arXiv subjects

Özlem Tuğfe Demir

Publications and source records attributed to Özlem Tuğfe Demir.

At least 19 recordsLinked to original sources

arXiv2026

Fundamentals of Energy-Efficient Hardware Configurations for Wireless Links with Sleep Modes

In this paper, we examine the energy efficiency (EE) of a base station (BS) with multiple antennas. We use a state-of-the-art power consumption (PC) model that captures the passive and active parts of the transceiver circuitry, including the effects of radiated power, signal processing, and passive consumption. The paper treats the transmit power, bandwidth, and number of antennas as the optimization variables. We provide novel closed-form solutions for the optimal ratios of power per unit bandwidth and power per transmit antenna, and discover a new relationship in which the radiated power equals the total transceiver power at the EE-optimal operating point. A central finding is that the EE-optimal signal-to-noise ratio (SNR) collapses to a universal numerical constant of approximately 5.93 dB, independent of channel and hardware parameters. We present an algorithm that jointly optimizes the three design variables to achieve maximum EE under practical constraints, and provide analytical insight into whether maximum power or maximum bandwidth is optimal and how many antennas a BS should utilize. We further extend the optimization framework to incorporate quality-of-service (QoS) requirements and three advanced sleep modes of varying depth: absolute sleep, deep sleep, and idle mode. We characterize the optimal hardware configuration for each mode and determine when the rush-to-sleep strategy, which transmits briefly at the EE-optimal active configuration and sleeps the rest of the time, is optimal. Incorporating wake-up transition delays, we reveal how latency constraints and sleep-mode-specific transition times jointly dictate the optimal sleep mode for data packets with absolute deadlines. Together, these results indicate that energy-efficient operation requires treating transmission and sleep as a single coupled optimization.

cs.IT↗

arXiv2026

Green Cell-Free Massive MIMO for ISAC: Joint Cloud, Fronthaul and Radio Resource Allocation

In this paper, we develop a cross-layer end-to-end (E2E) resource orchestration framework for green CF-mMIMO ISAC systems with distributed multi-target detection. We propose a distributed sensing approach in which receive access points (RX-APs) compute local test statistics, which are aggregated at the cloud using weights based on sensing interference and channel quality. We derive the local maximum a posteriori ratio test (MAPRT) detectors under fully informed (FIS) and partially informed (PIS) operation, representing different levels of transmit-signal information at the RX-APs. We further characterize their processing and fronthaul requirements and derive a network power model incorporating radio transmission, AP and cloud processing, and fronthaul infrastructure. We formulate a mixed-integer non-convex problem that jointly optimizes transmit powers, AP modes, UE and sensing-area associations, RX-AP assignments, and active fronthaul and cloud resources subject to communication, sensing, power, processing-capacity, and fronthaul constraints. A two-stage iterative algorithm based on Big-M reformulation, convex--concave programming, penalty-based relaxation, and structured discrete recovery is developed. Numerical results show that the proposed E2E framework reduces total power by up to 50% compared with transmit-power-only optimization and by approximately 11-17% compared with joint radio optimization under full coordination, while maintaining detection probabilities above 0.95. The results also reveal a fundamental implementation trade-off: FIS provides lower detector-processing complexity and higher detection performance, whereas PIS substantially reduces fronthaul requirements.

cs.IT↗

arXiv2026

Joint Quantized Precoding and Bit Allocation for Fronthaul-Constrained Cell-Free Massive MIMO

We study quantization-aware precoding for the downlink of cell-free massive MIMO systems with limited-resolution fronthaul. In such systems, the centrally designed precoder must be quantized before being conveyed to distributed access points (APs), creating a strong coupling between precoder design and fronthaul compression. To capture this effect, we develop an end-to-end signal model based on Bussgang decomposition, where the quantization distortion depends explicitly on the precoder coefficients. Building on this model, we formulate a joint precoding and bit allocation problem under per-AP power constraints and a total fronthaul bit budget. We propose an efficient block coordinate descent algorithm that iteratively updates the precoder, receive scaling, and distortion levels. Numerical results demonstrate that the proposed method significantly outperforms uniform bit allocation and quantization-unaware precoding schemes, particularly in fronthaul-limited regimes.

