arXiv Science⌕ Search

arXiv subjects

A. Bonatto

Publications and source records attributed to A. Bonatto.

4 recordsLinked to original sources

Bayesian optimization of longitudinally aligned CNT targets for 800 nm laser wakefield acceleration in the bubble regime

Laser wakefield acceleration (LWFA) in solid-density plasmas can reach accelerating gradients in the TeV/m range, well above those of gaseous media, provided the driver is matched to the plasma. In nanostructured solids, this matching can be achieved by controlling the spacing between the nanostructures to reduce the effective density, enabling infrared pulses to excite wakefields in the bubble regime. Following numerical demonstrations with carbon nanotube (CNT) bundles on concentric cylindrical shells, a simpler, experimentally more accessible longitudinally aligned CNT (LA-CNT) target is investigated here, with the bundles on a triangular lattice within a square cross section and an optional central aperture. Three-dimensional particle-in-cell simulations are coupled with Bayesian optimization to vary the effective density, target length, bundle radius and aperture radius for a fixed 100 mJ, few-cycle, 800 nm laser pulse, maximizing the laser-to-beam energy conversion efficiency for electrons above 20 MeV. With the aperture radius constrained to at least 0.5 $μ$m, the best target operates in the bubble regime and reaches an efficiency of 24.6%, delivering a 673 pC bunch with a mean energy of 36.6 MeV and a quasi-monoenergetic peak near 46 MeV, against 19% for the concentric-shell target under identical conditions. When the aperture is allowed to vanish, the optimization converges to denser and shorter targets, the efficiency peaks at 25.8%, and the best configurations deliver a higher charge at the cost of a lower peak energy and about 50% larger divergence; aperture-free targets among them retain a mean efficiency of 24.1%. The optimized targets are robust to random bundle displacements that preserve the effective density. By eliminating the need to pattern a micrometre-scale opening, aperture-free targets may facilitate proof-of-principle experiments on solid-state LWFA.

physics.plasm-ph↗

Bayesian optimization of laser wakefield acceleration in the self-modulated regime (SM-LWFA) aiming to produce molybdenum-99 via photonuclear reactions

While laser wakefield acceleration (LWFA) in the bubble regime demands ultra-short, high-peak-power laser pulses, operation in the self-modulated regime (SM-LWFA) works with more relaxed pulse conditions, albeit at the cost of lower beam quality. Modern laser systems can deliver pulses with durations of a few tens of femtoseconds and peak powers on the order of a few terawatts, at kHz repetition rates. These systems are well-suited for developing SM-LWFA applications where high average energy and charge are prioritized over beam quality. Such beams could be used to generate high-energy bremsstrahlung photons, capable of triggering photonuclear reactions to produce radioisotopes like molybdenum-99. This isotope decays into technetium-99m, the most widely used medical radioisotope, with over 30 million applications worldwide per year. This work explores the use of Bayesian optimization to maximize the energy and charge of electron beams accelerated via SM-LWFA. Particle-in-cell (PIC) simulations model a 5 TW, 15 fs-long Gaussian laser pulse, propagating through tailored hydrogen gas-density profiles. In these simulations, over multiple iterations, the algorithm optimizes a set of input parameters characterizing the gas-density profile and the laser focal position. Three distinct profiles, with total lengths ranging from 200 to 400 micrometers and combining ramps and plateaus, were investigated. Optimal configurations were found to produce electron beams with median energies ranging from 14 to 17 MeV and charges of 600 to 1300 pC, considering electrons with energies above 8 MeV. Preliminary estimates of the molybdenum-99 yields for the optimal beams were obtained by employing their phase spaces, retrieved from PIC simulations, as radiation source inputs in Monte Carlo simulations irradiating a combined tantalum and molybdenum target.

physics.acc-ph↗

Excitation of wakefields in carbon nanotubes: a hydrodynamic model approach

The interactions of charged particles with carbon nanotubes may excite electromagnetic modes in the electron gas produced in the cylindrical graphene shell constituting the nanotube wall. This wake effect has recently been proposed as a potential novel method of short-wavelength high-gradient particle acceleration. In this work, the excitation of these wakefields is studied by means of the linearized hydrodynamic model. In this model, the electronic excitations on the nanotube surface are described treating the electron gas as a 2D plasma with additional contributions to the fluid momentum equation from specific solid-state properties of the gas. General expressions are derived for the excited longitudinal and transverse wakefields. Numerical results are obtained for a charged particle moving within a carbon nanotube, paraxially to its axis, showing how the wakefield is affected by parameters such as the particle velocity and its radial position, the nanotube radius, and a friction factor, which can be used as a phenomenological parameter to describe effects from the ionic lattice. Assuming a particle driver propagating on axis at a given velocity, optimal parameters were obtained to maximize the longitudinal wakefield amplitude.

physics.acc-ph↗

Exploring ultra-high-intensity wakefields in carbon nanotube arrays: an effective plasma-density approach

Charged particle acceleration using solid-state nanostructures has attracted attention in recent years as a method of achieving ultra-high-gradient acceleration in the TV/m domain. More concretely, metallic hollow nanostructures could be suitable for particle acceleration through the excitation of wakefields by a laser or a high-intensity charged particle beam in a high-density solid-state plasma. For instance, due to their special channelling properties as well as optoelectronic and thermo-mechanical properties, carbon nanotubes could be an excellent medium for this purpose. This article investigates the feasibility of generating ultra-high gradient acceleration using carbon nanotube arrays, modelled as solid-state plasmas in conventional particle-in-cell simulations performed in a two-dimensional axisymmetric quasi}-3D geometry. The generation of beam-driven plasma wakefields depending on different parameters of the solid structure is discussed in detail. Furthermore, by adopting an effective plasma-density approach, existing analytical expressions, originally derived for homogeneous plasmas, can be used to describe wakefields driven in periodic non-uniform plasmas.

physics.plasm-ph↗