Our focus lies on deriving closed-form expressions for the achievable communications rate and the Cramér--Rao lower bound (CRLB), which serve as performance metrics for communications and sensing operations, respectively. The expressions enable us to investigate important operational characteristics of massive MIMO-ISAC, including the mutual effects of communications and sensing as well as the advantages stemming from using a very large antenna array for each functionality. Furthermore, we devise a power allocation strategy based on successive convex approximation to maximize the communications rate while guaranteeing the CRLB constraints and transmit power budget. Extensive numerical results are presented to validate our theoretical analyses and demonstrate the efficiency of the proposed power allocation approach.

eess.SP↗

arXiv2025

Joint Array Partitioning and Beamforming Designs in ISAC Systems: A Bayesian CRB Perspective

Integrated sensing and communication (ISAC) has emerged as a promising paradigm for next-generation (6G) wireless networks, unifying radar sensing and communication on a shared hardware platform. This paper proposes a dynamic array partitioning framework for monostatic ISAC systems to fully exploit available spatial degrees of freedom (DoFs) and reconfigurable antenna topologies, enhancing sensing performance in complex scenarios. We first establish a theoretical foundation for our work by deriving Bayesian Cramér-Rao bounds (BCRBs) under prior distribution constraints for heterogeneous target models, encompassing both point-like and extended targets. Building on this, we formulate a joint optimization framework for transmit beamforming and dynamic array partitioning to minimize the derived BCRBs for direction-of-arrival (DOA) estimation. The optimization problem incorporates practical constraints, including multi-user communication signal-to-interference-plus-noise ratio (SINR) requirements, transmit power budgets, and array partitioning feasibility conditions. To address the non-convexity of the problem, we develop an efficient alternating optimization algorithm combining the alternating direction method of multipliers (ADMM) with semi-definite relaxation (SDR). We also design novel maximum a posteriori (MAP) DOA estimation algorithms specifically adapted to the statistical characteristics of each target model. Extensive simulations illustrate the superiority of the proposed dynamic partitioning strategy over conventional fixed-array architectures across diverse system configurations.

eess.SP↗

arXiv2025

Low Range-Doppler Sidelobe ISAC Waveform Design: A Low-Complexity Approach

Integrated sensing and communication (ISAC) is a pivotal enabler for next-generation wireless networks. A key challenge in ISAC systems lies in designing dual-functional waveforms that can achieve satisfactory radar sensing accuracy by effectively suppressing range-Doppler sidelobes. However, existing solutions are often computationally intensive, limiting their practicality in multi-input multi-output (MIMO) orthogonal frequency division multiplexing (OFDM) ISAC deployments. This paper presents a novel low-complexity algorithm leveraging the augmented Lagrangian method (ALM) and Riemannian conjugate gradient (RCG) optimization techniques to address these challenges. The proposed algorithm achieves superior sidelobe suppression compared to state-of-the-art methods while dramatically reducing computational complexity, making it highly suitable for real-world MIMO-OFDM ISAC systems. Simulation results demonstrate that the proposed approach not only outperforms existing benchmarks in sidelobe reduction but also accelerates convergence, ensuring efficient performance across communication and sensing tasks.

eess.SP↗

arXiv2025

Optimal ISAC Beamforming Structure and Efficient Algorithms for Sum Rate and CRLB Balancing

Integrated sensing and communications (ISAC) has emerged as a promising paradigm to unify wireless communications and radar sensing, enabling efficient spectrum and hardware utilization. A core challenge with realizing the gains of ISAC stems from the unique challenges of dual purpose beamforming design due to the highly non-convex nature of key performance metrics such as sum rate for communications and the Cramer-Rao lower bound (CRLB) for sensing. In this paper, we propose a low-complexity structured approach to ISAC beamforming optimization to simultaneously enhance spectral efficiency and estimation accuracy. Specifically, we develop a successive convex approximation (SCA) based algorithm which transforms the original non-convex problem into a sequence of convex subproblems ensuring convergence to a locally optimal solution. Furthermore, leveraging the proposed SCA framework and the Lagrange duality, we derive the optimal beamforming structure for CRLB optimization in ISAC systems. Our findings characterize the reduction in radar streams one can employ without affecting performance. This enables a dimensionality reduction that enhances computational efficiency. Numerical simulations validate that our approach achieves comparable or superior performance to the considered benchmarks while requiring much lower computational costs.