cs.IT↗

arXiv2026

Fronthaul-Efficient Cell-Free Massive MIMO via Stream-Adaptive Resolution Control

We consider the uplink of a fronthaul-constrained cell-free massive MIMO system with a single multi-antenna user equipment (UE) transmitting multiple spatial streams to distributed access points (APs). Due to heterogeneous channel conditions and limited fronthaul capacity, uniform-resolution quantization across APs and streams is highly inefficient. To address this, we propose a stream- and AP-adaptive resolution control framework that jointly optimizes the transmit power and per-AP per-stream quantization resolutions. By leveraging a distributed implementation of singular-value decomposition (SVD)-based processing, the data streams are decoupled at the APs, enabling flexible fronthaul compression across both spatial streams and APs. The resulting non-convex optimization problem is tackled using a weighted minimum mean-squared error (WMMSE)-based block coordinate descent algorithm with semi-closed-form updates.

cs.IT↗

arXiv2026

Energy-Efficient Integrated Access and Fronthaul for Cell-Free Massive MIMO with Adaptive Quantization Resolution

Cell-free massive MIMO with wireless fronthaul is a promising architecture for energy-efficient 6G networks, but the access and fronthaul links must then share the same scarce spectrum, and, under the fully centralized (option-8) functional split, the fronthaul rate is dictated by the finite quantization resolution used at the access points (APs). This paper develops a network energy-efficiency (EE) maximization framework for the uplink of such a system, jointly optimizing the integrated access and fronthaul (IAF) resource split, the adaptive per-AP quantization resolution, and the fronthaul powers, and treating the time-division (TD) and frequency-division (FD) operating modes in a unified manner. Each AP may be switched off (put to sleep) when it is not worth activating, so the resolution allocation is inherently coupled with AP selection. The resulting mixed-integer, nonconvex fractional program is solved by an alternating-optimization algorithm with per-block optimality guarantees---a closed-form optimal time split, bandwidth bisection, and optimal per-AP bit selection---that applies verbatim to both modes. While the design relies on the tractable additive quantization noise model, the reported performance is obtained end-to-end with the actual Lloyd--Max quantizers and a Bussgang decomposition-based achievable-rate bound.

eess.SP↗

arXiv2026

Dual-polarized RIS versus dual-polarized network-controlled repeater

We study the achievable rate performance of dual-polarized passive reconfigurable intelligent surfaces (RISs) and dual-polarized network-controlled repeaters (NCRs) in a point-to-point wireless link. While RISs rely on passive beamforming with large array gains, NCRs exploit active amplification across polarization branches. We develop a unified analytical framework that captures the impact of amplification, noise propagation, and deployment geometry under different power-budget models. Closed-form rate expressions are derived, and the optimal one-stream and two-stream transmission strategies for NCRs are characterized. The results reveal that RISs are competitive in short-range scenarios and benefit from large array sizes, whereas NCRs become preferable in long-range deployments due to their ability to compensate for pathloss through amplification.

eess.SP↗

arXiv2026

Uplink Hardware Impairments in OFDM-Based Cell-Free Massive MIMO With Impaired Wireless Fronthaul

This paper studies the uplink performance of OFDM-based cell-free massive MIMO systems in the presence of hardware impairments affecting both low-cost access points and wireless fronthaul transceivers. We consider a centralized architecture with functional split option~8, where the sampled baseband signals are forwarded from the access points to the central processing unit through wireless fronthaul links operating at mmWave or sub-THz frequencies. A unified analytical framework is developed to characterize the aggregate impact of hardware distortions across the access and fronthaul links. In particular, closed-form expressions are derived for channel estimation and uplink spectral efficiency under hardware-impaired transmission and reception. To mitigate the resulting performance degradation, distortion-aware linear receive combining is considered for the wireless fronthaul. Moreover, a max-min fair resource allocation framework is developed to jointly optimize the uplink transmit powers, fronthaul transmit powers, and fronthaul time expansion factor.

