arXiv subjects

A. Carpio

Publications and source records attributed to A. Carpio.

At least 19 recordsLinked to original sources

arXiv2025

Processing the 2D and 3D Fresnel experimental databases via topological derivative methods

This paper presents reconstructions of homogeneous targets from the 2D and 3D Fresnel databases by one-step imaging methods based on the computation of topological derivative and topological energy fields. The electromagnetic inverse scattering problem is recast as a constrained optimization problem, in which we seek to minimize the error when comparing experimental microwave measurements with computer-generated synthetic data for arbitrary targets by approximating a Maxwell forward model. The true targets are then characterized by combining the topological derivatives or energies of such shape functionals for all available receivers and emitters at different frequencies. Our approximations are comparable to the best approximations already obtained by other methods. However, these topological fields admit easy to evaluate closed-form expressions, which speeds up the process.

math.AP↗

arXiv2023

Scale free chaos in the confined Vicsek flocking model

The Vicsek model encompasses the paradigm of active dry matter. Motivated by collective behavior of insects in swarms, we have studied finite size effects and criticality in the three dimensional, harmonically confined Vicsek model. We have discovered a phase transition that exists for appropriate noise and small confinement strength. On the critical line of confinement versus noise, swarms are in a state of scale-free chaos characterized by minimal correlation time, correlation length proportional to swarm size and topological data analysis. The critical line separates dispersed single clusters from confined multicluster swarms. Scale-free chaotic swarms occupy a compact region of space and comprise a recognizable `condensed' nucleus and particles leaving and entering it. Susceptibility, correlation length, dynamic correlation function and largest Lyapunov exponent obey power laws. The critical line and a narrow criticality region close to it move simultaneously to zero confinement strength for infinitely many particles. At the end of the first chaotic window of confinement, there is another phase transition to infinitely dense clusters of finite size that may be termed flocking black holes.

cond-mat.stat-mech↗

arXiv2021

Uncertainty quantification in covid-19 spread: lockdown effects

We develop a Bayesian inference framework to quantify uncertainties in epidemiological models. We use SEIJR and SIJR models involving populations of susceptible, exposed, infective, diagnosed, dead and recovered individuals to infer from covid-19 data rate constants, as well as their variations in response to lockdown measures. To account for confinement, we distinguish two susceptible populations at different risk: confined and unconfined. We show that transmission and recovery rates within them vary in response to facts. A key unknown to predict the evolution of the epidemic is the fraction of the population affected by the virus, including asymptomatic subjects. Our study tracks its time evolution with quantified uncertainty from available official data from the onset of the epidemic, limited, however, by the data quality. We exemplify the technique with data from Spain, country in which late drastic lockdowns were enforced for months. In late actions and in the absence of other measures, spread is delayed but not stopped unless a large enough fraction of the population is confined until the asymptomatic population is depleted. To some extent, confinement could be replaced by strong distancing through masks in adequate circumstances.

q-bio.PE↗

arXiv2020

Positivity preserving high order schemes for angiogenesis models

Hypoxy induced angiogenesis processes can be described coupling an integrodifferential kinetic equation of Fokker-Planck type with a diffusion equation for the angiogenic factor. We propose high order positivity preserving schemes to approximate the marginal tip density by combining an asymptotic reduction with weighted essentially non oscillatory and strong stability preserving time discretization. We show that soliton-like solutions representing blood vessel formation and spread towards hypoxic regions are captured.