cs.IT↗

arXiv2025

Intelligent Reflecting Surface-Aided Electromagnetic Stealth over Extended Regions

Compared to traditional electromagnetic stealth (ES) materials, which are effective only within specific frequencies and orientations, intelligent reflecting surface (IRS) technology introduces a novel paradigm for achieving dynamic and adaptive ES by adapting its reflection pattern in real time to neutralize radar probing signals echoed back from the target. In this letter, we study an IRS-aided ES system mounted on an aerial target to evade radar detection admist uncertain/moving radar positions over an extended area. Specifically, we aim to optimize the IRS's passive reflection to minimize the maximum received signal-to-noise ratio (SNR) of the target echo signal in the area. A semi-closed-form solution is derived by first discretizing the continuous spatial frequency deviation to approximate the semi-infinite reflection gain constraint and then leveraging the Lagrange dual method. Simulation results are provided to validate that the proposed IRS-aided ES strategy can consistently reduce the reflection gains for radars located across a large region.

eess.SP↗

arXiv2025

DOA Estimation-Oriented Joint Array Partitioning and Beamforming Designs for ISAC Systems

Integrated sensing and communication has been identified as an enabling technology for forthcoming wireless networks. In an effort to achieve an improved performance trade-off between multiuser communications and radar sensing, this paper considers a dynamically-partitioned antenna array architecture for monostatic ISAC systems, in which each element of the array at the base station can function as either a transmit or receive antenna. To fully exploit the available spatial degrees of freedom for both communication and sensing functions, we jointly design the partitioning of the array between transmit and receive antennas together with the transmit beamforming in order to minimize the direction-of-arrival (DOA) estimation error, while satisfying constraints on the communication signal-to-interference-plus-noise ratio and the transmit power budget. An alternating algorithm based on Dinkelbach's transform, the alternative direction method of multipliers, and majorization-minimization is developed to solve the resulting complicated optimization problem. To reduce the computational complexity, we also present a heuristic three-step strategy that optimizes the transmit beamforming after determining the antenna partitioning. Simulation results confirm the effectiveness of the proposed algorithms in significantly reducing the DOA estimation error.

eess.SP↗

arXiv2025

SNR/CRB-Constrained Joint Beamforming and Reflection Designs for RIS-ISAC Systems

In this paper, we investigate the integration of integrated sensing and communication (ISAC) and reconfigurable intelligent surfaces (RIS) for providing wide-coverage and ultra-reliable communication and high-accuracy sensing functions. In particular, we consider an RIS-assisted ISAC system in which a multi-antenna base station (BS) simultaneously performs multi-user multi-input single-output (MU-MISO) communications and radar sensing with the assistance of an RIS. We focus on both target detection and parameter estimation performance in terms of the signal-to-noise ratio (SNR) and Cramer-Rao bound (CRB), respectively. Two optimization problems are formulated for maximizing the achievable sum-rate of the multi-user communications under an SNR constraint for target detection or a CRB constraint for parameter estimation, the transmit power budget, and the unit-modulus constraint of the RIS reflection coefficients. Efficient algorithms are developed to solve these two complicated non-convex problems. Extensive simulation results demonstrate the advantages of the proposed joint beamforming and reflection designs compared with other schemes. In addition, it is shown that more RIS reflection elements bring larger performance gains for direct-of-arrival (DoA) estimation than for target detection.

eess.SP↗

arXiv2025

Digital and Hybrid Precoding Designs in Massive MIMO with Low-Resolution ADCs

Low-resolution analog-to-digital converters (ADCs) have emerged as an efficient solution for massive multiple-input multiple-output (MIMO) systems to reap high data rates with reasonable power consumption and hardware complexity. In this paper, we study precoding designs for digital, fully connected (FC) hybrid, and partially connected (PC) hybrid beamforming architectures in massive MIMO systems with low-resolution ADCs at the receiver. We aim to maximize the spectral efficiency (SE) subject to a transmit power budget and hardware constraints on the analog components. The resulting problems are nonconvex and the quantization distortion introduces additional challenges. To address them, we first derive a tight lower bound for the SE, based on which we optimize the precoders for the three beamforming architectures under the majorization-minorization framework. Numerical results validate the superiority of the proposed precoding designs over their state-of-the-art counterparts in systems with low-resolution ADCs, particularly those with 1-bit resolution. The results show that the PC hybrid precoding design can achieve an SE close to those of the digital and FC hybrid precoding designs in 1-bit systems, highlighting the potential of the PC hybrid beamforming architectures.

