arXiv ScienceSearch

arXiv subjects

A. Colin

Publications and source records attributed to A. Colin.

12 recordsLinked to original sources

Status of the STUDIO UV balloon mission and platform

Stratospheric balloons offer accessible and affordable platforms for observations in atmosphere-constrained wavelength ranges. At the same time, they can serve as an effective step for technology demonstration towards future space applications of instruments and other hardware. The Stratospheric UV Demonstrator of an Imaging Observatory (STUDIO) is a balloon-borne platform and mission carrying an imaging micro-channel plate (MCP) detector on a 0.5 m aperture telescope. STUDIO is currently planned to fly during the summer turnaround conditions over Esrange, Sweden, in the 2022 season. For details on the ultraviolet (UV) detector, see the contribution of Conti et al. to this symposium. The scientific goal of the mission is to survey for variable hot compact stars and flaring M-dwarf stars within the galactic plane. At the same time, the mission acts as a demonstrator for a versatile and scalable astronomical balloon platform as well as for the aforementioned MCP instrument. The gondola is designed to allow the use of different instruments or telescopes. Furthermore, it is designed to serve for several, also longer, flights, which are envisioned under the European Stratospheric Balloon Observatory (ESBO) initiative. In this paper, we present the design and current status of manufacturing and testing of the STUDIO platform. We furthermore present the current plans for the flight and observations from Esrange.

astro-ph.IM

Planck pre-launch status: calibration of the Low Frequency Instrument flight model radiometers

The Low Frequency Instrument (LFI) on-board the ESA Planck satellite carries eleven radiometer subsystems, called Radiometer Chain Assemblies (RCAs), each composed of a pair of pseudo-correlation receivers. We describe the on-ground calibration campaign performed to qualify the flight model RCAs and to measure their pre-launch performances. Each RCA was calibrated in a dedicated flight-like cryogenic environment with the radiometer front-end cooled to 20K and the back-end at 300K, and with an external input load cooled to 4K. A matched load simulating a blackbody at different temperatures was placed in front of the sky horn to derive basic radiometer properties such as noise temperature, gain, and noise performance, e.g. 1/f noise. The spectral response of each detector was measured as was their susceptibility to thermal variation. All eleven LFI RCAs were calibrated. Instrumental parameters measured in these tests, such as noise temperature, bandwidth, radiometer isolation, and linearity, provide essential inputs to the Planck-LFI data analysis.

astro-ph.IM

Wall slip, shear banding, and instability in the flow of a triblock copolymer micellar solution

The shear flow of a triblock copolymer micellar solution (PEO--PPO--PEO Pluronic P84 in brine) is investigated using simultaneous rheological and velocity profile measurements in the concentric cylinder geometry. We focus on two different temperatures below and above the transition temperature $T_c$ which was previously associated with the apparition of a stress plateau in the flow curve. (i) At $T=37.0^\circ$C $ T_c$, the stress plateau is shown to correspond to stationary shear-banded states characterized by two high shear rate bands close to the walls and a very weakly sheared central band, together with large slip velocities at the rotor. In both cases, the high shear branch of the flow curve is characterized by flow instability. Interpretations of wall slip, three-band structure, and instability are proposed in light of recent theoretical models and experiments.

cond-mat.soft

Shear-induced fractures and three-dimensional motions in an organogel

The flow behavior of a viscoelastic organogel is investigated using ultrasonic velocimetry combined with rheometry. Our gel presents a decreasing flow curve, i.e., the measured stress decreases as a function of the applied shear rate. Strikingly, we note that the local flow curve calculated from the velocity profiles also exhibits a decreasing part. We attribute this regime to the presence of a fracturing process and three-dimensional motions in the bulk of the sample.

cond-mat.soft

The Large APEX Bolometer Camera LABOCA

The Large APEX Bolometer Camera, LABOCA, has been commissioned for operation as a new facility instrument t the Atacama Pathfinder Experiment 12m submillimeter telescope. This new 295-bolometer total power camera, operating in the 870 micron atmospheric window, combined with the high efficiency of APEX and the excellent atmospheric transmission at the site, offers unprecedented capability in mapping submillimeter continuum emission for a wide range of astronomical purposes.

astro-ph.IM

Microfluidic velocimetry reveals spatial cooperativity in soft glassy flows

Amorphous glassy materials of diverse nature -- concentrated emulsions, granular materials, pastes, molecular glasses -- display complex flow properties, intermediate between solid and liquid, which are at the root of their use in many applications. A classical feature, well documented yet not really understood, is the very non-linear nature of the flow rule relating stresses and strain rates. Using a microfluidic velocimetry technique, we characterize the flow of thin layers of concentrated emulsions, confined in gaps of different thicknesses by surfaces of different roughness. Beyond the classical non-linearities of the rheological behaviour, we evidence finite size effects in the flow behaviour and the absence of an intrinsic local flow rule. In contrast, a rather simple non-local flow rule is shown to account for all the velocity profiles. This non-locality of the dynamics is quantified by a length, characteristic of the cooperativity of the flow at these scales, that is unobservable in the liquid state (lower concentrations) and that increases with concentration in the jammed state. Beyond its practical importance for applications involving thin layers, e.g. coatings, our assessment of non-locality and cooperativity echoes observations on other glassy, jammed and granular systems, suggesting a possible fundamental universality.