math.NA↗

arXiv2020

Tracking collective cell motion by topological data analysis

By modifying and calibrating an active vertex model to experiments, we have simulated numerically a confluent cellular monolayer spreading on an empty space and the collision of two monolayers of different cells in an antagonistic migration assay. Cells are subject to inertial forces and to active forces that try to align their velocities with those of neighboring ones. In agreement with experiments, spreading tests exhibit finger formation in the moving interfaces, swirls in the velocity field, and the polar order parameter and correlation and swirl lengths increase with time. Cells inside the tissue have smaller area than those at the interface, as observed in recent experiments. In antagonistic migration assays, a population of fluidlike Ras cells invades a population of wild type solidlike cells having shape parameters above and below the geometric critical value, respectively. Cell mixing or segregation depends on the junction tensions between different cells. We reproduce experimentally observed antagonistic migration assays by assuming that a fraction of cells favor mixing, the others segregation, and that these cells are randomly distributed in space. To characterize and compare the structure of interfaces between cell types or of interfaces of spreading cellular monolayers in an automatic manner, we apply topological data analysis to experimental data and to numerical simulations. We use time series of numerical simulation data to automatically group, track and classify advancing interfaces of cellular aggregates by means of bottleneck or Wasserstein distances of persistent homologies. These topological data analysis techniques are scalable and could be used in studies involving large amounts of data. Besides applications to wound healing and metastatic cancer, these studies are relevant for tissue engineering, biological effects of materials, tissue and organ regeneration.

cond-mat.soft↗

arXiv2020

Clustering methods and Bayesian inference for the analysis of the evolution of immune disorders

Choosing appropriate hyperparameters for unsupervised clustering algorithms in an optimal way depending on the problem under study is a long standing challenge, which we tackle while adapting clustering algorithms for immune disorder diagnoses. We compare the potential ability of unsupervised clustering algorithms to detect disease flares and remission periods through analysis of laboratory data from systemic lupus erythematosus patients records with different hyperparameter choices. To determine which clustering strategy is the best one we resort to a Bayesian analysis based on the Plackett-Luce model applied to rankings. This analysis quantifies the uncertainty in the choice of clustering methods for a given problem

q-bio.QM↗

arXiv2019

When topological derivatives met regularized Gauss-Newton iterations in holographic 3D imaging

We propose an automatic algorithm for 3D inverse electromagnetic scattering based on the combination of topological derivatives and regularized Gauss-Newton iterations. The algorithm is adapted to decoding digital holograms. A hologram is a two-dimensional light interference pattern that encodes information about three-dimensional shapes and their optical properties. The formation of the hologram is modeled using Maxwell theory for light scattering by particles. We then seek shapes optimizing error functionals which measure the deviation from the recorded holograms. Their topological derivatives provide initial guesses of the objects. Next, we correct these predictions by regularized Gauss-Newton techniques. In contrast to standard Gauss-Newton methods, in our implementation the number of objects can be automatically updated during the iterative procedure by new topological derivative computations. We show that the combined use of topological derivative based optimization and iteratively regularized Gauss-Newton methods produces fast and accurate descriptions of the geometry of objects formed by multiple components with nanoscale resolution, even for a small number of detectors and non convex components aligned in the incidence direction. The method could be applied in general imaging set-ups involving other waves (microwave imaging, elastography...) provided closed-form expressions for the topological and Frechet derivatives are determined.

physics.optics↗

arXiv2018

Optimization methods for in-line holography

We present a procedure to reconstruct objects from holograms recorded in in-line holography settings. Working with one beam of polarized light, the topological derivatives and energies of functionals quantifying hologram deviations yield predictions of the number, location, shape and size of objects with nanometer resolution. When the permittivity of the objects is unknown, we approximate it by parameter optimization techniques. Iterative procedures combining topological field based geometry corrections and parameter optimization sharpen the initial predictions. Additionally, we devise a strategy which exploits the measured holograms to produce numerical approximations of the full electric field (amplitude and phase) at the screen where the hologram is recorded. Shape and parameter optimization of functionals employing such approximations of the electric field also yield images of the holographied objects.

physics.optics↗

arXiv2016

Noninvasive imaging of three dimensional micro and nanostructures by topological methods

We present topological derivative and energy based procedures for the imaging of micro and nanostructures using one beam of visible light of a single wavelength. Objects with diameters as small as 10 nm can be located, and their position tracked with nanometer precision. Multiple objects distributed either on planes perpendicular to the incidence direction or along axial lines in the incidence direction are distinguishable. More precisely, the shape and size of plane sections perpendicular to the incidence direction can be clearly determined, even for asymmetric and non-convex scatterers. Axial resolution improves as the size of the objects decreases. Initial reconstructions may proceed by glueing together 2D horizontal slices between axial peaks or by locating objects at 3D peaks of topological energies, depending on the effective wavenumber. Below a threshold size, topological derivative based iterative schemes improve initial predictions of the location, size and shape of objects by postprocessing fixed measured data. For larger sizes, tracking the peaks of topological energy fields that average information from additional incident light beams seems to be more effective.