eess.SP↗

arXiv2025

Channel Estimation for RIS-Aided MU-MIMO mmWave Systems with Practical Hybrid Architecture

This paper proposes a correlation-based three-stage channel estimation strategy with low pilot overhead for reconfigurable intelligent surface (RIS)-aided millimeter wave (mmWave) multi-user (MU) MIMO systems, in which both users and base station (BS) are equipped with a hybrid RF architecture. In Stage I, all users jointly transmit pilots and recover the uncompressed received signals to estimate the angle of arrival (AoA) at the BS using the discrete Fourier transform (DFT). Based on the observation that the overall cascaded MIMO channel can be decomposed into multiple sub-channels, the cascaded channel for a typical user is estimated in Stage II. Specifically, using the invariance of angles and the linear correlation of gains related to different cascaded subchannels, we use compressive sensing (CS), least squares (LS), and a one-dimensional search to estimate the Angles of Departure (AoDs), based on which the overall cascaded channel is obtained. In Stage III, the remaining users independently transmit pilots to estimate their individual cascaded channel with the same approach as in Stage II, which exploits the equivalent common RIS-BS channel obtained in Stage II to reduce the pilot overhead. In addition, the hybrid combining matrix and the RIS phase shift matrix are designed to reduce the noise power, thereby further improving the estimation performance. Simulation results demonstrate that the proposed algorithm can achieve high estimation accuracy especially when the number of antennas at the users is small, and reduce pilot overhead by more than five times compared with the existing benchmark approach.

eess.SP↗

arXiv2025

On Optimal MMSE Channel Estimation for One-Bit Quantized MIMO Systems

This paper focuses on the minimum mean squared error (MMSE) channel estimator for multiple-input multiple-output (MIMO) systems with one-bit quantization at the receiver side. Despite its optimality and significance in estimation theory, the MMSE channel estimator has not been fully investigated in this context due to its general non-linearity and computational complexity. Instead, the typically suboptimal Bussgang linear MMSE (BLMMSE) estimator has been widely adopted. In this work, we develop a new framework to compute the MMSE channel estimator that hinges on computation of the orthant probability of the multivariate normal distribution. Based on this framework, we determine a necessary and sufficient condition for the BLMMSE channel estimator to be optimal and equivalent to the MMSE estimator. Under the assumption of specific channel correlation or pilot symbols, we further utilize the framework to derive analytical expressions for the MMSE channel estimator that are particularly convenient for computation when certain system dimensions become large, thereby enabling a comparison between the BLMMSE and MMSE channel estimators in these cases.

cs.IT↗

arXiv2024

RIS-Assisted Sensing: A Nested Tensor Decomposition-Based Approach

We study a monostatic multiple-input multiple-output sensing scenario assisted by a reconfigurable intelligent surface using tensor signal modeling. We propose a method that exploits the intrinsic multidimensional structure of the received echo signal, allowing us to recast the target sensing problem as a nested tensor-based decomposition problem to jointly estimate the delay, Doppler, and angular information of the target. We derive a two-stage approach based on the alternating least squares algorithm followed by the estimation of the signal parameters via rotational invariance techniques to extract the target parameters. Simulation results show that the proposed tensor-based algorithm yields accurate estimates of the sensing parameters with low complexity.

eess.SP↗

arXiv2024

Deep Unfolding-Empowered MmWave Massive MIMO Joint Communications and Sensing

In this paper, we propose a low-complexity and fast hybrid beamforming design for joint communications and sensing (JCAS) based on deep unfolding. We first derive closed-form expressions for the gradients of the communications sum rate and sensing beampattern error with respect to the analog and digital precoders. Building on this, we develop a deep neural network as an unfolded version of the projected gradient ascent algorithm, which we refer to as UPGANet. This approach efficiently optimizes the communication-sensing performance tradeoff with fast convergence, enabled by the learned step sizes. UPGANet preserves the interpretability and flexibility of the conventional PGA optimizer while enhancing performance through data training. Our simulations show that UPGANet achieves up to a 33.5% higher communications sum rate and 2.5 dB lower beampattern error compared to conventional designs based on successive convex approximation and Riemannian manifold optimization. Additionally, it reduces runtime and computational complexity by up to 65% compared to PGA without unfolding.