eess.SP↗

arXiv2026

Energy Saving in Cell-Free Massive MIMO ISAC for Ultra-Reliable Target-Aware Actuation

Emerging 6G sensing-based applications rely on ultra-reliable target-aware actuation, where timely and accurate sensing information triggers critical actions. Achieving this requires tightly integrated sensing and communication (ISAC) under stringent reliability and latency constraints. This paper investigates ISAC in a downlink cell-free massive multiple-input multiple-output (CF-mMIMO) system supporting multi-static sensing and ultra-reliable low-latency communications (URLLC). We propose a joint power and blocklength allocation algorithm to minimize total energy consumption, accounting for both radio-site and cloud-side processing energy for communication and sensing, while meeting communication and sensing requirements. The non-convex optimization problem is solved using a combination of feasible point pursuit-successive convex approximation (FPP-SCA), concave-convex programming (CCP), and fractional programming techniques. We consider two types of target detectors: clutter-aware and clutter-unaware, each with distinct complexity and performance trade-offs. A computational complexity analysis based on giga-operations per second (GOPS) is conducted to quantify the processing requirements of communication and sensing tasks. We also introduce the refreshing rate for sensing information and derive a closed-form expression that accounts for both observation and processing delays. Simulation results show that the proposed algorithm achieves up to 34% energy reduction compared to schemes using the maximum allowable blocklength and enhances detection capability while consuming less total energy. Clutter-aware detectors, despite higher complexity, require fewer antennas and sensing receive APs, yielding up to 40% energy savings.

cs.IT↗

arXiv2026

Joint Access and Fronthaul Resource Allocation for Cell-Free Massive MIMO with Wireless Fronthaul

Wireless fronthaul is a key enabler of flexible and scalable cell-free massive MIMO systems, but its limited capacity poses significant challenges for maintaining high and uniform user performance. In this work, we analyze the performance of a cell-free massive MIMO network with wireless fronthaul under realistic low physical layer functional splits. We propose a joint access and fronthaul resource allocation algorithm that maximizes the minimum user equipment (UE) spectral efficiency while satisfying fronthaul load constraints. Our analysis reveals that power allocation over the wireless fronthaul follows a modified water-filling structure, where the water level is jointly determined by the access and fronthaul channel gains. Furthermore, we show that severe fronthaul limitations not only reduce UE rates but also introduce spatial performance disparities depending on the cloud location. Finally, we demonstrate that split option 8 is impractical under wireless fronthaul constraints, underscoring the importance of dynamic fronthaul bit allocation to reduce fronthaul load and enable efficient system operation.

eess.SP↗

arXiv2026

Rethinking Energy Efficiency in Cell-Free Massive MIMO: The Role of Processing and Optical Fronthaul

Cell-free massive MIMO promises uniformly high performance by combining densely distributed radio units, coherent transmission, and centralized processing. Unlike earlier radio generations, it depends on dense fronthaul connectivity and a virtualized cloud-RAN architecture. In this setting, energy use is no longer driven primarily by active radio components; instead, fronthaul and processing play a dominant role, calling for a fresh perspective on what defines energy efficiency. This work introduces a modular power model that captures the interplay between radios, fronthaul, and cloud processing. The analysis highlights how design choices, such as functional splits and precoding strategies, shape both fronthaul data load and total power consumption. Centralized precoding provides stronger performance with less resource utilization, while flexible activation of radios and processing elements avoids unnecessary overhead. Overall, the energy efficiency of cell-free massive MIMO grows as antennas are more densely distributed across the coverage area, particularly when combined with end-to-end resource allocation.

