arXiv ScienceSearch

arXiv subjects

A. Lee Swindlehurst

Publications and source records attributed to A. Lee Swindlehurst.

At least 19 recordsLinked to original sources

Feasible but Not Safe: Constraint Violations and Report-Channel Attacks in Learned Cell-Free ISAC Association

Learning-based schedulers have been proposed to provide real-time user, target, and access point (AP) association in distributed cell-free integrated sensing and communication systems. In a typical approach, a graph neural network (GNN), trained on labels from a mixed-integer linear program, maps lightweight per-AP statistics to decisions on AP clustering, user and target scheduling, and mode selection in one forward pass. Such solutions assume that hard constraints, enforced only as soft training penalties, hold at inference, and that the self-reported statistics are truthful. Using our ASSENT algorithm as an example, we find that despite high $F_1$ scores, many solutions violate at least one hard constraint, demonstrating that high prediction accuracy does not ensure joint feasibility. Projecting the GNN output onto a feasible solution restores constraint satisfaction with low utility loss, even with a simple greedy repair procedure. We further show that feasibility alone does not guarantee robustness to false data injection attacks. A single malicious AP that reports false information cannot substantially increase its user associations, but can greatly increase the rate of infeasible solutions. The effect of such attacks depends on the type of information being falsified. Misreporting information that affects the objective can largely be mitigated through feasibility projection, whereas falsifying information that affects the constraints cannot. The latter can, however, be detected using a low-complexity cross-AP consistency check. These results show that learned ISAC schedulers should be evaluated using constraint-aware feasibility metrics in addition to conventional accuracy measures.

cs.NI

Parametric Diffraction-Based Object Sensing: Modeling, Estimation, and Fundamental Limits

This paper proposes a rigorous framework for sensing of environmental objects using diffraction mechanisms prevalent at wireless communication frequencies. Specifically, we develop a physics-consistent parameterized diffraction channel model, derive maximum likelihood (ML) approaches for estimating the blockage shape, range, and source directions of arrival (DoAs), and quantify fundamental performance limits via the Cram\'er--Rao bound (CRB). In our physics-based modeling, we integrate various approximations for the wave propagation (far-field, paraxial Fresnel, and exact near-field regimes), enabling a wide range of applicability. The underlying model is frequency-agnostic, and we derive Fresnel-number scaling laws that map the diffraction pattern, and hence the estimation problem, across carrier frequency, object size, and range. We quantify the maximum likelihood estimation performance and its relationship to the CRB, and we study the impact of the modeling approximations developed in this work. Numerical results demonstrate that ML estimators closely approach the CRB at moderate to high signal-to-noise ratio (SNR), and highlight the utility of diffraction-based modeling for high-fidelity blockage characterization.

eess.SP

Multiuser MIMO-AFDM Beamforming for ISAC in Doubly Dispersive Channels

Integrated sensing and communication (ISAC) in high-mobility channels requires waveform and beamforming designs that are robust to delay-Doppler dispersion. With this in mind, in this paper we study a monostatic multiuser multiple-input multiple-output (MIMO) affine frequency division multiplexing (AFDM) downlink system. We develop a discrete affine Fourier transform (DAFT)-domain model that preserves Doppler-induced inter-bin coupling and derive a data-aided delay-Doppler detector. The expected matched-bin detector signal-to-noise ratio (SNR) is shown to be proportional to a transmit-covariance beampattern, which leads to a detector-SNR-based sector-illumination constraint. The resulting sensing-constrained weighted sum-rate maximization problem is solved using a combined weighted minimum mean squared error (WMMSE) and majorization-minimization (MM) formulation. Simulations show that the proposed AFDM design outperforms its orthogonal frequency division multiplexing (OFDM) counterpart in terms of the rate-sensing tradeoff, robustness to Doppler, and delay-Doppler sensing quality.

eess.SP

Lightweight Vision-Aided Beam Tracking for Cross-Environment mmWave Communications

Sensing-aided beam tracking is a promising approach to reduce the overhead for millimeter-wave beam management. However, real-world application remains challenging due to rapid channel variations and substantial environmental differences across deployment scenarios. Developing low-complexity sensing assisted approaches that generalize to diverse environments can alleviate the problem. With this motivation, this paper proposes a lightweight vision-aided model for cross-environment beam tracking. The task is formulated as a sequence-to-sequence classification problem, where the model jointly predicts the current and future optimal beams from past visual observations. We develop a low-complexity model based on depthwise separable convolutions and introduce hierarchical data augmentation and beam power-based label smoothing to improve robustness and generalization. Experimental results on real-world images from two geometrically distinct DeepSense 6G scenarios show that the proposed strategies consistently improve cross-environment beam prediction accuracy up to 84% across the current and three future time slots, outperforming the state-of-the-art solution. Notably, this performance is achieved while reducing the number of model parameters and computational complexity by factors of approximately 52 and 79, respectively, compared with the high-capacity ResNet baseline.

