arXiv subjects

A. Bortone

Publications and source records attributed to A. Bortone.

582 records · Page 33Linked to original sources

arXiv2020

Time performance of a triple-GEM detector at high rate

Gaseous detectors are used in high energy physics as trackers or, more generally, as devices for the measurement of the particle position. For this reason, they must provide high spatial resolution and they have to be able to operate in regions of intense radiation, i.e. around the interaction point of collider machines. Among these, Micro Pattern Gaseous Detectors (MPGD) are the latest frontier and allow to overcome many limitations of the pre-existing detectors, such as the radiation tolerance and the rate capability. The gas Electron Multiplier (GEM) is a MPGD that exploits an intense electric field in a reduced amplification region in order to prevent discharges. Several amplification stages, like in a triple-GEM, allow to increase the detector gain and to reduce the discharge probability. Reconstruction techniques such as charge centroid (CC) and micro-Time Projection Chamber ($\upmu$TPC) are used to perform the position measurement. From literature triple-GEMs show a stable behaviour up to $10^8\,$Hz/cm$^2$. A testbeam with four planar triple-GEMs has been performed at the Mainz Microtron (MAMI) facility and their performance was evaluated in different beam conditions. In this article a focus on the time performance for the $\upmu$TPC clusterization is given and a new measurement of the triple-GEM limits at high rate will be presented.

physics.ins-det↗

arXiv2020

Observation of the $Y(4220)$ and $Y(4360)$ in the process $e^{+}e^{-} \to ηJ/ψ$

The cross sections of the process $e^{+}e^{-} \to ηJ/ψ$ at center-of-mass energies ($\sqrt{s}$) between 3.81 and 4.60 GeV are measured with high precision by using data samples collected with the BESIII detector operating at the BEPCII storage ring. Three structures are observed by analyzing the lineshape of the measured cross sections, and a maximum-likelihood fit including three resonances is performed by assuming the lowest lying structure is the $ψ(4040)$. For the other resonances, we obtain masses of $(4218.7 \pm 4.0 \pm 2.5)$ and $(4380.4 \pm 14.2 \pm 1.8)$ MeV/c$^{2}$ with corresponding widths of $(82.5 \pm 5.9 \pm 0.5)$ and $(147.0 \pm 63.0 \pm 25.8)$ MeV, respectively, where the first uncertainties are statistical and the second ones systematic. The measured resonant parameters are consistent with those of the $Y(4220)$ and $Y(4360)$ from pr evious measurements of different final states. For the first time, we observe the decays of the $Y(4220)$ and $Y(4360)$ into $ηJ/ψ$ final states.

hep-ex↗

arXiv2019

Search for the decay $D_{s}^{+} \to p\bar{p}e^{+}ν_{e}$

Using a $3.19~\mathrm{fb}^{-1}$ data sample collected at the $\sqrt{s}~=~4.178$ GeV with the BESIII detector, we search for the rare decay $D_{s}^{+} \rightarrow p \bar{p} e^{+} ν_{e} $. No significant signal is observed, and an upper limit of $\mathcal{B}(D_{s}^{+} \rightarrow p \bar{p} e^{+} ν_{e}) < 2.0 \times 10^{-4}$ is set at the 90\% confidence level. This measurement is useful input in understanding the baryonic transition of $D_{s}^{+}$ mesons.

hep-ex↗

arXiv2019

Triple GEM performance in magnetic field

Performance of triple GEM prototypes in strong magnetic field has been evaluated bymeans of a muon beam at the H4 line of the SPS test area at CERN. Data have been reconstructedand analyzed offline with two reconstruction methods: the charge centroid and the micro-Time-Projection-Chamber exploiting the charge and the time measurement respectively. A combinationof the two reconstruction methods is capable to guarantee a spatial resolution better than 150μmin magnetic field up to a 1 T.

physics.ins-det↗

arXiv2019

GRAAL: Gem Reconstruction And Analysis Library

MPGD are the new frontier in gas trackers. Among this kind of devices, theGEM chambers are widely used. The experimental signals acquired with the detector mustobviously be reconstructed and analysed. In this contribution, a new offline software to performreconstruction, alignment and analysis on the data collected with APV-25 and TIGER ASICswill be presented. GRAAL (Gem Reconstruction And Analysis Library) is able to measurethe performance of a MPGD detector with a strip segmented anode (presently). The code isdivided in three parts: reconstruction, where the hits are digitized and clusterized; tracking,where a procedure fits the points from the tracking system and uses that information to align thechamber with rotations and shifts; analysis, where the performance is evaluated (e.g. efficiency,spatial resolution,etc.). The user must set the geometry of the setup and then the programreturns automatically the analysis results, taking care of different conditions of gas mixture,electric field, magnetic field, geometries, strip orientation, dead strip, misalignment and manyothers.

physics.ins-det↗

arXiv2019

A fast and parametric digitization for triple-GEM detectors

Triple-GEM detectors are a well known technology in high energy physics. In order to have a complete understanding of their behavior, in parallel with on beam testing, a Monte Carlo code has to be developed to simulate their response to the passage of particles. The software must take into account all the physical processes involved from the primary ionization up to the signal formation, e.g. the avalanche multiplication and the effect of the diffusion on the electrons. In the case of gas detectors, existing software such as Garfield already perform a very detailed simulation but are CPU time consuming. A description of a reliable but faster simulation is presented here: it uses a parametric description of the variables of interest obtained by suitable preliminary Garfield simulations and tuned to the test beam data. It can reproduce the real values of the charge measured by the strip, needed to reconstruct the position with the Charge Centroid method. In addition, particular attention was put to the simulation of the timing information, which permits to apply also the micro-Time Projection Chamber position reconstruction, for the first time on a triple-GEM. A comparison between simulation and experimental values of some sentinel variables in different conditions of magnetic field, high voltage settings and incident angle will be shown.

physics.ins-det↗