cond-mat.mtrl-sci

Yielding and flow in adhesive and non-adhesive concentrated emulsions

The nonlinear rheological response of soft glassy materials is addressed experimentally by focusing on concentrated emulsions where interdroplet attraction is tuned through varying the surfactant content. Velocity profiles are recorded using ultrasonic velocimetry simultaneously to global rheological data in the Couette geometry. Our data show that non-adhesive and adhesive emulsions have radically different flow behaviors in the vicinity of yielding: while the flow remains homogeneous in the non-adhesive emulsion and the Herschel-Bulkley model for a yield stress fluid describes the data very accurately, the adhesive system displays shear localization and does not follow a simple constitutive equation, suggesting that the mechanisms involved in yielding transitions are not universal.

cond-mat.soft

Spatio-temporal dynamics of wormlike micelles under shear

Velocity profiles in a wormlike micelle solution (CTAB in D2O) are recorded using ultrasound every 2 s after a step-like shear rate into the shear-banding regime. The stress relaxation occurs over more than six hours and corresponds to the very slow nucleation and growth of the high-shear band. Moreover, oscillations of the interface position with a period of about 50 s are observed during the growth process. Strong wall slip, metastable states and transient nucleation of three-band flows are also reported and discussed in light of previous experiments and theoretical models.

cond-mat.soft

High-frequency ultrasonic speckle velocimetry in sheared complex fluids

High-frequency ultrasonic pulses at 36 MHz are used to measure velocity profiles in a complex fluid sheared in the Couette geometry. Our technique is based on time-domain cross-correlation of ultrasonic speckle signals backscattered by the moving medium. Post-processing of acoustic data allows us to record a velocity profile in 0.02--2 s with a spatial resolution of 40 $μ$m over 1 mm. After a careful calibration using a Newtonian suspension, the technique is applied to a sheared lyotropic lamellar phase seeded with polystyrene spheres of diameter 3--10 $μ$m. Time-averaged velocity profiles reveal the existence of inhomogeneous flows, with both wall slip and shear bands, in the vicinity of a shear-induced ``layering'' transition. Slow transient regimes and/or temporal fluctuations can also be resolved and exhibit complex spatio-temporal flow behaviors with sometimes more than two shear bands.

cond-mat.soft

Shear-banding in a lyotropic lamellar phase, Part 1: Time-averaged velocity profiles

Using velocity profile measurements based on dynamic light scattering and coupled to structural and rheological measurements in a Couette cell, we present evidences for a shear-banding scenario in the shear flow of the onion texture of a lyotropic lamellar phase. Time-averaged measurements clearly show the presence of structural shear-banding in the vicinity of a shear-induced transition, associated to the nucleation and growth of a highly sheared band in the flow. Our experiments also reveal the presence of slip at the walls of the Couette cell. Using a simple mechanical approach, we demonstrate that our data confirms the classical assumption of the shear-banding picture, in which the interface between bands lies at a given stress $σ^\star$. We also outline the presence of large temporal fluctuations of the flow field, which are the subject of the second part of this paper [Salmon {\it et al.}, submitted to Phys. Rev. E].

cond-mat.soft

Shear-banding in a lyotropic lamellar phase, Part 2: Temporal fluctuations

We analyze the temporal fluctuations of the flow field associated to a shear-induced transition in a lyotropic lamellar phase: the layering transition of the onion texture. In the first part of this work [Salmon et al., submitted to Phys. Rev. E], we have evidenced banded flows at the onset of this shear-induced transition which are well accounted for by the classical picture of shear-banding. In the present paper, we focus on the temporal fluctuations of the flow field recorded in the coexistence domain. These striking dynamics are very slow (100--1000s) and cannot be due to external mechanical noise. Using velocimetry coupled to structural measurements, we show that these fluctuations are due to a motion of the interface separating the two differently sheared bands. Such a motion seems to be governed by the fluctuations of $σ^\star$, the local stress at the interface between the two bands. Our results thus provide more evidence for the relevance of the classical mechanical approach of shear-banding even if the mechanism leading to the fluctuations of $σ^\star$ remains unclear.

cond-mat.soft

Dynamical behavior of a complex fluid near an out-of-equilibrium transition: approaching simple rheological chaos

We report here an extensive study of sustained oscillations of the viscosity of a complex fluid near an out-of-equilibrium transition. Using well defined protocols, we perform rheological measurements of the onion texture near a layering transition in a Couette flow. This complex fluid exhibits sustained oscillations of the viscosity, on a large time scale (500s) at controlled stress. These oscillations are directly correlated to an oscillating microstrutural change of the texture of the fluid. We observe a great diversity of dynamical behavior and we show that there is a coupling with spatial effects in the gradient v direction. This is in agreement with a carefull analysis of the temporal series of the viscosity with the dynamical system theory. This analysis indicates that the observed dynamical responses do not strictly correspond to 3-dimensional chaotic states, probably because some spatio-temporal effects are present and are likely to play an important role.

cond-mat.soft