physics.bio-ph↗

arXiv2015

Measuring strain and rotation fields at the dislocation core in graphene

Strain fields, dislocations and defects may be used to control electronic properties of graphene. By using advanced imaging techniques with high-resolution transmission electron microscopes, we have measured the strain and rotation fields about dislocations in monolayer graphene with single-atom sensitivity. These fields differ qualitatively from those given by conventional linear elasticity. However, atom positions calculated from two dimensional (2D) discrete elasticity and three dimensional discrete periodized Föppl-von Kármán equations (dpFvKEs) yield fields close to experiments when determined by geometric phase analysis. 2D theories produce symmetric fields whereas those from experiments exhibit asymmetries. Numerical solutions of dpFvKEs provide strain and rotation fields of dislocation dipoles and pairs that also exhibit asymmetries and, compared with experiments, may yield information on out-of-plane displacements of atoms. While discrete theories need to be solved numerically, analytical formulas for strains and rotation about dislocations can be obtained from 2D Mindlin's hyperstress theory. These formulas are very useful for fitting experimental data and provide a template to ascertain the importance of nonlinear and nonplanar effects. Measuring the parameters of this theory, we find two characteristic lengths between three and four times the lattice spacings that control dilatation and rotation about a dislocation. At larger distances from the dislocation core, the elastic fields decay to those of conventional elasticity. Our results may be relevant for strain engineering in graphene and other 2D materials of current interest.

cond-mat.mes-hall↗

arXiv2015

Theory of force-extension curve for modular proteins and DNA hairpins

We study a model describing the force-extension curves of modular proteins, nucleic acids, and other biomolecules made out of several single units or modules. At a mesoscopic level of description, the configuration of the system is given by the elongations of each of the units. The system free energy includes a double-well potential for each unit and an elastic nearest neighbor interaction between them. Minimizing the free energy yields the system equilibrium properties whereas its dynamics is given by (overdamped) Langevin equations for the elongations, in which friction and noise amplitude are related by the fluctuation-dissipation theorem. Our results, both for the equilibrium and the dynamical situations, include analytical and numerical descriptions of the system force-extension curves under force or length control, and agree very well with actual experiments in biomolecules. Our conclusions also apply to other physical systems comprising a number of metastable units, such as storage systems or semiconductor superlattices.

cond-mat.stat-mech↗

arXiv2015

Differential growth of wrinkled biofilms

Biofilms are antibiotic-resistant bacterial aggregates that grow on moist surfaces and can trigger hospital-acquired infections. They provide a classical example in biology where the dynamics of cellular communities may be observed and studied. Gene expression regulates cell division and differentiation, which affect the biofilm architecture. Mechanical and chemical processes shape the resulting structure. We gain insight into the interplay between cellular and mechanical processes during biofilm development on air-agar interfaces by means of a hybrid model. Cellular behavior is governed by stochastic rules informed by a cascade of concentration fields for nutrients, waste and autoinducers. Cellular differentiation and death alter the structure and the mechanical properties of the biofilm, which is deformed according to Foppl-Von Karman equations informed by cellular processes and the interaction with the substratum. Stiffness gradients due to growth and swelling produce wrinkle branching. We are able to reproduce wrinkled structures often formed by biofilms on air-agar interfaces, as well as spatial distributions of differentiated cells commonly observed with B. subtilis.

physics.bio-ph↗

arXiv2014

Protein unfolding and refolding as transitions through virtual states

Single-molecule atomic force spectroscopy probes elastic properties of titin, ubiquitin and other relevant proteins. We explain bioprotein folding dynamics under both length- and force-clamp by modeling polyprotein modules as particles in a bistable potential, weakly connected by harmonic spring linkers. Multistability of equilibrium extensions provides the characteristic sawtooth force-extension curve. We show that abrupt or stepwise unfolding and refolding under force-clamp conditions involve transitions through virtual states (which are quasi-stationary domain configurations) modified by thermal noise. These predictions agree with experimental observations.