eess.SP↗

arXiv2026

RIS-Assisted Survivable Backhaul Recovery in Small-Cell Systems

The increasing densification of small-cell networks substantially expands cable-based backhaul infrastructure, creating heightened vulnerability to cable link failures. This paper proposes a reconfigurable intelligent surface (RIS)-assisted backup framework that exploits a key insight: during backhaul cable failures, base station (BS) radio components remain functional, enabling wireless backhaul traffic redistribution. Our framework maintains network connectivity by redistributing disconnected BS backhaul traffic to neighboring BSs through RIS-assisted wireless links. To maximize survivability across varying traffic conditions, we formulate a joint optimization problem that maximizes total resolvable backhaul traffic by jointly deciding BS selection, RIS phase shifts, and precoding vectors. The inherent non-convexity arising from coupling and quadratic fractional term is addressed through an alternating optimization algorithm that iteratively solves tractable convex subproblems via quadratic transformation. Comprehensive numerical evaluations demonstrate that the proposed RIS-enhanced framework significantly improves survivability from 58% to 72% under challenging high-intensity hotspot traffic conditions. Moreover, RIS provides the greatest gains for antenna-constrained systems by extending coverage to access more spare capacity of the distant BSs as well as enhancing the signal strength. Consequently, high survivability is achieved even with only two antennas per BS under moderate traffic intensity.

cs.IT↗

arXiv2026

Constant-Envelope Quantized Precoding with Power Control for Cell-Free Massive MIMO-OFDM

Cell-free massive MIMO has matured into a key candidate technology for 6G and beyond, owing to its ability to provide nearly uniform service quality to many user equipments (UEs) over the same time-frequency resources. Unlike conventional cellular massive MIMO, the core idea is to distribute a large number of low-cost access points (APs) across the network and enable joint coherent transmission and reception. While early works largely assumed ideal hardware, hardware impairments become inevitable when APs are implemented with low-cost components. In this context, this paper investigates the adverse impact of low-resolution digital-to-analog converters (DACs) on the downlink performance of cell-free massive MIMO-OFDM systems. In contrast to prior studies that mainly quantify spectral-efficiency degradation under low-resolution DACs, we consider the design of quantized constant-envelope (CE) precoding, which additionally enables the use of highly power-efficient amplifiers. To the best of our knowledge, this is the first work on quantized CE precoding for cell-free massive MIMO-OFDM. Beyond adapting the classical maximum-antenna-power method, we propose a novel power-control strategy across APs that mitigates the detrimental effects of severely quantized transmitters by reducing the contribution of harmful APs. Simulation results demonstrate that the proposed power-control mechanism significantly improves the uncoded bit error rate performance.

eess.SP↗

arXiv2026

Distributed Two-Phase Processing for Modular XL-MIMO with Wireless Fronthaul under Hardware Impairments

Modular extremely large-scale MIMO (XL-MIMO) architectures combined with wireless fronthaul provide a scalable alternative to monolithic arrays, but their performance is sensitive to hardware impairments and resource allocation strategies. In this paper, we consider a distributed two-phase processing framework for modular XL-MIMO systems employing amplify-and-forward wireless fronthaul under practical hardware constraints. We jointly model access-side and fronthaul-side distortions and formulate a weighted minimum mean-square error (WMMSE)-based optimization problem that maximizes the uplink sum spectral efficiency (SE) by jointly adjusting UE transmit powers and fronthaul amplification levels. The resulting algorithm alternates between distortion-aware receiver design and convex power-control updates. Numerical results demonstrate that the proposed joint optimization significantly improves spectral efficiency compared to fixed transmission strategies, particularly when the CPU has a moderate number of antennas, while also quantifying the relative impact of access and fronthaul impairments.

eess.SP↗

arXiv2026

Learning Energy-Efficient Modular Arrays under Hardware Non-linearities

This paper investigates the joint optimization of power allocation and antenna activation in sparse extremely large aperture array systems operating under power amplifier non-linearities. We first derive an analytical expression for the achievable spectral efficiency (SE) of point-to-point MIMO channels affected by non-linear distortions using the Bussgang decomposition. To address the combinatorial and non-convex nature of the energy-efficiency (EE) maximization problem, we employ an unsupervised deep neural network (DNN) that learns the non-linear mapping between the channel state information and the optimal EE operating point. The DNN jointly predicts distortion-aware power allocation, total transmit power scaling, and modular sub-array activation based on singular-value and geometric channel features. Numerical results demonstrate that the proposed DNN-based arrays achieve significant EE gains over the conventional sparse arrays.