eess.SP

Robust Beamforming Design for Secure Uplink NOMA-ISAC

Integrated sensing and communication is an important technology for sixth-generation (6G) mobile networks, enabling the joint use of communication and radar sensing within a unified system. While offering significant benefits in terms of spectral efficiency, ISAC introduces new security challenges. In particular, the joint use of resources for sensing and communication can increase vulnerability to eavesdropping and information leakage. In this paper, we study an uplink Non-Orthogonal Multiple Access (NOMA) system where the base station (BS) simultaneously receives user data and senses a potential eavesdropper (Eve) with uncertain location. To enhance the physical-layer security, a robust sensing signal is designed to both sense and jam Eve. We formulate a joint optimization problem that aims to maximize the users' sum rate and the BS sensing performance while maintaining security against Eve. Since the resulting optimization problem is non-convex, we develop an iterative alternating optimization (AO) algorithm that decomposes it into two tractable subproblems. In the first subproblem, the receive combining vectors are optimized in closed form using generalized eigenvalue decomposition. In the second subproblem, the transmit beamforming matrices and sensing power are jointly optimized via semidefinite relaxation (SDR) and successive convex approximation (SCA). Simulation results demonstrate the effectiveness of our solution in terms of fast convergence and resource allocation.

eess.SP

Decoupled Delay-Doppler and Angle Estimation in BD-RIS Sensing via Nested Tucker Decomposition

We study single-target localization in a group-connected beyond-diagonal reconfigurable intelligent surface (BD-RIS)-assisted monostatic network with K element groups. We propose a Nested Tensor Factorization and Estimation (NTFE) algorithm that models the received signal as a 3rd-order nested Tucker tensor, decoupling the delay-Doppler and angle domains. The resulting two-stage procedure estimates the target-bearing tensor factors and then extracts the other physical parameters using subspace and closed-form steps. We also analyze identifiability and uniqueness conditions. Simulations show that NTFE exploits the group-connected BD-RIS structure and outperforms state-of-the-art sensing benchmarks.

eess.SP

Multi-Target Estimation via Tensor Decomposition for Beyond Diagonal RIS-Aided Bistatic Sensing

We investigate the performance of beyond-diagonal reconfigurable intelligent surfaces (BD-RIS) for bistatic MIMO multi-target sensing using a two-stage tensor Doppler-delay-angle estimation (TenDAE). The first stage solves a Kronecker sum approximation (KSA) with a rank equal to the number of targets. The second stage employs a nested tensor factorization estimation (NTFE) that exploits the inherent multidimensional structure via two tensor decompositions that are solved in parallel. The first employs a PARAFAC decomposition to extract the targets' angles, and the second uses a nested PARAFAC decomposition to find the targets' delay and Doppler parameters. This two-stage approach decouples acquisition of the angles and delays/Dopplers using either alternating least squares or a higher-order singular value decomposition, followed by a high-resolution subspace technique, such as ESPRIT. We further compare the performance of a BD-RIS with a classical diagonal RIS. For the latter, we solve a Khatri-Rao sum approximation problem rather than the KSA due to the specific structure of the received signal. Notably, our NTFE framework remains blind to the underlying RIS architecture while simultaneously estimating all targets with minimal sensing resources. Additionally, we show that employing a nested-PARAFAC decomposition enables the decoupling of the delay-Doppler and angle domains. We also derive the Cram\'er-Rao lower bound to further assess the performance of the TenDAE framework. Finally, we numerically evaluate the solutions presented in this paper and demonstrate their efficiency in terms of RMSE compared with state-of-the-art approaches.

eess.SP

Knowledge Distillation for Lightweight Multimodal Sensing-Aided mmWave Beam Tracking