cond-mat.stat-mech↗

arXiv2013

Sawtooth patterns in biomolecules force-extension curves: an equilibrium-statistical-mechanics theory

We analyze the force-extension curve for a general class of systems, which are described at the mesoscopic level by a free energy depending on the extension of its components. Similarly to what is done in real experiments, the total length of the system is the controlled parameter. This imposes a global constraint in the minimization procedure leading to the equilibrium values of the extensions. As a consequence, the force-extension curve has multiple branches in a certain range of forces. The stability of these branches is governed by the free energy: there are a series of first-order phase transitions at certain values of the total length, in which the free energy itself is continuous but its first derivative, the force, has a finite jump. This behavior is completely similar to the one observed in real experiments with biomolecules like proteins, and other complex systems.

physics.bio-ph↗

arXiv2012

Ripples in a graphene membrane coupled to Glauber spins

We propose a theory of ripples in suspended graphene sheets based on two-dimensional elasticity equations that are made discrete on the honeycomb lattice and then periodized. At each point carbon atoms are coupled to Ising spins whose values indicate the atoms local trend to move vertically off-plane. The Ising spins are in contact with a thermal bath and evolve according to Glauber dynamics. In the limit of slow spin flip compared to membrane vibrations, ripples with no preferred orientation appear as long-lived metastable states for any temperature. Numerical solutions confirm this picture.

cond-mat.mes-hall↗

arXiv2012

Model of ripples in graphene

We propose a model of ripples in suspended graphene sheets based on plate equations that are made discrete with the periodicity of the honeycomb lattice and then periodized. In addition, the equation for the displacements with respect to the planar configuration contains a double-well site potential, a nonlinear friction and a multiplicative white noise term satisfying the fluctuation-dissipation theorem. The nonlinear friction terms agree with those proposed by Eichler et al [Nature Nanotech. {\bf 6}, 339 (2011)] to explain their experiments with a graphene resonator. The site double-well potential indicates that the carbon atoms at each lattice point have equal probability to move upward or downward off-plane. For the considered parameter values, the relaxation time due to friction is much larger than the periods of membrane vibrations and the noise is quite small. Then ripples with no preferred orientation appear as long-lived metastable states for any temperature. Numerical solutions confirm this picture.

cond-mat.mes-hall↗

arXiv2012

Strain and rotation fields of dislocations in graphene

Strain and rotation fields of dislocations in monolayer graphene have been mapped in a recent experiment. These fields are finite everywhere and differ from those given by linear elasticity which does not consider rotation explicitly and predicts infinite rotation and strains at the dislocation point. A derivative regularization of two-dimensional linear elasticity fixes these shortcomings. The theory adds rotation, dislocation and residual strain energies to the usual elastic energy. There are two extra material constants that determine the size of the dislocation core and are determined from experimental data. These findings are useful for studies of dislocations in graphene and for analyzing incipient plasticity in two dimensional crystals.

cond-mat.mes-hall↗

arXiv2012

Spin-oscillator model for DNA/RNA unzipping by mechanical force

We model unzipping of DNA/RNA molecules subject to an external force by a spin-oscillator system. The system comprises a macroscopic degree of freedom, represented by a one-dimensional oscillator, and internal degrees of freedom, represented by Glauber spins with nearest-neighbor interaction and a coupling constant proportional to the oscillator position. At a critical value $F_c$ of an applied external force $F$, the oscillator rest position (order parameter) changes abruptly and the system undergoes a first-order phase transition. When the external force is cycled at different rates, the extension given by the oscillator position exhibits a hysteresis cycle at high loading rates whereas it moves reversibly over the equilibrium force-extension curve at very low loading rates. Under constant force, the logarithm of the residence time at the stable and metastable oscillator rest position is proportional to $(F-F_c)$ as in an Arrhenius law.

cond-mat.stat-mech↗