eess.SP↗

arXiv2026

Network-Controlled Repeaters Under Power Amplifier Non-linearities

Network-controlled repeaters (NCRs) are a low-cost means to extend coverage and strengthen macro diversity in wireless networks. They operate in real time by amplifying and re-transmitting the incoming signal with only hardware-level delays, without requiring any channel state information (CSI) at the repeater itself. However, their power amplifiers (PAs) generate non-linear distortion that is jointly forwarded with the desired signal and can undermine multiuser performance unless the distortion statistics are exploited. This paper develops a distortion-aware (DA) uplink framework for repeater-assisted massive MIMO (RA-MIMO) under PA non-linearities. We adopt a memoryless third-order polynomial model for the repeater PA and characterize the achievable spectral efficiency (SE) using the Bussgang decomposition. Closed-form expressions are derived for the Bussgang gain matrix and the distortion covariance. We also design a DA combining vector that maximizes the effective signal-to-interference-plus-distortion ratio.

eess.SP↗

arXiv2026

Capacity Analysis of OFDM Systems with a Swarm of Network-Controlled Repeaters

This paper investigates the uplink capacity of single-input single-output (SISO) systems assisted by a swarm of network-controlled repeaters (NCRs). We develop a rigorous wideband formulation based on OFDM signaling. Starting from the continuous-time passband model, we derive the capacity expression for the repeater-assisted OFDM channel, accounting for amplified noise contributions from multiple repeaters. Numerical results demonstrate that NCRs can substantially enhance system capacity even with simple activation strategies, and that activating only the closest repeater yields nearly the same performance as activating all repeaters, thereby offering significant energy-saving opportunities. These findings highlight the potential of NCR swarms as a cost-effective and scalable solution for coverage extension and capacity enhancement in wideband wireless networks.

eess.SP↗

arXiv2026

Stream-Adaptive Quantization and Power Allocation in Fronthaul-Constrained MIMO Systems

Many wireless systems divide the baseband processing between two locations, interconnected by a fronthaul. This paper examines the impact of fronthaul quantization on multiple-input multiple-output (MIMO) systems. Starting from a Bussgang-based analysis of quantized single-input single-output (SISO) channels, we extend the framework to MIMO and derive a capacity lower bound under fronthaul quantization, where the receive combining is performed before the quantization. To maximize the sum rate, we propose a joint bit and power allocation (JBP-Alloc) scheme that efficiently distributes fronthaul bits and transmit power across active data streams. Asymptotic analysis shows that uniform bit allocation becomes optimal at high SNR. Numerical results confirm that JBP-Alloc outperforms uniform allocation and quantization-unaware water-filling, and achieves the same performance as Greedy bit allocation but with substantially lower computational complexity.

eess.SP↗

arXiv2026

Unlocking the Energy-Saving Potential in O-RAN Cell-Free Massive MIMO by Joint Orchestration of Radio, Wireless Fronthaul, and Cloud Resources

Network virtualization and cloudification in Open Radio Access Networks (O-RAN) enable joint orchestration of the processing and fronthaul resources, which are essential for realizing the energy-saving potential of cell-free massive MIMO networks. To harness this potential, we investigate cell-free massive MIMO deployed over an O-RAN architecture with a wireless fronthaul that removes the need for fiber deployment. We first model the end-to-end power consumption under wireless fronthaul. Then, we propose a joint orchestration framework for radio, fronthaul, and processing resources that minimizes end-to-end power consumption while satisfying user-equipment (UE) rate requirements and wireless-fronthaul constraints. Two algorithms are developed: a scenario-sampling/group-Lasso method for centralized precoding and a block-coordinate descent method for distributed precoding. Numerical results show that centralized precoding significantly outperforms distributed precoding. End-to-end resource orchestration provides up to 70% energy-savings compared to cloud-only orchestration and up to 15% compared to radio-only orchestration. Moreover, distributing the same total number of antennas across the coverage area, rather than concentrating them at a few radio units (RUs), substantially reduces network power consumption, demonstrating that cell-free massive MIMO can deliver both high performance and high energy efficiency in future mobile networks.

eess.SP↗