Beam training and prediction in real-world millimeter-wave (mmWave) communications systems are challenging due to rapidly time-varying channels and strong interference from surrounding objects. In this context, widely available sensors, such as cameras and radars, can capture rich environmental information, enabling efficient beam management. This paper proposes a knowledge-distillation (KD)-enabled learning framework for developing lightweight and low-complexity models for beam prediction and tracking using real-world camera and radar data from the DeepSense 6G dataset. Specifically, a powerful teacher network based on convolutional neural networks (CNNs) and gated recurrent units (GRUs) is first designed to predict current and future beams from historical sensor observations. Then, a compact student model is constructed and trained via KD to transfer the predictive capability of the teacher model to a lightweight architecture. Simulation results demonstrate that jointly leveraging radar and image modalities significantly outperforms single-modality approaches. Moreover, the proposed student model achieves over 96% Top-5 beam prediction accuracy while reducing computational complexity by more than 4 times and the number of parameters by over 27 times compared with the teacher model.

eess.SP

Knowledge Distillation for Collaborative Learning in Distributed Communications and Sensing

The rise of sixth generation (6G) wireless networks promises to deliver ultra-reliable, low-latency, and energy-efficient communications, sensing, and computing. However, traditional centralized artificial intelligence (AI) paradigms are ill-suited to the decentralized, resource-constrained, and dynamic nature of 6G ecosystems. This paper explores knowledge distillation (KD) and collaborative learning as promising techniques that enable the efficient and scalable deployment of lightweight AI models across distributed communications and sensing (C&S) nodes. We begin by providing an overview of KD and highlight the key strengths that make it particularly effective in distributed scenarios characterized by device heterogeneity, task diversity, and constrained resources. We then examine its role in fostering collective intelligence through collaborative learning between the central and distributed nodes via various knowledge distilling and deployment strategies. Finally, we present a systematic numerical study demonstrating that KD-empowered collaborative learning can effectively support lightweight AI models for multi-modal sensing-assisted beam tracking applications with substantial performance gains and complexity reduction.

eess.SP

Extended Target Sensing in MIMO-OFDM ISAC Systems: Modeling, Optimization and Estimation

This paper develops a comprehensive target modeling, beamforming optimization, and parameter estimation framework for extended-target sensing in wideband MIMO-OFDM integrated sensing and communication systems. We propose a parametric scattering model (PSM) that decouples target geometry from electromagnetic scattering characteristics, requiring only six nonlinear geometric parameters and linear radar cross-section (RCS) coefficients. Based on this compact structure, we derive a hybrid Bayesian Cram\'{e}r-Rao bound (CRB) for joint estimation of azimuth, elevation, and range-related parameters. To handle inherent range ambiguities due to OFDM signaling, we analyze the range ambiguity function and introduce range sidelobe suppression constraints around the true range. Based on these constraints, we formulate an ambiguity-aware transmit beamforming design that minimizes a weighted geometric CRB subject to per-user signal-to-interference-plus-noise ratio (SINR) requirements and a total power budget. As benchmarks, we extend two other common models to the same wideband MIMO-OFDM scenario. We also derive maximum a posteriori estimators and a computational complexity analysis for all three models. Simulation results demonstrate that the proposed PSM-based approach achieves improved target localization with significantly reduced runtime for beamforming optimization and parameter estimation, while consistently satisfying communication SINR requirements.

eess.SP

Robust Wildfire Forecasting under Partial Observability: From Reconstruction to Prediction

Satellite-derived fire observations are the primary input for learning-based wildfire spread prediction, yet they are inherently incomplete due to cloud cover, smoke obscuration, and sensor artifacts. This partial observability introduces a domain gap between the clean data used to train forecasting models and the degraded inputs encountered during deployment, often leading to unreliable predictions. To address this challenge, we formulate wildfire forecasting under partial observability using a two-stage probabilistic framework that decouples observation recovery from spatiotemporal prediction. Stage-I reconstructs plausible fire maps from corrupted observations via conditional inpainting, while Stage-II models wildfire dynamics on the recovered sequences using a spatiotemporal forecasting network. We consider four network architectures for the reconstruction module-a Residual U-Net (MaskUNet), a Conditional VAE (MaskCVAE), a cross-attention Vision Transformer (MaskViT), and a discrete diffusion model (MaskD3PM)-spanning CNN-based, latent-variable, attention-based, and diffusion-based approaches. We evaluate the performance of the two-stage approach on the WildfireSpreadTS (WSTS) dataset under various settings, including pixel-wise and block-wise masking, eight corruption levels (10%-80%), four fire scenarios, and leave-one-year-out cross-validation. Results show that all learning-based recovery models substantially outperform non-learning baselines, with MaskCVAE and MaskUNet achieving the strongest overall performance. Importantly, inserting the reconstruction stage before forecasting significantly mitigates the domain gap, restoring next-day prediction accuracy to near-clean-input levels even under severe information loss.