eess.SP↗

arXiv2024

Non-Reciprocal Reconfigurable Intelligent Surfaces

In contrast to conventional RIS, the scattering matrix of a non-reciprocal RIS (NR-RIS) is non-symmetric, leading to differences in the uplink and the downlink components of NR-RIS cascaded channels. In this paper, a physically-consistent device model is proposed in which an NR-RIS is composed of multiple groups of two-port elements inter-connected by non-reciprocal devices. The resulting non-reciprocal scattering matrix is derived for various cases including two-element groups connected with isolators or gyrators, and general three-element groups connected via circulators. Signal models are given for NR-RIS operating in either reflecting-only or simultaneously transmitting and reflecting modes. The problem of NR-RIS design for non-reciprocal beamsteering is formulated for three-element circulator implementations, and numerical results confirm that non-reciprocal beamsteering can be achieved with minimal sidelobe power. We also show that our physically consistent NR-RIS architecture is effective in implementing channel reciprocity attacks, achieving similar performance to that with idealized NR-RIS models.

eess.SP↗

arXiv2024

CRB Optimization using a Parametric Scattering Model for Extended Targets in ISAC Systems

This paper presents a novel parametric scattering model (PSM) for sensing extended targets in integrated sensing and communication (ISAC) systems. The PSM addresses the limitations of traditional models by efficiently capturing the target's angular characteristics through a compact set of key parameters, including the central angle and angular spread, enabling efficient optimization. Based on the PSM, we first derive the Cramer-Rao Bound (CRB) for parameter estimation and then propose a beamforming design algorithm to minimize the CRB while meeting both communication signal-to-interference-plus-noise ratio (SINR) and power constraints. By integrating the PSM into the beamforming optimization process, the proposed framework achieves superior CRB performance while balancing the tradeoff between sensing accuracy and communication quality. Simulation results demonstrate that the PSM-based approach consistently outperforms traditional unstructured and discrete scattering models, particularly in resource-limited scenarios, highlighting its practical applicability and scalability.

eess.SP↗

arXiv2024

Channel-Coded Precoding for Multi-User MISO Systems

Precoding is a critical and long-standing technique in multi-user communication systems. However, the majority of existing precoding methods do not consider channel coding in their designs. In this paper, we consider the precoding problem in multi-user multiple-input single-output (MISO) systems, incorporating channel coding into the design. By leveraging the error-correcting capability of channel codes we increase the degrees of freedom in the transmit signal design, thereby enhancing the overall system performance. We first propose a novel data-dependent precoding framework for coded MISO systems, referred to as channel-coded precoding (CCP), which maximizes the probability that information bits can be correctly recovered by the channel decoder. This proposed CCP framework allows the transmit signals to produce data symbol errors at the users' receivers, as long as the overall information BER performance can be improved. We develop the CCP framework for both one-bit and multi-bit error-correcting capacity and devise a projected gradient-based approach to solve the design problem. We also develop a robust CCP framework for the case where knowledge of perfect channel state information (CSI) is unavailable at the transmitter, taking into account the effect of both noise and channel estimation errors. Finally, we conduct numerous simulations to verify the effectiveness of the proposed CCP and its superiority compared to existing precoding methods, and we identify situations where the proposed CCP yields the most significant gains.

eess.SP↗

arXiv2024

RIS-Aided Dual-Polarized MIMO: How Large a Surface is Needed to Beat Single Polarization?

Dual-polarized (DP) multiple-input-multiple-output (MIMO) systems have been widely adopted in commercial mobile wireless communications. Such systems achieve multiplexing and diversity gain by exploiting the polarization dimension. However, existing studies have shown that the capacity of DP MIMO may not surpass that of single-polarized (SP) MIMO systems due to the cross-polarization coupling induced by the propagation environment. In this letter, we employ reconfigurable intelligent surfaces (RISs) to address this issue and investigate how large the surface should be to ensure a better performance for DP MIMO. Specifically, we first derive the capacities of DP and SP MIMO systems with an RIS, and then study the influence of the RIS size on the system capacity. Our analyses reveal how to deploy the RIS in a DP MIMO scenario.

eess.SP↗