eess.IV

Clutter-Aware Integrated Sensing and Communication: Models, Methods, and Future Directions

Integrated sensing and communication (ISAC) can substantially improve spectral, hardware, and energy efficiency by unifying radar sensing and data communications. In wideband and scattering-rich environments, clutter often dominates weak target reflections and becomes a fundamental bottleneck for reliable sensing. Practical ISAC clutter includes "cold" clutter arising from environmental backscatter of the probing waveform, and "hot" clutter induced by external interference and reflections from the environment whose statistics can vary rapidly over time. In this article, we develop a unified wideband multiple-input multiple-output orthogonal frequency-division multiplexing (MIMO-OFDM) signal model that captures both clutter types across the space, time, and frequency domains. Building on this model, we review clutter characterization at multiple levels, including amplitude statistics, robust spherically invariant random vector (SIRV) modeling, and structured covariance representations suitable for limited-snapshot regimes. We then summarize receiver-side suppression methods in the temporal and spatial domains, together with extensions to space-time adaptive processing (STAP) and space-frequency-time adaptive processing (SFTAP), and we provide guidance on selecting techniques under different waveform and interference conditions. To move beyond reactive suppression, we discuss clutter-aware transceiver co-design that couples beamforming and waveform optimization with practical communication quality-of-service (QoS) constraints to enable proactive clutter avoidance. We conclude with open challenges and research directions toward environment-adaptive and clutter-resilient ISAC for next-generation networks.

eess.SP

OFDM-ISAC Beyond CP Limit: Performance Analysis and Mitigation Algorithms

Orthogonal frequency division multiplexing (OFDM) is well-suited for integrated sensing and communications (ISAC), yet its cyclic prefix (CP) is dimensioned for communications-grade multipath and is generally insufficient for sensing. When echoes exceed the CP duration, inter-symbol and inter-carrier interference (ISI/ICI) break subcarrier orthogonality and degrade sensing. This paper presents a unified analytical and algorithmic framework for OFDM-ISAC beyond the CP limit. We first develop a general echo model that explicitly captures the structured coupling of ISI and ICI caused by CP insufficiency. Building on this model, we derive closed-form signal-to-interference-plus-noise ratio (SINR) and range-Doppler Map (RDM) second-order moment, together with an approximate peak sidelobe level ratio (PSLR), both of which are shown to deteriorate approximately linearly with the normalized excess delay beyond the CP. To mitigate these effects, we propose two standard-compatible successive interference cancellation (SIC) methods: SIC-DFT, a low-complexity DFT-based scheme, and SIC-ESPRIT, a super-resolution subspace approach. Simulations corroborate the analysis and demonstrate consistent gains over representative benchmarks. Both algorithms provide more than $4$~dB SINR improvement under CP-insufficient conditions, while SIC-ESPRIT reduces range/velocity root-mean-square-errors (RMSE) by about one order of magnitude, approaching the performance achievable with a sufficiently long CP. These results offer both theoretical insight and practical solutions for reliable long-range OFDM-ISAC sensing beyond the CP limit.

eess.SP

ASSENT: Learning-Based Association Optimization for Distributed Cell-Free ISAC

Integrated Sensing and Communication (ISAC) is a key emerging 6G technology. Despite progress, ISAC still lacks scalable methods for joint AP clustering and user/target scheduling in distributed deployments under fronthaul limits. Moreover, existing ISAC solutions largely rely on centralized processing and full channel state information, limiting scalability. This paper addresses joint access point (AP) clustering, user and target scheduling, and AP mode selection in distributed cell-free ISAC systems operating with constrained fronthaul capacity. We formulate the problem as a mixed-integer linear program (MILP) that jointly captures interference coupling, RF-chain limits, and sensing requirements, providing optimal but computationally demanding solutions. To enable real-time and scalable operation, we propose ASSENT (ASSociation and ENTity selection), a graph neural network (GNN) framework trained on MILP solutions to efficiently learn association and mode-selection policies directly from lightweight link statistics. Simulations show that ASSENT achieves near-optimal utility while accurately learning the underlying associations. Additionally, its single forward pass inference reduces decision latency compared to optimization-based methods. An open-source Python/PyTorch implementation with full datasets is provided to facilitate reproducible and extensible research in cell-free ISAC.

eess.SP

Reconfigurable Antenna Arrays: Bridging Electromagnetics and Signal Processing

Reconfigurable antennas (RAs), capable of dynamically adapting their radiation patterns, polarization states, and operating frequencies, have emerged as a promising technology to meet the stringent performance requirements of sixth-generation (6G) wireless networks. This article systematically introduces essential hardware implementations of RAs and investigates advanced array architectures, such as fully-digital and tri-hybrid designs, emphasizing their capability to synergistically integrate electromagnetic (EM) reconfigurability with analog and digital signal processing. By facilitating coordinated beamforming across the EM and signal processing domains, RA arrays offer unprecedented flexibility and adaptability compared to conventional static antenna systems. Representative applications empowered by RA arrays, including integrated sensing and communication (ISAC), physical layer security (PLS), and near-field communications, are highlighted. A case study illustrates the effectiveness of RA arrays in optimizing beam steering, improving link robustness, and alleviating system power consumption. Finally, several open challenges and future research directions are outlined, emphasizing the need for advancements in theoretical modeling, hardware reliability, channel estimation techniques, intelligent optimization methods, and innovative network architectures, to fully realize the transformative impact of RAs in future 6G wireless networks.

eess.SP

Task-Based Quantization for Channel Estimation in RIS Empowered MmWave Systems

In this paper, we investigate channel estimation for reconfigurable intelligent surface (RIS) empowered millimeter-wave (mmWave) multi-user single-input multiple-output communication systems using low-resolution quantization. Due to the high cost and power consumption of analog-to-digital converters (ADCs) in large antenna arrays and for wide signal bandwidths, designing mmWave systems with low-resolution ADCs is beneficial. To tackle this issue, we propose a channel estimation design using task-based quantization that considers the underlying hybrid analog and digital architecture in order to improve the system performance under finite bit-resolution constraints. Our goal is to accomplish a channel estimation task that minimizes the mean squared error distortion between the true and estimated channel. We develop two types of channel estimators: a cascaded channel estimator for an RIS with purely passive elements, and an estimator for the separate RIS-related channels that leverages additional information from a few semi-passive elements at the RIS capable of processing the received signals with radio frequency chains. Numerical results demonstrate that the proposed channel estimation designs exploiting task-based quantization outperform purely digital methods and can effectively approach the performance of a system with unlimited resolution ADCs. Furthermore, the proposed channel estimators are shown to be superior to baselines with small training overhead.

cs.IT

Nonreciprocal RIS-Aided Covert Channel Reciprocity Attacks and Countermeasures

Reconfigurable intelligent surface (RIS) technology enhances wireless communication performance, but it also introduces new vulnerabilities that can be exploited by adversaries. This paper investigates channel reciprocity attack (CRACK) threats in multi-antenna wireless systems operating in time-division duplexing mode using a physically consistent non-reciprocal RIS (NR-RIS) model. CRACK can degrade communication rate and facilitate passive eavesdropping behavior by distorting the downlink precoding, without requiring any additional signal transmission or channel state information (CSI). Unlike conventional RIS jamming strategies, the NR-RIS does not need synchronization with the legitimate system and thus can operate with slow or fixed configurations to implement CRACK, obscuring the distinction between the direct and RIS-induced channels and thereby complicating corresponding defensive precoding designs. To counter the CRACK threat posed by NR-RIS, we develop ``SecureCoder,'' a deep reinforcement learning-based framework that can mitigate CRACK and determine an improved downlink precoder matrix using the estimated uplink CSI and rate feedback from the users. Simulation results demonstrate the severe performance degradation caused by NR-RIS CRACK and validate the effectiveness of SecureCoder in improving both throughput and reducing security threats, thereby enhancing system robustness.

eess.SP

Knowledge Distillation for Sensing-Assisted Long-Term Beam Tracking in mmWave Communications

Infrastructure-mounted sensors can capture rich environmental information to enhance communications and facilitate beamforming in millimeter-wave systems. This work presents an efficient sensing-assisted long-term beam tracking framework that selects optimal beams from a codebook for current and multiple future time slots. We first design a large attention-enhanced neural network (NN) to fully exploit past visual observations for beam tracking. A convolutional NN extracts compact image features, while gated recurrent units with attention capture the temporal dependencies within sequences. The large NN then acts as the teacher to guide the training of a lightweight student NN via knowledge distillation. The student requires shorter input sequences yet preserves long-term beam prediction ability. Numerical results demonstrate that the teacher achieves Top-5 accuracies exceeding 93% for current and six future time slots, approaching state-of-the-art performance with a 90% reduction of model parameters. The student closely matches the teacher's performance while reducing the number of model parameters by over 1670% and cutting complexity by over 450%, despite operating with 60% shorter input sequences. This improvement significantly enhances data efficiency, reduces latency, and reduces power consumption in sensing and processing.

eess.SP